(in-package "SB!C")
-;;; The front-end data structure (IR1) is composed of nodes and
-;;; continuations. The general idea is that continuations contain
-;;; top-down information and nodes contain bottom-up, derived
-;;; information. A continuation represents a place in the code, while
-;;; a node represents code that does something.
-;;;
-;;; This representation is more of a flow-graph than an augmented
-;;; syntax tree. The evaluation order is explicitly represented in the
-;;; linkage by continuations, rather than being implicit in the nodes
-;;; which receive the the results of evaluation. This allows us to
-;;; decouple the flow of results from the flow of control. A
-;;; continuation represents both, but the continuation can represent
-;;; the case of a discarded result by having no DEST.
+;;; The front-end data structure (IR1) is composed of nodes,
+;;; representing actual evaluations. Linear sequences of nodes in
+;;; control-flow order are combined into blocks (but see
+;;; JOIN-SUCCESSOR-IF-POSSIBLE for precise conditions); control
+;;; transfers inside a block are represented with CTRANs and between
+;;; blocks -- with BLOCK-SUCC/BLOCK-PRED lists; data transfers are
+;;; represented with LVARs.
-(def!struct (continuation
+;;; "Lead-in" Control TRANsfer [to some node]
+(def!struct (ctran
(:make-load-form-fun ignore-it)
- (:constructor make-continuation (&optional dest)))
+ (:constructor make-ctran))
;; an indication of the way that this continuation is currently used
;;
;; :UNUSED
;; until it is assigned a block, and may be also be temporarily
;; unused during later manipulations of IR1. In a consistent
;; state there should never be any mention of :UNUSED
- ;; continuations. Next can have a non-null value if the next node
+ ;; continuations. NEXT can have a non-null value if the next node
;; has already been determined.
;;
- ;; :DELETED
- ;; A continuation that has been deleted from IR1. Any pointers into
- ;; IR1 are cleared. There are two conditions under which a deleted
- ;; continuation may appear in code:
- ;; -- The CONT of the LAST node in a block may be a deleted
- ;; continuation when the original receiver of the continuation's
- ;; value was deleted. Note that DEST in a deleted continuation is
- ;; null, so it is easy to know not to attempt delivering any
- ;; values to the continuation.
- ;; -- Unreachable code that hasn't been deleted yet may receive
- ;; deleted continuations. All such code will be in blocks that
- ;; have DELETE-P set. All unreachable code is deleted by control
- ;; optimization, so the backend doesn't have to worry about this.
- ;;
;; :BLOCK-START
- ;; The continuation that is the START of BLOCK. This is the only kind
- ;; of continuation that can have more than one use. The BLOCK's
- ;; START-USES is a list of all the uses.
- ;;
- ;; :DELETED-BLOCK-START
- ;; Like :BLOCK-START, but BLOCK has been deleted. A block
- ;; starting continuation is made into a deleted block start when
- ;; the block is deleted, but the continuation still may have
- ;; value semantics. Since there isn't any code left, next is
- ;; null.
+ ;; The continuation that is the START of BLOCK.
;;
;; :INSIDE-BLOCK
- ;; A continuation that is the CONT of some node in BLOCK.
- (kind :unused :type (member :unused :deleted :inside-block :block-start
- :deleted-block-start))
- ;; The node which receives this value, if any. In a deleted
- ;; continuation, this is null even though the node that receives
- ;; this continuation may not yet be deleted.
- (dest nil :type (or node null))
- ;; If this is a NODE, then it is the node which is to be evaluated
- ;; next. This is always null in :DELETED and :UNUSED continuations,
- ;; and will be null in a :INSIDE-BLOCK continuation when this is the
- ;; CONT of the LAST.
+ ;; A continuation that is the NEXT of some node in BLOCK.
+ (kind :unused :type (member :unused :inside-block :block-start))
+ ;; A NODE which is to be evaluated next. Null only temporary.
(next nil :type (or node null))
- ;; an assertion on the type of this continuation's value
- (asserted-type *wild-type* :type ctype)
- ;; cached type of this continuation's value. If NIL, then this must
- ;; be recomputed: see CONTINUATION-DERIVED-TYPE.
- (%derived-type nil :type (or ctype null))
- ;; Node where this continuation is used, if unique. This is always
- ;; null in :DELETED and :UNUSED continuations, and is never null in
- ;; :INSIDE-BLOCK continuations. In a :BLOCK-START continuation, the
- ;; Block's START-USES indicate whether NIL means no uses or more
- ;; than one use.
+ ;; the node where this CTRAN is used, if unique. This is always null
+ ;; in :UNUSED and :BLOCK-START CTRANs, and is never null in
+ ;; :INSIDE-BLOCK continuations.
(use nil :type (or node null))
;; the basic block this continuation is in. This is null only in
- ;; :DELETED and :UNUSED continuations. Note that blocks that are
- ;; unreachable but still in the DFO may receive deleted
- ;; continuations, so it isn't o.k. to assume that any continuation
- ;; that you pick up out of its DEST node has a BLOCK.
- (block nil :type (or cblock null))
- ;; set to true when something about this continuation's value has
- ;; changed. See REOPTIMIZE-CONTINUATION. This provides a way for IR1
+ ;; :UNUSED continuations.
+ (block nil :type (or cblock null)))
+
+(def!method print-object ((x ctran) stream)
+ (print-unreadable-object (x stream :type t :identity t)
+ (format stream " #~D" (cont-num x))))
+
+;;; Linear VARiable. Multiple-value (possibly of unknown number)
+;;; temporal storage.
+(def!struct (lvar
+ (:make-load-form-fun ignore-it)
+ (:constructor make-lvar (&optional dest)))
+ ;; The node which receives this value. NIL only temporarily.
+ (dest nil :type (or node null))
+ ;; cached type of this lvar's value. If NIL, then this must be
+ ;; recomputed: see LVAR-DERIVED-TYPE.
+ (%derived-type nil :type (or ctype null))
+ ;; the node (if unique) or a list of nodes where this lvar is used.
+ (uses nil :type (or node list))
+ ;; set to true when something about this lvar's value has
+ ;; changed. See REOPTIMIZE-LVAR. This provides a way for IR1
;; optimize to determine which operands to a node have changed. If
;; the optimizer for this node type doesn't care, it can elect not
;; to clear this flag.
(reoptimize t :type boolean)
- ;; an indication of what we have proven about how this contination's
- ;; type assertion is satisfied:
- ;;
- ;; NIL
- ;; No type check is necessary (proven type is a subtype of the assertion.)
- ;;
- ;; T
- ;; A type check is needed.
- ;;
- ;; :DELETED
- ;; Don't do a type check, but believe (intersect) the assertion.
- ;; A T check can be changed to :DELETED if we somehow prove the
- ;; check is unnecessary, or if we eliminate it through a policy
- ;; decision.
- ;;
- ;; :NO-CHECK
- ;; Type check generation sets the slot to this if a check is
- ;; called for, but it believes it has proven that the check won't
- ;; be done for policy reasons or because a safe implementation
- ;; will be used. In the latter case, LTN must ensure that a safe
- ;; implementation *is* used.
- ;;
- ;; :ERROR
- ;; There is a compile-time type error in some use of this
- ;; continuation. A type check should still be generated, but be
- ;; careful.
- ;;
- ;; This is computed lazily by CONTINUATION-DERIVED-TYPE, so use
- ;; CONTINUATION-TYPE-CHECK instead of the %'ed slot accessor.
- (%type-check t :type (member t nil :deleted :no-check :error))
- ;; something or other that the back end annotates this continuation with
- (info nil)
- ;; uses of this continuation in the lexical environment. They are
- ;; recorded so that when one continuation is substituted for another
- ;; the environment may be updated properly.
- (lexenv-uses nil :type list))
+ ;; Cached type which is checked by DEST. If NIL, then this must be
+ ;; recomputed: see LVAR-EXTERNALLY-CHECKABLE-TYPE.
+ (%externally-checkable-type nil :type (or null ctype))
+ ;; something or other that the back end annotates this lvar with
+ (info nil))
-(def!method print-object ((x continuation) stream)
- (print-unreadable-object (x stream :type t :identity t)))
+(def!method print-object ((x lvar) stream)
+ (print-unreadable-object (x stream :type t :identity t)
+ (format stream " #~D" (cont-num x))))
(defstruct (node (:constructor nil)
(:copier nil))
- ;; the bottom-up derived type for this node. This does not take into
- ;; consideration output type assertions on this node (actually on its CONT).
- (derived-type *wild-type* :type ctype)
+ ;; unique ID for debugging
+ #!+sb-show (id (new-object-id) :read-only t)
;; True if this node needs to be optimized. This is set to true
- ;; whenever something changes about the value of a continuation
- ;; whose DEST is this node.
+ ;; whenever something changes about the value of an lvar whose DEST
+ ;; is this node.
(reoptimize t :type boolean)
- ;; the continuation which receives the value of this node. This also
- ;; indicates what we do controlwise after evaluating this node. This
- ;; may be null during IR1 conversion.
- (cont nil :type (or continuation null))
- ;; the continuation that this node is the next of. This is null
- ;; during IR1 conversion when we haven't linked the node in yet or
- ;; in nodes that have been deleted from the IR1 by UNLINK-NODE.
- (prev nil :type (or continuation null))
+ ;; the ctran indicating what we do controlwise after evaluating this
+ ;; node. This is null if the node is the last in its block.
+ (next nil :type (or ctran null))
+ ;; the ctran that this node is the NEXT of. This is null during IR1
+ ;; conversion when we haven't linked the node in yet or in nodes
+ ;; that have been deleted from the IR1 by UNLINK-NODE.
+ (prev nil :type (or ctran null))
;; the lexical environment this node was converted in
(lexenv *lexenv* :type lexenv)
;; a representation of the source code responsible for generating
;; can null out this slot.
(tail-p nil :type boolean))
+(defstruct (valued-node (:conc-name node-)
+ (:include node)
+ (:constructor nil)
+ (:copier nil))
+ ;; the bottom-up derived type for this node.
+ (derived-type *wild-type* :type ctype)
+ ;; Lvar, receiving the values, produced by this node. May be NIL if
+ ;; the value is unused.
+ (lvar nil :type (or lvar null)))
+
;;; Flags that are used to indicate various things about a block, such
;;; as what optimizations need to be done on it:
;;; -- REOPTIMIZE is set when something interesting happens the uses of a
-;;; continuation whose Dest is in this block. This indicates that the
+;;; lvar whose DEST is in this block. This indicates that the
;;; value-driven (forward) IR1 optimizations should be done on this block.
;;; -- FLUSH-P is set when code in this block becomes potentially flushable,
-;;; usually due to a continuation's DEST becoming null.
+;;; usually due to an lvar's DEST becoming null.
;;; -- TYPE-CHECK is true when the type check phase should be run on this
;;; block. IR1 optimize can introduce new blocks after type check has
;;; already run. We need to check these blocks, but there is no point in
;;; checking blocks we have already checked.
;;; -- DELETE-P is true when this block is used to indicate that this block
;;; has been determined to be unreachable and should be deleted. IR1
-;;; phases should not attempt to examine or modify blocks with DELETE-P
+;;; phases should not attempt to examine or modify blocks with DELETE-P
;;; set, since they may:
;;; - be in the process of being deleted, or
-;;; - have no successors, or
-;;; - receive :DELETED continuations.
+;;; - have no successors.
;;; -- TYPE-ASSERTED, TEST-MODIFIED
;;; These flags are used to indicate that something in this block
;;; might be of interest to constraint propagation. TYPE-ASSERTED
-;;; is set when a continuation type assertion is strengthened.
+;;; is set when an lvar type assertion is strengthened.
;;; TEST-MODIFIED is set whenever the test for the ending IF has
;;; changed (may be true when there is no IF.)
-(def-boolean-attribute block
+(!def-boolean-attribute block
reoptimize flush-p type-check delete-p type-asserted test-modified)
+;;; FIXME: Tweak so that definitions of e.g. BLOCK-DELETE-P is
+;;; findable by grep for 'def.*block-delete-p'.
(macrolet ((frob (slot)
`(defmacro ,(symbolicate "BLOCK-" slot) (block)
`(block-attributep (block-flags ,block) ,',slot))))
(:constructor make-block (start))
(:constructor make-block-key)
(:conc-name block-)
- (:predicate block-p)
- (:copier copy-block))
+ (:predicate block-p))
;; a list of all the blocks that are predecessors/successors of this
;; block. In well-formed IR1, most blocks will have one successor.
;; The only exceptions are:
;; 3. blocks with DELETE-P set (zero)
(pred nil :type list)
(succ nil :type list)
- ;; the continuation which heads this block (either a :BLOCK-START or
- ;; :DELETED-BLOCK-START), or NIL when we haven't made the start
- ;; continuation yet (and in the dummy component head and tail
- ;; blocks)
- (start nil :type (or continuation null))
- ;; a list of all the nodes that have START as their CONT
- (start-uses nil :type list)
+ ;; the ctran which heads this block (a :BLOCK-START), or NIL when we
+ ;; haven't made the start ctran yet (and in the dummy component head
+ ;; and tail blocks)
+ (start nil :type (or ctran null))
;; the last node in this block. This is NIL when we are in the
;; process of building a block (and in the dummy component head and
;; tail blocks.)
(flags (block-attributes reoptimize flush-p type-check type-asserted
test-modified)
:type attributes)
- ;; CMU CL had a KILL slot here, documented as "set used by
- ;; constraint propagation", which was used in constraint propagation
- ;; as a list of LAMBDA-VARs killed, and in copy propagation as an
- ;; SSET, representing I dunno what. I (WHN) found this confusing,
- ;; and furthermore it caused type errors when I was trying to make
- ;; the compiler produce fully general LAMBDA functions directly
- ;; (instead of doing as CMU CL always did, producing extra little
- ;; functions which return the LAMDBA you need) and therefore taking
- ;; a new path through the compiler. So I split this into two:
- ;; KILL-LIST = list of LAMBDA-VARs killed, used in constraint propagation
- ;; KILL-SSET = an SSET value, used in copy propagation
- (kill-list nil :type list)
- (kill-sset nil :type (or sset null))
+ ;; in constraint propagation: list of LAMBDA-VARs killed in this block
+ ;; in copy propagation: list of killed TNs
+ (kill nil)
;; other sets used in constraint propagation and/or copy propagation
(gen nil)
(in nil)
(out nil)
;; the component this block is in, or NIL temporarily during IR1
;; conversion and in deleted blocks
- (component *current-component* :type (or component null))
+ (component (progn
+ (aver-live-component *current-component*)
+ *current-component*)
+ :type (or component null))
;; a flag used by various graph-walking code to determine whether
;; this block has been processed already or what. We make this
;; initially NIL so that FIND-INITIAL-DFO doesn't have to scan the
(flag nil)
;; some kind of info used by the back end
(info nil)
- ;; If true, then constraints that hold in this block and its
- ;; successors by merit of being tested by its IF predecessor.
+ ;; constraints that hold in this block and its successors by merit
+ ;; of being tested by its IF predecessors.
(test-constraint nil :type (or sset null)))
(def!method print-object ((cblock cblock) stream)
(print-unreadable-object (cblock stream :type t :identity t)
- (format stream ":START c~D" (cont-num (block-start cblock)))))
+ (format stream "~W :START c~W"
+ (block-number cblock)
+ (cont-num (block-start cblock)))))
;;; The BLOCK-ANNOTATION class is inherited (via :INCLUDE) by
;;; different BLOCK-INFO annotation structures so that code
;; The IR1 block that this block is in the INFO for.
(block (missing-arg) :type cblock)
;; the next and previous block in emission order (not DFO). This
- ;; determines which block we drop though to, and also used to chain
- ;; together overflow blocks that result from splitting of IR2 blocks
- ;; in lifetime analysis.
+ ;; determines which block we drop though to, and is also used to
+ ;; chain together overflow blocks that result from splitting of IR2
+ ;; blocks in lifetime analysis.
(next nil :type (or block-annotation null))
(prev nil :type (or block-annotation null)))
;;; size of flow analysis problems, this allows back-end data
;;; structures to be reclaimed after the compilation of each
;;; component.
-(defstruct (component (:copier nil))
+(defstruct (component (:copier nil)
+ (:constructor
+ make-component (head tail &aux (last-block tail))))
+ ;; unique ID for debugging
+ #!+sb-show (id (new-object-id) :read-only t)
;; the kind of component
;;
;; (The terminology here is left over from before
;; the blocks that are the dummy head and tail of the DFO
;;
;; Entry/exit points have these blocks as their
- ;; predecessors/successors. Null temporarily. The start and return
- ;; from each non-deleted function is linked to the component head
- ;; and tail. Until physical environment analysis links NLX entry
- ;; stubs to the component head, every successor of the head is a
- ;; function start (i.e. begins with a BIND node.)
- (head nil :type (or null cblock))
- (tail nil :type (or null cblock))
+ ;; predecessors/successors. The start and return from each
+ ;; non-deleted function is linked to the component head and
+ ;; tail. Until physical environment analysis links NLX entry stubs
+ ;; to the component head, every successor of the head is a function
+ ;; start (i.e. begins with a BIND node.)
+ (head (missing-arg) :type cblock)
+ (tail (missing-arg) :type cblock)
+ ;; New blocks are inserted before this.
+ (last-block (missing-arg) :type cblock)
;; This becomes a list of the CLAMBDA structures for all functions
;; in this component. OPTIONAL-DISPATCHes are represented only by
;; their XEP and other associated lambdas. This doesn't contain any
;;
;; Note that logical associations between CLAMBDAs and COMPONENTs
;; seem to exist for a while before this is initialized. See e.g.
- ;; the NEW-FUNS slot. In particular, I got burned by writing some
- ;; code to use this value to decide which components need
+ ;; the NEW-FUNCTIONALS slot. In particular, I got burned by writing
+ ;; some code to use this value to decide which components need
;; LOCALL-ANALYZE-COMPONENT, when it turns out that
;; LOCALL-ANALYZE-COMPONENT had a role in initializing this value
;; (and DFO stuff does too, maybe). Also, even after it's
;; (possibly as LETs, or implicitly as XEPs if an OPTIONAL-DISPATCH.)
;; Between runs of local call analysis there may be some debris of
;; converted or even deleted functions in this list.
- (new-funs () :type list)
+ (new-functionals () :type list)
;; If this is true, then there is stuff in this component that could
;; benefit from further IR1 optimization.
(reoptimize t :type boolean)
(reanalyze nil :type boolean)
;; some sort of name for the code in this component
(name "<unknown>" :type simple-string)
- ;; some kind of info used by the back end
- (info nil)
+ ;; When I am a child, this is :NO-IR2-YET.
+ ;; In my adulthood, IR2 stores notes to itself here.
+ ;; After I have left the great wheel and am staring into the GC, this
+ ;; is set to :DEAD to indicate that it's a gruesome error to operate
+ ;; on me (e.g. by using me as *CURRENT-COMPONENT*, or by pushing
+ ;; LAMBDAs onto my NEW-FUNCTIONALS, as in sbcl-0.pre7.115).
+ (info :no-ir2-yet :type (or ir2-component (member :no-ir2-yet :dead)))
;; the SOURCE-INFO structure describing where this component was
;; compiled from
(source-info *source-info* :type source-info)
;; arguments for the note, or the FUN-TYPE that would have
;; enabled the transformation but failed to match.
(failed-optimizations (make-hash-table :test 'eq) :type hash-table)
- ;; This is similar to NEW-FUNS, but is used when a function has
- ;; already been analyzed, but new references have been added by
- ;; inline expansion. Unlike NEW-FUNS, this is not disjoint from
- ;; COMPONENT-LAMBDAS.
- (reanalyze-funs nil :type list))
+ ;; This is similar to NEW-FUNCTIONALS, but is used when a function
+ ;; has already been analyzed, but new references have been added by
+ ;; inline expansion. Unlike NEW-FUNCTIONALS, this is not disjoint
+ ;; from COMPONENT-LAMBDAS.
+ (reanalyze-functionals nil :type list)
+ (delete-blocks nil :type list)
+ (nlx-info-generated-p nil :type boolean))
(defprinter (component :identity t)
name
+ #!+sb-show id
(reanalyze :test reanalyze))
+;;; Check that COMPONENT is suitable for roles which involve adding
+;;; new code. (gotta love imperative programming with lotso in-place
+;;; side effects...)
+(defun aver-live-component (component)
+ ;; FIXME: As of sbcl-0.pre7.115, we're asserting that
+ ;; COMPILE-COMPONENT hasn't happened yet. Might it be even better
+ ;; (certainly stricter, possibly also correct...) to assert that
+ ;; IR1-FINALIZE hasn't happened yet?
+ (aver (not (eql (component-info component) :dead))))
+
;;; Before sbcl-0.7.0, there were :TOPLEVEL things which were magical
;;; in multiple ways. That's since been refactored into the orthogonal
;;; properties "optimized for locall with no arguments" and "externally
;;; The "mess-up" action is explicitly represented by a funny function
;;; call or ENTRY node.
;;;
-;;; We guarantee that CLEANUPs only need to be done at block boundaries
-;;; by requiring that the exit continuations initially head their
+;;; We guarantee that CLEANUPs only need to be done at block
+;;; boundaries by requiring that the exit ctrans initially head their
;;; blocks, and then by not merging blocks when there is a cleanup
;;; change.
(defstruct (cleanup (:copier nil))
;; the kind of thing that has to be cleaned up
(kind (missing-arg)
- :type (member :special-bind :catch :unwind-protect :block :tagbody))
+ :type (member :special-bind :catch :unwind-protect
+ :block :tagbody :dynamic-extent))
;; the node that messes things up. This is the last node in the
;; non-messed-up environment. Null only temporarily. This could be
;; deleted due to unreachability.
(defstruct (physenv (:copier nil))
;; the function that allocates this physical environment
(lambda (missing-arg) :type clambda :read-only t)
- #| ; seems not to be used as of sbcl-0.pre7.51
- ;; a list of all the lambdas that allocate variables in this
- ;; physical environment
- (lambdas nil :type list)
- |#
;; This ultimately converges to a list of all the LAMBDA-VARs and
;; NLX-INFOs needed from enclosing environments by code in this
;; physical environment. In the meantime, it may be
type
(info :test info))
-;;; The NLX-Info structure is used to collect various information
-;;; about non-local exits. This is effectively an annotation on the
-;;; CONTINUATION, although it is accessed by searching in the
+;;; An NLX-INFO structure is used to collect various information about
+;;; non-local exits. This is effectively an annotation on the
+;;; continuation, although it is accessed by searching in the
;;; PHYSENV-NLX-INFO.
-(def!struct (nlx-info (:make-load-form-fun ignore-it))
+(def!struct (nlx-info (:constructor make-nlx-info
+ (cleanup exit &aux (lvar (node-lvar exit))))
+ (:make-load-form-fun ignore-it))
;; the cleanup associated with this exit. In a catch or
;; unwind-protect, this is the :CATCH or :UNWIND-PROTECT cleanup,
;; and not the cleanup for the escape block. The CLEANUP-KIND of
;;
;; This slot is primarily an indication of where this exit delivers
;; its values to (if any), but it is also used as a sort of name to
- ;; allow us to find the NLX-Info that corresponds to a given exit.
- ;; For this purpose, the Entry must also be used to disambiguate,
+ ;; allow us to find the NLX-INFO that corresponds to a given exit.
+ ;; For this purpose, the ENTRY must also be used to disambiguate,
;; since exits to different places may deliver their result to the
;; same continuation.
- (continuation (missing-arg) :type continuation)
+ (exit (missing-arg) :type exit)
+ (lvar (missing-arg) :type (or lvar null))
;; the entry stub inserted by physical environment analysis. This is
- ;; a block containing a call to the %NLX-Entry funny function that
+ ;; a block containing a call to the %NLX-ENTRY funny function that
;; has the original exit destination as its successor. Null only
;; temporarily.
(target nil :type (or cblock null))
;; some kind of info used by the back end
info)
(defprinter (nlx-info :identity t)
- continuation
+ exit
target
info)
\f
;;; hacking the flow graph.
(def!struct (leaf (:make-load-form-fun ignore-it)
(:constructor nil))
+ ;; unique ID for debugging
+ #!+sb-show (id (new-object-id) :read-only t)
;; (For public access to this slot, use LEAF-SOURCE-NAME.)
;;
;; the name of LEAF as it appears in the source, e.g. 'FOO or '(SETF
;; skewed enough (e.g. for macro functions or method functions) that
;; we don't want to have that name affect compilation
;;
+ ;; (We use .ANONYMOUS. here more or less the way we'd ordinarily use
+ ;; NIL, but we're afraid to use NIL because it's a symbol which could
+ ;; be the name of a leaf, if only the constant named NIL.)
+ ;;
;; The value of this slot in can affect ordinary runtime behavior,
;; e.g. of special variables and known functions, not just debugging.
;;
;; true if there was ever a REF or SET node for this leaf. This may
;; be true when REFS and SETS are null, since code can be deleted.
(ever-used nil :type boolean)
+ ;; is it declared dynamic-extent?
+ (dynamic-extent nil :type boolean)
;; some kind of info used by the back end
(info nil))
(sets () :type list))
;;; The GLOBAL-VAR structure represents a value hung off of the symbol
-;;; NAME. We use a :CONSTANT VAR when we know that the thing is a
-;;; constant, but don't know what the value is at compile time.
+;;; NAME.
(def!struct (global-var (:include basic-var))
;; kind of variable described
(kind (missing-arg)
:type (member :special :global-function :global)))
(defprinter (global-var :identity t)
%source-name
+ #!+sb-show id
(type :test (not (eq type *universal-type*)))
(where-from :test (not (eq where-from :assumed)))
kind)
-;;; The SLOT-ACCESSOR structure represents slot accessor functions. It
-;;; is a subtype of GLOBAL-VAR to make it look more like a normal
-;;; function.
-(def!struct (slot-accessor (:include global-var
- (where-from :defined)
- (kind :global-function)))
- ;; The description of the structure that this is an accessor for.
- (for (missing-arg) :type sb!xc:class)
- ;; The slot description of the slot.
- (slot (missing-arg)))
-(defprinter (slot-accessor :identity t)
- %source-name
- for
- slot)
-
;;; A DEFINED-FUN represents a function that is defined in the same
;;; compilation block, or that has an inline expansion, or that has a
;;; non-NIL INLINEP value. Whenever we change the INLINEP state (i.e.
(functional nil :type (or functional null)))
(defprinter (defined-fun :identity t)
%source-name
+ #!+sb-show id
inlinep
(functional :test functional))
\f
;; Unlike the SOURCE-NAME slot, this slot's value should never
;; affect ordinary code behavior, only debugging/diagnostic behavior.
;;
+ ;; Ha. Ah, the starry-eyed idealism of the writer of the above
+ ;; paragraph. FUNCTION-LAMBDA-EXPRESSION's behaviour, as of
+ ;; sbcl-0.7.11.x, differs if the name of the a function is a string
+ ;; or not, as if it is a valid function name then it can look for an
+ ;; inline expansion.
+ ;;
;; The value of this slot can be anything, except that it shouldn't
;; be a legal function name, since otherwise debugging gets
;; confusing. (If a legal function name is a good name for the
;; a lambda that is used in only one local call, and has in
;; effect been substituted directly inline. The return node is
;; deleted, and the result is computed with the actual result
- ;; continuation for the call.
+ ;; lvar for the call.
;;
;; :MV-LET
- ;; Similar to :LET, but the call is an MV-CALL.
+ ;; Similar to :LET (as per FUNCTIONAL-LETLIKE-P), but the call
+ ;; is an MV-CALL.
;;
;; :ASSIGNMENT
- ;; similar to a LET, but can have other than one call as long as
- ;; there is at most one non-tail call.
+ ;; similar to a LET (as per FUNCTIONAL-SOMEWHAT-LETLIKE-P), but
+ ;; can have other than one call as long as there is at most
+ ;; one non-tail call.
;;
;; :OPTIONAL
- ;; a lambda that is an entry-point for an optional-dispatch.
+ ;; a lambda that is an entry point for an OPTIONAL-DISPATCH.
;; Similar to NIL, but requires greater caution, since local call
;; analysis may create new references to this function. Also, the
;; function cannot be deleted even if it has *no* references. The
;; :DELETED
;; This function has been found to be uncallable, and has been
;; marked for deletion.
+ ;;
+ ;; :ZOMBIE
+ ;; Effectless [MV-]LET; has no BIND node.
(kind nil :type (member nil :optional :deleted :external :toplevel
:escape :cleanup :let :mv-let :assignment
- :toplevel-xep))
+ :zombie :toplevel-xep))
;; Is this a function that some external entity (e.g. the fasl dumper)
;; refers to, so that even when it appears to have no references, it
;; shouldn't be deleted? In the old days (before
;; KIND was :TOPLEVEL. Now it must be set explicitly, both for
;; :TOPLEVEL functions and for any other kind of functions that we
;; want to dump or return from #'CL:COMPILE or whatever.
- (has-external-references-p nil)
+ (has-external-references-p nil)
;; In a normal function, this is the external entry point (XEP)
;; lambda for this function, if any. Each function that is used
;; other than in a local call has an XEP, and all of the
;;
;; With all other kinds, this is null.
(entry-fun nil :type (or functional null))
- ;; the value of any inline/notinline declaration for a local function
+ ;; the value of any inline/notinline declaration for a local
+ ;; function (or NIL in any case if no inline expansion is available)
(inlinep nil :type inlinep)
;; If we have a lambda that can be used as in inline expansion for
;; this function, then this is it. If there is no source-level
- ;; lambda corresponding to this function then this is Null (but then
+ ;; lambda corresponding to this function then this is null (but then
;; INLINEP will always be NIL as well.)
(inline-expansion nil :type list)
- ;; the lexical environment that the inline-expansion should be converted in
+ ;; the lexical environment that the INLINE-EXPANSION should be converted in
(lexenv *lexenv* :type lexenv)
;; the original function or macro lambda list, or :UNSPECIFIED if
;; this is a compiler created function
(plist () :type list))
(defprinter (functional :identity t)
%source-name
- %debug-name)
+ %debug-name
+ #!+sb-show id)
+
+;;; Is FUNCTIONAL LET-converted? (where we're indifferent to whether
+;;; it returns one value or multiple values)
+(defun functional-letlike-p (functional)
+ (member (functional-kind functional)
+ '(:let :mv-let)))
+
+;;; Is FUNCTIONAL sorta LET-converted? (where even an :ASSIGNMENT counts)
+;;;
+;;; FIXME: I (WHN) don't understand this one well enough to give a good
+;;; definition or even a good function name, it's just a literal copy
+;;; of a CMU CL idiom. Does anyone have a better name or explanation?
+(defun functional-somewhat-letlike-p (functional)
+ (or (functional-letlike-p functional)
+ (eql (functional-kind functional) :assignment)))
;;; FUNCTIONAL name operations
(defun functional-debug-name (functional)
;; anonymous. In SBCL (as opposed to CMU CL) we make all
;; FUNCTIONALs have debug names. The CMU CL code didn't bother
;; in many FUNCTIONALs, especially those which were likely to be
- ;; optimized away before the user saw them. However, getting
+ ;; optimized away before the user saw them. However, getting
;; that right requires a global understanding of the code,
;; which seems bad, so we just require names for everything.
(leaf-source-name functional)))
;; bind (because there are no variables left), but have not yet
;; actually deleted the LAMBDA yet.
(bind nil :type (or bind null))
- ;; the RETURN node for this LAMBDA, or NIL if it has been deleted.
- ;; This marks the end of the lambda, receiving the result of the
- ;; body. In a LET, the return node is deleted, and the body delivers
- ;; the value to the actual continuation. The return may also be
+ ;; the RETURN node for this LAMBDA, or NIL if it has been
+ ;; deleted. This marks the end of the lambda, receiving the result
+ ;; of the body. In a LET, the return node is deleted, and the body
+ ;; delivers the value to the actual lvar. The return may also be
;; deleted if it is unreachable.
(return nil :type (or creturn null))
;; If this CLAMBDA is a LET, then this slot holds the LAMBDA whose
;; LETS list we are in, otherwise it is a self-pointer.
(home nil :type (or clambda null))
- ;; a list of all the all the lambdas that have been LET-substituted
- ;; in this lambda. This is only non-null in lambdas that aren't
- ;; LETs.
- (lets () :type list)
- ;; a list of all the ENTRY nodes in this function and its LETs, or
- ;; null in a LET
- (entries () :type list)
- ;; a list of all the functions directly called from this function
- ;; (or one of its LETs) using a non-LET local call. This may include
- ;; deleted functions because nobody bothers to clear them out.
- (calls () :type list)
+ ;; all the lambdas that have been LET-substituted in this lambda.
+ ;; This is only non-null in lambdas that aren't LETs.
+ (lets nil :type list)
+ ;; all the ENTRY nodes in this function and its LETs, or null in a LET
+ (entries nil :type list)
+ ;; CLAMBDAs which are locally called by this lambda, and other
+ ;; objects (closed-over LAMBDA-VARs and XEPs) which this lambda
+ ;; depends on in such a way that DFO shouldn't put them in separate
+ ;; components.
+ (calls-or-closes nil :type list)
;; the TAIL-SET that this LAMBDA is in. This is null during creation.
;;
;; In CMU CL, and old SBCL, this was also NILed out when LET
;; retain it so that if the LET is deleted (due to a lack of vars),
;; we will still have caller's lexenv to figure out which cleanup is
;; in effect.
- (call-lexenv nil :type (or lexenv null)))
+ (call-lexenv nil :type (or lexenv null))
+ ;; list of embedded lambdas
+ (children nil :type list)
+ (parent nil :type (or clambda null)))
(defprinter (clambda :conc-name lambda- :identity t)
%source-name
%debug-name
+ #!+sb-show id
+ kind
(type :test (not (eq type *universal-type*)))
(where-from :test (not (eq where-from :assumed)))
(vars :prin1 (mapcar #'leaf-source-name vars)))
;; the total number of required and optional arguments. Args at
;; positions >= to this are &REST, &KEY or illegal args.
(max-args 0 :type unsigned-byte)
- ;; list of the LAMBDAs which are the entry points for non-rest,
- ;; non-key calls. The entry for MIN-ARGS is first, MIN-ARGS+1
- ;; second, ... MAX-ARGS last. The last entry-point always calls the
- ;; main entry; in simple cases it may be the main entry.
+ ;; list of the (maybe delayed) LAMBDAs which are the entry points
+ ;; for non-rest, non-key calls. The entry for MIN-ARGS is first,
+ ;; MIN-ARGS+1 second, ... MAX-ARGS last. The last entry-point always
+ ;; calls the main entry; in simple cases it may be the main entry.
(entry-points nil :type list)
;; an entry point which takes MAX-ARGS fixed arguments followed by
;; an argument context pointer and an argument count. This entry
(defprinter (optional-dispatch :identity t)
%source-name
%debug-name
+ #!+sb-show id
(type :test (not (eq type *universal-type*)))
(where-from :test (not (eq where-from :assumed)))
arglist
;;; end must check for and ignore unreferenced variables. Note that a
;;; deleted LAMBDA-VAR may have sets; in this case the back end is
;;; still responsible for propagating the SET-VALUE to the set's CONT.
-(def!struct (lambda-var (:include basic-var))
+(!def-boolean-attribute lambda-var
;; true if this variable has been declared IGNORE
- (ignorep nil :type boolean)
- ;; the CLAMBDA that this var belongs to. This may be null when we are
- ;; building a lambda during IR1 conversion.
- (home nil :type (or null clambda))
+ ignore
;; This is set by physical environment analysis if it chooses an
;; indirect (value cell) representation for this variable because it
;; is both set and closed over.
- (indirect nil :type boolean)
+ indirect)
+
+(def!struct (lambda-var (:include basic-var))
+ (flags (lambda-var-attributes)
+ :type attributes)
+ ;; the CLAMBDA that this var belongs to. This may be null when we are
+ ;; building a lambda during IR1 conversion.
+ (home nil :type (or null clambda))
;; The following two slots are only meaningful during IR1 conversion
;; of hairy lambda vars:
;;
(constraints nil :type (or sset null)))
(defprinter (lambda-var :identity t)
%source-name
+ #!+sb-show id
(type :test (not (eq type *universal-type*)))
(where-from :test (not (eq where-from :assumed)))
- (ignorep :test ignorep)
+ (flags :test (not (zerop flags))
+ :prin1 (decode-lambda-var-attributes flags))
(arg-info :test arg-info)
(specvar :test specvar))
+
+(defmacro lambda-var-ignorep (var)
+ `(lambda-var-attributep (lambda-var-flags ,var) ignore))
+(defmacro lambda-var-indirect (var)
+ `(lambda-var-attributep (lambda-var-flags ,var) indirect))
\f
;;;; basic node types
;;; A REF represents a reference to a LEAF. REF-REOPTIMIZE is
;;; initially (and forever) NIL, since REFs don't receive any values
;;; and don't have any IR1 optimizer.
-(defstruct (ref (:include node (:reoptimize nil))
- (:constructor make-ref (derived-type leaf))
+(defstruct (ref (:include valued-node (reoptimize nil))
+ (:constructor make-ref
+ (leaf
+ &aux (leaf-type (leaf-type leaf))
+ (derived-type
+ (make-single-value-type leaf-type))))
(:copier nil))
;; The leaf referenced.
(leaf nil :type leaf))
(defprinter (ref :identity t)
+ #!+sb-show id
leaf)
;;; Naturally, the IF node always appears at the end of a block.
-;;; NODE-CONT is a dummy continuation, and is there only to keep
-;;; people happy.
(defstruct (cif (:include node)
(:conc-name if-)
(:predicate if-p)
(:constructor make-if)
(:copier copy-if))
- ;; CONTINUATION for the predicate
- (test (missing-arg) :type continuation)
+ ;; LVAR for the predicate
+ (test (missing-arg) :type lvar)
;; the blocks that we execute next in true and false case,
;; respectively (may be the same)
(consequent (missing-arg) :type cblock)
(alternative (missing-arg) :type cblock))
(defprinter (cif :conc-name if- :identity t)
- (test :prin1 (continuation-use test))
+ (test :prin1 (lvar-uses test))
consequent
alternative)
-(defstruct (cset (:include node
- (derived-type *universal-type*))
+(defstruct (cset (:include valued-node
+ (derived-type (make-single-value-type
+ *universal-type*)))
(:conc-name set-)
(:predicate set-p)
(:constructor make-set)
(:copier copy-set))
;; descriptor for the variable set
(var (missing-arg) :type basic-var)
- ;; continuation for the value form
- (value (missing-arg) :type continuation))
+ ;; LVAR for the value form
+ (value (missing-arg) :type lvar))
(defprinter (cset :conc-name set- :identity t)
var
- (value :prin1 (continuation-use value)))
+ (value :prin1 (lvar-uses value)))
;;; The BASIC-COMBINATION structure is used to represent both normal
-;;; and multiple value combinations. In a local function call, this
+;;; and multiple value combinations. In a let-like function call, this
;;; node appears at the end of its block and the body of the called
-;;; function appears as the successor. The NODE-CONT remains the
-;;; continuation which receives the value of the call.
-(defstruct (basic-combination (:include node)
+;;; function appears as the successor; the NODE-LVAR is null.
+(defstruct (basic-combination (:include valued-node)
(:constructor nil)
(:copier nil))
- ;; continuation for the function
- (fun (missing-arg) :type continuation)
- ;; list of CONTINUATIONs for the args. In a local call, an argument
- ;; continuation may be replaced with NIL to indicate that the
- ;; corresponding variable is unreferenced, and thus no argument
- ;; value need be passed.
+ ;; LVAR for the function
+ (fun (missing-arg) :type lvar)
+ ;; list of LVARs for the args. In a local call, an argument lvar may
+ ;; be replaced with NIL to indicate that the corresponding variable
+ ;; is unreferenced, and thus no argument value need be passed.
(args nil :type list)
;; the kind of function call being made. :LOCAL means that this is a
;; local call to a function in the same component, and that argument
- ;; syntax checking has been done, etc. Calls to known global
- ;; functions are represented by storing the FUNCTION-INFO for the
- ;; function in this slot. :FULL is a call to an (as yet) unknown
- ;; function. :ERROR is like :FULL, but means that we have discovered
- ;; that the call contains an error, and should not be reconsidered
- ;; for optimization.
- (kind :full :type (or (member :local :full :error) function-info))
+ ;; syntax checking has been done, etc. Calls to known global
+ ;; functions are represented by storing :KNOWN in this slot and the
+ ;; FUN-INFO for that function in the FUN-INFO slot. :FULL is a call
+ ;; to an (as yet) unknown function, or to a known function declared
+ ;; NOTINLINE. :ERROR is like :FULL, but means that we have
+ ;; discovered that the call contains an error, and should not be
+ ;; reconsidered for optimization.
+ (kind :full :type (member :local :full :error :known))
+ ;; if a call to a known global function, contains the FUN-INFO.
+ (fun-info nil :type (or fun-info null))
;; some kind of information attached to this node by the back end
(info nil))
(:constructor make-combination (fun))
(:copier nil)))
(defprinter (combination :identity t)
- (fun :prin1 (continuation-use fun))
+ #!+sb-show id
+ (fun :prin1 (lvar-uses fun))
(args :prin1 (mapcar (lambda (x)
(if x
- (continuation-use x)
+ (lvar-uses x)
"<deleted>"))
args)))
(:constructor make-mv-combination (fun))
(:copier nil)))
(defprinter (mv-combination)
- (fun :prin1 (continuation-use fun))
- (args :prin1 (mapcar #'continuation-use args)))
+ (fun :prin1 (lvar-uses fun))
+ (args :prin1 (mapcar #'lvar-uses args)))
;;; The BIND node marks the beginning of a lambda body and represents
;;; the creation and initialization of the variables.
;; the lambda we are returning from. Null temporarily during
;; ir1tran.
(lambda nil :type (or clambda null))
- ;; the continuation which yields the value of the lambda
- (result (missing-arg) :type continuation)
+ ;; the lvar which yields the value of the lambda
+ (result (missing-arg) :type lvar)
;; the union of the node-derived-type of all uses of the result
;; other than by a local call, intersected with the result's
;; asserted-type. If there are no non-call uses, this is
(defprinter (creturn :conc-name return- :identity t)
lambda
result-type)
+
+;;; The CAST node represents type assertions. The check for
+;;; TYPE-TO-CHECK is performed and then the VALUE is declared to be of
+;;; type ASSERTED-TYPE.
+(defstruct (cast (:include valued-node)
+ (:constructor %make-cast))
+ (asserted-type (missing-arg) :type ctype)
+ (type-to-check (missing-arg) :type ctype)
+ ;; an indication of what we have proven about how this type
+ ;; assertion is satisfied:
+ ;;
+ ;; NIL
+ ;; No type check is necessary (VALUE type is a subtype of the TYPE-TO-CHECK.)
+ ;;
+ ;; :EXTERNAL
+ ;; Type check will be performed by NODE-DEST.
+ ;;
+ ;; T
+ ;; A type check is needed.
+ (%type-check t :type (member t :external nil))
+ ;; the lvar which is checked
+ (value (missing-arg) :type lvar))
+(defprinter (cast :identity t)
+ %type-check
+ value
+ asserted-type
+ type-to-check)
\f
;;;; non-local exit support
;;;;
;;;; lexical exits.
;;; The ENTRY node serves to mark the start of the dynamic extent of a
-;;; lexical exit. It is the mess-up node for the corresponding :Entry
+;;; lexical exit. It is the mess-up node for the corresponding :ENTRY
;;; cleanup.
(defstruct (entry (:include node)
(:copier nil))
- ;; All of the Exit nodes for potential non-local exits to this point.
+ ;; All of the EXIT nodes for potential non-local exits to this point.
(exits nil :type list)
;; The cleanup for this entry. NULL only temporarily.
(cleanup nil :type (or cleanup null)))
-(defprinter (entry :identity t))
+(defprinter (entry :identity t)
+ #!+sb-show id)
;;; The EXIT node marks the place at which exit code would be emitted,
;;; if necessary. This is interposed between the uses of the exit
;;; continuation and the exit continuation's DEST. Instead of using
;;; the returned value being delivered directly to the exit
-;;; continuation, it is delivered to our VALUE continuation. The
-;;; original exit continuation is the exit node's CONT.
-(defstruct (exit (:include node)
+;;; continuation, it is delivered to our VALUE lvar. The original exit
+;;; lvar is the exit node's LVAR; physenv analysis also makes it the
+;;; lvar of %NLX-ENTRY call.
+(defstruct (exit (:include valued-node)
(:copier nil))
- ;; The Entry node that this is an exit for. If null, this is a
+ ;; the ENTRY node that this is an exit for. If null, this is a
;; degenerate exit. A degenerate exit is used to "fill" an empty
;; block (which isn't allowed in IR1.) In a degenerate exit, Value
;; is always also null.
(entry nil :type (or entry null))
- ;; The continuation yeilding the value we are to exit with. If NIL,
- ;; then no value is desired (as in GO).
- (value nil :type (or continuation null)))
+ ;; the lvar yielding the value we are to exit with. If NIL, then no
+ ;; value is desired (as in GO).
+ (value nil :type (or lvar null)))
(defprinter (exit :identity t)
+ #!+sb-show id
(entry :test entry)
(value :test value))
\f
;;;; Freeze some structure types to speed type testing.
#!-sb-fluid
-(declaim (freeze-type node leaf lexenv continuation cblock component cleanup
+(declaim (freeze-type node leaf lexenv ctran lvar cblock component cleanup
physenv tail-set nlx-info))