X-Git-Url: http://repo.macrolet.net/gitweb/?a=blobdiff_plain;f=base-target-features.lisp-expr;h=e469fdaa90d5ff0811288362de5b57ccb0d9a3e6;hb=HEAD;hp=d6fa9a156de622ee3a9bc05d4272648425336961;hpb=bf6093e08c8375f9f3ec09f50af343b3e9520c4a;p=sbcl.git diff --git a/base-target-features.lisp-expr b/base-target-features.lisp-expr index d6fa9a1..e469fda 100644 --- a/base-target-features.lisp-expr +++ b/base-target-features.lisp-expr @@ -1,3 +1,5 @@ +;;;; -*- Lisp -*- + ;;;; tags which are set during the build process and which end up in ;;;; CL:*FEATURES* in the target SBCL, plus some comments about other ;;;; CL:*FEATURES* tags which have special meaning to SBCL or which @@ -5,13 +7,16 @@ ;;;; ;;;; Note that the recommended way to customize the features of a ;;;; local build of SBCL is not to edit this file, but instead to -;;;; tweak customize-target-features.lisp. If you define a function -;;;; in customize-target-features.lisp, it will be used to transform -;;;; the target features list after it's read and before it's used. -;;;; E.g. you can use code like this: +;;;; tweak customize-target-features.lisp. (You must create this file +;;;; first; it is not in the SBCL distribution, and is in fact +;;;; explicitly excluded from the distribution in places like +;;;; .cvsignore.) If you define a function in +;;;; customize-target-features.lisp, it will be used to transform the +;;;; target features list after it's read and before it's used. E.g., +;;;; you can use code like this: ;;;; (lambda (list) ;;;; (flet ((enable (x) (pushnew x list)) -;;;; (disable (x) (setf list (remove x list)))) +;;;; (disable (x) (setf list (remove x list)))) ;;;; #+nil (enable :sb-show) ;;;; (enable :sb-after-xc-core) ;;;; #+nil (disable :sb-doc) @@ -40,21 +45,17 @@ ;; our standard :ansi-cl :common-lisp ;; FIXME: Isn't there a :x3jsomething feature which we should set too? + ;; No. CLHS says ":x3j13 [...] A conforming implementation might or + ;; might not contain such a feature." -- CSR, 2002-02-21 ;; our dialect :sbcl ;; Douglas Thomas Crosher's conservative generational GC (the only one - ;; we currently support for X86) - :gencgc - - ;; We're running under a UNIX. This is sort of redundant, and it was also - ;; sort of redundant under CMU CL, which we inherited it from: neither SBCL - ;; nor CMU CL supports anything but UNIX (and "technically not UNIX"es - ;; such as *BSD and Linux). But someday, maybe we might, and in that case - ;; we'd presumably remove this, so its presence conveys the information - ;; that the system isn't one which follows such a change. - :unix + ;; we currently support for X86). + ;; :gencgc used to be here; CSR moved it into + ;; local-target-features.lisp-expr via make-config.sh, as alpha, + ;; sparc and ppc ports don't currently support it. -- CSR, 2002-02-21 ;; ;; features present in this particular build @@ -69,10 +70,11 @@ ;; the executable I'm running. :sb-doc - ;; Do regression and other tests when building the system. You - ;; might or might not want this if you're not a developer, - ;; depending on how paranoid you are. You probably do want it if - ;; you are a developer. + ;; Do regression and other tests when building the system. You might + ;; or might not want this if you're not a developer, depending on how + ;; paranoid you are. You probably do want it if you are a developer. + ;; This test does not affect the target system (in much the same way + ;; as :sb-after-xc-core, below). :sb-test ;; Make more debugging information available (for debugging SBCL @@ -100,16 +102,19 @@ ;; readtable configured so that the system sources can be read. ; :sb-show - ;; Build SBCL with the old CMU CL low level debugger, "ldb". If - ;; are aren't messing with CMU CL at a very low level (e.g. - ;; trying to diagnose GC problems) you shouldn't need this. - ; :sb-ldb + ;; Build SBCL with the old CMU CL low level debugger, "ldb". In the + ;; ideal world you would not need this unless you are messing with + ;; SBCL at a very low level (e.g., trying to diagnose GC problems, or + ;; trying to debug assembly code for a port to a new CPU). However, + ;; experience shows that sooner or later everyone lose()'s, in which + ;; case SB-LDB can at least provide an informative backtrace. + :sb-ldb ;; This isn't really a target Lisp feature at all, but controls ;; whether the build process produces an after-xc.core file. This - ;; can be useful for shortening the edit/compile/debug cycle if - ;; you're messing around with low-level internals of the system, - ;; as in slam.sh. Otherwise you don't need it. + ;; can be useful for shortening the edit/compile/debug cycle when + ;; you modify SBCL's own source code, as in slam.sh. Otherwise + ;; you don't need it. ; :sb-after-xc-core ;; Enable extra debugging output in the assem.lisp assembler/scheduler @@ -117,6 +122,12 @@ ;; original CMU CL code.) ; :sb-show-assem + ;; Compile the C runtime with support for low-level debugging output + ;; through FSHOW and FSHOW_SIGNAL. If enabled, this feature allows + ;; users to turn on such debugging output using environment variables at + ;; run-time. + ; :sb-qshow + ;; Setting this makes SBCL more "fluid", i.e. more amenable to ;; modification at runtime, by suppressing various INLINE declarations, ;; compiler macro definitions, FREEZE-TYPE declarations; and by @@ -133,38 +144,149 @@ ;; anyone who wants to collect such statistics in the future. ; :sb-dyncount - ;; Peter Van Eynde's increase-bulletproofness code + ;; Enable code for detecting concurrent accesses to the same hash-table + ;; in multiple threads. Note that this implementation is currently + ;; (2007-09-11) somewhat too eager: even though in the current implementation + ;; multiple readers are thread safe as long as there are no writers, this + ;; code will also trap multiple readers. + ; :sb-hash-table-debug + + ;; Enabled automatically by make-config.sh for platforms which implement + ;; short vector SIMD intrinsics. + ;; + ; :sb-simd-pack + + ;; Enabled automatically by make-config.sh for platforms which implement + ;; the %READ-CYCLE-COUNTER VOP. Can be disabled manually: affects TIME. ;; - ;; This is not maintained or tested in current SBCL, but I haven't - ;; gone out of my way to remove or break it, either. + ;; FIXME: Should this be :SB-CYCLE-COUNTER instead? If so, then the same goes + ;; for :COMPARE-AND-SWAP-VOPS as well, and a bunch of others. Perhaps + ;; built-time convenience features like this should all live in eg. SB!INT + ;; instead? + ;; + ; :cycle-counter + + ;; Enabled automatically for platforms which implement complex arithmetic + ;; VOPs. Such platforms should implement real-complex, complex-real and + ;; complex-complex addition and subtractions (for complex-single-float + ;; and complex-double-float). They should also also implement complex-real + ;; and real-complex multiplication, complex-real division, and + ;; sb!vm::swap-complex, which swaps the real and imaginary parts. + ;; Finally, they should implement conjugate and complex-real, real-complex + ;; and complex-complex CL:= (complex-complex EQL would usually be a good + ;; idea). + ;; + ; :complex-float-vops + + ;; Enabled automatically for platforms which implement VOPs for EQL + ;; of single and double floats. + ;; + ; :float-eql-vops + + ;; Enabled automatically for platform that can implement inline constants. + ;; + ;; Such platform must implement 5 functions, in SB!VM: + ;; * canonicalize-inline-constant: converts a constant descriptor (list) into + ;; a canonical description, to be used as a key in an EQUAL hash table + ;; and to guide the generation of the constant itself. + ;; * inline-constant-value: given a canonical constant descriptor, computes + ;; two values: + ;; 1. A label that will be used to emit the constant (usually a + ;; sb!assem:label) + ;; 2. A value that will be returned to code generators referring to + ;; the constant (on x86oids, an EA object) + ;; * sort-inline-constants: Receives a vector of unique constants; + ;; the car of each entry is the constant descriptor, and the cdr the + ;; corresponding label. Destructively returns a vector of constants + ;; sorted in emission order. It could actually perform arbitrary + ;; modifications to the vector, e.g. to fuse constants of different + ;; size. + ;; * emit-constant-segment-header: receives the vector of sorted constants + ;; and a flag (true iff speed > space). Expected to emit padding + ;; of some sort between the ELSEWHERE segment and the constants, or some + ;; metadata. + ;; * emit-inline-constant: receives a constant descriptor and its associated + ;; label. Emits the constant. + ;; + ;; Implementing this features lets VOP generators use sb!c:register-inline-constant + ;; to get handles (as returned by sb!vm:inline-constant-value) from constant + ;; descriptors. + ;; + ; :inline-constants + + ;; Peter Van Eynde's increase-bulletproofness code for CMU CL + ;; + ;; Some of the code which was #+high-security before the fork has now + ;; been either made unconditional, deleted, or rewritten into + ;; unrecognizability, but some remains. What remains is not maintained + ;; or tested in current SBCL, but I haven't gone out of my way to + ;; break it, either. ;; ; :high-security ; :high-security-support - ;; multiprocessing support - ;; - ;; This is not maintained or tested in current SBCL. I haven't gone out - ;; of my way to break it, but since it's derived from an old version of - ;; CMU CL where multiprocessing was pretty shaky, it's likely to be very - ;; flaky now. - ;; :MP enables multiprocessing - ;; :MP-I486 is used, only within the multiprocessing code, to control - ;; what seems to control processor-version-specific code. It's - ;; probably for 486 or later, i.e. could be set as long as - ;; you know you're not running on a 386, but it doesn't seem - ;; to be documented anywhere, so that's just a guess. - ; :mp - ; :mp-i486 + ;; low-level thread primitives support + ;; + ;; As of SBCL 1.0.33.26, threads are part of the default build on + ;; x86oid Linux. Other platforms that support them include + ;; x86oid Darwin, FreeBSD, and Solaris. + ; :sb-thread + + ;; futex support + ;; + ;; While on linux we are able to use futexes for our locking + ;; primitive, on other platforms we don't have this luxury. + ;; + ; :sb-futex + + ;; On some operating systems the FS segment register (used for SBCL's + ;; thread local storage) is not reliably preserved in signal + ;; handlers, so we need to restore its value from the pthread thread + ;; local storage. + ; :restore-fs-segment-register-from-tls + + ;; On some x86oid operating systems (darwin) SIGTRAP is not reliably + ;; delivered for the INT3 instruction, so we use the UD2 instruction + ;; which generates SIGILL instead. + ; :ud2-breakpoints + + ;; Support for detection of unportable code (when applied to the + ;; COMMON-LISP package, or SBCL-internal pacakges) or bad-neighbourly + ;; code (when applied to user-level packages), relating to material + ;; alteration to packages or to bindings in symbols in packages. + :sb-package-locks + + ;; Support for the entirety of the 21-bit character space defined by + ;; the Unicode consortium, rather than the classical 8-bit ISO-8859-1 + ;; character set. + :sb-unicode + + ;; Support for a full evaluator that can execute all the CL special + ;; forms, as opposed to the traditional SBCL evaluator which called + ;; COMPILE for everything complicated. + :sb-eval + + ;; Record source location information for variables, classes, conditions, + ;; packages, etc. Gives much better information on M-. in Slime, but + ;; increases core size by about 100kB. + :sb-source-locations + + ;; Record xref data for SBCL internals. This can be rather useful for + ;; people who want to develop on SBCL itself because it'll make M-? + ;; (slime-edit-uses) work which lists call/expansion/etc. sites. + ;; It'll increase the core size by major 5-6mB, though. + ; :sb-xref-for-internals + + ;; We support package local nicknames. No :sb-prefix here as we vainly + ;; believe our API is worth copying to other implementations as well. + ;; This doesn't affect the build at all, merely declares how things are. + :package-local-nicknames ;; This affects the definition of a lot of things in bignum.lisp. It ;; doesn't seem to be documented anywhere what systems it might apply ;; to. It doesn't seem to be needed for X86 systems anyway. ; :32x16-divide - ;; This is probably true for some processor types, but not X86. It - ;; affects a lot of floating point code. - ; :negative-zero-is-not-zero - ;; This is set in classic CMU CL, and presumably there it means ;; that the floating point arithmetic implementation ;; conforms to IEEE's standard. Here it definitely means that the @@ -174,10 +296,6 @@ ;; the underlying x86 hardware tries). :ieee-floating-point - ;; This seems to be the pre-GENCGC garbage collector for CMU CL, which was - ;; AFAIK never supported for the X86. - ; :gengc - ;; CMU CL had, and we inherited, code to support 80-bit LONG-FLOAT on the x86 ;; architecture. Nothing has been done to actively destroy the long float ;; support, but it hasn't been thoroughly maintained, and needs at least @@ -194,11 +312,59 @@ ;; again, if anyone's sufficiently motivated. ; :long-float + ;; Some platforms don't use a 32-bit off_t by default, and thus can't + ;; handle files larger than 2GB. This feature will control whether + ;; we'll try to use platform-specific compilation options to enable a + ;; 64-bit off_t. The intent is for this feature to be automatically + ;; enabled by make-config.sh on platforms where it's needed and known + ;; to work, you shouldn't be enabling it manually. You might however + ;; want to disable it, if you need to pass file descriptors to + ;; foreign code that uses a 32-bit off_t. + ; :largefile + + ;; Enabled automatically on platforms that have VOPs to compute the + ;; high half of a full word-by-word multiplication. When disabled, + ;; SB-KERNEL:%MULTIPLY-HIGH is implemented in terms of + ;; SB-BIGNUM:%MULTIPLY. + ; :multiply-high-vops + + ;; SBCL has optional support for zlib-based compressed core files. Enable + ;; this feature to compile it in. Obviously, doing so adds a dependency + ;; on zlib. + ; :sb-core-compression + + ;; On certain thread-enabled platforms, synchronization between threads + ;; for the purpose of stopping and starting the world around GC can be + ;; performed using safepoints instead of signals. Enable this feature + ;; to compile with safepoints and to use them for GC. + ;; (Replaces use of SIG_STOP_FOR_GC.) + ; :sb-safepoint + + ;; When compiling with safepoints, the INTERRUPT-THREAD mechanism can + ;; also use safepoints to roll the target thread to a point at which it + ;; can be interrupted safely, instead of using a signal for this + ;; purpose. Enable this feature in addition to :SB-SAFEPOINT to enable + ;; such behaviour. + ;; (Replaces use of SIGPIPE, except to wake up syscalls.) + ; :sb-thruption + + ;; When compiling with safepoints and thruptions, the TIMER facility + ;; can replace its use of setitimer with a background thread. + ;; (Replaces use of SIGALRM.) + ; :sb-wtimer + + ;; This platform implements VOPs for %ash/right, variable-width shift right + ; :ash-right-vops + ;; ;; miscellaneous notes on other things which could have special significance ;; in the *FEATURES* list ;; + ;; Any target feature which affects binary compatibility of fasl files + ;; needs to be recorded in *FEATURES-POTENTIALLY-AFFECTING-FASL-FORMAT* + ;; (elsewhere). + ;; notes on the :NIL and :IGNORE features: ;; ;; #+NIL is used to comment out forms. Occasionally #+IGNORE is used @@ -227,30 +393,73 @@ ;; notes on local features (which are set automatically by the ;; configuration script, and should not be set here unless you ;; really, really know what you're doing): - ;; + ;; ;; machine architecture features: ;; :x86 ;; any Intel 386 or better, or compatibles like the AMD K6 or K7 + ;; :x86-64 + ;; any x86-64 CPU running in 64-bit mode ;; :alpha ;; DEC/Compaq Alpha CPU - ;; (No other CPUs are supported by SBCL as of 0.6.12.15, but SPARC or - ;; PowerPC support could be ported from CMU CL if anyone is - ;; sufficiently motivated to do so, or if you're *really* motivated, - ;; you could write a port from scratch for a new CPU architecture.) + ;; :sparc + ;; any Sun UltraSPARC (possibly also non-Ultras -- currently untested) + ;; :ppc + ;; any PowerPC CPU + ;; :hppa + ;; any PA-RISC CPU + ;; :mips + ;; any MIPS CPU (in little-endian mode with :little-endian) + ;; ;; (CMU CL also had a :pentium feature, which affected the definition - ;; of some floating point vops. It was present but not enabled or - ;; documented in the CMU CL code that SBCL is derived from, and is - ;; present but stale in SBCL as of 0.6.12.) + ;; of some floating point vops. It was present but not enabled or + ;; documented in the CMU CL code that SBCL is derived from, and has + ;; now been moved to the backend-subfeatures mechanism.) + ;; + ;; properties derived from the machine architecture + ;; :control-stack-grows-downward-not-upward + ;; On the X86, the Lisp control stack grows downward. On the + ;; other supported CPU architectures as of sbcl-0.7.1.40, the + ;; system stack grows upward. + ;; Note that there are other stack-related differences between the + ;; X86 port and the other ports. E.g. on the X86, the Lisp control + ;; stack coincides with the C stack, meaning that on the X86 there's + ;; stuff on the control stack that the Lisp-level debugger doesn't + ;; understand very well. As of sbcl-0.7.1.40 things like that are + ;; just parameterized by #!+X86, but it'd probably be better to + ;; use new flags like :CONTROL-STACK-CONTAINS-C-STACK. + ;; + ;; :stack-allocatable-closures + ;; The compiler can allocate dynamic-extent closures on stack. + ;; + ;; :alien-callbacks + ;; Alien callbacks have been implemented for this platform. + ;; + ;; :compare-and-swap-vops + ;; The backend implements compare-and-swap VOPs. + ;; + ;; :memory-barrier-vops + ;; Memory barriers (for multi-threaded synchronization) have been + ;; implemented for this platform. ;; ;; operating system features: + ;; :unix = We're intended to run under some Unix-like OS. (This is not + ;; exclusive with the features which indicate which particular + ;; Unix-like OS we're intended to run under.) ;; :linux = We're intended to run under some version of Linux. ;; :bsd = We're intended to run under some version of BSD Unix. (This ;; is not exclusive with the features which indicate which ;; particular version of BSD we're intended to run under.) ;; :freebsd = We're intended to run under FreeBSD. - ;; :openbsd = We're intended to run under FreeBSD. - ;; (No others are supported by SBCL as of 0.6.7, but :hpux or - ;; :solaris support could be ported from CMU CL if anyone is - ;; sufficiently motivated to do so, and it'd even be possible, - ;; though harder, to port the system to Microsoft Windows.) + ;; :openbsd = We're intended to run under OpenBSD. + ;; :netbsd = We're intended to run under NetBSD. + ;; :darwin = We're intended to run under Darwin (including MacOS X). + ;; :sunos = We're intended to run under Solaris user environment + ;; with the SunOS kernel. + ;; :hpux = We're intended to run under HP-UX 11.11 or later + ;; :osf1 = We're intended to run under Tru64 (aka Digital Unix + ;; aka OSF/1). + ;; :win32 = We're intended to under some version of Microsoft Windows. + ;; (No others are supported by SBCL as of 1.0.8, but :hpux or :irix + ;; support could be ported from CMU CL if anyone is sufficiently + ;; motivated to do so.) )