(FLOAT 1 DOUBLE-FLOAT-EPSILON)
don't give the right behavior.
-46:
- type safety errors reported by Peter Van Eynde July 25, 2000:
- k: READ-BYTE is supposed to signal TYPE-ERROR when its argument is
- not a binary input stream, but instead cheerfully reads from
- string-input streams, e.g. (MAKE-STRING-INPUT-STREAM "abc").
- [ Bug was reported as "from character streams", but in 0.8.3.10 we
- get correct behaviour from (WITH-OPEN-FILE (i "/dev/zero") (READ-BYTE i)) ]
-
-
60:
The debugger LIST-LOCATIONS command doesn't work properly.
(How should it work properly?)
GC, so that thereafter memory usage can never be reduced below that
level.
+ (As of 0.8.7.3 it's likely that the latter half of this bug is fixed.
+ The interaction between gencgc and the variables used by
+ save-lisp-and-die is still nonoptimal, though, so no respite from
+ big core files yet)
+
98:
In sbcl-0.6.11.41 (and in all earlier SBCL, and in CMU
CL), out-of-line structure slot setters are horribly inefficient
time trying to GC afterwards. Surely there's some more economical
way to implement (ROOM T).
+ Daniel Barlow doesn't know what fixed this, but observes that it
+ doesn't seem to be the case in 0.8.7.3 any more. Instead, (ROOM T)
+ in a fresh SBCL causes
+
+ debugger invoked on a SB-INT:BUG in thread 5911:
+ failed AVER: "(SAP= CURRENT END)"
+
+ unless a GC has happened beforehand.
+
117:
When the compiler inline expands functions, it may be that different
kinds of return values are generated from different code branches.
Raymond Toy comments that this is tricky on the X86 since its FPU
uses 80-bit precision internally.
-120b:
- Even in sbcl-0.pre7.x, which is supposed to be free of the old
- non-ANSI behavior of treating the function return type inferred
- from the current function definition as a declaration of the
- return type from any function of that name, the return type of NIL
- is attached to FOO in 120a above, and used to optimize code which
- calls FOO.
+ Bruno Haible comments:
+ The values are those that are expected for an IEEE double-float
+ arithmetic. The problem appears to be that the rounding is not
+ IEEE on x86 compliant: namely, values are first rounded to 64
+ bits mantissa precision, then only to 53 bits mantissa
+ precision. This gives different results than rounding to 53 bits
+ mantissa precision in a single step.
+
+ The quick "fix", to permanently change the FPU control word from
+ 0x037f to 0x027f, will give problems with the fdlibm code that is
+ used for computing transcendental functions like sinh() etc.
+ so maybe we need to change the FPU control word to that for Lisp
+ code, and adjust it to the safe 0x037f for calls to C?
124:
As of version 0.pre7.14, SBCL's implementation of MACROLET makes
* '``(FOO ,@',@S)
``(FOO SB-IMPL::BACKQ-COMMA-AT S)
- b.
- * (write '`(, .ala.) :readably t :pretty t)
- `(,.ALA.)
-
- (note the space between the comma and the point)
+ c. (reported by Paul F. Dietz)
+ * '`(lambda ,x)
+ `(LAMBDA (SB-IMPL::BACKQ-COMMA X))
143:
(reported by Jesse Bouwman 2001-10-24 through the unfortunately
The careful type of X is {2k} :-(. Is it really important to be
able to work with unions of many intervals?
-190: "PPC/Linux pipe? buffer? bug"
- In sbcl-0.7.6, the run-program.test.sh test script sometimes hangs
- on the PPC/Linux platform, waiting for a zombie env process. This
- is a classic symptom of buffer filling and deadlock, but it seems
- only sporadically reproducible.
-
191: "Miscellaneous PCL deficiencies"
(reported by Alexey Dejneka sbcl-devel 2002-08-04)
a. DEFCLASS does not inform the compiler about generated
classes). This means that at present erroneous attempts to use
WITH-SLOTS and the like on classes with metaclass STRUCTURE-CLASS
won't get the corresponding STYLE-WARNING.
- c. the examples in CLHS 7.6.5.1 (regarding generic function lambda
- lists and &KEY arguments) do not signal errors when they should.
+ c. (fixed in 0.8.4.23)
201: "Incautious type inference from compound types"
a. (reported by APD sbcl-devel 2002-09-17)
all of the arguments are circular is probably desireable).
213: "Sequence functions and type checking"
- a. MAKE-SEQUENCE, COERCE, MERGE and CONCATENATE cannot deal with
- various complicated, though recognizeable, CONS types [e.g.
- (CONS * (CONS * NULL))
- which according to ANSI should be recognized] (and, in SAFETY 3
- code, should return a list of LENGTH 2 or signal an error)
b. MAP, when given a type argument that is SUBTYPEP LIST, does not
check that it will return a sequence of the given type. Fixing
it along the same lines as the others (cf. work done around
(INTEGERP (CAR (MAKE-SEQUENCE '(CONS INTEGER *) 2)))
can erroneously return T.
-214:
- SBCL 0.6.12.43 fails to compile
-
- (locally
- (declare (optimize (inhibit-warnings 0) (compilation-speed 2)))
- (flet ((foo (&key (x :vx x-p)) (list x x-p)))
- (foo 1 2)))
-
- or a more simple example:
-
- (locally
- (declare (optimize (inhibit-warnings 0) (compilation-speed 2)))
- (lambda (x) (declare (fixnum x)) (if (< x 0) 0 (1- x))))
-
215: ":TEST-NOT handling by functions"
a. FIND and POSITION currently signal errors when given non-NIL for
both their :TEST and (deprecated) :TEST-NOT arguments, but by
; The variable Y is defined but never used.
245: bugs in disassembler
- a. On X86 an immediate operand for IMUL is printed incorrectly.
b. On X86 operand size prefix is not recognized.
-248: "reporting errors in type specifier syntax"
- (TYPEP 1 '(SYMBOL NIL)) says something about "unknown type
- specifier".
-
251:
(defun foo (&key (a :x))
(declare (fixnum a))
b. The same for CSUBTYPEP.
-261:
- * (let () (list (the (values &optional fixnum) (eval '(values)))))
- debugger invoked on condition of type TYPE-ERROR:
- The value NIL is not of type FIXNUM.
-
262: "yet another bug in inline expansion of local functions"
Compiler fails on
Urgh... It's time to write IR1-copier.
-265:
- SB-EXT:RUN-PROGRAM is currently non-functional on Linux/PPC;
- attempting to use it leads to segmentation violations. This is
- probably because of a bogus implementation of
- os_restore_fp_control().
-
266:
David Lichteblau provided (sbcl-devel 2003-06-01) a patch to fix
behaviour of streams with element-type (SIGNED-BYTE 8). The patch
The issue seems to be that construction of a discriminating function
calls COMPUTE-EFFECTIVE-METHOD with methods that are not all applicable.
-282: "type checking in full calls"
- In current (0.8.3.6) implementation a CAST in a full call argument
- is not checked; but the continuation between the CAST and the
- combination has the "checked" type and CAST performs unsafe
- coercion; this may lead to errors: if FOO is declared to take a
- FIXNUM, this code will produce garbage on a machine with 30-bit
- fixnums:
-
- (foo (aref (the (array (unsigned-byte 32)) x)))
-
283: Thread safety: libc functions
There are places that we call unsafe-for-threading libc functions
that we should find alternatives for, or put locks around. Known or
this problem.
288: fundamental cross-compilation issues (from old UGLINESS file)
- 288a: Using host floating point numbers to represent target
- floating point numbers, or host characters to represent
- target characters, is theoretically shaky. (The characters
- are OK as long as the characters are in the ANSI-guaranteed
- character set, though, so they aren't a real problem as
- long as the sources don't need anything but that.)
- 288b: The compiler still makes assumptions about cross-compilation-host
- implementation of ANSI CL:
- 288b1: Simple bit vectors are distinct from simple vectors (in
- DEFINE-STORAGE-BASE and elsewhere). (Actually, I'm not *sure*
- that things would really break if this weren't so, but I
- strongly suspect that they would.)
- 288b2: SINGLE-FLOAT is distinct from DOUBLE-FLOAT. (This is
- in a sense just one aspect of bug 288a.)
+ Using host floating point numbers to represent target floating point
+ numbers, or host characters to represent target characters, is
+ theoretically shaky. (The characters are OK as long as the characters
+ are in the ANSI-guaranteed character set, though, so they aren't a
+ real problem as long as the sources don't need anything but that;
+ the floats are a real problem.)
289: "type checking and source-transforms"
a.
the control word; however, this clobbers any change the user might
have made.
-291: "bugs in deletion of embedded functions"
-
- Python fails to compile (simplified version of the problem reported
- by Nikodemus Siivola)
-
- (defstruct (line)
- (%chars ""))
-
- (defun update-window-imag (line)
- (tagbody
- TOP
- (if (null line)
- (go DONE)
- (go TOP))
- DONE
- (unless (eq current the-sentinel)
- (let* ((cc (car current))
- (old-line (dis-line-line cc)))
- (if (eq old-line line)
- (do ((chars (line-%chars line) nil)) ; <LET>
- (())
- (let* ()
- (multiple-value-call
- #'(lambda (&optional g2740 g2741 &rest g2742)
- (declare (ignore g2742))
- (catch 'foo ; <CLEANUP>
- (values (setq string g2740) (setq underhang g2741))))
- (foo)))
- (setf (dis-line-old-chars cc) chars)))))))
-
- Compiler deletes unreachable BIND node of <LET>, but its body,
- including reference to the variable CHARS, remains reachable through
- NLX from <CLEANUP>.
+296:
+ (reported by Adam Warner, sbcl-devel 2003-09-23)
+
+ The --load toplevel argument does not perform any sanitization of its
+ argument. As a result, files with Lisp pathname pattern characters
+ (#\* or #\?, for instance) or quotation marks can cause the system
+ to perform arbitrary behaviour.
+
+297:
+ LOOP with non-constant arithmetic step clauses suffers from overzealous
+ type constraint: code of the form
+ (loop for d of-type double-float from 0d0 to 10d0 by x collect d)
+ compiles to a type restriction on X of (AND DOUBLE-FLOAT (REAL
+ (0))). However, an integral value of X should be legal, because
+ successive adds of integers to double-floats produces double-floats,
+ so none of the type restrictions in the code is violated.
+
+300: (reported by Peter Graves) Function PEEK-CHAR checks PEEK-TYPE
+ argument type only after having read a character. This is caused
+ with EXPLICIT-CHECK attribute in DEFKNOWN. The similar problem
+ exists with =, /=, <, >, <=, >=. They were fixed, but it is probably
+ less error prone to have EXPLICIT-CHECK be a local declaration,
+ being put into the definition, instead of an attribute being kept in
+ a separate file; maybe also put it into SB-EXT?
+
+301: ARRAY-SIMPLE-=-TYPE-METHOD breaks on corner cases which can arise
+ in NOTE-ASSUMED-TYPES
+ In sbcl-0.8.7.32, compiling the file
+ (defun foo (x y)
+ (declare (type integer x))
+ (declare (type (vector (or hash-table bit)) y))
+ (bletch 2 y))
+ (defun bar (x y)
+ (declare (type integer x))
+ (declare (type (simple-array base (2)) y))
+ (bletch 1 y))
+ gives the error
+ failed AVER: "(NOT (AND (NOT EQUALP) CERTAINP))"
+
+302: Undefined type messes up DATA-VECTOR-REF expansion.
+ Compiling this file
+ (defun dis (s ei x y)
+ (declare (type (simple-array function (2)) s) (type ei ei))
+ (funcall (aref s ei) x y))
+ on sbcl-0.8.7.36/X86/Linux causes a BUG to be signalled:
+ full call to SB-KERNEL:DATA-VECTOR-REF
+
+303: "nonlinear LVARs" (aka MISC.293)
+ (defun buu (x)
+ (multiple-value-call #'list
+ (block foo
+ (multiple-value-prog1
+ (eval '(values :a :b :c))
+ (catch 'bar
+ (if (> x 0)
+ (return-from foo
+ (eval `(if (> ,x 1)
+ 1
+ (throw 'bar (values 3 4)))))))))))
+
+ (BUU 1) returns garbage.
+
+ The problem is that both EVALs sequentially write to the same LVAR.
+
+305:
+ (Reported by Dave Roberts.)
+ Local INLINE/NOTINLINE declaration removes local FTYPE declaration:
+
+ (defun quux (x)
+ (declare (ftype (function () (integer 0 10)) fee)
+ (inline fee))
+ (1+ (fee)))
+
+ uses generic arithmetic with INLINE and fixnum without.
+
+306: "Imprecise unions of array types"
+ a.(defun foo (x)
+ (declare (optimize speed)
+ (type (or (array cons) (array vector)) x))
+ (elt (aref x 0) 0))
+ (foo #((0))) => TYPE-ERROR
+
+ relatedly,
+
+ b.(subtypep
+ 'array
+ `(or
+ ,@(loop for x across sb-vm:*specialized-array-element-type-properties*
+ collect `(array ,(sb-vm:saetp-specifier x)))))
+ => NIL, T (when it should be T, T)
+
+308: "Characters without names"
+ (reported by Bruno Haible sbcl-devel "character names are missing"
+ 2004-04-19)
+ (graphic-char-p (code-char 255))
+ => NIL
+ (char-name (code-char 255))
+ => NIL
+
+ SBCL is unsure of what to do about characters with codes in the
+ range 128-255. Currently they are treated as non-graphic, but don't
+ have names, which is not compliant with the standard. Various fixes
+ are possible, such as
+ * giving them names such as NON-ASCII-128;
+ * reducing CHAR-CODE-LIMIT to 127 (almost certainly unpopular);
+ * making the characters graphic (makes a certain amount of sense);
+ * biting the bullet and implementing Unicode (probably quite hard).
+
+309: "Dubious values for implementation limits"
+ (reported by Bruno Haible sbcl-devel "Incorrect value of
+ multiple-values-limit" 2004-04-19)
+ (values-list (make-list 1000000)), on x86/linux, signals a stack
+ exhaustion condition, despite MULTIPLE-VALUES-LIMIT being
+ significantly larger than 1000000. There are probably similar
+ dubious values for CALL-ARGUMENTS-LIMIT (see cmucl-help/cmucl-imp
+ around the same time regarding a call to LIST on sparc with 1000
+ arguments) and other implementation limit constants.
+
+311: "Tokeniser not thread-safe"
+ (see also Robert Marlow sbcl-help "Multi threaded read chucking a
+ spak" 2004-04-19)
+ The tokenizer's use of *read-buffer* and *read-buffer-length* causes
+ spurious errors should two threads attempt to tokenise at the same
+ time.
+
+312:
+ (reported by Jon Dyte)
+ SBCL issues a warning "Duplicate definition of FOO" compiling
+
+ (declaim (inline foo))
+ (defun foo (x)
+ (1+ x))
+ (defun bar (y)
+ (list (foo y) (if (> y 1) (funcall (if (> y 0) #'foo #'identity) y))))
+
+ (probably related to the bug 280.)
+
+314: "LOOP :INITIALLY clauses and scope of initializers"
+ reported by Bruno Haible sbcl-devel "various SBCL bugs" from CLISP
+ test suite, originally by Thomas F. Burdick.
+ ;; <http://www.lisp.org/HyperSpec/Body/sec_6-1-7-2.html>
+ ;; According to the HyperSpec 6.1.2.1.4, in for-as-equals-then, var is
+ ;; initialized to the result of evaluating form1. 6.1.7.2 says that
+ ;; initially clauses are evaluated in the loop prologue, which precedes all
+ ;; loop code except for the initial settings provided by with, for, or as.
+ (loop :for x = 0 :then (1+ x)
+ :for y = (1+ x) :then (ash y 1)
+ :for z :across #(1 3 9 27 81 243)
+ :for w = (+ x y z)
+ :initially (assert (zerop x)) :initially (assert (= 2 w))
+ :until (>= w 100) :collect w)
+ Expected: (2 6 15 38)
+ Got: ERROR
+
+315: "no bounds check for access to displaced array"
+ reported by Bruno Haible sbcl-devel "various SBCL bugs" from CLISP
+ test suite.
+ (locally (declare (optimize (safety 3) (speed 0)))
+ (let* ((x (make-array 10 :fill-pointer 4 :element-type 'character
+ :initial-element #\space :adjustable t))
+ (y (make-array 10 :fill-pointer 4 :element-type 'character
+ :displaced-to x)))
+ (adjust-array x '(5))
+ (char y 5)))
+
+ SBCL 0.8.10 elides the bounds check somewhere along the line, and
+ returns #\Nul (where an error would be much preferable, since a test
+ of that form but with (setf (char y 5) #\Space) potentially corrupts
+ the heap and certainly confuses the world if that string is used by
+ C code.
+
+317: "FORMAT of floating point numbers"
+ reported by Bruno Haible sbcl-devel "various SBCL bugs" from CLISP
+ test suite.
+ (format nil "~1F" 10) => "0." ; "10." expected
+ (format nil "~0F" 10) => "0." ; "10." expected
+ (format nil "~2F" 1234567.1) => "1000000." ; "1234567." expected
+ it would be nice if whatever fixed this also untangled the two
+ competing implementations of floating point printing (Steele and
+ White, and Burger and Dybvig) present in src/code/print.lisp
+
+318: "stack overflow in compiler warning with redefined class"
+ reported by Bruno Haible sbcl-devel "various SBCL bugs" from CLISP
+ test suite.
+ (setq *print-pretty* nil)
+ (defstruct foo a)
+ (setf (find-class 'foo) nil)
+ (defstruct foo slot-1)
+ gives
+ ...#<SB-KERNEL:STRUCTURE-CLASSOID #<SB-KERNEL:STRUCTURE-CLASSOID #<SB-KERNEL:STRUCTURE-CLASSOID #<SB-KERNEL:STRUCTUREControl stack guard page temporarily disabled: proceed with caution
+ (it's not really clear what it should give: is (SETF FIND-CLASS)
+ meant to be enough to delete structure classes from the system?
+ Giving a stack overflow is definitely suboptimal, though.)
+
+319: "backquote with comma inside array"
+ reported by Bruno Haible sbcl-devel "various SBCL bugs" from CLISP
+ test suite.
+ (read-from-string "`#1A(1 2 ,(+ 2 2) 4)")
+ gives
+ #(1 2 ((SB-IMPL::|,|) + 2 2) 4)
+ which probably isn't intentional.
+
+321: "DEFINE-METHOD-COMBINATION lambda list parsing"
+ reported by Bruno Haible sbcl-devel "various SBCL bugs" from CLISP
+ test suite.
+ (define-method-combination w-args ()
+ ((method-list *))
+ (:arguments arg1 arg2 &aux (extra :extra))
+ `(progn ,@(mapcar (lambda (method) `(call-method ,method)) method-list)))
+ gives a (caught) compile-time error, which can be exposed by
+ (defgeneric mc-test-w-args (p1 p2 s)
+ (:method-combination w-args)
+ (:method ((p1 number) (p2 t) s)
+ (vector-push-extend (list 'number p1 p2) s))
+ (:method ((p1 string) (p2 t) s)
+ (vector-push-extend (list 'string p1 p2) s))
+ (:method ((p1 t) (p2 t) s) (vector-push-extend (list t p1 p2) s)))
+
+323: "REPLACE, BIT-BASH and large strings"
+ The transform for REPLACE on simple-base-strings uses BIT-BASH, which
+ at present has an upper limit in size. Consequently, in sbcl-0.8.10
+ (defun foo ()
+ (declare (optimize speed (safety 1)))
+ (let ((x (make-string 140000000))
+ (y (make-string 140000000)))
+ (length (replace x y))))
+ (foo)
+ gives
+ debugger invoked on a TYPE-ERROR in thread 2412:
+ The value 1120000000 is not of type (MOD 536870911).
+ (see also "more and better sequence transforms" sbcl-devel 2004-05-10)
+
+324: "STREAMs and :ELEMENT-TYPE with large bytesize"
+ In theory, (open foo :element-type '(unsigned-byte <x>)) should work
+ for all positive integral <x>. At present, it only works for <x> up
+ to about 1024 (and similarly for signed-byte), so
+ (open "/dev/zero" :element-type '(unsigned-byte 1025))
+ gives an error in sbcl-0.8.10.