;;;; This file contains the definition of non-CLASS types (e.g. ;;;; subtypes of interesting BUILT-IN-CLASSes) and the interfaces to ;;;; the type system. Common Lisp type specifiers are parsed into a ;;;; somewhat canonical internal type representation that supports ;;;; type union, intersection, etc. (Except that ALIEN types have ;;;; moved out..) ;;;; This software is part of the SBCL system. See the README file for ;;;; more information. ;;;; ;;;; This software is derived from the CMU CL system, which was ;;;; written at Carnegie Mellon University and released into the ;;;; public domain. The software is in the public domain and is ;;;; provided with absolutely no warranty. See the COPYING and CREDITS ;;;; files for more information. (in-package "SB!KERNEL") (/show0 "late-type.lisp 19") (!begin-collecting-cold-init-forms) ;;; ### Remaining incorrectnesses: ;;; ;;; TYPE-UNION (and the OR type) doesn't properly canonicalize an ;;; exhaustive partition or coalesce contiguous ranges of numeric ;;; types. ;;; ;;; There are all sorts of nasty problems with open bounds on FLOAT ;;; types (and probably FLOAT types in general.) ;;; ;;; RATIO and BIGNUM are not recognized as numeric types. ;;; FIXME: This really should go away. Alas, it doesn't seem to be so ;;; simple to make it go away.. (See bug 123 in BUGS file.) (defvar *use-implementation-types* t ; actually initialized in cold init #!+sb-doc "*USE-IMPLEMENTATION-TYPES* is a semi-public flag which determines how restrictive we are in determining type membership. If two types are the same in the implementation, then we will consider them them the same when this switch is on. When it is off, we try to be as restrictive as the language allows, allowing us to detect more errors. Currently, this only affects array types.") (!cold-init-forms (setq *use-implementation-types* t)) ;;; These functions are used as method for types which need a complex ;;; subtypep method to handle some superclasses, but cover a subtree ;;; of the type graph (i.e. there is no simple way for any other type ;;; class to be a subtype.) There are always still complex ways, ;;; namely UNION and MEMBER types, so we must give TYPE1's method a ;;; chance to run, instead of immediately returning NIL, T. (defun delegate-complex-subtypep-arg2 (type1 type2) (let ((subtypep-arg1 (type-class-complex-subtypep-arg1 (type-class-info type1)))) (if subtypep-arg1 (funcall subtypep-arg1 type1 type2) (values nil t)))) (defun delegate-complex-intersection2 (type1 type2) (let ((method (type-class-complex-intersection2 (type-class-info type1)))) (if (and method (not (eq method #'delegate-complex-intersection2))) (funcall method type2 type1) (hierarchical-intersection2 type1 type2)))) ;;; This is used by !DEFINE-SUPERCLASSES to define the SUBTYPE-ARG1 ;;; method. INFO is a list of conses ;;; (SUPERCLASS-CLASS . {GUARD-TYPE-SPECIFIER | NIL}). (defun !has-superclasses-complex-subtypep-arg1 (type1 type2 info) ;; If TYPE2 might be concealing something related to our class ;; hierarchy (if (type-might-contain-other-types? type2) ;; too confusing, gotta punt (values nil nil) ;; ordinary case expected by old CMU CL code, where the taxonomy ;; of TYPE2's representation accurately reflects the taxonomy of ;; the underlying set (values ;; FIXME: This old CMU CL code probably deserves a comment ;; explaining to us mere mortals how it works... (and (sb!xc:typep type2 'sb!xc:class) (dolist (x info nil) (when (or (not (cdr x)) (csubtypep type1 (specifier-type (cdr x)))) (return (or (eq type2 (car x)) (let ((inherits (layout-inherits (class-layout (car x))))) (dotimes (i (length inherits) nil) (when (eq type2 (layout-class (svref inherits i))) (return t))))))))) t))) ;;; This function takes a list of specs, each of the form ;;; (SUPERCLASS-NAME &OPTIONAL GUARD). ;;; Consider one spec (with no guard): any instance of the named ;;; TYPE-CLASS is also a subtype of the named superclass and of any of ;;; its superclasses. If there are multiple specs, then some will have ;;; guards. We choose the first spec whose guard is a supertype of ;;; TYPE1 and use its superclass. In effect, a sequence of guards ;;; G0, G1, G2 ;;; is actually ;;; G0,(and G1 (not G0)), (and G2 (not (or G0 G1))). ;;; ;;; WHEN controls when the forms are executed. (defmacro !define-superclasses (type-class-name specs when) (let ((type-class (gensym "TYPE-CLASS-")) (info (gensym "INFO"))) `(,when (let ((,type-class (type-class-or-lose ',type-class-name)) (,info (mapcar (lambda (spec) (destructuring-bind (super &optional guard) spec (cons (sb!xc:find-class super) guard))) ',specs))) (setf (type-class-complex-subtypep-arg1 ,type-class) (lambda (type1 type2) (!has-superclasses-complex-subtypep-arg1 type1 type2 ,info))) (setf (type-class-complex-subtypep-arg2 ,type-class) #'delegate-complex-subtypep-arg2) (setf (type-class-complex-intersection2 ,type-class) #'delegate-complex-intersection2))))) ;;;; FUNCTION and VALUES types ;;;; ;;;; Pretty much all of the general type operations are illegal on ;;;; VALUES types, since we can't discriminate using them, do ;;;; SUBTYPEP, etc. FUNCTION types are acceptable to the normal type ;;;; operations, but are generally considered to be equivalent to ;;;; FUNCTION. These really aren't true types in any type theoretic ;;;; sense, but we still parse them into CTYPE structures for two ;;;; reasons: ;;;; -- Parsing and unparsing work the same way, and indeed we can't ;;;; tell whether a type is a function or values type without ;;;; parsing it. ;;;; -- Many of the places that can be annotated with real types can ;;;; also be annotated with function or values types. ;;; the description of a &KEY argument (defstruct (key-info #-sb-xc-host (:pure t) (:copier nil)) ;; the key (not necessarily a keyword in ANSI Common Lisp) (name (missing-arg) :type symbol) ;; the type of the argument value (type (missing-arg) :type ctype)) (!define-type-method (values :simple-subtypep :complex-subtypep-arg1) (type1 type2) (declare (ignore type2)) ;; FIXME: should be TYPE-ERROR, here and in next method (error "SUBTYPEP is illegal on this type:~% ~S" (type-specifier type1))) (!define-type-method (values :complex-subtypep-arg2) (type1 type2) (declare (ignore type1)) (error "SUBTYPEP is illegal on this type:~% ~S" (type-specifier type2))) (!define-type-method (values :unparse) (type) (cons 'values (unparse-args-types type))) ;;; Return true if LIST1 and LIST2 have the same elements in the same ;;; positions according to TYPE=. We return NIL, NIL if there is an ;;; uncertain comparison. (defun type=-list (list1 list2) (declare (list list1 list2)) (do ((types1 list1 (cdr types1)) (types2 list2 (cdr types2))) ((or (null types1) (null types2)) (if (or types1 types2) (values nil t) (values t t))) (multiple-value-bind (val win) (type= (first types1) (first types2)) (unless win (return (values nil nil))) (unless val (return (values nil t)))))) (!define-type-method (values :simple-=) (type1 type2) (let ((rest1 (args-type-rest type1)) (rest2 (args-type-rest type2))) (cond ((or (args-type-keyp type1) (args-type-keyp type2) (args-type-allowp type1) (args-type-allowp type2)) (values nil nil)) ((and rest1 rest2 (type/= rest1 rest2)) (type= rest1 rest2)) ((or rest1 rest2) (values nil t)) (t (multiple-value-bind (req-val req-win) (type=-list (values-type-required type1) (values-type-required type2)) (multiple-value-bind (opt-val opt-win) (type=-list (values-type-optional type1) (values-type-optional type2)) (values (and req-val opt-val) (and req-win opt-win)))))))) (!define-type-class function) ;;; a flag that we can bind to cause complex function types to be ;;; unparsed as FUNCTION. This is useful when we want a type that we ;;; can pass to TYPEP. (defvar *unparse-fun-type-simplify*) (!cold-init-forms (setq *unparse-fun-type-simplify* nil)) (!define-type-method (function :unparse) (type) (if *unparse-fun-type-simplify* 'function (list 'function (if (fun-type-wild-args type) '* (unparse-args-types type)) (type-specifier (fun-type-returns type))))) ;;; Since all function types are equivalent to FUNCTION, they are all ;;; subtypes of each other. (!define-type-method (function :simple-subtypep) (type1 type2) (declare (ignore type1 type2)) (values t t)) (!define-superclasses function ((function)) !cold-init-forms) ;;; The union or intersection of two FUNCTION types is FUNCTION. (!define-type-method (function :simple-union2) (type1 type2) (declare (ignore type1 type2)) (specifier-type 'function)) (!define-type-method (function :simple-intersection2) (type1 type2) (declare (ignore type1 type2)) (specifier-type 'function)) ;;; ### Not very real, but good enough for redefining transforms ;;; according to type: (!define-type-method (function :simple-=) (type1 type2) (values (equalp type1 type2) t)) (!define-type-class constant :inherits values) (!define-type-method (constant :unparse) (type) `(constant-arg ,(type-specifier (constant-type-type type)))) (!define-type-method (constant :simple-=) (type1 type2) (type= (constant-type-type type1) (constant-type-type type2))) (!def-type-translator constant-arg (type) (make-constant-type :type (specifier-type type))) ;;; Given a LAMBDA-LIST-like values type specification and an ARGS-TYPE ;;; structure, fill in the slots in the structure accordingly. This is ;;; used for both FUNCTION and VALUES types. (declaim (ftype (function (list args-type) (values)) parse-args-types)) (defun parse-args-types (lambda-list result) (multiple-value-bind (required optional restp rest keyp keys allowp aux) (parse-lambda-list lambda-list) (when aux (error "&AUX in a FUNCTION or VALUES type: ~S." lambda-list)) (setf (args-type-required result) (mapcar #'specifier-type required)) (setf (args-type-optional result) (mapcar #'specifier-type optional)) (setf (args-type-rest result) (if restp (specifier-type rest) nil)) (setf (args-type-keyp result) keyp) (collect ((key-info)) (dolist (key keys) (unless (proper-list-of-length-p key 2) (error "Keyword type description is not a two-list: ~S." key)) (let ((kwd (first key))) (when (find kwd (key-info) :key #'key-info-name) (error "~@" kwd lambda-list)) (key-info (make-key-info :name kwd :type (specifier-type (second key)))))) (setf (args-type-keywords result) (key-info))) (setf (args-type-allowp result) allowp) (values))) ;;; Return the lambda-list-like type specification corresponding ;;; to an ARGS-TYPE. (declaim (ftype (function (args-type) list) unparse-args-types)) (defun unparse-args-types (type) (collect ((result)) (dolist (arg (args-type-required type)) (result (type-specifier arg))) (when (args-type-optional type) (result '&optional) (dolist (arg (args-type-optional type)) (result (type-specifier arg)))) (when (args-type-rest type) (result '&rest) (result (type-specifier (args-type-rest type)))) (when (args-type-keyp type) (result '&key) (dolist (key (args-type-keywords type)) (result (list (key-info-name key) (type-specifier (key-info-type key)))))) (when (args-type-allowp type) (result '&allow-other-keys)) (result))) (!def-type-translator function (&optional (args '*) (result '*)) (let ((res (make-fun-type :returns (values-specifier-type result)))) (if (eq args '*) (setf (fun-type-wild-args res) t) (parse-args-types args res)) res)) (!def-type-translator values (&rest values) (let ((res (make-values-type))) (parse-args-types values res) res)) ;;;; VALUES types interfaces ;;;; ;;;; We provide a few special operations that can be meaningfully used ;;;; on VALUES types (as well as on any other type). ;;; Return the type of the first value indicated by TYPE. This is used ;;; by people who don't want to have to deal with VALUES types. #!-sb-fluid (declaim (freeze-type values-type)) ; (inline single-value-type)) (defun single-value-type (type) (declare (type ctype type)) (cond ((values-type-p type) (or (car (args-type-required type)) (if (args-type-optional type) (type-union (car (args-type-optional type)) (specifier-type 'null))) (args-type-rest type) (specifier-type 'null))) ((eq type *wild-type*) *universal-type*) (t type))) ;;; Return the minimum number of arguments that a function can be ;;; called with, and the maximum number or NIL. If not a function ;;; type, return NIL, NIL. (defun fun-type-nargs (type) (declare (type ctype type)) (if (fun-type-p type) (let ((fixed (length (args-type-required type)))) (if (or (args-type-rest type) (args-type-keyp type) (args-type-allowp type)) (values fixed nil) (values fixed (+ fixed (length (args-type-optional type)))))) (values nil nil))) ;;; Determine whether TYPE corresponds to a definite number of values. ;;; The first value is a list of the types for each value, and the ;;; second value is the number of values. If the number of values is ;;; not fixed, then return NIL and :UNKNOWN. (defun values-types (type) (declare (type ctype type)) (cond ((eq type *wild-type*) (values nil :unknown)) ((not (values-type-p type)) (values (list type) 1)) ((or (args-type-optional type) (args-type-rest type) (args-type-keyp type) (args-type-allowp type)) (values nil :unknown)) (t (let ((req (args-type-required type))) (values (mapcar #'single-value-type req) (length req)))))) ;;; Return two values: ;;; 1. A list of all the positional (fixed and optional) types. ;;; 2. The &REST type (if any). If keywords allowed, *UNIVERSAL-TYPE*. ;;; If no keywords or &REST, then the DEFAULT-TYPE. (defun values-type-types (type &optional (default-type *empty-type*)) (declare (type values-type type)) (values (append (args-type-required type) (args-type-optional type)) (cond ((args-type-keyp type) *universal-type*) ((args-type-rest type)) (t default-type)))) ;;; Return a list of OPERATION applied to the types in TYPES1 and ;;; TYPES2, padding with REST2 as needed. TYPES1 must not be shorter ;;; than TYPES2. The second value is T if OPERATION always returned a ;;; true second value. (defun fixed-values-op (types1 types2 rest2 operation) (declare (list types1 types2) (type ctype rest2) (type function operation)) (let ((exact t)) (values (mapcar (lambda (t1 t2) (multiple-value-bind (res win) (funcall operation t1 t2) (unless win (setq exact nil)) res)) types1 (append types2 (make-list (- (length types1) (length types2)) :initial-element rest2))) exact))) ;;; If Type isn't a values type, then make it into one: ;;; ==> (values type &rest t) (defun coerce-to-values (type) (declare (type ctype type)) (if (values-type-p type) type (make-values-type :required (list type) :rest *universal-type*))) ;;; Do the specified OPERATION on TYPE1 and TYPE2, which may be any ;;; type, including VALUES types. With VALUES types such as: ;;; (VALUES a0 a1) ;;; (VALUES b0 b1) ;;; we compute the more useful result ;;; (VALUES ( a0 b0) ( a1 b1)) ;;; rather than the precise result ;;; ( (values a0 a1) (values b0 b1)) ;;; This has the virtue of always keeping the VALUES type specifier ;;; outermost, and retains all of the information that is really ;;; useful for static type analysis. We want to know what is always ;;; true of each value independently. It is worthless to know that if ;;; the first value is B0 then the second will be B1. ;;; ;;; If the VALUES count signatures differ, then we produce a result with ;;; the required VALUE count chosen by NREQ when applied to the number ;;; of required values in TYPE1 and TYPE2. Any &KEY values become ;;; &REST T (anyone who uses keyword values deserves to lose.) ;;; ;;; The second value is true if the result is definitely empty or if ;;; OPERATION returned true as its second value each time we called ;;; it. Since we approximate the intersection of VALUES types, the ;;; second value being true doesn't mean the result is exact. (defun args-type-op (type1 type2 operation nreq default-type) (declare (type ctype type1 type2 default-type) (type function operation nreq)) (if (or (values-type-p type1) (values-type-p type2)) (let ((type1 (coerce-to-values type1)) (type2 (coerce-to-values type2))) (multiple-value-bind (types1 rest1) (values-type-types type1 default-type) (multiple-value-bind (types2 rest2) (values-type-types type2 default-type) (multiple-value-bind (rest rest-exact) (funcall operation rest1 rest2) (multiple-value-bind (res res-exact) (if (< (length types1) (length types2)) (fixed-values-op types2 types1 rest1 operation) (fixed-values-op types1 types2 rest2 operation)) (let* ((req (funcall nreq (length (args-type-required type1)) (length (args-type-required type2)))) (required (subseq res 0 req)) (opt (subseq res req)) (opt-last (position rest opt :test-not #'type= :from-end t))) (if (find *empty-type* required :test #'type=) (values *empty-type* t) (values (make-values-type :required required :optional (if opt-last (subseq opt 0 (1+ opt-last)) ()) :rest (if (eq rest default-type) nil rest)) (and rest-exact res-exact))))))))) (funcall operation type1 type2))) ;;; Do a union or intersection operation on types that might be values ;;; types. The result is optimized for utility rather than exactness, ;;; but it is guaranteed that it will be no smaller (more restrictive) ;;; than the precise result. ;;; ;;; The return convention seems to be analogous to ;;; TYPES-EQUAL-OR-INTERSECT. -- WHN 19990910. (defun-cached (values-type-union :hash-function type-cache-hash :hash-bits 8 :default nil :init-wrapper !cold-init-forms) ((type1 eq) (type2 eq)) (declare (type ctype type1 type2)) (cond ((or (eq type1 *wild-type*) (eq type2 *wild-type*)) *wild-type*) ((eq type1 *empty-type*) type2) ((eq type2 *empty-type*) type1) (t (values (args-type-op type1 type2 #'type-union #'min *empty-type*))))) (defun-cached (values-type-intersection :hash-function type-cache-hash :hash-bits 8 :values 2 :default (values nil :empty) :init-wrapper !cold-init-forms) ((type1 eq) (type2 eq)) (declare (type ctype type1 type2)) (cond ((eq type1 *wild-type*) (values type2 t)) ((eq type2 *wild-type*) (values type1 t)) (t (args-type-op type1 type2 #'type-intersection #'max (specifier-type 'null))))) ;;; This is like TYPES-EQUAL-OR-INTERSECT, except that it sort of ;;; works on VALUES types. Note that due to the semantics of ;;; VALUES-TYPE-INTERSECTION, this might return (VALUES T T) when ;;; there isn't really any intersection. (defun values-types-equal-or-intersect (type1 type2) (cond ((or (eq type1 *empty-type*) (eq type2 *empty-type*)) (values t t)) ((or (values-type-p type1) (values-type-p type2)) (multiple-value-bind (res win) (values-type-intersection type1 type2) (values (not (eq res *empty-type*)) win))) (t (types-equal-or-intersect type1 type2)))) ;;; a SUBTYPEP-like operation that can be used on any types, including ;;; VALUES types (defun-cached (values-subtypep :hash-function type-cache-hash :hash-bits 8 :values 2 :default (values nil :empty) :init-wrapper !cold-init-forms) ((type1 eq) (type2 eq)) (declare (type ctype type1 type2)) (cond ((eq type2 *wild-type*) (values t t)) ((eq type1 *wild-type*) (values (eq type2 *universal-type*) t)) ((not (values-types-equal-or-intersect type1 type2)) (values nil t)) (t (if (or (values-type-p type1) (values-type-p type2)) (let ((type1 (coerce-to-values type1)) (type2 (coerce-to-values type2))) (multiple-value-bind (types1 rest1) (values-type-types type1) (multiple-value-bind (types2 rest2) (values-type-types type2) (cond ((< (length (values-type-required type1)) (length (values-type-required type2))) (values nil t)) ((< (length types1) (length types2)) (values nil nil)) ((or (values-type-keyp type1) (values-type-keyp type2)) (values nil nil)) (t (do ((t1 types1 (rest t1)) (t2 types2 (rest t2))) ((null t2) (csubtypep rest1 rest2)) (multiple-value-bind (res win-p) (csubtypep (first t1) (first t2)) (unless win-p (return (values nil nil))) (unless res (return (values nil t)))))))))) (csubtypep type1 type2))))) ;;;; type method interfaces ;;; like SUBTYPEP, only works on CTYPE structures (defun-cached (csubtypep :hash-function type-cache-hash :hash-bits 8 :values 2 :default (values nil :empty) :init-wrapper !cold-init-forms) ((type1 eq) (type2 eq)) (declare (type ctype type1 type2)) (cond ((or (eq type1 type2) (eq type1 *empty-type*) (eq type2 *wild-type*)) (values t t)) ((eq type1 *wild-type*) (values nil t)) (t (!invoke-type-method :simple-subtypep :complex-subtypep-arg2 type1 type2 :complex-arg1 :complex-subtypep-arg1)))) ;;; Just parse the type specifiers and call CSUBTYPE. (defun sb!xc:subtypep (type1 type2) #!+sb-doc "Return two values indicating the relationship between type1 and type2. If values are T and T, type1 definitely is a subtype of type2. If values are NIL and T, type1 definitely is not a subtype of type2. If values are NIL and NIL, it couldn't be determined." (csubtypep (specifier-type type1) (specifier-type type2))) ;;; If two types are definitely equivalent, return true. The second ;;; value indicates whether the first value is definitely correct. ;;; This should only fail in the presence of HAIRY types. (defun-cached (type= :hash-function type-cache-hash :hash-bits 8 :values 2 :default (values nil :empty) :init-wrapper !cold-init-forms) ((type1 eq) (type2 eq)) (declare (type ctype type1 type2)) (if (eq type1 type2) (values t t) (!invoke-type-method :simple-= :complex-= type1 type2))) ;;; Not exactly the negation of TYPE=, since when the relationship is ;;; uncertain, we still return NIL, NIL. This is useful in cases where ;;; the conservative assumption is =. (defun type/= (type1 type2) (declare (type ctype type1 type2)) (multiple-value-bind (res win) (type= type1 type2) (if win (values (not res) t) (values nil nil)))) ;;; the type method dispatch case of TYPE-UNION2 (defun %type-union2 (type1 type2) ;; As in %TYPE-INTERSECTION2, it seems to be a good idea to give ;; both argument orders a chance at COMPLEX-INTERSECTION2. Unlike ;; %TYPE-INTERSECTION2, though, I don't have a specific case which ;; demonstrates this is actually necessary. Also unlike ;; %TYPE-INTERSECTION2, there seems to be no need to distinguish ;; between not finding a method and having a method return NIL. (flet ((1way (x y) (!invoke-type-method :simple-union2 :complex-union2 x y :default nil))) (declare (inline 1way)) (or (1way type1 type2) (1way type2 type1)))) ;;; Find a type which includes both types. Any inexactness is ;;; represented by the fuzzy element types; we return a single value ;;; that is precise to the best of our knowledge. This result is ;;; simplified into the canonical form, thus is not a UNION-TYPE ;;; unless we find no other way to represent the result. (defun-cached (type-union2 :hash-function type-cache-hash :hash-bits 8 :init-wrapper !cold-init-forms) ((type1 eq) (type2 eq)) ;; KLUDGE: This was generated from TYPE-INTERSECTION2 by Ye Olde Cut And ;; Paste technique of programming. If it stays around (as opposed to ;; e.g. fading away in favor of some CLOS solution) the shared logic ;; should probably become shared code. -- WHN 2001-03-16 (declare (type ctype type1 type2)) (cond ((eq type1 type2) type1) ((or (union-type-p type1) (union-type-p type2)) ;; Unions of UNION-TYPE should have the UNION-TYPE-TYPES ;; values broken out and united separately. The full TYPE-UNION ;; function knows how to do this, so let it handle it. (type-union type1 type2)) (t ;; the ordinary case: we dispatch to type methods (%type-union2 type1 type2)))) ;;; the type method dispatch case of TYPE-INTERSECTION2 (defun %type-intersection2 (type1 type2) ;; We want to give both argument orders a chance at ;; COMPLEX-INTERSECTION2. Without that, the old CMU CL type ;; methods could give noncommutative results, e.g. ;; (TYPE-INTERSECTION2 *EMPTY-TYPE* SOME-HAIRY-TYPE) ;; => NIL, NIL ;; (TYPE-INTERSECTION2 SOME-HAIRY-TYPE *EMPTY-TYPE*) ;; => #, T ;; We also need to distinguish between the case where we found a ;; type method, and it returned NIL, and the case where we fell ;; through without finding any type method. An example of the first ;; case is the intersection of a HAIRY-TYPE with some ordinary type. ;; An example of the second case is the intersection of two ;; completely-unrelated types, e.g. CONS and NUMBER, or SYMBOL and ;; ARRAY. ;; ;; (Why yes, CLOS probably *would* be nicer..) (flet ((1way (x y) (!invoke-type-method :simple-intersection2 :complex-intersection2 x y :default :no-type-method-found))) (declare (inline 1way)) (let ((xy (1way type1 type2))) (or (and (not (eql xy :no-type-method-found)) xy) (let ((yx (1way type2 type1))) (or (and (not (eql yx :no-type-method-found)) yx) (cond ((and (eql xy :no-type-method-found) (eql yx :no-type-method-found)) *empty-type*) (t (aver (and (not xy) (not yx))) ; else handled above nil)))))))) (defun-cached (type-intersection2 :hash-function type-cache-hash :hash-bits 8 :values 1 :default nil :init-wrapper !cold-init-forms) ((type1 eq) (type2 eq)) (declare (type ctype type1 type2)) (cond ((eq type1 type2) type1) ((or (intersection-type-p type1) (intersection-type-p type2)) ;; Intersections of INTERSECTION-TYPE should have the ;; INTERSECTION-TYPE-TYPES values broken out and intersected ;; separately. The full TYPE-INTERSECTION function knows how ;; to do that, so let it handle it. (type-intersection type1 type2)) (t ;; the ordinary case: we dispatch to type methods (%type-intersection2 type1 type2)))) ;;; Return as restrictive and simple a type as we can discover that is ;;; no more restrictive than the intersection of TYPE1 and TYPE2. At ;;; worst, we arbitrarily return one of the arguments as the first ;;; value (trying not to return a hairy type). (defun type-approx-intersection2 (type1 type2) (cond ((type-intersection2 type1 type2)) ((hairy-type-p type1) type2) (t type1))) ;;; a test useful for checking whether a derived type matches a ;;; declared type ;;; ;;; The first value is true unless the types don't intersect and ;;; aren't equal. The second value is true if the first value is ;;; definitely correct. NIL is considered to intersect with any type. ;;; If T is a subtype of either type, then we also return T, T. This ;;; way we recognize that hairy types might intersect with T. (defun types-equal-or-intersect (type1 type2) (declare (type ctype type1 type2)) (if (or (eq type1 *empty-type*) (eq type2 *empty-type*)) (values t t) (let ((intersection2 (type-intersection2 type1 type2))) (cond ((not intersection2) (if (or (csubtypep *universal-type* type1) (csubtypep *universal-type* type2)) (values t t) (values t nil))) ((eq intersection2 *empty-type*) (values nil t)) (t (values t t)))))) ;;; Return a Common Lisp type specifier corresponding to the TYPE ;;; object. (defun type-specifier (type) (declare (type ctype type)) (funcall (type-class-unparse (type-class-info type)) type)) ;;; (VALUES-SPECIFIER-TYPE and SPECIFIER-TYPE moved from here to ;;; early-type.lisp by WHN ca. 19990201.) ;;; Take a list of type specifiers, computing the translation of each ;;; specifier and defining it as a builtin type. (declaim (ftype (function (list) (values)) precompute-types)) (defun precompute-types (specs) (dolist (spec specs) (let ((res (specifier-type spec))) (unless (unknown-type-p res) (setf (info :type :builtin spec) res) (setf (info :type :kind spec) :primitive)))) (values)) ;;;; general TYPE-UNION and TYPE-INTERSECTION operations ;;;; ;;;; These are fully general operations on CTYPEs: they'll always ;;;; return a CTYPE representing the result. ;;; shared logic for unions and intersections: Stuff TYPE into the ;;; vector TYPES, finding pairs of types which can be simplified by ;;; SIMPLIFY2 (TYPE-UNION2 or TYPE-INTERSECTION2) and replacing them ;;; by their simplified forms. (defun accumulate1-compound-type (type types %compound-type-p simplify2) (declare (type ctype type)) (declare (type (vector ctype) types)) (declare (type function simplify2)) ;; Any input object satisfying %COMPOUND-TYPE-P should've been ;; broken into components before it reached us. (aver (not (funcall %compound-type-p type))) (dotimes (i (length types) (vector-push-extend type types)) (let ((simplified2 (funcall simplify2 type (aref types i)))) (when simplified2 ;; Discard the old (AREF TYPES I). (setf (aref types i) (vector-pop types)) ;; Merge the new SIMPLIFIED2 into TYPES, by tail recursing. ;; (Note that the tail recursion is indirect: we go through ;; ACCUMULATE, not ACCUMULATE1, so that if SIMPLIFIED2 is ;; handled properly if it satisfies %COMPOUND-TYPE-P.) (return (accumulate-compound-type simplified2 types %compound-type-p simplify2))))) ;; Voila. (values)) ;;; shared logic for unions and intersections: Use ;;; ACCUMULATE1-COMPOUND-TYPE to merge TYPE into TYPES, either ;;; all in one step or, if %COMPOUND-TYPE-P is satisfied, ;;; component by component. (defun accumulate-compound-type (type types %compound-type-p simplify2) (declare (type function %compound-type-p simplify2)) (flet ((accumulate1 (x) (accumulate1-compound-type x types %compound-type-p simplify2))) (declare (inline accumulate1)) (if (funcall %compound-type-p type) (map nil #'accumulate1 (compound-type-types type)) (accumulate1 type))) (values)) ;;; shared logic for unions and intersections: Return a vector of ;;; types representing the same types as INPUT-TYPES, but with ;;; COMPOUND-TYPEs satisfying %COMPOUND-TYPE-P broken up into their ;;; component types, and with any SIMPLY2 simplifications applied. (defun simplified-compound-types (input-types %compound-type-p simplify2) (let ((simplified-types (make-array (length input-types) :fill-pointer 0 :adjustable t :element-type 'ctype ;; (This INITIAL-ELEMENT shouldn't ;; matter, but helps avoid type ;; warnings at compile time.) :initial-element *empty-type*))) (dolist (input-type input-types) (accumulate-compound-type input-type simplified-types %compound-type-p simplify2)) simplified-types)) ;;; shared logic for unions and intersections: Make a COMPOUND-TYPE ;;; object whose components are the types in TYPES, or skip to special ;;; cases when TYPES is short. (defun make-compound-type-or-something (constructor types enumerable identity) (declare (type function constructor)) (declare (type (vector ctype) types)) (declare (type ctype identity)) (case (length types) (0 identity) (1 (aref types 0)) (t (funcall constructor enumerable ;; FIXME: This should be just (COERCE TYPES 'LIST), but as ;; of sbcl-0.6.11.17 the COERCE optimizer is really ;; brain-dead, so that would generate a full call to ;; SPECIFIER-TYPE at runtime, so we get into bootstrap ;; problems in cold init because 'LIST is a compound ;; type, so we need to MAKE-COMPOUND-TYPE-OR-SOMETHING ;; before we know what 'LIST is. Once the COERCE ;; optimizer is less brain-dead, we can make this ;; (COERCE TYPES 'LIST) again. #+sb-xc-host (coerce types 'list) #-sb-xc-host (coerce-to-list types))))) (defun type-intersection (&rest input-types) (let ((simplified-types (simplified-compound-types input-types #'intersection-type-p #'type-intersection2))) (declare (type (vector ctype) simplified-types)) ;; We want to have a canonical representation of types (or failing ;; that, punt to HAIRY-TYPE). Canonical representation would have ;; intersections inside unions but not vice versa, since you can ;; always achieve that by the distributive rule. But we don't want ;; to just apply the distributive rule, since it would be too easy ;; to end up with unreasonably huge type expressions. So instead ;; we punt to HAIRY-TYPE when this comes up. (if (and (> (length simplified-types) 1) (some #'union-type-p simplified-types)) (make-hairy-type :specifier `(and ,@(map 'list #'type-specifier simplified-types))) (make-compound-type-or-something #'%make-intersection-type simplified-types (some #'type-enumerable simplified-types) *universal-type*)))) (defun type-union (&rest input-types) (let ((simplified-types (simplified-compound-types input-types #'union-type-p #'type-union2))) (make-compound-type-or-something #'%make-union-type simplified-types (every #'type-enumerable simplified-types) *empty-type*))) ;;;; built-in types (!define-type-class named) (defvar *wild-type*) (defvar *empty-type*) (defvar *universal-type*) (defvar *universal-fun-type*) (!cold-init-forms (macrolet ((frob (name var) `(progn (setq ,var (make-named-type :name ',name)) (setf (info :type :kind ',name) :primitive) (setf (info :type :builtin ',name) ,var)))) ;; KLUDGE: In ANSI, * isn't really the name of a type, it's just a ;; special symbol which can be stuck in some places where an ;; ordinary type can go, e.g. (ARRAY * 1) instead of (ARRAY T 1). ;; At some point, in order to become more standard, we should ;; convert all the classic CMU CL legacy *s and *WILD-TYPE*s into ;; Ts and *UNIVERSAL-TYPE*s. (frob * *wild-type*) (frob nil *empty-type*) (frob t *universal-type*)) (setf *universal-fun-type* (make-fun-type :wild-args t :returns *wild-type*))) (!define-type-method (named :simple-=) (type1 type2) ;; FIXME: BUG 85: This assertion failed when I added it in ;; sbcl-0.6.11.13. It probably shouldn't fail; but for now it's ;; just commented out. ;;(aver (not (eq type1 *wild-type*))) ; * isn't really a type. (values (eq type1 type2) t)) (!define-type-method (named :simple-subtypep) (type1 type2) (aver (not (eq type1 *wild-type*))) ; * isn't really a type. (values (or (eq type1 *empty-type*) (eq type2 *wild-type*)) t)) (!define-type-method (named :complex-subtypep-arg1) (type1 type2) (aver (not (eq type1 *wild-type*))) ; * isn't really a type. (cond ((eq type1 *empty-type*) t) (;; When TYPE2 might be the universal type in disguise (type-might-contain-other-types? type2) ;; Now that the UNION and HAIRY COMPLEX-SUBTYPEP-ARG2 methods ;; can delegate to us (more or less as CALL-NEXT-METHOD) when ;; they're uncertain, we can't just barf on COMPOUND-TYPE and ;; HAIRY-TYPEs as we used to. Instead we deal with the ;; problem (where at least part of the problem is cases like ;; (SUBTYPEP T '(SATISFIES FOO)) ;; or ;; (SUBTYPEP T '(AND (SATISFIES FOO) (SATISFIES BAR))) ;; where the second type is a hairy type like SATISFIES, or ;; is a compound type which might contain a hairy type) by ;; returning uncertainty. (values nil nil)) (t ;; By elimination, TYPE1 is the universal type. (aver (eq type1 *universal-type*)) ;; This case would have been picked off by the SIMPLE-SUBTYPEP ;; method, and so shouldn't appear here. (aver (not (eq type2 *universal-type*))) ;; Since TYPE2 is not EQ *UNIVERSAL-TYPE* and is not the ;; universal type in disguise, TYPE2 is not a superset of TYPE1. (values nil t)))) (!define-type-method (named :complex-subtypep-arg2) (type1 type2) (aver (not (eq type2 *wild-type*))) ; * isn't really a type. (cond ((eq type2 *universal-type*) (values t t)) ((hairy-type-p type1) (invoke-complex-subtypep-arg1-method type1 type2)) (t ;; FIXME: This seems to rely on there only being 2 or 3 ;; HAIRY-TYPE values, and the exclusion of various ;; possibilities above. It would be good to explain it and/or ;; rewrite it so that it's clearer. (values (not (eq type2 *empty-type*)) t)))) (!define-type-method (named :complex-intersection2) (type1 type2) ;; FIXME: This assertion failed when I added it in sbcl-0.6.11.13. ;; Perhaps when bug 85 is fixed it can be reenabled. ;;(aver (not (eq type2 *wild-type*))) ; * isn't really a type. (hierarchical-intersection2 type1 type2)) (!define-type-method (named :complex-union2) (type1 type2) ;; Perhaps when bug 85 is fixed this can be reenabled. ;;(aver (not (eq type2 *wild-type*))) ; * isn't really a type. (hierarchical-union2 type1 type2)) (!define-type-method (named :unparse) (x) (named-type-name x)) ;;;; hairy and unknown types (!define-type-method (hairy :unparse) (x) (hairy-type-specifier x)) (!define-type-method (hairy :simple-subtypep) (type1 type2) (let ((hairy-spec1 (hairy-type-specifier type1)) (hairy-spec2 (hairy-type-specifier type2))) (cond ((and (consp hairy-spec1) (eq (car hairy-spec1) 'not) (consp hairy-spec2) (eq (car hairy-spec2) 'not)) (csubtypep (specifier-type (cadr hairy-spec2)) (specifier-type (cadr hairy-spec1)))) ((equal hairy-spec1 hairy-spec2) (values t t)) (t (values nil nil))))) (!define-type-method (hairy :complex-subtypep-arg2) (type1 type2) (let ((hairy-spec (hairy-type-specifier type2))) (cond ((and (consp hairy-spec) (eq (car hairy-spec) 'not)) (let* ((complement-type2 (specifier-type (cadr hairy-spec))) (intersection2 (type-intersection2 type1 complement-type2))) (if intersection2 (values (eq intersection2 *empty-type*) t) (invoke-complex-subtypep-arg1-method type1 type2)))) (t (invoke-complex-subtypep-arg1-method type1 type2))))) (!define-type-method (hairy :complex-subtypep-arg1) (type1 type2) ;; "Incrementally extended heuristic algorithms tend inexorably toward the ;; incomprehensible." -- http://www.unlambda.com/~james/lambda/lambda.txt (let ((hairy-spec (hairy-type-specifier type1))) (cond ((and (consp hairy-spec) (eq (car hairy-spec) 'not)) ;; You may not believe this. I couldn't either. But then I ;; sat down and drew lots of Venn diagrams. Comments ;; involving a and b refer to the call (subtypep '(not a) ;; 'b) -- CSR, 2002-02-27. (block nil ;; (Several logical truths in this block are true as ;; long as b/=T. As of sbcl-0.7.1.28, it seems ;; impossible to construct a case with b=T where we ;; actually reach this type method, but we'll test for ;; and exclude this case anyway, since future ;; maintenance might make it possible for it to end up ;; in this code.) (multiple-value-bind (equal certain) (type= type2 (specifier-type t)) (unless certain (return (values nil nil))) (when equal (return (values t t)))) (let ((complement-type1 (specifier-type (cadr hairy-spec)))) ;; Do the special cases first, in order to give us a ;; chance if subtype/supertype relationships are hairy. (multiple-value-bind (equal certain) (type= complement-type1 type2) ;; If a = b, ~a is not a subtype of b (unless b=T, ;; which was excluded above). (unless certain (return (values nil nil))) (when equal (return (values nil t)))) ;; KLUDGE: ANSI requires that the SUBTYPEP result ;; between any two built-in atomic type specifiers ;; never be uncertain. This is hard to do cleanly for ;; the built-in types whose definitions include ;; (NOT FOO), i.e. CONS and RATIO. However, we can do ;; it with this hack, which uses our global knowledge ;; that our implementation of the type system uses ;; disjoint implementation types to represent disjoint ;; sets (except when types are contained in other types). ;; (This is a KLUDGE because it's fragile. Various ;; changes in internal representation in the type ;; system could make it start confidently returning ;; incorrect results.) -- WHN 2002-03-08 (unless (or (type-might-contain-other-types? complement-type1) (type-might-contain-other-types? type2)) ;; Because of the way our types which don't contain ;; other types are disjoint subsets of the space of ;; possible values, (SUBTYPEP '(NOT AA) 'B)=NIL when ;; AA and B are simple (and B is not T, as checked above). (return (values nil t))) ;; The old (TYPE= TYPE1 TYPE2) branch would never be ;; taken, as TYPE1 and TYPE2 will only be equal if ;; they're both NOT types, and then the ;; :SIMPLE-SUBTYPEP method would be used instead. ;; But a CSUBTYPEP relationship might still hold: (multiple-value-bind (equal certain) (csubtypep complement-type1 type2) ;; If a is a subtype of b, ~a is not a subtype of b ;; (unless b=T, which was excluded above). (unless certain (return (values nil nil))) (when equal (return (values nil t)))) (multiple-value-bind (equal certain) (csubtypep type2 complement-type1) ;; If b is a subtype of a, ~a is not a subtype of b. ;; (FIXME: That's not true if a=T. Do we know at ;; this point that a is not T?) (unless certain (return (values nil nil))) (when equal (return (values nil t)))) ;; old CSR comment ca. 0.7.2, now obsoleted by the ;; SIMPLE-CTYPE? KLUDGE case above: ;; Other cases here would rely on being able to catch ;; all possible cases, which the fragility of this ;; type system doesn't inspire me; for instance, if a ;; is type= to ~b, then we want T, T; if this is not ;; the case and the types are disjoint (have an ;; intersection of *empty-type*) then we want NIL, T; ;; else if the union of a and b is the ;; *universal-type* then we want T, T. So currently we ;; still claim to be unsure about e.g. (subtypep '(not ;; fixnum) 'single-float). ))) (t (values nil nil))))) (!define-type-method (hairy :complex-=) (type1 type2) (declare (ignore type1 type2)) (values nil nil)) (!define-type-method (hairy :simple-intersection2 :complex-intersection2) (type1 type2) (declare (ignore type1 type2)) nil) (!define-type-method (hairy :simple-=) (type1 type2) (if (equal (hairy-type-specifier type1) (hairy-type-specifier type2)) (values t t) (values nil nil))) (!def-type-translator not (&whole whole type) (declare (ignore type)) ;; Check legality of arguments. (destructuring-bind (not typespec) whole (declare (ignore not)) (let ((spec (type-specifier (specifier-type typespec)))) ; must be legal typespec (if (and (listp spec) (eq (car spec) 'not)) ;; canonicalize (not (not foo)) (specifier-type (cadr spec)) (make-hairy-type :specifier whole))))) (!def-type-translator satisfies (&whole whole fun) (declare (ignore fun)) ;; Check legality of arguments. (destructuring-bind (satisfies predicate-name) whole (declare (ignore satisfies)) (unless (symbolp predicate-name) (error 'simple-type-error :datum predicate-name :expected-type 'symbol :format-control "~S is not a symbol." :format-arguments (list predicate-name)))) ;; Create object. (make-hairy-type :specifier whole)) ;;;; numeric types (!define-type-class number) (!define-type-method (number :simple-=) (type1 type2) (values (and (eq (numeric-type-class type1) (numeric-type-class type2)) (eq (numeric-type-format type1) (numeric-type-format type2)) (eq (numeric-type-complexp type1) (numeric-type-complexp type2)) (equal (numeric-type-low type1) (numeric-type-low type2)) (equal (numeric-type-high type1) (numeric-type-high type2))) t)) (!define-type-method (number :unparse) (type) (let* ((complexp (numeric-type-complexp type)) (low (numeric-type-low type)) (high (numeric-type-high type)) (base (case (numeric-type-class type) (integer 'integer) (rational 'rational) (float (or (numeric-type-format type) 'float)) (t 'real)))) (let ((base+bounds (cond ((and (eq base 'integer) high low) (let ((high-count (logcount high)) (high-length (integer-length high))) (cond ((= low 0) (cond ((= high 0) '(integer 0 0)) ((= high 1) 'bit) ((and (= high-count high-length) (plusp high-length)) `(unsigned-byte ,high-length)) (t `(mod ,(1+ high))))) ((and (= low sb!xc:most-negative-fixnum) (= high sb!xc:most-positive-fixnum)) 'fixnum) ((and (= low (lognot high)) (= high-count high-length) (> high-count 0)) `(signed-byte ,(1+ high-length))) (t `(integer ,low ,high))))) (high `(,base ,(or low '*) ,high)) (low (if (and (eq base 'integer) (= low 0)) 'unsigned-byte `(,base ,low))) (t base)))) (ecase complexp (:real base+bounds) (:complex (if (eq base+bounds 'real) 'complex `(complex ,base+bounds))) ((nil) (aver (eq base+bounds 'real)) 'number))))) ;;; Return true if X is "less than or equal" to Y, taking open bounds ;;; into consideration. CLOSED is the predicate used to test the bound ;;; on a closed interval (e.g. <=), and OPEN is the predicate used on ;;; open bounds (e.g. <). Y is considered to be the outside bound, in ;;; the sense that if it is infinite (NIL), then the test succeeds, ;;; whereas if X is infinite, then the test fails (unless Y is also ;;; infinite). ;;; ;;; This is for comparing bounds of the same kind, e.g. upper and ;;; upper. Use NUMERIC-BOUND-TEST* for different kinds of bounds. #!-negative-zero-is-not-zero (defmacro numeric-bound-test (x y closed open) `(cond ((not ,y) t) ((not ,x) nil) ((consp ,x) (if (consp ,y) (,closed (car ,x) (car ,y)) (,closed (car ,x) ,y))) (t (if (consp ,y) (,open ,x (car ,y)) (,closed ,x ,y))))) #!+negative-zero-is-not-zero (defmacro numeric-bound-test-zero (op x y) `(if (and (zerop ,x) (zerop ,y) (floatp ,x) (floatp ,y)) (,op (float-sign ,x) (float-sign ,y)) (,op ,x ,y))) #!+negative-zero-is-not-zero (defmacro numeric-bound-test (x y closed open) `(cond ((not ,y) t) ((not ,x) nil) ((consp ,x) (if (consp ,y) (numeric-bound-test-zero ,closed (car ,x) (car ,y)) (numeric-bound-test-zero ,closed (car ,x) ,y))) (t (if (consp ,y) (numeric-bound-test-zero ,open ,x (car ,y)) (numeric-bound-test-zero ,closed ,x ,y))))) ;;; This is used to compare upper and lower bounds. This is different ;;; from the same-bound case: ;;; -- Since X = NIL is -infinity, whereas y = NIL is +infinity, we ;;; return true if *either* arg is NIL. ;;; -- an open inner bound is "greater" and also squeezes the interval, ;;; causing us to use the OPEN test for those cases as well. #!-negative-zero-is-not-zero (defmacro numeric-bound-test* (x y closed open) `(cond ((not ,y) t) ((not ,x) t) ((consp ,x) (if (consp ,y) (,open (car ,x) (car ,y)) (,open (car ,x) ,y))) (t (if (consp ,y) (,open ,x (car ,y)) (,closed ,x ,y))))) #!+negative-zero-is-not-zero (defmacro numeric-bound-test* (x y closed open) `(cond ((not ,y) t) ((not ,x) t) ((consp ,x) (if (consp ,y) (numeric-bound-test-zero ,open (car ,x) (car ,y)) (numeric-bound-test-zero ,open (car ,x) ,y))) (t (if (consp ,y) (numeric-bound-test-zero ,open ,x (car ,y)) (numeric-bound-test-zero ,closed ,x ,y))))) ;;; Return whichever of the numeric bounds X and Y is "maximal" ;;; according to the predicates CLOSED (e.g. >=) and OPEN (e.g. >). ;;; This is only meaningful for maximizing like bounds, i.e. upper and ;;; upper. If MAX-P is true, then we return NIL if X or Y is NIL, ;;; otherwise we return the other arg. (defmacro numeric-bound-max (x y closed open max-p) (once-only ((n-x x) (n-y y)) `(cond ((not ,n-x) ,(if max-p nil n-y)) ((not ,n-y) ,(if max-p nil n-x)) ((consp ,n-x) (if (consp ,n-y) (if (,closed (car ,n-x) (car ,n-y)) ,n-x ,n-y) (if (,open (car ,n-x) ,n-y) ,n-x ,n-y))) (t (if (consp ,n-y) (if (,open (car ,n-y) ,n-x) ,n-y ,n-x) (if (,closed ,n-y ,n-x) ,n-y ,n-x)))))) (!define-type-method (number :simple-subtypep) (type1 type2) (let ((class1 (numeric-type-class type1)) (class2 (numeric-type-class type2)) (complexp2 (numeric-type-complexp type2)) (format2 (numeric-type-format type2)) (low1 (numeric-type-low type1)) (high1 (numeric-type-high type1)) (low2 (numeric-type-low type2)) (high2 (numeric-type-high type2))) ;; If one is complex and the other isn't, they are disjoint. (cond ((not (or (eq (numeric-type-complexp type1) complexp2) (null complexp2))) (values nil t)) ;; If the classes are specified and different, the types are ;; disjoint unless type2 is rational and type1 is integer. ((not (or (eq class1 class2) (null class2) (and (eq class1 'integer) (eq class2 'rational)))) (values nil t)) ;; If the float formats are specified and different, the types ;; are disjoint. ((not (or (eq (numeric-type-format type1) format2) (null format2))) (values nil t)) ;; Check the bounds. ((and (numeric-bound-test low1 low2 >= >) (numeric-bound-test high1 high2 <= <)) (values t t)) (t (values nil t))))) (!define-superclasses number ((generic-number)) !cold-init-forms) ;;; If the high bound of LOW is adjacent to the low bound of HIGH, ;;; then return true, otherwise NIL. (defun numeric-types-adjacent (low high) (let ((low-bound (numeric-type-high low)) (high-bound (numeric-type-low high))) (cond ((not (and low-bound high-bound)) nil) ((and (consp low-bound) (consp high-bound)) nil) ((consp low-bound) #!-negative-zero-is-not-zero (let ((low-value (car low-bound))) (or (eql low-value high-bound) (and (eql low-value -0f0) (eql high-bound 0f0)) (and (eql low-value 0f0) (eql high-bound -0f0)) (and (eql low-value -0d0) (eql high-bound 0d0)) (and (eql low-value 0d0) (eql high-bound -0d0)))) #!+negative-zero-is-not-zero (eql (car low-bound) high-bound)) ((consp high-bound) #!-negative-zero-is-not-zero (let ((high-value (car high-bound))) (or (eql high-value low-bound) (and (eql high-value -0f0) (eql low-bound 0f0)) (and (eql high-value 0f0) (eql low-bound -0f0)) (and (eql high-value -0d0) (eql low-bound 0d0)) (and (eql high-value 0d0) (eql low-bound -0d0)))) #!+negative-zero-is-not-zero (eql (car high-bound) low-bound)) #!+negative-zero-is-not-zero ((or (and (eql low-bound -0f0) (eql high-bound 0f0)) (and (eql low-bound -0d0) (eql high-bound 0d0)))) ((and (eq (numeric-type-class low) 'integer) (eq (numeric-type-class high) 'integer)) (eql (1+ low-bound) high-bound)) (t nil)))) ;;; Return a numeric type that is a supertype for both TYPE1 and TYPE2. ;;; ;;; ### Note: we give up early to keep from dropping lots of information on ;;; the floor by returning overly general types. (!define-type-method (number :simple-union2) (type1 type2) (declare (type numeric-type type1 type2)) (cond ((csubtypep type1 type2) type2) ((csubtypep type2 type1) type1) (t (let ((class1 (numeric-type-class type1)) (format1 (numeric-type-format type1)) (complexp1 (numeric-type-complexp type1)) (class2 (numeric-type-class type2)) (format2 (numeric-type-format type2)) (complexp2 (numeric-type-complexp type2))) (when (and (eq class1 class2) (eq format1 format2) (eq complexp1 complexp2) (or (numeric-types-intersect type1 type2) (numeric-types-adjacent type1 type2) (numeric-types-adjacent type2 type1))) (make-numeric-type :class class1 :format format1 :complexp complexp1 :low (numeric-bound-max (numeric-type-low type1) (numeric-type-low type2) <= < t) :high (numeric-bound-max (numeric-type-high type1) (numeric-type-high type2) >= > t))))))) (!cold-init-forms (setf (info :type :kind 'number) :primitive) (setf (info :type :builtin 'number) (make-numeric-type :complexp nil))) (!def-type-translator complex (&optional (typespec '*)) (if (eq typespec '*) (make-numeric-type :complexp :complex) (labels ((not-numeric () (error "The component type for COMPLEX is not numeric: ~S" typespec)) (not-real () (error "The component type for COMPLEX is not real: ~S" typespec)) (complex1 (component-type) (unless (numeric-type-p component-type) (not-numeric)) (when (eq (numeric-type-complexp component-type) :complex) (not-real)) (modified-numeric-type component-type :complexp :complex)) (complex-union (component) (unless (numberp component) (not-numeric)) ;; KLUDGE: This TYPECASE more or less does ;; (UPGRADED-COMPLEX-PART-TYPE (TYPE-OF COMPONENT)), ;; (plus a small hack to treat (EQL COMPONENT 0) specially) ;; but uses logic cut and pasted from the DEFUN of ;; UPGRADED-COMPLEX-PART-TYPE. That's fragile, because ;; changing the definition of UPGRADED-COMPLEX-PART-TYPE ;; would tend to break the code here. Unfortunately, ;; though, reusing UPGRADED-COMPLEX-PART-TYPE here ;; would cause another kind of fragility, because ;; ANSI's definition of TYPE-OF is so weak that e.g. ;; (UPGRADED-COMPLEX-PART-TYPE (TYPE-OF 1/2)) could ;; end up being (UPGRADED-COMPLEX-PART-TYPE 'REAL) ;; instead of (UPGRADED-COMPLEX-PART-TYPE 'RATIONAL). ;; So using TYPE-OF would mean that ANSI-conforming ;; maintenance changes in TYPE-OF could break the code here. ;; It's not clear how best to fix this. -- WHN 2002-01-21, ;; trying to summarize CSR's concerns in his patch (typecase component (complex (error "The component type for COMPLEX (EQL X) ~ is complex: ~S" component)) ((eql 0) (specifier-type nil)) ; as required by ANSI (single-float (specifier-type '(complex single-float))) (double-float (specifier-type '(complex double-float))) #!+long-float (long-float (specifier-type '(complex long-float))) (rational (specifier-type '(complex rational))) (t (specifier-type '(complex real)))))) (let ((ctype (specifier-type typespec))) (typecase ctype (numeric-type (complex1 ctype)) (union-type (apply #'type-union ;; FIXME: This code could suffer from ;; (admittedly very obscure) cases of ;; bug 145 e.g. when TYPE is ;; (OR (AND INTEGER (SATISFIES ODDP)) ;; (AND FLOAT (SATISFIES FOO)) ;; and not even report the problem very well. (mapcar #'complex1 (union-type-types ctype)))) ;; MEMBER-TYPE is almost the same as UNION-TYPE, but ;; there's a gotcha: (COMPLEX (EQL 0)) is, according to ;; ANSI, equal to type NIL, the empty set. (member-type (apply #'type-union (mapcar #'complex-union (member-type-members ctype)))) (t (multiple-value-bind (subtypep certainly) (csubtypep ctype (specifier-type 'real)) (if (and (not subtypep) certainly) (not-real) ;; ANSI just says that TYPESPEC is any subtype of ;; type REAL, not necessarily a NUMERIC-TYPE. In ;; particular, at this point TYPESPEC could legally be ;; an intersection type like (AND REAL (SATISFIES ODDP)), ;; in which case we fall through the logic above and ;; end up here, stumped. (bug "~@<(known bug #145): The type ~S is too hairy to be used for a COMPLEX component.~:@>" typespec))))))))) ;;; If X is *, return NIL, otherwise return the bound, which must be a ;;; member of TYPE or a one-element list of a member of TYPE. #!-sb-fluid (declaim (inline canonicalized-bound)) (defun canonicalized-bound (bound type) (cond ((eq bound '*) nil) ((or (sb!xc:typep bound type) (and (consp bound) (sb!xc:typep (car bound) type) (null (cdr bound)))) bound) (t (error "Bound is not ~S, a ~S or a list of a ~S: ~S" '* type type bound)))) (!def-type-translator integer (&optional (low '*) (high '*)) (let* ((l (canonicalized-bound low 'integer)) (lb (if (consp l) (1+ (car l)) l)) (h (canonicalized-bound high 'integer)) (hb (if (consp h) (1- (car h)) h))) (if (and hb lb (< hb lb)) ;; previously we threw an error here: ;; (error "Lower bound ~S is greater than upper bound ~S." l h)) ;; but ANSI doesn't say anything about that, so: (specifier-type 'nil) (make-numeric-type :class 'integer :complexp :real :enumerable (not (null (and l h))) :low lb :high hb)))) (defmacro !def-bounded-type (type class format) `(!def-type-translator ,type (&optional (low '*) (high '*)) (let ((lb (canonicalized-bound low ',type)) (hb (canonicalized-bound high ',type))) (if (not (numeric-bound-test* lb hb <= <)) ;; as above, previously we did ;; (error "Lower bound ~S is not less than upper bound ~S." low high)) ;; but it is correct to do (specifier-type 'nil) (make-numeric-type :class ',class :format ',format :low lb :high hb))))) (!def-bounded-type rational rational nil) ;;; Unlike CMU CL, we represent the types FLOAT and REAL as ;;; UNION-TYPEs of more primitive types, in order to make ;;; type representation more unique, avoiding problems in the ;;; simplification of things like ;;; (subtypep '(or (single-float -1.0 1.0) (single-float 0.1)) ;;; '(or (real -1 7) (single-float 0.1) (single-float -1.0 1.0))) ;;; When we allowed REAL to remain as a separate NUMERIC-TYPE, ;;; it was too easy for the first argument to be simplified to ;;; '(SINGLE-FLOAT -1.0), and for the second argument to be simplified ;;; to '(OR (REAL -1 7) (SINGLE-FLOAT 0.1)) and then for the ;;; SUBTYPEP to fail (returning NIL,T instead of T,T) because ;;; the first argument can't be seen to be a subtype of any of the ;;; terms in the second argument. ;;; ;;; The old CMU CL way was: ;;; (!def-bounded-type float float nil) ;;; (!def-bounded-type real nil nil) ;;; ;;; FIXME: If this new way works for a while with no weird new ;;; problems, we can go back and rip out support for separate FLOAT ;;; and REAL flavors of NUMERIC-TYPE. The new way was added in ;;; sbcl-0.6.11.22, 2001-03-21. ;;; ;;; FIXME: It's probably necessary to do something to fix the ;;; analogous problem with INTEGER and RATIONAL types. Perhaps ;;; bounded RATIONAL types should be represented as (OR RATIO INTEGER). (defun coerce-bound (bound type inner-coerce-bound-fun) (declare (type function inner-coerce-bound-fun)) (cond ((eql bound '*) bound) ((consp bound) (destructuring-bind (inner-bound) bound (list (funcall inner-coerce-bound-fun inner-bound type)))) (t (funcall inner-coerce-bound-fun bound type)))) (defun inner-coerce-real-bound (bound type) (ecase type (rational (rationalize bound)) (float (if (floatp bound) bound ;; Coerce to the widest float format available, to ;; avoid unnecessary loss of precision: (coerce bound 'long-float))))) (defun coerced-real-bound (bound type) (coerce-bound bound type #'inner-coerce-real-bound)) (defun coerced-float-bound (bound type) (coerce-bound bound type #'coerce)) (!def-type-translator real (&optional (low '*) (high '*)) (specifier-type `(or (float ,(coerced-real-bound low 'float) ,(coerced-real-bound high 'float)) (rational ,(coerced-real-bound low 'rational) ,(coerced-real-bound high 'rational))))) (!def-type-translator float (&optional (low '*) (high '*)) (specifier-type `(or (single-float ,(coerced-float-bound low 'single-float) ,(coerced-float-bound high 'single-float)) (double-float ,(coerced-float-bound low 'double-float) ,(coerced-float-bound high 'double-float)) #!+long-float ,(error "stub: no long float support yet")))) (defmacro !define-float-format (f) `(!def-bounded-type ,f float ,f)) (!define-float-format short-float) (!define-float-format single-float) (!define-float-format double-float) (!define-float-format long-float) (defun numeric-types-intersect (type1 type2) (declare (type numeric-type type1 type2)) (let* ((class1 (numeric-type-class type1)) (class2 (numeric-type-class type2)) (complexp1 (numeric-type-complexp type1)) (complexp2 (numeric-type-complexp type2)) (format1 (numeric-type-format type1)) (format2 (numeric-type-format type2)) (low1 (numeric-type-low type1)) (high1 (numeric-type-high type1)) (low2 (numeric-type-low type2)) (high2 (numeric-type-high type2))) ;; If one is complex and the other isn't, then they are disjoint. (cond ((not (or (eq complexp1 complexp2) (null complexp1) (null complexp2))) nil) ;; If either type is a float, then the other must either be ;; specified to be a float or unspecified. Otherwise, they ;; are disjoint. ((and (eq class1 'float) (not (member class2 '(float nil)))) nil) ((and (eq class2 'float) (not (member class1 '(float nil)))) nil) ;; If the float formats are specified and different, the ;; types are disjoint. ((not (or (eq format1 format2) (null format1) (null format2))) nil) (t ;; Check the bounds. This is a bit odd because we must ;; always have the outer bound of the interval as the ;; second arg. (if (numeric-bound-test high1 high2 <= <) (or (and (numeric-bound-test low1 low2 >= >) (numeric-bound-test* low1 high2 <= <)) (and (numeric-bound-test low2 low1 >= >) (numeric-bound-test* low2 high1 <= <))) (or (and (numeric-bound-test* low2 high1 <= <) (numeric-bound-test low2 low1 >= >)) (and (numeric-bound-test high2 high1 <= <) (numeric-bound-test* high2 low1 >= >)))))))) ;;; Take the numeric bound X and convert it into something that can be ;;; used as a bound in a numeric type with the specified CLASS and ;;; FORMAT. If UP-P is true, then we round up as needed, otherwise we ;;; round down. UP-P true implies that X is a lower bound, i.e. (N) > N. ;;; ;;; This is used by NUMERIC-TYPE-INTERSECTION to mash the bound into ;;; the appropriate type number. X may only be a float when CLASS is ;;; FLOAT. ;;; ;;; ### Note: it is possible for the coercion to a float to overflow ;;; or underflow. This happens when the bound doesn't fit in the ;;; specified format. In this case, we should really return the ;;; appropriate {Most | Least}-{Positive | Negative}-XXX-Float float ;;; of desired format. But these conditions aren't currently signalled ;;; in any useful way. ;;; ;;; Also, when converting an open rational bound into a float we ;;; should probably convert it to a closed bound of the closest float ;;; in the specified format. KLUDGE: In general, open float bounds are ;;; screwed up. -- (comment from original CMU CL) (defun round-numeric-bound (x class format up-p) (if x (let ((cx (if (consp x) (car x) x))) (ecase class ((nil rational) x) (integer (if (and (consp x) (integerp cx)) (if up-p (1+ cx) (1- cx)) (if up-p (ceiling cx) (floor cx)))) (float (let ((res (if format (coerce cx format) (float cx)))) (if (consp x) (list res) res))))) nil)) ;;; Handle the case of type intersection on two numeric types. We use ;;; TYPES-EQUAL-OR-INTERSECT to throw out the case of types with no ;;; intersection. If an attribute in TYPE1 is unspecified, then we use ;;; TYPE2's attribute, which must be at least as restrictive. If the ;;; types intersect, then the only attributes that can be specified ;;; and different are the class and the bounds. ;;; ;;; When the class differs, we use the more restrictive class. The ;;; only interesting case is RATIONAL/INTEGER, since RATIONAL includes ;;; INTEGER. ;;; ;;; We make the result lower (upper) bound the maximum (minimum) of ;;; the argument lower (upper) bounds. We convert the bounds into the ;;; appropriate numeric type before maximizing. This avoids possible ;;; confusion due to mixed-type comparisons (but I think the result is ;;; the same). (!define-type-method (number :simple-intersection2) (type1 type2) (declare (type numeric-type type1 type2)) (if (numeric-types-intersect type1 type2) (let* ((class1 (numeric-type-class type1)) (class2 (numeric-type-class type2)) (class (ecase class1 ((nil) class2) ((integer float) class1) (rational (if (eq class2 'integer) 'integer 'rational)))) (format (or (numeric-type-format type1) (numeric-type-format type2)))) (make-numeric-type :class class :format format :complexp (or (numeric-type-complexp type1) (numeric-type-complexp type2)) :low (numeric-bound-max (round-numeric-bound (numeric-type-low type1) class format t) (round-numeric-bound (numeric-type-low type2) class format t) > >= nil) :high (numeric-bound-max (round-numeric-bound (numeric-type-high type1) class format nil) (round-numeric-bound (numeric-type-high type2) class format nil) < <= nil))) *empty-type*)) ;;; Given two float formats, return the one with more precision. If ;;; either one is null, return NIL. (defun float-format-max (f1 f2) (when (and f1 f2) (dolist (f *float-formats* (error "bad float format: ~S" f1)) (when (or (eq f f1) (eq f f2)) (return f))))) ;;; Return the result of an operation on TYPE1 and TYPE2 according to ;;; the rules of numeric contagion. This is always NUMBER, some float ;;; format (possibly complex) or RATIONAL. Due to rational ;;; canonicalization, there isn't much we can do here with integers or ;;; rational complex numbers. ;;; ;;; If either argument is not a NUMERIC-TYPE, then return NUMBER. This ;;; is useful mainly for allowing types that are technically numbers, ;;; but not a NUMERIC-TYPE. (defun numeric-contagion (type1 type2) (if (and (numeric-type-p type1) (numeric-type-p type2)) (let ((class1 (numeric-type-class type1)) (class2 (numeric-type-class type2)) (format1 (numeric-type-format type1)) (format2 (numeric-type-format type2)) (complexp1 (numeric-type-complexp type1)) (complexp2 (numeric-type-complexp type2))) (cond ((or (null complexp1) (null complexp2)) (specifier-type 'number)) ((eq class1 'float) (make-numeric-type :class 'float :format (ecase class2 (float (float-format-max format1 format2)) ((integer rational) format1) ((nil) ;; A double-float with any real number is a ;; double-float. #!-long-float (if (eq format1 'double-float) 'double-float nil) ;; A long-float with any real number is a ;; long-float. #!+long-float (if (eq format1 'long-float) 'long-float nil))) :complexp (if (or (eq complexp1 :complex) (eq complexp2 :complex)) :complex :real))) ((eq class2 'float) (numeric-contagion type2 type1)) ((and (eq complexp1 :real) (eq complexp2 :real)) (make-numeric-type :class (and class1 class2 'rational) :complexp :real)) (t (specifier-type 'number)))) (specifier-type 'number))) ;;;; array types (!define-type-class array) ;;; What this does depends on the setting of the ;;; *USE-IMPLEMENTATION-TYPES* switch. If true, return the specialized ;;; element type, otherwise return the original element type. (defun specialized-element-type-maybe (type) (declare (type array-type type)) (if *use-implementation-types* (array-type-specialized-element-type type) (array-type-element-type type))) (!define-type-method (array :simple-=) (type1 type2) (values (and (equal (array-type-dimensions type1) (array-type-dimensions type2)) (eq (array-type-complexp type1) (array-type-complexp type2)) (type= (specialized-element-type-maybe type1) (specialized-element-type-maybe type2))) t)) (!define-type-method (array :unparse) (type) (let ((dims (array-type-dimensions type)) (eltype (type-specifier (array-type-element-type type))) (complexp (array-type-complexp type))) (cond ((eq dims '*) (if (eq eltype '*) (if complexp 'array 'simple-array) (if complexp `(array ,eltype) `(simple-array ,eltype)))) ((= (length dims) 1) (if complexp (if (eq (car dims) '*) (case eltype (bit 'bit-vector) (base-char 'base-string) (character 'string) (* 'vector) (t `(vector ,eltype))) (case eltype (bit `(bit-vector ,(car dims))) (base-char `(base-string ,(car dims))) (character `(string ,(car dims))) (t `(vector ,eltype ,(car dims))))) (if (eq (car dims) '*) (case eltype (bit 'simple-bit-vector) (base-char 'simple-base-string) (character 'simple-string) ((t) 'simple-vector) (t `(simple-array ,eltype (*)))) (case eltype (bit `(simple-bit-vector ,(car dims))) (base-char `(simple-base-string ,(car dims))) (character `(simple-string ,(car dims))) ((t) `(simple-vector ,(car dims))) (t `(simple-array ,eltype ,dims)))))) (t (if complexp `(array ,eltype ,dims) `(simple-array ,eltype ,dims)))))) (!define-type-method (array :simple-subtypep) (type1 type2) (let ((dims1 (array-type-dimensions type1)) (dims2 (array-type-dimensions type2)) (complexp2 (array-type-complexp type2))) (cond (;; not subtypep unless dimensions are compatible (not (or (eq dims2 '*) (and (not (eq dims1 '*)) ;; (sbcl-0.6.4 has trouble figuring out that ;; DIMS1 and DIMS2 must be lists at this ;; point, and knowing that is important to ;; compiling EVERY efficiently.) (= (length (the list dims1)) (length (the list dims2))) (every (lambda (x y) (or (eq y '*) (eql x y))) (the list dims1) (the list dims2))))) (values nil t)) ;; not subtypep unless complexness is compatible ((not (or (eq complexp2 :maybe) (eq (array-type-complexp type1) complexp2))) (values nil t)) ;; Since we didn't fail any of the tests above, we win ;; if the TYPE2 element type is wild. ((eq (array-type-element-type type2) *wild-type*) (values t t)) (;; Since we didn't match any of the special cases above, we ;; can't give a good answer unless both the element types ;; have been defined. (or (unknown-type-p (array-type-element-type type1)) (unknown-type-p (array-type-element-type type2))) (values nil nil)) (;; Otherwise, the subtype relationship holds iff the ;; types are equal, and they're equal iff the specialized ;; element types are identical. t (values (type= (specialized-element-type-maybe type1) (specialized-element-type-maybe type2)) t))))) (!define-superclasses array ((string string) (vector vector) (array)) !cold-init-forms) (defun array-types-intersect (type1 type2) (declare (type array-type type1 type2)) (let ((dims1 (array-type-dimensions type1)) (dims2 (array-type-dimensions type2)) (complexp1 (array-type-complexp type1)) (complexp2 (array-type-complexp type2))) ;; See whether dimensions are compatible. (cond ((not (or (eq dims1 '*) (eq dims2 '*) (and (= (length dims1) (length dims2)) (every (lambda (x y) (or (eq x '*) (eq y '*) (= x y))) dims1 dims2)))) (values nil t)) ;; See whether complexpness is compatible. ((not (or (eq complexp1 :maybe) (eq complexp2 :maybe) (eq complexp1 complexp2))) (values nil t)) ;; If either element type is wild, then they intersect. ;; Otherwise, the types must be identical. ((or (eq (array-type-element-type type1) *wild-type*) (eq (array-type-element-type type2) *wild-type*) (type= (specialized-element-type-maybe type1) (specialized-element-type-maybe type2))) (values t t)) (t (values nil t))))) (!define-type-method (array :simple-intersection2) (type1 type2) (declare (type array-type type1 type2)) (if (array-types-intersect type1 type2) (let ((dims1 (array-type-dimensions type1)) (dims2 (array-type-dimensions type2)) (complexp1 (array-type-complexp type1)) (complexp2 (array-type-complexp type2)) (eltype1 (array-type-element-type type1)) (eltype2 (array-type-element-type type2))) (specialize-array-type (make-array-type :dimensions (cond ((eq dims1 '*) dims2) ((eq dims2 '*) dims1) (t (mapcar (lambda (x y) (if (eq x '*) y x)) dims1 dims2))) :complexp (if (eq complexp1 :maybe) complexp2 complexp1) :element-type (if (eq eltype1 *wild-type*) eltype2 eltype1)))) *empty-type*)) ;;; Check a supplied dimension list to determine whether it is legal, ;;; and return it in canonical form (as either '* or a list). (defun canonical-array-dimensions (dims) (typecase dims ((member *) dims) (integer (when (minusp dims) (error "Arrays can't have a negative number of dimensions: ~S" dims)) (when (>= dims sb!xc:array-rank-limit) (error "array type with too many dimensions: ~S" dims)) (make-list dims :initial-element '*)) (list (when (>= (length dims) sb!xc:array-rank-limit) (error "array type with too many dimensions: ~S" dims)) (dolist (dim dims) (unless (eq dim '*) (unless (and (integerp dim) (>= dim 0) (< dim sb!xc:array-dimension-limit)) (error "bad dimension in array type: ~S" dim)))) dims) (t (error "Array dimensions is not a list, integer or *:~% ~S" dims)))) ;;;; MEMBER types (!define-type-class member) (!define-type-method (member :unparse) (type) (let ((members (member-type-members type))) (if (equal members '(nil)) 'null `(member ,@members)))) (!define-type-method (member :simple-subtypep) (type1 type2) (values (subsetp (member-type-members type1) (member-type-members type2)) t)) (!define-type-method (member :complex-subtypep-arg1) (type1 type2) (every/type (swapped-args-fun #'ctypep) type2 (member-type-members type1))) ;;; We punt if the odd type is enumerable and intersects with the ;;; MEMBER type. If not enumerable, then it is definitely not a ;;; subtype of the MEMBER type. (!define-type-method (member :complex-subtypep-arg2) (type1 type2) (cond ((not (type-enumerable type1)) (values nil t)) ((types-equal-or-intersect type1 type2) (invoke-complex-subtypep-arg1-method type1 type2)) (t (values nil t)))) (!define-type-method (member :simple-intersection2) (type1 type2) (let ((mem1 (member-type-members type1)) (mem2 (member-type-members type2))) (cond ((subsetp mem1 mem2) type1) ((subsetp mem2 mem1) type2) (t (let ((res (intersection mem1 mem2))) (if res (make-member-type :members res) *empty-type*)))))) (!define-type-method (member :complex-intersection2) (type1 type2) (block punt (collect ((members)) (let ((mem2 (member-type-members type2))) (dolist (member mem2) (multiple-value-bind (val win) (ctypep member type1) (unless win (return-from punt nil)) (when val (members member)))) (cond ((subsetp mem2 (members)) type2) ((null (members)) *empty-type*) (t (make-member-type :members (members)))))))) ;;; We don't need a :COMPLEX-UNION2, since the only interesting case is ;;; a union type, and the member/union interaction is handled by the ;;; union type method. (!define-type-method (member :simple-union2) (type1 type2) (let ((mem1 (member-type-members type1)) (mem2 (member-type-members type2))) (cond ((subsetp mem1 mem2) type2) ((subsetp mem2 mem1) type1) (t (make-member-type :members (union mem1 mem2)))))) (!define-type-method (member :simple-=) (type1 type2) (let ((mem1 (member-type-members type1)) (mem2 (member-type-members type2))) (values (and (subsetp mem1 mem2) (subsetp mem2 mem1)) t))) (!define-type-method (member :complex-=) (type1 type2) (if (type-enumerable type1) (multiple-value-bind (val win) (csubtypep type2 type1) (if (or val (not win)) (values nil nil) (values nil t))) (values nil t))) (!def-type-translator member (&rest members) (if members (make-member-type :members (remove-duplicates members)) *empty-type*)) ;;;; intersection types ;;;; ;;;; Until version 0.6.10.6, SBCL followed the original CMU CL approach ;;;; of punting on all AND types, not just the unreasonably complicated ;;;; ones. The change was motivated by trying to get the KEYWORD type ;;;; to behave sensibly: ;;;; ;; reasonable definition ;;;; (DEFTYPE KEYWORD () '(AND SYMBOL (SATISFIES KEYWORDP))) ;;;; ;; reasonable behavior ;;;; (AVER (SUBTYPEP 'KEYWORD 'SYMBOL)) ;;;; Without understanding a little about the semantics of AND, we'd ;;;; get (SUBTYPEP 'KEYWORD 'SYMBOL)=>NIL,NIL and, for entirely ;;;; parallel reasons, (SUBTYPEP 'RATIO 'NUMBER)=>NIL,NIL. That's ;;;; not so good..) ;;;; ;;;; We still follow the example of CMU CL to some extent, by punting ;;;; (to the opaque HAIRY-TYPE) on sufficiently complicated types ;;;; involving AND. (!define-type-class intersection) ;;; A few intersection types have special names. The others just get ;;; mechanically unparsed. (!define-type-method (intersection :unparse) (type) (declare (type ctype type)) (or (find type '(ratio bignum keyword) :key #'specifier-type :test #'type=) `(and ,@(mapcar #'type-specifier (intersection-type-types type))))) ;;; shared machinery for type equality: true if every type in the set ;;; TYPES1 matches a type in the set TYPES2 and vice versa (defun type=-set (types1 types2) (flet (;; true if every type in the set X matches a type in the set Y (type<=-set (x y) (declare (type list x y)) (every (lambda (xelement) (position xelement y :test #'type=)) x))) (values (and (type<=-set types1 types2) (type<=-set types2 types1)) t))) ;;; Two intersection types are equal if their subtypes are equal sets. ;;; ;;; FIXME: Might it be better to use ;;; (AND (SUBTYPEP X Y) (SUBTYPEP Y X)) ;;; instead, since SUBTYPEP is the usual relationship that we care ;;; most about, so it would be good to leverage any ingenuity there ;;; in this more obscure method? (!define-type-method (intersection :simple-=) (type1 type2) (type=-set (intersection-type-types type1) (intersection-type-types type2))) (defun %intersection-complex-subtypep-arg1 (type1 type2) (any/type (swapped-args-fun #'csubtypep) type2 (intersection-type-types type1))) (!define-type-method (intersection :simple-subtypep) (type1 type2) (every/type #'%intersection-complex-subtypep-arg1 type1 (intersection-type-types type2))) (!define-type-method (intersection :complex-subtypep-arg1) (type1 type2) (%intersection-complex-subtypep-arg1 type1 type2)) (!define-type-method (intersection :complex-subtypep-arg2) (type1 type2) (every/type #'csubtypep type1 (intersection-type-types type2))) (!def-type-translator and (&whole whole &rest type-specifiers) (apply #'type-intersection (mapcar #'specifier-type type-specifiers))) ;;;; union types (!define-type-class union) ;;; The LIST type has a special name. Other union types just get ;;; mechanically unparsed. (!define-type-method (union :unparse) (type) (declare (type ctype type)) (if (type= type (specifier-type 'list)) 'list `(or ,@(mapcar #'type-specifier (union-type-types type))))) ;;; Two union types are equal if their subtypes are equal sets. (!define-type-method (union :simple-=) (type1 type2) (type=-set (union-type-types type1) (union-type-types type2))) ;;; Similarly, a union type is a subtype of another if and only if ;;; every element of TYPE1 is a subtype of TYPE2. (!define-type-method (union :simple-subtypep) (type1 type2) (every/type (swapped-args-fun #'union-complex-subtypep-arg2) type2 (union-type-types type1))) (defun union-complex-subtypep-arg1 (type1 type2) (every/type (swapped-args-fun #'csubtypep) type2 (union-type-types type1))) (!define-type-method (union :complex-subtypep-arg1) (type1 type2) (union-complex-subtypep-arg1 type1 type2)) (defun union-complex-subtypep-arg2 (type1 type2) (multiple-value-bind (sub-value sub-certain?) (any/type #'csubtypep type1 (union-type-types type2)) (if sub-certain? (values sub-value sub-certain?) ;; The ANY/TYPE expression above is a sufficient condition for ;; subsetness, but not a necessary one, so we might get a more ;; certain answer by this CALL-NEXT-METHOD-ish step when the ;; ANY/TYPE expression is uncertain. (invoke-complex-subtypep-arg1-method type1 type2)))) (!define-type-method (union :complex-subtypep-arg2) (type1 type2) (union-complex-subtypep-arg2 type1 type2)) (!define-type-method (union :simple-intersection2 :complex-intersection2) (type1 type2) ;; The CSUBTYPEP clauses here let us simplify e.g. ;; (TYPE-INTERSECTION2 (SPECIFIER-TYPE 'LIST) ;; (SPECIFIER-TYPE '(OR LIST VECTOR))) ;; (where LIST is (OR CONS NULL)). ;; ;; The tests are more or less (CSUBTYPEP TYPE1 TYPE2) and vice ;; versa, but it's important that we pre-expand them into ;; specialized operations on individual elements of ;; UNION-TYPE-TYPES, instead of using the ordinary call to ;; CSUBTYPEP, in order to avoid possibly invoking any methods which ;; might in turn invoke (TYPE-INTERSECTION2 TYPE1 TYPE2) and thus ;; cause infinite recursion. (cond ((union-complex-subtypep-arg2 type1 type2) type1) ((union-complex-subtypep-arg1 type2 type1) type2) (t ;; KLUDGE: This code accumulates a sequence of TYPE-UNION2 ;; operations in a particular order, and gives up if any of ;; the sub-unions turn out not to be simple. In other cases ;; ca. sbcl-0.6.11.15, that approach to taking a union was a ;; bad idea, since it can overlook simplifications which ;; might occur if the terms were accumulated in a different ;; order. It's possible that that will be a problem here too. ;; However, I can't think of a good example to demonstrate ;; it, and without an example to demonstrate it I can't write ;; test cases, and without test cases I don't want to ;; complicate the code to address what's still a hypothetical ;; problem. So I punted. -- WHN 2001-03-20 (let ((accumulator *empty-type*)) (dolist (t2 (union-type-types type2) accumulator) (setf accumulator (type-union2 accumulator (type-intersection type1 t2))) ;; When our result isn't simple any more (because ;; TYPE-UNION2 was unable to give us a simple result) (unless accumulator (return nil))))))) (!def-type-translator or (&rest type-specifiers) (apply #'type-union (mapcar #'specifier-type type-specifiers))) ;;;; CONS types (!define-type-class cons) (!def-type-translator cons (&optional (car-type-spec '*) (cdr-type-spec '*)) (make-cons-type (specifier-type car-type-spec) (specifier-type cdr-type-spec))) (!define-type-method (cons :unparse) (type) (let ((car-eltype (type-specifier (cons-type-car-type type))) (cdr-eltype (type-specifier (cons-type-cdr-type type)))) (if (and (member car-eltype '(t *)) (member cdr-eltype '(t *))) 'cons `(cons ,car-eltype ,cdr-eltype)))) (!define-type-method (cons :simple-=) (type1 type2) (declare (type cons-type type1 type2)) (and (type= (cons-type-car-type type1) (cons-type-car-type type2)) (type= (cons-type-cdr-type type1) (cons-type-cdr-type type2)))) (!define-type-method (cons :simple-subtypep) (type1 type2) (declare (type cons-type type1 type2)) (multiple-value-bind (val-car win-car) (csubtypep (cons-type-car-type type1) (cons-type-car-type type2)) (multiple-value-bind (val-cdr win-cdr) (csubtypep (cons-type-cdr-type type1) (cons-type-cdr-type type2)) (if (and val-car val-cdr) (values t (and win-car win-cdr)) (values nil (or win-car win-cdr)))))) ;;; Give up if a precise type is not possible, to avoid returning ;;; overly general types. (!define-type-method (cons :simple-union2) (type1 type2) (declare (type cons-type type1 type2)) (let ((car-type1 (cons-type-car-type type1)) (car-type2 (cons-type-car-type type2)) (cdr-type1 (cons-type-cdr-type type1)) (cdr-type2 (cons-type-cdr-type type2))) (cond ((type= car-type1 car-type2) (make-cons-type car-type1 (type-union cdr-type1 cdr-type2))) ((type= cdr-type1 cdr-type2) (make-cons-type (type-union cdr-type1 cdr-type2) cdr-type1))))) (!define-type-method (cons :simple-intersection2) (type1 type2) (declare (type cons-type type1 type2)) (let (car-int2 cdr-int2) (and (setf car-int2 (type-intersection2 (cons-type-car-type type1) (cons-type-car-type type2))) (setf cdr-int2 (type-intersection2 (cons-type-cdr-type type1) (cons-type-cdr-type type2))) (make-cons-type car-int2 cdr-int2)))) ;;; Return the type that describes all objects that are in X but not ;;; in Y. If we can't determine this type, then return NIL. ;;; ;;; For now, we only are clever dealing with union and member types. ;;; If either type is not a union type, then we pretend that it is a ;;; union of just one type. What we do is remove from X all the types ;;; that are a subtype any type in Y. If any type in X intersects with ;;; a type in Y but is not a subtype, then we give up. ;;; ;;; We must also special-case any member type that appears in the ;;; union. We remove from X's members all objects that are TYPEP to Y. ;;; If Y has any members, we must be careful that none of those ;;; members are CTYPEP to any of Y's non-member types. We give up in ;;; this case, since to compute that difference we would have to break ;;; the type from X into some collection of types that represents the ;;; type without that particular element. This seems too hairy to be ;;; worthwhile, given its low utility. (defun type-difference (x y) (let ((x-types (if (union-type-p x) (union-type-types x) (list x))) (y-types (if (union-type-p y) (union-type-types y) (list y)))) (collect ((res)) (dolist (x-type x-types) (if (member-type-p x-type) (collect ((members)) (dolist (mem (member-type-members x-type)) (multiple-value-bind (val win) (ctypep mem y) (unless win (return-from type-difference nil)) (unless val (members mem)))) (when (members) (res (make-member-type :members (members))))) (dolist (y-type y-types (res x-type)) (multiple-value-bind (val win) (csubtypep x-type y-type) (unless win (return-from type-difference nil)) (when val (return)) (when (types-equal-or-intersect x-type y-type) (return-from type-difference nil)))))) (let ((y-mem (find-if #'member-type-p y-types))) (when y-mem (let ((members (member-type-members y-mem))) (dolist (x-type x-types) (unless (member-type-p x-type) (dolist (member members) (multiple-value-bind (val win) (ctypep member x-type) (when (or (not win) val) (return-from type-difference nil))))))))) (apply #'type-union (res))))) (!def-type-translator array (&optional (element-type '*) (dimensions '*)) (specialize-array-type (make-array-type :dimensions (canonical-array-dimensions dimensions) :element-type (specifier-type element-type)))) (!def-type-translator simple-array (&optional (element-type '*) (dimensions '*)) (specialize-array-type (make-array-type :dimensions (canonical-array-dimensions dimensions) :element-type (specifier-type element-type) :complexp nil))) ;;;; utilities shared between cross-compiler and target system ;;; Does the type derived from compilation of an actual function ;;; definition satisfy declarations of a function's type? (defun defined-ftype-matches-declared-ftype-p (defined-ftype declared-ftype) (declare (type ctype defined-ftype declared-ftype)) (flet ((is-built-in-class-function-p (ctype) (and (built-in-class-p ctype) (eq (built-in-class-%name ctype) 'function)))) (cond (;; DECLARED-FTYPE could certainly be #; ;; that's what happens when we (DECLAIM (FTYPE FUNCTION FOO)). (is-built-in-class-function-p declared-ftype) ;; In that case, any definition satisfies the declaration. t) (;; It's not clear whether or how DEFINED-FTYPE might be ;; #, but it's not obviously ;; invalid, so let's handle that case too, just in case. (is-built-in-class-function-p defined-ftype) ;; No matter what DECLARED-FTYPE might be, we can't prove ;; that an object of type FUNCTION doesn't satisfy it, so ;; we return success no matter what. t) (;; Otherwise both of them must be FUN-TYPE objects. t ;; FIXME: For now we only check compatibility of the return ;; type, not argument types, and we don't even check the ;; return type very precisely (as per bug 94a). It would be ;; good to do a better job. Perhaps to check the ;; compatibility of the arguments, we should (1) redo ;; VALUES-TYPES-EQUAL-OR-INTERSECT as ;; ARGS-TYPES-EQUAL-OR-INTERSECT, and then (2) apply it to ;; the ARGS-TYPE slices of the FUN-TYPEs. (ARGS-TYPE ;; is a base class both of VALUES-TYPE and of FUN-TYPE.) (values-types-equal-or-intersect (fun-type-returns defined-ftype) (fun-type-returns declared-ftype)))))) ;;; This messy case of CTYPE for NUMBER is shared between the ;;; cross-compiler and the target system. (defun ctype-of-number (x) (let ((num (if (complexp x) (realpart x) x))) (multiple-value-bind (complexp low high) (if (complexp x) (let ((imag (imagpart x))) (values :complex (min num imag) (max num imag))) (values :real num num)) (make-numeric-type :class (etypecase num (integer 'integer) (rational 'rational) (float 'float)) :format (and (floatp num) (float-format-name num)) :complexp complexp :low low :high high)))) (locally ;; Why SAFETY 0? To suppress the is-it-the-right-structure-type ;; checking for declarations in structure accessors. Otherwise we ;; can get caught in a chicken-and-egg bootstrapping problem, whose ;; symptom on x86 OpenBSD sbcl-0.pre7.37.flaky5.22 is an illegal ;; instruction trap. I haven't tracked it down, but I'm guessing it ;; has to do with setting LAYOUTs when the LAYOUT hasn't been set ;; yet. -- WHN (declare (optimize (safety 0))) (!defun-from-collected-cold-init-forms !late-type-cold-init)) (/show0 "late-type.lisp end of file")