(declare (type unsigned-byte n))
(if (< n register-arg-count)
(make-wired-tn *backend-t-primitive-type* descriptor-reg-sc-number
- (nth n *register-arg-offsets*))
+ (nth n *register-arg-offsets*))
(make-wired-tn *backend-t-primitive-type* control-stack-sc-number n)))
;;; Make a passing location TN for a local call return PC.
(!def-vm-support-routine make-return-pc-passing-location (standard)
(declare (ignore standard))
(make-wired-tn (primitive-type-or-lose 'system-area-pointer)
- sap-stack-sc-number return-pc-save-offset))
+ sap-stack-sc-number return-pc-save-offset))
;;; This is similar to MAKE-RETURN-PC-PASSING-LOCATION, but makes a
;;; location to pass OLD-FP in.
(!def-vm-support-routine make-old-fp-passing-location (standard)
(declare (ignore standard))
(make-wired-tn *fixnum-primitive-type* control-stack-sc-number
- ocfp-save-offset))
+ ocfp-save-offset))
;;; Make the TNs used to hold OLD-FP and RETURN-PC within the current
;;; function. We treat these specially so that the debugger can find
;;; them at a known location.
;;;
;;; Without using a save-tn - which does not make much sense if it is
-;;; wired to the stack?
+;;; wired to the stack?
(!def-vm-support-routine make-old-fp-save-location (physenv)
(physenv-debug-live-tn (make-wired-tn *fixnum-primitive-type*
- control-stack-sc-number
- ocfp-save-offset)
- physenv))
+ control-stack-sc-number
+ ocfp-save-offset)
+ physenv))
(!def-vm-support-routine make-return-pc-save-location (physenv)
(physenv-debug-live-tn
(make-wired-tn (primitive-type-or-lose 'system-area-pointer)
- sap-stack-sc-number return-pc-save-offset)
+ sap-stack-sc-number return-pc-save-offset)
physenv))
;;; Make a TN for the standard argument count passing location. We only
;;; continuation within a function.
(!def-vm-support-routine make-unknown-values-locations ()
(list (make-stack-pointer-tn)
- (make-normal-tn *fixnum-primitive-type*)))
+ (make-normal-tn *fixnum-primitive-type*)))
;;; This function is called by the ENTRY-ANALYZE phase, allowing
;;; VM-dependent initialization of the IR2-COMPONENT structure. We
;; we'll just live with this ugliness. -- WHN 2002-01-02
(dotimes (i (1+ code-constants-offset))
(vector-push-extend nil
- (ir2-component-constants (component-info component))))
+ (ir2-component-constants (component-info component))))
(values))
\f
;;;; frame hackery
;; The start of the actual code.
;; Save the return-pc.
- (popw ebp-tn (- (1+ return-pc-save-offset)))
+ (popw ebp-tn (frame-word-offset return-pc-save-offset))
;; If copy-more-arg follows it will allocate the correct stack
;; size. The stack is not allocated first here as this may expose
(unless copy-more-arg-follows
;; The args fit within the frame so just allocate the frame.
(inst lea esp-tn
- (make-ea :dword :base ebp-tn
- :disp (- (* n-word-bytes
- (max 3 (sb-allocated-size 'stack)))))))
+ (make-ea :dword :base ebp-tn
+ :disp (- (* n-word-bytes
+ (max 3 (sb-allocated-size 'stack)))))))
(trace-table-entry trace-table-normal)))
;;; callee (who has the same size stack as us).
(define-vop (allocate-frame)
(:results (res :scs (any-reg control-stack))
- (nfp))
+ (nfp))
(:info callee)
(:ignore nfp callee)
(:generator 2
;;; returned, regardless of the number of values desired.
(defun default-unknown-values (vop values nvals)
(declare (type (or tn-ref null) values)
- (type unsigned-byte nvals))
+ (type unsigned-byte nvals))
(cond
((<= nvals 1)
(note-this-location vop :single-value-return)
- (inst mov esp-tn ebx-tn))
+ (let ((single-value (gen-label)))
+ (cond
+ ((member :cmov *backend-subfeatures*)
+ (inst cmov :c esp-tn ebx-tn))
+ (t
+ (inst jmp :nc single-value)
+ (inst mov esp-tn ebx-tn)
+ (emit-label single-value)))))
((<= nvals register-arg-count)
(let ((regs-defaulted (gen-label)))
(note-this-location vop :unknown-return)
- (inst jmp-short regs-defaulted)
+ (inst jmp :c regs-defaulted)
;; Default the unsuppled registers.
(let* ((2nd-tn-ref (tn-ref-across values))
- (2nd-tn (tn-ref-tn 2nd-tn-ref)))
- (inst mov 2nd-tn nil-value)
- (when (> nvals 2)
- (loop
- for tn-ref = (tn-ref-across 2nd-tn-ref)
- then (tn-ref-across tn-ref)
- for count from 2 below register-arg-count
- do (inst mov (tn-ref-tn tn-ref) 2nd-tn))))
+ (2nd-tn (tn-ref-tn 2nd-tn-ref)))
+ (inst mov 2nd-tn nil-value)
+ (when (> nvals 2)
+ (loop
+ for tn-ref = (tn-ref-across 2nd-tn-ref)
+ then (tn-ref-across tn-ref)
+ for count from 2 below register-arg-count
+ do (inst mov (tn-ref-tn tn-ref) 2nd-tn))))
(inst mov ebx-tn esp-tn)
(emit-label regs-defaulted)
(inst mov esp-tn ebx-tn)))
;; NVALS=6 that is 73/89 bytes, and for NVALS=7 that is 87/107
;; bytes which is likely better than using the blt below.
(let ((regs-defaulted (gen-label))
- (defaulting-done (gen-label))
- (default-stack-slots (gen-label)))
+ (defaulting-done (gen-label))
+ (default-stack-slots (gen-label)))
(note-this-location vop :unknown-return)
;; Branch off to the MV case.
- (inst jmp-short regs-defaulted)
+ (inst jmp :c regs-defaulted)
;; Do the single value case.
;; Default the register args
(inst mov eax-tn nil-value)
(do ((i 1 (1+ i))
- (val (tn-ref-across values) (tn-ref-across val)))
- ((= i (min nvals register-arg-count)))
- (inst mov (tn-ref-tn val) eax-tn))
+ (val (tn-ref-across values) (tn-ref-across val)))
+ ((= i (min nvals register-arg-count)))
+ (inst mov (tn-ref-tn val) eax-tn))
;; Fake other registers so it looks like we returned with all the
;; registers filled in.
(inst mov eax-tn nil-value)
(storew edx-tn ebx-tn -1)
(collect ((defaults))
- (do ((i register-arg-count (1+ i))
- (val (do ((i 0 (1+ i))
- (val values (tn-ref-across val)))
- ((= i register-arg-count) val))
- (tn-ref-across val)))
- ((null val))
- (let ((default-lab (gen-label))
- (tn (tn-ref-tn val)))
- (defaults (cons default-lab tn))
-
- (inst cmp ecx-tn (fixnumize i))
- (inst jmp :be default-lab)
- (loadw edx-tn ebx-tn (- (1+ i)))
- (inst mov tn edx-tn)))
-
- (emit-label defaulting-done)
- (loadw edx-tn ebx-tn -1)
- (move esp-tn ebx-tn)
-
- (let ((defaults (defaults)))
- (when defaults
- (assemble (*elsewhere*)
- (trace-table-entry trace-table-fun-prologue)
- (emit-label default-stack-slots)
- (dolist (default defaults)
- (emit-label (car default))
- (inst mov (cdr default) eax-tn))
- (inst jmp defaulting-done)
- (trace-table-entry trace-table-normal)))))))
+ (do ((i register-arg-count (1+ i))
+ (val (do ((i 0 (1+ i))
+ (val values (tn-ref-across val)))
+ ((= i register-arg-count) val))
+ (tn-ref-across val)))
+ ((null val))
+ (let ((default-lab (gen-label))
+ (tn (tn-ref-tn val)))
+ (defaults (cons default-lab tn))
+
+ (inst cmp ecx-tn (fixnumize i))
+ (inst jmp :be default-lab)
+ (loadw edx-tn ebx-tn (frame-word-offset i))
+ (inst mov tn edx-tn)))
+
+ (emit-label defaulting-done)
+ (loadw edx-tn ebx-tn -1)
+ (move esp-tn ebx-tn)
+
+ (let ((defaults (defaults)))
+ (when defaults
+ (assemble (*elsewhere*)
+ (trace-table-entry trace-table-fun-prologue)
+ (emit-label default-stack-slots)
+ (dolist (default defaults)
+ (emit-label (car default))
+ (inst mov (cdr default) eax-tn))
+ (inst jmp defaulting-done)
+ (trace-table-entry trace-table-normal)))))))
(t
;; 91 bytes for this branch.
(let ((regs-defaulted (gen-label))
- (restore-edi (gen-label))
- (no-stack-args (gen-label))
- (default-stack-vals (gen-label))
- (count-okay (gen-label)))
+ (restore-edi (gen-label))
+ (no-stack-args (gen-label))
+ (default-stack-vals (gen-label))
+ (count-okay (gen-label)))
(note-this-location vop :unknown-return)
;; Branch off to the MV case.
- (inst jmp-short regs-defaulted)
+ (inst jmp :c regs-defaulted)
;; Default the register args, and set up the stack as if we
;; entered the MV return point.
;; Compute a pointer to where to put the [defaulted] stack values.
(emit-label no-stack-args)
(inst lea edi-tn
- (make-ea :dword :base ebp-tn
- :disp (* (- (1+ register-arg-count)) n-word-bytes)))
+ (make-ea :dword :base ebp-tn
+ :disp (frame-byte-offset register-arg-count)))
;; Load EAX with NIL so we can quickly store it, and set up
;; stuff for the loop.
(inst mov eax-tn nil-value)
;; and then default the remaining stack arguments.
(emit-label regs-defaulted)
;; Save EDI.
- (storew edi-tn ebx-tn (- (1+ 1)))
+ (storew edi-tn ebx-tn (frame-word-offset 1))
;; Compute the number of stack arguments, and if it's zero or
;; less, don't copy any stack arguments.
(inst sub ecx-tn (fixnumize register-arg-count))
(inst mov eax-tn ecx-tn)
;; Compute a pointer to where the stack args go.
(inst lea edi-tn
- (make-ea :dword :base ebp-tn
- :disp (* (- (1+ register-arg-count)) n-word-bytes)))
+ (make-ea :dword :base ebp-tn
+ :disp (frame-byte-offset register-arg-count)))
;; Save ESI, and compute a pointer to where the args come from.
- (storew esi-tn ebx-tn (- (1+ 2)))
+ (storew esi-tn ebx-tn (frame-word-offset 2))
(inst lea esi-tn
- (make-ea :dword :base ebx-tn
- :disp (* (- (1+ register-arg-count)) n-word-bytes)))
+ (make-ea :dword :base ebx-tn
+ :disp (frame-byte-offset register-arg-count)))
;; Do the copy.
- (inst shr ecx-tn word-shift) ; make word count
+ (inst shr ecx-tn word-shift) ; make word count
(inst std)
(inst rep)
(inst movs :dword)
;; Restore ESI.
- (loadw esi-tn ebx-tn (- (1+ 2)))
+ (loadw esi-tn ebx-tn (frame-word-offset 2))
;; Now we have to default the remaining args. Find out how many.
(inst sub eax-tn (fixnumize (- nvals register-arg-count)))
(inst neg eax-tn)
;; If none, then just blow out of here.
(inst jmp :le restore-edi)
(inst mov ecx-tn eax-tn)
- (inst shr ecx-tn word-shift) ; word count
+ (inst shr ecx-tn word-shift) ; word count
;; Load EAX with NIL for fast storing.
(inst mov eax-tn nil-value)
;; Do the store.
(inst stos eax-tn)
;; Restore EDI, and reset the stack.
(emit-label restore-edi)
- (loadw edi-tn ebx-tn (- (1+ 1)))
- (inst mov esp-tn ebx-tn))))
+ (loadw edi-tn ebx-tn (frame-word-offset 1))
+ (inst mov esp-tn ebx-tn)
+ (inst cld))))
(values))
\f
;;;; unknown values receiving
(defun receive-unknown-values (args nargs start count)
(declare (type tn args nargs start count))
(let ((variable-values (gen-label))
- (done (gen-label)))
- (inst jmp-short variable-values)
-
- (inst mov start esp-tn)
- (inst push (first *register-arg-tns*))
+ (done (gen-label)))
+ (inst jmp :c variable-values)
+
+ (cond ((location= start (first *register-arg-tns*))
+ (inst push (first *register-arg-tns*))
+ (inst lea start (make-ea :dword :base esp-tn :disp 4)))
+ (t (inst mov start esp-tn)
+ (inst push (first *register-arg-tns*))))
(inst mov count (fixnumize 1))
(inst jmp done)
;;; handles is allocation of the result temporaries.
(define-vop (unknown-values-receiver)
(:temporary (:sc descriptor-reg :offset ebx-offset
- :from :eval :to (:result 0))
- values-start)
+ :from :eval :to (:result 0))
+ values-start)
(:temporary (:sc any-reg :offset ecx-offset
- :from :eval :to (:result 1))
- nvals)
+ :from :eval :to (:result 1))
+ nvals)
(:results (start :scs (any-reg control-stack))
- (count :scs (any-reg control-stack))))
+ (count :scs (any-reg control-stack))))
\f
;;;; local call with unknown values convention return
;;; function.
(define-vop (call-local)
(:args (fp)
- (nfp)
- (args :more t))
+ (nfp)
+ (args :more t))
(:results (values :more t))
(:save-p t)
(:move-args :local-call)
(let ((ret-tn (callee-return-pc-tn callee)))
#+nil
(format t "*call-local ~S; tn-kind ~S; tn-save-tn ~S; its tn-kind ~S~%"
- ret-tn (sb!c::tn-kind ret-tn) (sb!c::tn-save-tn ret-tn)
- (sb!c::tn-kind (sb!c::tn-save-tn ret-tn)))
+ ret-tn (sb!c::tn-kind ret-tn) (sb!c::tn-save-tn ret-tn)
+ (sb!c::tn-kind (sb!c::tn-save-tn ret-tn)))
;; Is the return-pc on the stack or in a register?
(sc-case ret-tn
- ((sap-stack)
- #+nil (format t "*call-local: ret-tn on stack; offset=~S~%"
- (tn-offset ret-tn))
- (storew (make-fixup nil :code-object return)
- ebp-tn (- (1+ (tn-offset ret-tn)))))
- ((sap-reg)
- (inst lea ret-tn (make-fixup nil :code-object return)))))
+ ((sap-stack)
+ #+nil (format t "*call-local: ret-tn on stack; offset=~S~%"
+ (tn-offset ret-tn))
+ (storew (make-fixup nil :code-object return)
+ ebp-tn (frame-word-offset (tn-offset ret-tn))))
+ ((sap-reg)
+ (inst lea ret-tn (make-fixup nil :code-object return)))))
(note-this-location vop :call-site)
(inst jmp target)
;;; glob and the number of values received.
(define-vop (multiple-call-local unknown-values-receiver)
(:args (fp)
- (nfp)
- (args :more t))
+ (nfp)
+ (args :more t))
(:save-p t)
(:move-args :local-call)
(:info save callee target)
(let ((ret-tn (callee-return-pc-tn callee)))
#+nil
(format t "*multiple-call-local ~S; tn-kind ~S; tn-save-tn ~S; its tn-kind ~S~%"
- ret-tn (sb!c::tn-kind ret-tn) (sb!c::tn-save-tn ret-tn)
- (sb!c::tn-kind (sb!c::tn-save-tn ret-tn)))
+ ret-tn (sb!c::tn-kind ret-tn) (sb!c::tn-save-tn ret-tn)
+ (sb!c::tn-kind (sb!c::tn-save-tn ret-tn)))
;; Is the return-pc on the stack or in a register?
(sc-case ret-tn
- ((sap-stack)
- #+nil (format t "*multiple-call-local: ret-tn on stack; offset=~S~%"
- (tn-offset ret-tn))
- ;; Stack
- (storew (make-fixup nil :code-object return)
- ebp-tn (- (1+ (tn-offset ret-tn)))))
- ((sap-reg)
- ;; Register
- (inst lea ret-tn (make-fixup nil :code-object return)))))
+ ((sap-stack)
+ #+nil (format t "*multiple-call-local: ret-tn on stack; offset=~S~%"
+ (tn-offset ret-tn))
+ ;; Stack
+ (storew (make-fixup nil :code-object return)
+ ebp-tn (frame-word-offset (tn-offset ret-tn))))
+ ((sap-reg)
+ ;; Register
+ (inst lea ret-tn (make-fixup nil :code-object return)))))
(note-this-location vop :call-site)
(inst jmp target)
;;; we use MAYBE-LOAD-STACK-TN.
(define-vop (known-call-local)
(:args (fp)
- (nfp)
- (args :more t))
+ (nfp)
+ (args :more t))
(:results (res :more t))
(:move-args :local-call)
(:save-p t)
#+nil
(format t "*known-call-local ~S; tn-kind ~S; tn-save-tn ~S; its tn-kind ~S~%"
- ret-tn (sb!c::tn-kind ret-tn) (sb!c::tn-save-tn ret-tn)
- (sb!c::tn-kind (sb!c::tn-save-tn ret-tn)))
+ ret-tn (sb!c::tn-kind ret-tn) (sb!c::tn-save-tn ret-tn)
+ (sb!c::tn-kind (sb!c::tn-save-tn ret-tn)))
;; Is the return-pc on the stack or in a register?
(sc-case ret-tn
- ((sap-stack)
- #+nil (format t "*known-call-local: ret-tn on stack; offset=~S~%"
- (tn-offset ret-tn))
- ;; Stack
- (storew (make-fixup nil :code-object return)
- ebp-tn (- (1+ (tn-offset ret-tn)))))
- ((sap-reg)
- ;; Register
- (inst lea ret-tn (make-fixup nil :code-object return)))))
+ ((sap-stack)
+ #+nil (format t "*known-call-local: ret-tn on stack; offset=~S~%"
+ (tn-offset ret-tn))
+ ;; Stack
+ (storew (make-fixup nil :code-object return)
+ ebp-tn (frame-word-offset (tn-offset ret-tn))))
+ ((sap-reg)
+ ;; Register
+ (inst lea ret-tn (make-fixup nil :code-object return)))))
(note-this-location vop :call-site)
(inst jmp target)
#+nil
(define-vop (known-return)
(:args (old-fp)
- (return-pc :scs (any-reg immediate-stack) :target rpc)
- (vals :more t))
+ (return-pc :scs (any-reg immediate-stack) :target rpc)
+ (vals :more t))
(:move-args :known-return)
(:info val-locs)
(:temporary (:sc unsigned-reg :from (:argument 1)) rpc)
;;; The return-pc may be in a register or on the stack in any slot.
(define-vop (known-return)
(:args (old-fp)
- (return-pc)
- (vals :more t))
+ (return-pc)
+ (vals :more t))
(:move-args :known-return)
(:info val-locs)
(:ignore val-locs vals)
(trace-table-entry trace-table-fun-epilogue)
#+nil (format t "*known-return: old-fp ~S, tn-kind ~S; ~S ~S~%"
- old-fp (sb!c::tn-kind old-fp) (sb!c::tn-save-tn old-fp)
- (sb!c::tn-kind (sb!c::tn-save-tn old-fp)))
+ old-fp (sb!c::tn-kind old-fp) (sb!c::tn-save-tn old-fp)
+ (sb!c::tn-kind (sb!c::tn-save-tn old-fp)))
#+nil (format t "*known-return: return-pc ~S, tn-kind ~S; ~S ~S~%"
- return-pc (sb!c::tn-kind return-pc)
- (sb!c::tn-save-tn return-pc)
- (sb!c::tn-kind (sb!c::tn-save-tn return-pc)))
+ return-pc (sb!c::tn-kind return-pc)
+ (sb!c::tn-save-tn return-pc)
+ (sb!c::tn-kind (sb!c::tn-save-tn return-pc)))
;; return-pc may be either in a register or on the stack.
(sc-case return-pc
((sap-reg)
(sc-case old-fp
- ((control-stack)
-
- #+nil (format t "*known-return: old-fp ~S on stack; offset=~S~%"
- old-fp (tn-offset old-fp))
-
- (cond ((zerop (tn-offset old-fp))
- ;; Zot all of the stack except for the old-fp.
- (inst lea esp-tn (make-ea :dword :base ebp-tn
- :disp (- (* (1+ ocfp-save-offset)
- n-word-bytes))))
- ;; Restore the old fp from its save location on the stack,
- ;; and zot the stack.
- (inst pop ebp-tn))
-
- (t
- (cerror "Continue any-way"
- "VOP return-local doesn't work if old-fp (in slot %s) is not in slot 0"
- (tn-offset old-fp)))))
-
- ((any-reg descriptor-reg)
- ;; Zot all the stack.
- (move esp-tn ebp-tn)
- ;; Restore the old-fp.
- (move ebp-tn old-fp)))
+ ((control-stack)
+
+ #+nil (format t "*known-return: old-fp ~S on stack; offset=~S~%"
+ old-fp (tn-offset old-fp))
+
+ (cond ((zerop (tn-offset old-fp))
+ ;; Zot all of the stack except for the old-fp.
+ (inst lea esp-tn (make-ea :dword :base ebp-tn
+ :disp (frame-byte-offset ocfp-save-offset)))
+ ;; Restore the old fp from its save location on the stack,
+ ;; and zot the stack.
+ (inst pop ebp-tn))
+
+ (t
+ (cerror "Continue anyway"
+ "VOP return-local doesn't work if old-fp (in slot ~
+ ~S) is not in slot 0"
+ (tn-offset old-fp)))))
+
+ ((any-reg descriptor-reg)
+ ;; Zot all the stack.
+ (move esp-tn ebp-tn)
+ ;; Restore the old-fp.
+ (move ebp-tn old-fp)))
;; Return; return-pc is in a register.
(inst jmp return-pc))
((sap-stack)
#+nil (format t "*known-return: return-pc ~S on stack; offset=~S~%"
- return-pc (tn-offset return-pc))
+ return-pc (tn-offset return-pc))
;; Zot all of the stack except for the old-fp and return-pc.
(inst lea esp-tn
- (make-ea :dword :base ebp-tn
- :disp (- (* (1+ (tn-offset return-pc)) n-word-bytes))))
+ (make-ea :dword :base ebp-tn
+ :disp (frame-byte-offset (tn-offset return-pc))))
;; Restore the old fp. old-fp may be either on the stack in its
;; save location or in a register, in either case this restores it.
(move ebp-tn old-fp)
;;; passed as a more arg, but there is no new-FP, since the arguments
;;; have been set up in the current frame.
(macrolet ((define-full-call (name named return variable)
- (aver (not (and variable (eq return :tail))))
- `(define-vop (,name
- ,@(when (eq return :unknown)
- '(unknown-values-receiver)))
- (:args
- ,@(unless (eq return :tail)
- '((new-fp :scs (any-reg) :to (:argument 1))))
-
- (fun :scs (descriptor-reg control-stack)
- :target eax :to (:argument 0))
-
- ,@(when (eq return :tail)
- '((old-fp)
- (return-pc)))
-
- ,@(unless variable '((args :more t :scs (descriptor-reg)))))
-
- ,@(when (eq return :fixed)
- '((:results (values :more t))))
-
- (:save-p ,(if (eq return :tail) :compute-only t))
-
- ,@(unless (or (eq return :tail) variable)
- '((:move-args :full-call)))
-
- (:vop-var vop)
- (:info
- ,@(unless (or variable (eq return :tail)) '(arg-locs))
- ,@(unless variable '(nargs))
- ,@(when (eq return :fixed) '(nvals)))
-
- (:ignore
- ,@(unless (or variable (eq return :tail)) '(arg-locs))
- ,@(unless variable '(args)))
-
- ;; We pass either the fdefn object (for named call) or
- ;; the actual function object (for unnamed call) in
- ;; EAX. With named call, closure-tramp will replace it
- ;; with the real function and invoke the real function
- ;; for closures. Non-closures do not need this value,
- ;; so don't care what shows up in it.
- (:temporary
- (:sc descriptor-reg
- :offset eax-offset
- :from (:argument 0)
- :to :eval)
- eax)
-
- ;; We pass the number of arguments in ECX.
- (:temporary (:sc unsigned-reg :offset ecx-offset :to :eval) ecx)
-
- ;; With variable call, we have to load the
- ;; register-args out of the (new) stack frame before
- ;; doing the call. Therefore, we have to tell the
- ;; lifetime stuff that we need to use them.
- ,@(when variable
- (mapcar (lambda (name offset)
- `(:temporary (:sc descriptor-reg
- :offset ,offset
- :from (:argument 0)
- :to :eval)
- ,name))
- *register-arg-names* *register-arg-offsets*))
-
- ,@(when (eq return :tail)
- '((:temporary (:sc unsigned-reg
- :from (:argument 1)
- :to (:argument 2))
- old-fp-tmp)))
-
- (:generator ,(+ (if named 5 0)
- (if variable 19 1)
- (if (eq return :tail) 0 10)
- 15
- (if (eq return :unknown) 25 0))
- (trace-table-entry trace-table-call-site)
-
- ;; This has to be done before the frame pointer is
- ;; changed! EAX stores the 'lexical environment' needed
- ;; for closures.
- (move eax fun)
-
-
- ,@(if variable
- ;; For variable call, compute the number of
- ;; arguments and move some of the arguments to
- ;; registers.
- (collect ((noise))
- ;; Compute the number of arguments.
- (noise '(inst mov ecx new-fp))
- (noise '(inst sub ecx esp-tn))
- ;; Move the necessary args to registers,
- ;; this moves them all even if they are
- ;; not all needed.
- (loop
- for name in *register-arg-names*
- for index downfrom -1
- do (noise `(loadw ,name new-fp ,index)))
- (noise))
- '((if (zerop nargs)
- (inst xor ecx ecx)
- (inst mov ecx (fixnumize nargs)))))
- ,@(cond ((eq return :tail)
- '(;; Python has figured out what frame we should
- ;; return to so might as well use that clue.
- ;; This seems really important to the
- ;; implementation of things like
- ;; (without-interrupts ...)
- ;;
- ;; dtc; Could be doing a tail call from a
- ;; known-local-call etc in which the old-fp
- ;; or ret-pc are in regs or in non-standard
- ;; places. If the passing location were
- ;; wired to the stack in standard locations
- ;; then these moves will be un-necessary;
- ;; this is probably best for the x86.
- (sc-case old-fp
- ((control-stack)
- (unless (= ocfp-save-offset
- (tn-offset old-fp))
- ;; FIXME: FORMAT T for stale
- ;; diagnostic output (several of
- ;; them around here), ick
- (format t "** tail-call old-fp not S0~%")
- (move old-fp-tmp old-fp)
- (storew old-fp-tmp
- ebp-tn
- (- (1+ ocfp-save-offset)))))
- ((any-reg descriptor-reg)
- (format t "** tail-call old-fp in reg not S0~%")
- (storew old-fp
- ebp-tn
- (- (1+ ocfp-save-offset)))))
-
- ;; For tail call, we have to push the
- ;; return-pc so that it looks like we CALLed
- ;; despite the fact that we are going to JMP.
- (inst push return-pc)
- ))
- (t
- ;; For non-tail call, we have to save our
- ;; frame pointer and install the new frame
- ;; pointer. We can't load stack tns after this
- ;; point.
- `(;; Python doesn't seem to allocate a frame
- ;; here which doesn't leave room for the
- ;; ofp/ret stuff.
-
- ;; The variable args are on the stack and
- ;; become the frame, but there may be <3
- ;; args and 3 stack slots are assumed
- ;; allocate on the call. So need to ensure
- ;; there are at least 3 slots. This hack
- ;; just adds 3 more.
- ,(if variable
- '(inst sub esp-tn (fixnumize 3)))
-
- ;; Save the fp
- (storew ebp-tn new-fp (- (1+ ocfp-save-offset)))
-
- (move ebp-tn new-fp) ; NB - now on new stack frame.
- )))
-
- (note-this-location vop :call-site)
-
- (inst ,(if (eq return :tail) 'jmp 'call)
- (make-ea :dword :base eax
- :disp ,(if named
- '(- (* fdefn-raw-addr-slot
- n-word-bytes)
- other-pointer-lowtag)
- '(- (* closure-fun-slot n-word-bytes)
- fun-pointer-lowtag))))
- ,@(ecase return
- (:fixed
- '((default-unknown-values vop values nvals)))
- (:unknown
- '((note-this-location vop :unknown-return)
- (receive-unknown-values values-start nvals start count)))
- (:tail))
- (trace-table-entry trace-table-normal)))))
+ (aver (not (and variable (eq return :tail))))
+ `(define-vop (,name
+ ,@(when (eq return :unknown)
+ '(unknown-values-receiver)))
+ (:args
+ ,@(unless (eq return :tail)
+ '((new-fp :scs (any-reg) :to (:argument 1))))
+
+ (fun :scs (descriptor-reg control-stack)
+ :target eax :to (:argument 0))
+
+ ,@(when (eq return :tail)
+ '((old-fp)
+ (return-pc)))
+
+ ,@(unless variable '((args :more t :scs (descriptor-reg)))))
+
+ ,@(when (eq return :fixed)
+ '((:results (values :more t))))
+
+ (:save-p ,(if (eq return :tail) :compute-only t))
+
+ ,@(unless (or (eq return :tail) variable)
+ '((:move-args :full-call)))
+
+ (:vop-var vop)
+ (:info
+ ,@(unless (or variable (eq return :tail)) '(arg-locs))
+ ,@(unless variable '(nargs))
+ ,@(when (eq return :fixed) '(nvals))
+ step-instrumenting)
+
+ (:ignore
+ ,@(unless (or variable (eq return :tail)) '(arg-locs))
+ ,@(unless variable '(args)))
+
+ ;; We pass either the fdefn object (for named call) or
+ ;; the actual function object (for unnamed call) in
+ ;; EAX. With named call, closure-tramp will replace it
+ ;; with the real function and invoke the real function
+ ;; for closures. Non-closures do not need this value,
+ ;; so don't care what shows up in it.
+ (:temporary
+ (:sc descriptor-reg
+ :offset eax-offset
+ :from (:argument 0)
+ :to :eval)
+ eax)
+
+ ;; We pass the number of arguments in ECX.
+ (:temporary (:sc unsigned-reg :offset ecx-offset :to :eval) ecx)
+
+ ;; With variable call, we have to load the
+ ;; register-args out of the (new) stack frame before
+ ;; doing the call. Therefore, we have to tell the
+ ;; lifetime stuff that we need to use them.
+ ,@(when variable
+ (mapcar (lambda (name offset)
+ `(:temporary (:sc descriptor-reg
+ :offset ,offset
+ :from (:argument 0)
+ :to :eval)
+ ,name))
+ *register-arg-names* *register-arg-offsets*))
+
+ ,@(when (eq return :tail)
+ '((:temporary (:sc unsigned-reg
+ :from (:argument 1)
+ :to (:argument 2))
+ old-fp-tmp)))
+
+ (:generator ,(+ (if named 5 0)
+ (if variable 19 1)
+ (if (eq return :tail) 0 10)
+ 15
+ (if (eq return :unknown) 25 0))
+ (trace-table-entry trace-table-call-site)
+
+ ;; This has to be done before the frame pointer is
+ ;; changed! EAX stores the 'lexical environment' needed
+ ;; for closures.
+ (move eax fun)
+
+
+ ,@(if variable
+ ;; For variable call, compute the number of
+ ;; arguments and move some of the arguments to
+ ;; registers.
+ (collect ((noise))
+ ;; Compute the number of arguments.
+ (noise '(inst mov ecx new-fp))
+ (noise '(inst sub ecx esp-tn))
+ ;; Move the necessary args to registers,
+ ;; this moves them all even if they are
+ ;; not all needed.
+ (loop
+ for name in *register-arg-names*
+ for index downfrom -1
+ do (noise `(loadw ,name new-fp ,index)))
+ (noise))
+ '((if (zerop nargs)
+ (inst xor ecx ecx)
+ (inst mov ecx (fixnumize nargs)))))
+ ,@(cond ((eq return :tail)
+ '(;; Python has figured out what frame we should
+ ;; return to so might as well use that clue.
+ ;; This seems really important to the
+ ;; implementation of things like
+ ;; (without-interrupts ...)
+ ;;
+ ;; dtc; Could be doing a tail call from a
+ ;; known-local-call etc in which the old-fp
+ ;; or ret-pc are in regs or in non-standard
+ ;; places. If the passing location were
+ ;; wired to the stack in standard locations
+ ;; then these moves will be un-necessary;
+ ;; this is probably best for the x86.
+ (sc-case old-fp
+ ((control-stack)
+ (unless (= ocfp-save-offset
+ (tn-offset old-fp))
+ ;; FIXME: FORMAT T for stale
+ ;; diagnostic output (several of
+ ;; them around here), ick
+ (format t "** tail-call old-fp not S0~%")
+ (move old-fp-tmp old-fp)
+ (storew old-fp-tmp
+ ebp-tn
+ (frame-word-offset ocfp-save-offset))))
+ ((any-reg descriptor-reg)
+ (format t "** tail-call old-fp in reg not S0~%")
+ (storew old-fp
+ ebp-tn
+ (frame-word-offset ocfp-save-offset))))
+
+ ;; For tail call, we have to push the
+ ;; return-pc so that it looks like we CALLed
+ ;; despite the fact that we are going to JMP.
+ (inst push return-pc)
+ ))
+ (t
+ ;; For non-tail call, we have to save our
+ ;; frame pointer and install the new frame
+ ;; pointer. We can't load stack tns after this
+ ;; point.
+ `(;; Python doesn't seem to allocate a frame
+ ;; here which doesn't leave room for the
+ ;; ofp/ret stuff.
+
+ ;; The variable args are on the stack and
+ ;; become the frame, but there may be <3
+ ;; args and 3 stack slots are assumed
+ ;; allocate on the call. So need to ensure
+ ;; there are at least 3 slots. This hack
+ ;; just adds 3 more.
+ ,(if variable
+ '(inst sub esp-tn (fixnumize 3)))
+
+ ;; Save the fp
+ (storew ebp-tn new-fp (frame-word-offset ocfp-save-offset))
+
+ (move ebp-tn new-fp) ; NB - now on new stack frame.
+ )))
+
+ (when step-instrumenting
+ (emit-single-step-test)
+ (inst jmp :eq DONE)
+ (inst break single-step-around-trap))
+ DONE
+
+ (note-this-location vop :call-site)
+
+ (inst ,(if (eq return :tail) 'jmp 'call)
+ ,(if named
+ '(make-ea-for-object-slot eax fdefn-raw-addr-slot
+ other-pointer-lowtag)
+ '(make-ea-for-object-slot eax closure-fun-slot
+ fun-pointer-lowtag)))
+ ,@(ecase return
+ (:fixed
+ '((default-unknown-values vop values nvals)))
+ (:unknown
+ '((note-this-location vop :unknown-return)
+ (receive-unknown-values values-start nvals start count)))
+ (:tail))
+ (trace-table-entry trace-table-normal)))))
(define-full-call call nil :fixed nil)
(define-full-call call-named t :fixed nil)
;;; routine. We just set things up so that it can find what it needs.
(define-vop (tail-call-variable)
(:args (args :scs (any-reg control-stack) :target esi)
- (function :scs (descriptor-reg control-stack) :target eax)
- (old-fp)
- (ret-addr))
+ (function :scs (descriptor-reg control-stack) :target eax)
+ (old-fp)
+ (ret-addr))
(:temporary (:sc unsigned-reg :offset esi-offset :from (:argument 0)) esi)
(:temporary (:sc unsigned-reg :offset eax-offset :from (:argument 1)) eax)
; (:ignore ret-addr old-fp)
;; The following assumes that the return-pc and old-fp are on the
;; stack in their standard save locations - Check this.
(unless (and (sc-is old-fp control-stack)
- (= (tn-offset old-fp) ocfp-save-offset))
- (error "tail-call-variable: ocfp not on stack in standard save location?"))
+ (= (tn-offset old-fp) ocfp-save-offset))
+ (error "tail-call-variable: ocfp not on stack in standard save location?"))
(unless (and (sc-is ret-addr sap-stack)
- (= (tn-offset ret-addr) return-pc-save-offset))
- (error "tail-call-variable: ret-addr not on stack in standard save location?"))
+ (= (tn-offset ret-addr) return-pc-save-offset))
+ (error "tail-call-variable: ret-addr not on stack in standard save location?"))
;; And jump to the assembly routine.
;;;
;;; pfw--get wired-tn conflicts sometimes if register sc specd for args
;;; having problems targeting args to regs -- using temps instead.
+;;;
+;;; First off, modifying the return-pc defeats the branch-prediction
+;;; optimizations on modern CPUs quite handily. Second, we can do all
+;;; this without needing a temp register. Fixed the latter, at least.
+;;; -- AB 2006/Feb/04
(define-vop (return-single)
(:args (old-fp)
- (return-pc)
- (value))
- (:temporary (:sc unsigned-reg) ofp)
- (:temporary (:sc unsigned-reg) ret)
+ (return-pc)
+ (value))
(:ignore value)
(:generator 6
(trace-table-entry trace-table-fun-epilogue)
- (move ret return-pc)
- ;; Clear the control stack
- (move ofp old-fp)
- ;; Adjust the return address for the single value return.
- (inst add ret 2)
- ;; Restore the frame pointer.
- (move esp-tn ebp-tn)
- (move ebp-tn ofp)
- ;; Out of here.
- (inst jmp ret)))
+ ;; Code structure lifted from known-return.
+ (sc-case return-pc
+ ((sap-reg)
+ ;; return PC in register for some reason (local call?)
+ ;; we jmp to the return pc after fixing the stack and frame.
+ (sc-case old-fp
+ ((control-stack)
+ ;; ofp on stack must be in slot 0 (the traditional storage place).
+ ;; Drop the stack above it and pop it off.
+ (cond ((zerop (tn-offset old-fp))
+ (inst lea esp-tn (make-ea :dword :base ebp-tn
+ :disp (frame-byte-offset ocfp-save-offset)))
+ (inst pop ebp-tn))
+ (t
+ ;; Should this ever happen, we do the same as above, but
+ ;; using (tn-offset old-fp) instead of ocfp-save-offset
+ ;; (which is 0 anyway, see src/compiler/x86/vm.lisp) and
+ ;; then lea esp again against itself with a displacement
+ ;; of (* (tn-offset old-fp) n-word-bytes) to clear the
+ ;; rest of the stack.
+ (cerror "Continue anyway"
+ "VOP return-single doesn't work if old-fp (in slot ~S) is not in slot 0" (tn-offset old-fp)))))
+ ((any-reg descriptor-reg)
+ ;; ofp in reg, drop the stack and load the real fp.
+ (move esp-tn ebp-tn)
+ (move ebp-tn old-fp)))
+
+ ;; Set single-value-return flag
+ (inst clc)
+ ;; And return
+ (inst jmp return-pc))
+
+ ((sap-stack)
+ ;; Note that this will only work right if, when old-fp is on
+ ;; the stack, it has a lower tn-offset than return-pc. One of
+ ;; the comments in known-return indicate that this is the case
+ ;; (in that it will be in its save location), but we may wish
+ ;; to assert that (in either the weaker or stronger forms).
+ ;; Should this ever not be the case, we should load old-fp
+ ;; into a temp reg while we fix the stack.
+ ;; Drop stack above return-pc
+ (inst lea esp-tn (make-ea :dword :base ebp-tn
+ :disp (frame-byte-offset (tn-offset return-pc))))
+ ;; Set single-value return flag
+ (inst clc)
+ ;; Restore the old frame pointer
+ (move ebp-tn old-fp)
+ ;; And return, dropping the rest of the stack as we go.
+ (inst ret (* (tn-offset return-pc) n-word-bytes))))))
;;; Do unknown-values return of a fixed (other than 1) number of
;;; values. The VALUES are required to be set up in the standard
;;; the values, and jump directly to return-pc.
(define-vop (return)
(:args (old-fp)
- (return-pc :to (:eval 1))
- (values :more t))
+ (return-pc :to (:eval 1))
+ (values :more t))
(:ignore values)
(:info nvals)
;; registers so that we can default the argument registers without
;; trashing return-pc.
(:temporary (:sc unsigned-reg :offset (first *register-arg-offsets*)
- :from :eval) a0)
+ :from :eval) a0)
(:temporary (:sc unsigned-reg :offset (second *register-arg-offsets*)
- :from :eval) a1)
+ :from :eval) a1)
(:temporary (:sc unsigned-reg :offset (third *register-arg-offsets*)
- :from :eval) a2)
+ :from :eval) a2)
(:generator 6
(trace-table-entry trace-table-fun-epilogue)
;; Establish the values pointer and values count.
(move ebx ebp-tn)
(if (zerop nvals)
- (inst xor ecx ecx) ; smaller
+ (inst xor ecx ecx) ; smaller
(inst mov ecx (fixnumize nvals)))
;; Restore the frame pointer.
(move ebp-tn old-fp)
;; Clear as much of the stack as possible, but not past the return
;; address.
(inst lea esp-tn (make-ea :dword :base ebx
- :disp (- (* (max nvals 2) n-word-bytes))))
+ :disp (- (* (max nvals 2) n-word-bytes))))
;; Pre-default any argument register that need it.
(when (< nvals register-arg-count)
(let* ((arg-tns (nthcdr nvals (list a0 a1 a2)))
- (first (first arg-tns)))
- (inst mov first nil-value)
- (dolist (tn (cdr arg-tns))
- (inst mov tn first))))
+ (first (first arg-tns)))
+ (inst mov first nil-value)
+ (dolist (tn (cdr arg-tns))
+ (inst mov tn first))))
+ ;; Set multi-value return flag.
+ (inst stc)
;; And away we go. Except that return-pc is still on the
;; stack and we've changed the stack pointer. So we have to
;; tell it to index off of EBX instead of EBP.
(cond ((zerop nvals)
- ;; Return popping the return address and the OCFP.
- (inst ret n-word-bytes))
- ((= nvals 1)
- ;; Return popping the return, leaving 1 slot. Can this
- ;; happen, or is a single value return handled elsewhere?
- (inst ret))
- (t
- (inst jmp (make-ea :dword :base ebx
- :disp (- (* (1+ (tn-offset return-pc))
- n-word-bytes))))))
+ ;; Return popping the return address and the OCFP.
+ (inst ret n-word-bytes))
+ ((= nvals 1)
+ ;; Return popping the return, leaving 1 slot. Can this
+ ;; happen, or is a single value return handled elsewhere?
+ (inst ret))
+ (t
+ (inst jmp (make-ea :dword :base ebx
+ :disp (frame-byte-offset (tn-offset return-pc))))))
(trace-table-entry trace-table-normal)))
;;; ESI -- pointer to where to find the values.
(define-vop (return-multiple)
(:args (old-fp :to (:eval 1) :target old-fp-temp)
- (return-pc :target eax)
- (vals :scs (any-reg) :target esi)
- (nvals :scs (any-reg) :target ecx))
+ (return-pc :target eax)
+ (vals :scs (any-reg) :target esi)
+ (nvals :scs (any-reg) :target ecx))
(:temporary (:sc unsigned-reg :offset eax-offset :from (:argument 1)) eax)
(:temporary (:sc unsigned-reg :offset esi-offset :from (:argument 2)) esi)
(:temporary (:sc unsigned-reg :offset ecx-offset :from (:argument 3)) ecx)
(:temporary (:sc unsigned-reg :offset ebx-offset :from (:eval 0)) ebx)
(:temporary (:sc descriptor-reg :offset (first *register-arg-offsets*)
- :from (:eval 0)) a0)
+ :from (:eval 0)) a0)
(:temporary (:sc unsigned-reg :from (:eval 1)) old-fp-temp)
(:node-var node)
(unless (policy node (> space speed))
;; Check for the single case.
(let ((not-single (gen-label)))
- (inst cmp nvals (fixnumize 1))
- (inst jmp :ne not-single)
-
- ;; Return with one value.
- (loadw a0 vals -1)
- ;; Clear the stack. We load old-fp into a register before clearing
- ;; the stack.
- (move old-fp-temp old-fp)
- (move esp-tn ebp-tn)
- (move ebp-tn old-fp-temp)
- ;; Fix the return-pc to point at the single-value entry point.
- (inst add eax 2)
- ;; Out of here.
- (inst jmp eax)
-
- ;; Nope, not the single case. Jump to the assembly routine.
- (emit-label not-single)))
+ (inst cmp nvals (fixnumize 1))
+ (inst jmp :ne not-single)
+
+ ;; Return with one value.
+ (loadw a0 vals -1)
+ ;; Clear the stack. We load old-fp into a register before clearing
+ ;; the stack.
+ (move old-fp-temp old-fp)
+ (move esp-tn ebp-tn)
+ (move ebp-tn old-fp-temp)
+ ;; Set the single-value return flag.
+ (inst clc)
+ ;; Out of here.
+ (inst jmp eax)
+
+ ;; Nope, not the single case. Jump to the assembly routine.
+ (emit-label not-single)))
(move esi vals)
(move ecx nvals)
(move ebx ebp-tn)
(:generator 20
;; Avoid the copy if there are no more args.
(cond ((zerop fixed)
- (inst jecxz just-alloc-frame))
- (t
- (inst cmp ecx-tn (fixnumize fixed))
- (inst jmp :be just-alloc-frame)))
+ (inst jecxz just-alloc-frame))
+ (t
+ (inst cmp ecx-tn (fixnumize fixed))
+ (inst jmp :be just-alloc-frame)))
;; Allocate the space on the stack.
;; stack = ebp - (max 3 frame-size) - (nargs - fixed)
(inst lea ebx-tn
- (make-ea :dword :base ebp-tn
- :disp (- (fixnumize fixed)
- (* n-word-bytes
- (max 3 (sb-allocated-size 'stack))))))
+ (make-ea :dword :base ebp-tn
+ :disp (- (fixnumize fixed)
+ (* n-word-bytes
+ (max 3 (sb-allocated-size 'stack))))))
(inst sub ebx-tn ecx-tn) ; Got the new stack in ebx
(inst mov esp-tn ebx-tn)
(inst mov ebx-tn ecx-tn)
(cond ((< fixed register-arg-count)
- ;; We must stop when we run out of stack args, not when we
- ;; run out of more args.
- ;; Number to copy = nargs-3
- (inst sub ecx-tn (fixnumize register-arg-count))
- ;; Everything of interest in registers.
- (inst jmp :be do-regs))
- (t
- ;; Number to copy = nargs-fixed
- (inst sub ecx-tn (fixnumize fixed))))
+ ;; We must stop when we run out of stack args, not when we
+ ;; run out of more args.
+ ;; Number to copy = nargs-3
+ (inst sub ecx-tn (fixnumize register-arg-count))
+ ;; Everything of interest in registers.
+ (inst jmp :be do-regs))
+ (t
+ ;; Number to copy = nargs-fixed
+ (inst sub ecx-tn (fixnumize fixed))))
;; Save edi and esi register args.
(inst push edi-tn)
(inst push esi-tn)
+ (inst push ebx-tn)
;; Okay, we have pushed the register args. We can trash them
;; now.
- ;; Initialize dst to be end of stack; skiping the values pushed
- ;; above.
- (inst lea edi-tn (make-ea :dword :base esp-tn :disp 8))
-
;; Initialize src to be end of args.
(inst mov esi-tn ebp-tn)
(inst sub esi-tn ebx-tn)
- (inst shr ecx-tn word-shift) ; make word count
- ;; And copy the args.
- (inst cld) ; auto-inc ESI and EDI.
- (inst rep)
- (inst movs :dword)
+ ;; We need to copy from downwards up to avoid overwriting some of
+ ;; the yet uncopied args. So we need to use EBX as the copy index
+ ;; and ECX as the loop counter, rather than using ECX for both.
+ (inst xor ebx-tn ebx-tn)
+
+ ;; We used to use REP MOVS here, but on modern x86 it performs
+ ;; much worse than an explicit loop for small blocks.
+ COPY-LOOP
+ (inst mov edi-tn (make-ea :dword :base esi-tn :index ebx-tn))
+ ;; The :DISP is to account for the registers saved on the stack
+ (inst mov (make-ea :dword :base esp-tn :disp (* 3 n-word-bytes)
+ :index ebx-tn)
+ edi-tn)
+ (inst add ebx-tn n-word-bytes)
+ (inst sub ecx-tn n-word-bytes)
+ (inst jmp :nz COPY-LOOP)
;; So now we need to restore EDI and ESI.
+ (inst pop ebx-tn)
(inst pop esi-tn)
(inst pop edi-tn)
;; Here: nargs>=1 && nargs>fixed
(when (< fixed register-arg-count)
- ;; Now we have to deposit any more args that showed up in
- ;; registers.
- (do ((i fixed))
- ( nil )
- ;; Store it relative to ebp
- (inst mov (make-ea :dword :base ebp-tn
- :disp (- (* 4
- (+ 1 (- i fixed)
- (max 3 (sb-allocated-size 'stack))))))
- (nth i *register-arg-tns*))
-
- (incf i)
- (when (>= i register-arg-count)
- (return))
-
- ;; Don't deposit any more than there are.
- (if (zerop i)
- (inst test ecx-tn ecx-tn)
- (inst cmp ecx-tn (fixnumize i)))
- (inst jmp :eq done)))
+ ;; Now we have to deposit any more args that showed up in
+ ;; registers.
+ (do ((i fixed))
+ ( nil )
+ ;; Store it relative to ebp
+ (inst mov (make-ea :dword :base ebp-tn
+ :disp (- (* 4
+ (+ 1 (- i fixed)
+ (max 3 (sb-allocated-size 'stack))))))
+ (nth i *register-arg-tns*))
+
+ (incf i)
+ (when (>= i register-arg-count)
+ (return))
+
+ ;; Don't deposit any more than there are.
+ (if (zerop i)
+ (inst test ecx-tn ecx-tn)
+ (inst cmp ecx-tn (fixnumize i)))
+ (inst jmp :eq done)))
(inst jmp done)
JUST-ALLOC-FRAME
(inst lea esp-tn
- (make-ea :dword :base ebp-tn
- :disp (- (* n-word-bytes
- (max 3 (sb-allocated-size 'stack))))))
+ (make-ea :dword :base ebp-tn
+ :disp (- (* n-word-bytes
+ (max 3 (sb-allocated-size 'stack))))))
DONE))
-;;; &MORE args are stored contiguously on the stack, starting
-;;; immediately at the context pointer. The context pointer is not
-;;; typed, so the lowtag is 0.
-(define-vop (more-arg)
- (:translate %more-arg)
+(define-vop (more-kw-arg)
+ (:translate sb!c::%more-kw-arg)
(:policy :fast-safe)
- (:args (object :scs (descriptor-reg) :to :result)
- (index :scs (any-reg) :target temp))
+ (:args (object :scs (descriptor-reg) :to (:result 1))
+ (index :scs (any-reg immediate) :to (:result 1) :target keyword))
(:arg-types * tagged-num)
- (:temporary (:sc unsigned-reg :from (:argument 1) :to :result) temp)
- (:results (value :scs (any-reg descriptor-reg)))
- (:result-types *)
- (:generator 5
- (move temp index)
- (inst neg temp)
- (inst mov value (make-ea :dword :base object :index temp))))
+ (:results (value :scs (descriptor-reg any-reg))
+ (keyword :scs (descriptor-reg any-reg)))
+ (:result-types * *)
+ (:generator 4
+ (sc-case index
+ (immediate
+ (inst mov value (make-ea :dword :base object :disp (tn-value index)))
+ (inst mov keyword (make-ea :dword :base object
+ :disp (+ (tn-value index) n-word-bytes))))
+ (t
+ (inst mov value (make-ea :dword :base object :index index))
+ (inst mov keyword (make-ea :dword :base object :index index
+ :disp n-word-bytes))))))
-(define-vop (more-arg-c)
- (:translate %more-arg)
+(define-vop (more-arg)
+ (:translate sb!c::%more-arg)
(:policy :fast-safe)
- (:args (object :scs (descriptor-reg)))
- (:info index)
- (:arg-types * (:constant (signed-byte 30)))
- (:results (value :scs (any-reg descriptor-reg)))
+ (:args (object :scs (descriptor-reg) :to (:result 1))
+ (index :scs (any-reg) :to (:result 1) :target value))
+ (:arg-types * tagged-num)
+ (:results (value :scs (descriptor-reg any-reg)))
(:result-types *)
(:generator 4
- (inst mov value
- (make-ea :dword :base object :disp (- (* index n-word-bytes))))))
-
+ (move value index)
+ (inst neg value)
+ (inst mov value (make-ea :dword :base object :index value))))
;;; Turn more arg (context, count) into a list.
+(defoptimizer (%listify-rest-args stack-allocate-result) ((&rest args))
+ t)
+
(define-vop (listify-rest-args)
(:translate %listify-rest-args)
(:policy :safe)
(:args (context :scs (descriptor-reg) :target src)
- (count :scs (any-reg) :target ecx))
+ (count :scs (any-reg) :target ecx))
(:arg-types * tagged-num)
(:temporary (:sc unsigned-reg :offset esi-offset :from (:argument 0)) src)
(:temporary (:sc unsigned-reg :offset ecx-offset :from (:argument 1)) ecx)
(:node-var node)
(:generator 20
(let ((enter (gen-label))
- (loop (gen-label))
- (done (gen-label)))
+ (loop (gen-label))
+ (done (gen-label))
+ (stack-allocate-p (node-stack-allocate-p node)))
(move src context)
(move ecx count)
;; Check to see whether there are no args, and just return NIL if so.
(inst mov result nil-value)
(inst jecxz done)
- (inst lea dst (make-ea :dword :index ecx :scale 2))
- (pseudo-atomic
- (allocation dst dst node)
+ (inst lea dst (make-ea :dword :base ecx :index ecx))
+ (maybe-pseudo-atomic stack-allocate-p
+ (allocation dst dst node stack-allocate-p)
(inst lea dst (make-ea :byte :base dst :disp list-pointer-lowtag))
- ;; Convert the count into a raw value, so that we can use the
- ;; LOOP instruction.
(inst shr ecx 2)
;; Set decrement mode (successive args at lower addresses)
(inst std)
(inst lods eax)
(storew eax dst 0 list-pointer-lowtag)
;; Go back for more.
- (inst loop loop)
+ (inst sub ecx 1)
+ (inst jmp :nz loop)
;; NIL out the last cons.
- (storew nil-value dst 1 list-pointer-lowtag))
+ (storew nil-value dst 1 list-pointer-lowtag)
+ (inst cld))
(emit-label done))))
;;; Return the location and size of the &MORE arg glob created by
(:arg-types positive-fixnum (:constant fixnum))
(:info fixed)
(:results (context :scs (descriptor-reg))
- (count :scs (any-reg)))
+ (count :scs (any-reg)))
(:result-types t tagged-num)
(:note "more-arg-context")
(:generator 5
;; SP at this point points at the last arg pushed.
;; Point to the first more-arg, not above it.
(inst lea context (make-ea :dword :base esp-tn
- :index count :scale 1
- :disp (- (+ (fixnumize fixed) 4))))
+ :index count :scale 1
+ :disp (- (+ (fixnumize fixed) 4))))
(unless (zerop fixed)
(inst sub count (fixnumize fixed)))))
(:save-p :compute-only)
(:generator 3
(let ((err-lab
- (generate-error-code vop invalid-arg-count-error nargs)))
+ (generate-error-code vop invalid-arg-count-error nargs)))
(if (zerop count)
- (inst test nargs nargs) ; smaller instruction
- (inst cmp nargs (fixnumize count)))
+ (inst test nargs nargs) ; smaller instruction
+ (inst cmp nargs (fixnumize count)))
(inst jmp :ne err-lab))))
;;; Various other error signallers.
(macrolet ((def (name error translate &rest args)
- `(define-vop (,name)
- ,@(when translate
- `((:policy :fast-safe)
- (:translate ,translate)))
- (:args ,@(mapcar (lambda (arg)
- `(,arg :scs (any-reg descriptor-reg)))
- args))
- (:vop-var vop)
- (:save-p :compute-only)
- (:generator 1000
- (error-call vop ,error ,@args)))))
+ `(define-vop (,name)
+ ,@(when translate
+ `((:policy :fast-safe)
+ (:translate ,translate)))
+ (:args ,@(mapcar (lambda (arg)
+ `(,arg :scs (any-reg descriptor-reg)))
+ args))
+ (:vop-var vop)
+ (:save-p :compute-only)
+ (:generator 1000
+ (error-call vop ,error ,@args)))))
(def arg-count-error invalid-arg-count-error
sb!c::%arg-count-error nargs)
(def type-check-error object-not-type-error sb!c::%type-check-error
(def unknown-key-arg-error unknown-key-arg-error
sb!c::%unknown-key-arg-error key)
(def nil-fun-returned-error nil-fun-returned-error nil fun))
+
+;;; Single-stepping
+
+(defun emit-single-step-test ()
+ ;; We use different ways of representing whether stepping is on on
+ ;; +SB-THREAD / -SB-THREAD: on +SB-THREAD, we use a slot in the
+ ;; thread structure. On -SB-THREAD we use the value of a static
+ ;; symbol. Things are done this way, since reading a thread-local
+ ;; slot from a symbol would require an extra register on +SB-THREAD,
+ ;; and reading a slot from a thread structure would require an extra
+ ;; register on -SB-THREAD.
+ #!+sb-thread
+ (progn
+ (inst fs-segment-prefix)
+ (inst cmp (make-ea :dword
+ :disp (* thread-stepping-slot n-word-bytes))
+ nil-value))
+ #!-sb-thread
+ (inst cmp (make-ea-for-symbol-value sb!impl::*stepping*)
+ nil-value))
+
+(define-vop (step-instrument-before-vop)
+ (:policy :fast-safe)
+ (:vop-var vop)
+ (:generator 3
+ (emit-single-step-test)
+ (inst jmp :eq DONE)
+ (inst break single-step-before-trap)
+ DONE
+ (note-this-location vop :step-before-vop)))