1 ;;;; stuff that knows about dumping FASL files
3 ;;;; This software is part of the SBCL system. See the README file for
6 ;;;; This software is derived from the CMU CL system, which was
7 ;;;; written at Carnegie Mellon University and released into the
8 ;;;; public domain. The software is in the public domain and is
9 ;;;; provided with absolutely no warranty. See the COPYING and CREDITS
10 ;;;; files for more information.
12 (in-package "SB!FASL")
13 ;;; KLUDGE: Even though we're IN-PACKAGE SB!FASL, some of the code in
14 ;;; here is awfully chummy with the SB!C package. CMU CL didn't have
15 ;;; any separation between the two packages, and a lot of tight
16 ;;; coupling remains. -- WHN 2001-06-04
18 ;;;; fasl dumper state
20 ;;; The FASL-OUTPUT structure represents everything we need to
21 ;;; know about dumping to a fasl file. (We need to objectify the
22 ;;; state because the fasdumper must be reentrant.)
23 (defstruct (fasl-output
24 #-no-ansi-print-object
25 (:print-object (lambda (x s)
26 (print-unreadable-object (x s :type t)
27 (prin1 (namestring (fasl-output-stream x))
30 ;; the stream we dump to
31 (stream (missing-arg) :type stream)
32 ;; hashtables we use to keep track of dumped constants so that we
33 ;; can get them from the table rather than dumping them again. The
34 ;; EQUAL-TABLE is used for lists and strings, and the EQ-TABLE is
35 ;; used for everything else. We use a separate EQ table to avoid
36 ;; performance patholigies with objects for which EQUAL degnerates
37 ;; to EQL. Everything entered in the EQUAL table is also entered in
39 (equal-table (make-hash-table :test 'equal) :type hash-table)
40 (eq-table (make-hash-table :test 'eq) :type hash-table)
41 ;; the table's current free pointer: the next offset to be used
42 (table-free 0 :type index)
43 ;; an alist (PACKAGE . OFFSET) of the table offsets for each package
44 ;; we have currently located.
45 (packages () :type list)
46 ;; a table mapping from the Entry-Info structures for dumped XEPs to
47 ;; the table offsets of the corresponding code pointers
48 (entry-table (make-hash-table :test 'eq) :type hash-table)
49 ;; a table holding back-patching info for forward references to XEPs.
50 ;; The key is the Entry-Info structure for the XEP, and the value is
51 ;; a list of conses (<code-handle> . <offset>), where <code-handle>
52 ;; is the offset in the table of the code object needing to be
53 ;; patched, and <offset> is the offset that must be patched.
54 (patch-table (make-hash-table :test 'eq) :type hash-table)
55 ;; a list of the table handles for all of the DEBUG-INFO structures
56 ;; dumped in this file. These structures must be back-patched with
57 ;; source location information when the compilation is complete.
58 (debug-info () :type list)
59 ;; This is used to keep track of objects that we are in the process
60 ;; of dumping so that circularities can be preserved. The key is the
61 ;; object that we have previously seen, and the value is the object
62 ;; that we reference in the table to find this previously seen
63 ;; object. (The value is never NIL.)
65 ;; Except with list objects, the key and the value are always the
66 ;; same. In a list, the key will be some tail of the value.
67 (circularity-table (make-hash-table :test 'eq) :type hash-table)
68 ;; a hash table of structures that are allowed to be dumped. If we
69 ;; try to dump a structure that isn't in this hash table, we lose.
70 (valid-structures (make-hash-table :test 'eq) :type hash-table))
72 ;;; This structure holds information about a circularity.
73 (defstruct (circularity (:copier nil))
74 ;; the kind of modification to make to create circularity
75 (type (missing-arg) :type (member :rplaca :rplacd :svset :struct-set))
76 ;; the object containing circularity
78 ;; index in object for circularity
79 (index (missing-arg) :type index)
80 ;; the object to be stored at INDEX in OBJECT. This is that the key
81 ;; that we were using when we discovered the circularity.
83 ;; the value that was associated with VALUE in the
84 ;; CIRCULARITY-TABLE. This is the object that we look up in the
85 ;; EQ-TABLE to locate VALUE.
88 ;;; a list of the CIRCULARITY structures for all of the circularities
89 ;;; detected in the current top level call to DUMP-OBJECT. Setting
90 ;;; this lobotomizes circularity detection as well, since circular
91 ;;; dumping uses the table.
92 (defvar *circularities-detected*)
94 ;;; used to inhibit table access when dumping forms to be read by the
96 (defvar *cold-load-dump* nil)
98 ;;; used to turn off the structure validation during dumping of source
100 (defvar *dump-only-valid-structures* t)
103 ;;; Write the byte B to the specified FASL-OUTPUT stream.
104 (defun dump-byte (b fasl-output)
105 (declare (type (unsigned-byte 8) b) (type fasl-output fasl-output))
106 (write-byte b (fasl-output-stream fasl-output)))
108 ;;; Dump a 4 byte unsigned integer.
109 (defun dump-unsigned-32 (num fasl-output)
110 (declare (type (unsigned-byte 32) num))
111 (declare (type fasl-output fasl-output))
112 (let ((stream (fasl-output-stream fasl-output)))
114 (write-byte (ldb (byte 8 (* 8 i)) num) stream))))
116 ;;; Dump NUM to the fasl stream, represented by N bytes. This works
117 ;;; for either signed or unsigned integers. There's no range checking
118 ;;; -- if you don't specify enough bytes for the number to fit, this
119 ;;; function cheerfully outputs the low bytes.
120 (defun dump-integer-as-n-bytes (num bytes fasl-output)
121 (declare (integer num) (type index bytes))
122 (declare (type fasl-output fasl-output))
123 (do ((n num (ash n -8))
126 (declare (type index i))
127 (dump-byte (logand n #xff) fasl-output))
130 ;;; Setting this variable to an (UNSIGNED-BYTE 32) value causes
131 ;;; DUMP-FOP to use it as a counter and emit a FOP-NOP4 with the
132 ;;; counter value before every ordinary fop. This can make it easier
133 ;;; to follow the progress of LOAD-AS-FASL when
134 ;;; debugging/testing/experimenting.
135 #!+sb-show (defvar *fop-nop4-count* nil)
136 #!+sb-show (declaim (type (or (unsigned-byte 32) null) *fop-nop4-count*))
138 ;;; Dump the FOP code for the named FOP to the specified FASL-OUTPUT.
140 ;;; FIXME: This should be a function, with a compiler macro expansion
141 ;;; for the common constant-FS case. (Among other things, that'll stop
142 ;;; it from EVALing ,FILE multiple times.)
144 ;;; FIXME: Compiler macros, frozen classes, inlining, and similar
145 ;;; optimizations should be conditional on #!+SB-FROZEN.
146 (defmacro dump-fop (fs file)
147 (let* ((fs (eval fs))
148 (val (get fs 'fop-code)))
152 (when *fop-nop4-count*
153 (dump-byte ,(get 'fop-nop4 'fop-code) ,file)
154 (dump-unsigned-32 (mod (incf *fop-nop4-count*) (expt 2 32)) ,file))
155 (dump-byte ',val ,file))
156 (error "compiler bug: ~S is not a legal fasload operator." fs))))
158 ;;; Dump a FOP-Code along with an integer argument, choosing the FOP
159 ;;; based on whether the argument will fit in a single byte.
161 ;;; FIXME: This, like DUMP-FOP, should be a function with a
162 ;;; compiler-macro expansion.
163 (defmacro dump-fop* (n byte-fop word-fop file)
167 (dump-fop ',byte-fop ,n-file)
168 (dump-byte ,n-n ,n-file))
170 (dump-fop ',word-fop ,n-file)
171 (dump-unsigned-32 ,n-n ,n-file)))))
173 ;;; Push the object at table offset Handle on the fasl stack.
174 (defun dump-push (handle fasl-output)
175 (declare (type index handle) (type fasl-output fasl-output))
176 (dump-fop* handle fop-byte-push fop-push fasl-output)
179 ;;; Pop the object currently on the fasl stack top into the table, and
180 ;;; return the table index, incrementing the free pointer.
181 (defun dump-pop (fasl-output)
183 (fasl-output-table-free fasl-output)
184 (dump-fop 'fop-pop fasl-output)
185 (incf (fasl-output-table-free fasl-output))))
187 ;;; If X is in File's EQUAL-TABLE, then push the object and return T,
188 ;;; otherwise NIL. If *COLD-LOAD-DUMP* is true, then do nothing and
190 (defun equal-check-table (x fasl-output)
191 (declare (type fasl-output fasl-output))
192 (unless *cold-load-dump*
193 (let ((handle (gethash x (fasl-output-equal-table fasl-output))))
195 (dump-push handle fasl-output)
200 ;;; These functions are called after dumping an object to save the
201 ;;; object in the table. The object (also passed in as X) must already
202 ;;; be on the top of the FOP stack. If *COLD-LOAD-DUMP* is true, then
203 ;;; we don't do anything.
204 (defun eq-save-object (x fasl-output)
205 (declare (type fasl-output fasl-output))
206 (unless *cold-load-dump*
207 (let ((handle (dump-pop fasl-output)))
208 (setf (gethash x (fasl-output-eq-table fasl-output)) handle)
209 (dump-push handle fasl-output)))
211 (defun equal-save-object (x fasl-output)
212 (declare (type fasl-output fasl-output))
213 (unless *cold-load-dump*
214 (let ((handle (dump-pop fasl-output)))
215 (setf (gethash x (fasl-output-equal-table fasl-output)) handle)
216 (setf (gethash x (fasl-output-eq-table fasl-output)) handle)
217 (dump-push handle fasl-output)))
220 ;;; Record X in File's CIRCULARITY-TABLE unless *COLD-LOAD-DUMP* is
221 ;;; true. This is called on objects that we are about to dump might
222 ;;; have a circular path through them.
224 ;;; The object must not currently be in this table, since the dumper
225 ;;; should never be recursively called on a circular reference.
226 ;;; Instead, the dumping function must detect the circularity and
227 ;;; arrange for the dumped object to be patched.
228 (defun note-potential-circularity (x fasl-output)
229 (unless *cold-load-dump*
230 (let ((circ (fasl-output-circularity-table fasl-output)))
231 (aver (not (gethash x circ)))
232 (setf (gethash x circ) x)))
235 ;;; Dump FORM to a fasl file so that it evaluated at load time in normal
236 ;;; load and at cold-load time in cold load. This is used to dump package
238 (defun fasl-dump-cold-load-form (form fasl-output)
239 (declare (type fasl-output fasl-output))
240 (dump-fop 'fop-normal-load fasl-output)
241 (let ((*cold-load-dump* t))
242 (dump-object form fasl-output))
243 (dump-fop 'fop-eval-for-effect fasl-output)
244 (dump-fop 'fop-maybe-cold-load fasl-output)
247 ;;;; opening and closing fasl files
249 ;;; Open a fasl file, write its header, and return a FASL-OUTPUT
250 ;;; object for dumping to it. Some human-readable information about
251 ;;; the source code is given by the string WHERE. If BYTE-P is true,
252 ;;; this file will contain no native code, and is thus largely
253 ;;; implementation independent.
254 (defun open-fasl-output (name where)
255 (declare (type pathname name))
256 (let* ((stream (open name
258 :if-exists :new-version
259 :element-type 'sb!assem:assembly-unit))
260 (res (make-fasl-output :stream stream)))
262 ;; Begin the header with the constant machine-readable (and
263 ;; semi-human-readable) string which is used to identify fasl files.
264 (write-string *fasl-header-string-start-string* stream)
266 ;; The constant string which begins the header is followed by
267 ;; arbitrary human-readable text, terminated by a special
269 (with-standard-io-syntax
275 using ~A version ~A~%"
277 (format-universal-time nil (get-universal-time))
279 (sb!xc:lisp-implementation-type)
280 (sb!xc:lisp-implementation-version)))
281 (dump-byte +fasl-header-string-stop-char-code+ res)
283 ;; Finish the header by outputting fasl file implementation and
284 ;; version in machine-readable form.
285 (let ((implementation +backend-fasl-file-implementation+))
286 (dump-unsigned-32 (length (symbol-name implementation)) res)
287 (dotimes (i (length (symbol-name implementation)))
288 (dump-byte (char-code (aref (symbol-name implementation) i)) res)))
289 (dump-unsigned-32 +fasl-file-version+ res)
293 ;;; Close the specified FASL-OUTPUT, aborting the write if ABORT-P.
294 (defun close-fasl-output (fasl-output abort-p)
295 (declare (type fasl-output fasl-output))
298 (aver (zerop (hash-table-count (fasl-output-patch-table fasl-output))))
301 (dump-fop 'fop-verify-empty-stack fasl-output)
302 (dump-fop 'fop-verify-table-size fasl-output)
303 (dump-unsigned-32 (fasl-output-table-free fasl-output)
305 (dump-fop 'fop-end-group fasl-output)
307 ;; That's all, folks.
308 (close (fasl-output-stream fasl-output) :abort abort-p)
311 ;;;; main entries to object dumping
313 ;;; This function deals with dumping objects that are complex enough
314 ;;; so that we want to cache them in the table, rather than repeatedly
315 ;;; dumping them. If the object is in the EQ-TABLE, then we push it,
316 ;;; otherwise, we do a type dispatch to a type specific dumping
317 ;;; function. The type specific branches do any appropriate
318 ;;; EQUAL-TABLE check and table entry.
320 ;;; When we go to dump the object, we enter it in the CIRCULARITY-TABLE.
321 (defun dump-non-immediate-object (x file)
322 (let ((index (gethash x (fasl-output-eq-table file))))
323 (cond ((and index (not *cold-load-dump*))
324 (dump-push index file))
327 (symbol (dump-symbol x file))
329 ;; KLUDGE: The code in this case has been hacked
330 ;; to match Douglas Crosher's quick fix to CMU CL
331 ;; (on cmucl-imp 1999-12-27), applied in sbcl-0.6.8.11
332 ;; with help from Martin Atzmueller. This is not an
333 ;; ideal solution; to quote DTC,
334 ;; The compiler locks up trying to coalesce the
335 ;; constant lists. The hack below will disable the
336 ;; coalescing of lists while dumping and allows
337 ;; the code to compile. The real fix would be to
338 ;; take a little more care while dumping these.
339 ;; So if better list coalescing is needed, start here.
341 (if (cyclic-list-p x)
344 (eq-save-object x file))
345 (unless (equal-check-table x file)
347 (equal-save-object x file))))
350 (eq-save-object x file))
352 (dump-structure x file)
353 (eq-save-object x file))
355 ;; FIXME: The comment at the head of
356 ;; DUMP-NON-IMMEDIATE-OBJECT says it's for objects which
357 ;; we want to save, instead of repeatedly dumping them.
358 ;; But then we dump arrays here without doing anything
359 ;; like EQUAL-SAVE-OBJECT. What gives?
362 (unless (equal-check-table x file)
364 (ratio (dump-ratio x file))
365 (complex (dump-complex x file))
366 (float (dump-float x file))
367 (integer (dump-integer x file)))
368 (equal-save-object x file)))
370 ;; This probably never happens, since bad things tend to
371 ;; be detected during IR1 conversion.
372 (error "This object cannot be dumped into a fasl file:~% ~S"
376 ;;; Dump an object of any type by dispatching to the correct
377 ;;; type-specific dumping function. We pick off immediate objects,
378 ;;; symbols and and magic lists here. Other objects are handled by
379 ;;; DUMP-NON-IMMEDIATE-OBJECT.
381 ;;; This is the function used for recursive calls to the fasl dumper.
382 ;;; We don't worry about creating circularities here, since it is
383 ;;; assumed that there is a top level call to DUMP-OBJECT.
384 (defun sub-dump-object (x file)
387 (dump-non-immediate-object x file)
388 (dump-fop 'fop-empty-list file)))
391 (dump-fop 'fop-truth file)
392 (dump-non-immediate-object x file)))
393 ((fixnump x) (dump-integer x file))
394 ((characterp x) (dump-character x file))
396 (dump-non-immediate-object x file))))
398 ;;; Dump stuff to backpatch already dumped objects. INFOS is the list
399 ;;; of CIRCULARITY structures describing what to do. The patching FOPs
400 ;;; take the value to store on the stack. We compute this value by
401 ;;; fetching the enclosing object from the table, and then CDR'ing it
403 (defun dump-circularities (infos file)
404 (let ((table (fasl-output-eq-table file)))
407 (let* ((value (circularity-value info))
408 (enclosing (circularity-enclosing-object info)))
409 (dump-push (gethash enclosing table) file)
410 (unless (eq enclosing value)
411 (do ((current enclosing (cdr current))
414 (dump-fop 'fop-nthcdr file)
415 (dump-unsigned-32 i file))
416 (declare (type index i)))))
418 (ecase (circularity-type info)
419 (:rplaca (dump-fop 'fop-rplaca file))
420 (:rplacd (dump-fop 'fop-rplacd file))
421 (:svset (dump-fop 'fop-svset file))
422 (:struct-set (dump-fop 'fop-structset file)))
423 (dump-unsigned-32 (gethash (circularity-object info) table) file)
424 (dump-unsigned-32 (circularity-index info) file))))
426 ;;; Set up stuff for circularity detection, then dump an object. All
427 ;;; shared and circular structure will be exactly preserved within a
428 ;;; single call to DUMP-OBJECT. Sharing between objects dumped by
429 ;;; separate calls is only preserved when convenient.
431 ;;; We peek at the object type so that we only pay the circular
432 ;;; detection overhead on types of objects that might be circular.
433 (defun dump-object (x file)
434 (if (compound-object-p x)
435 (let ((*circularities-detected* ())
436 (circ (fasl-output-circularity-table file)))
438 (sub-dump-object x file)
439 (when *circularities-detected*
440 (dump-circularities *circularities-detected* file)
442 (sub-dump-object x file)))
444 ;;;; LOAD-TIME-VALUE and MAKE-LOAD-FORM support
446 ;;; Emit a funcall of the function and return the handle for the
448 (defun fasl-dump-load-time-value-lambda (fun file)
449 (declare (type sb!c::clambda fun) (type fasl-output file))
450 (let ((handle (gethash (sb!c::leaf-info fun)
451 (fasl-output-entry-table file))))
453 (dump-push handle file)
454 (dump-fop 'fop-funcall file)
458 ;;; Return T iff CONSTANT has not already been dumped. It's been
459 ;;; dumped if it's in the EQ table.
460 (defun fasl-constant-already-dumped-p (constant file)
461 (if (or (gethash constant (fasl-output-eq-table file))
462 (gethash constant (fasl-output-valid-structures file)))
466 ;;; Use HANDLE whenever we try to dump CONSTANT. HANDLE should have been
467 ;;; returned earlier by FASL-DUMP-LOAD-TIME-VALUE-LAMBDA.
468 (defun fasl-note-handle-for-constant (constant handle file)
469 (let ((table (fasl-output-eq-table file)))
470 (when (gethash constant table)
471 (error "~S already dumped?" constant))
472 (setf (gethash constant table) handle))
475 ;;; Note that the specified structure can just be dumped by
476 ;;; enumerating the slots.
477 (defun fasl-validate-structure (structure file)
478 (setf (gethash structure (fasl-output-valid-structures file)) t)
484 (defun dump-ratio (x file)
485 (sub-dump-object (numerator x) file)
486 (sub-dump-object (denominator x) file)
487 (dump-fop 'fop-ratio file))
490 (defun dump-integer (n file)
493 (dump-fop 'fop-byte-integer file)
494 (dump-byte (logand #xFF n) file))
496 (dump-fop 'fop-word-integer file)
497 (dump-unsigned-32 n file))
499 (dump-fop 'fop-word-integer file)
500 (dump-integer-as-n-bytes n 4 file))
502 (let ((bytes (ceiling (1+ (integer-length n)) 8)))
503 (dump-fop* bytes fop-small-integer fop-integer file)
504 (dump-integer-as-n-bytes n bytes file)))))
506 (defun dump-float (x file)
509 (dump-fop 'fop-single-float file)
510 (dump-integer-as-n-bytes (single-float-bits x) 4 file))
512 (dump-fop 'fop-double-float file)
514 (declare (double-float x))
515 ;; FIXME: Why sometimes DUMP-UNSIGNED-32 and sometimes
516 ;; DUMP-INTEGER-AS-N-BYTES .. 4?
517 (dump-unsigned-32 (double-float-low-bits x) file)
518 (dump-integer-as-n-bytes (double-float-high-bits x) 4 file)))
521 (dump-fop 'fop-long-float file)
522 (dump-long-float x file))))
524 (defun dump-complex (x file)
527 ((complex single-float)
528 (dump-fop 'fop-complex-single-float file)
529 (dump-integer-as-n-bytes (single-float-bits (realpart x)) 4 file)
530 (dump-integer-as-n-bytes (single-float-bits (imagpart x)) 4 file))
532 ((complex double-float)
533 (dump-fop 'fop-complex-double-float file)
534 (let ((re (realpart x)))
535 (declare (double-float re))
536 (dump-unsigned-32 (double-float-low-bits re) file)
537 (dump-integer-as-n-bytes (double-float-high-bits re) 4 file))
538 (let ((im (imagpart x)))
539 (declare (double-float im))
540 (dump-unsigned-32 (double-float-low-bits im) file)
541 (dump-integer-as-n-bytes (double-float-high-bits im) 4 file)))
543 ((complex long-float)
544 ;; (There's no easy way to mix #!+LONG-FLOAT and #-SB-XC-HOST
545 ;; conditionalization at read time, so we do this SB-XC-HOST
546 ;; conditional at runtime instead.)
547 #+sb-xc-host (error "can't dump COMPLEX-LONG-FLOAT in cross-compiler")
548 (dump-fop 'fop-complex-long-float file)
549 (dump-long-float (realpart x) file)
550 (dump-long-float (imagpart x) file))
552 (sub-dump-object (realpart x) file)
553 (sub-dump-object (imagpart x) file)
554 (dump-fop 'fop-complex file))))
558 ;;; Return the table index of PKG, adding the package to the table if
559 ;;; necessary. During cold load, we read the string as a normal string
560 ;;; so that we can do the package lookup at cold load time.
562 ;;; FIXME: Despite the parallelism in names, the functionality of
563 ;;; this function is not parallel to other functions DUMP-FOO, e.g.
564 ;;; DUMP-SYMBOL and DUMP-LIST. The mapping between names and behavior
565 ;;; should be made more consistent.
566 (defun dump-package (pkg file)
567 (declare (type package pkg) (type fasl-output file))
568 (declare (values index))
569 (declare (inline assoc))
570 (cond ((cdr (assoc pkg (fasl-output-packages file) :test #'eq)))
572 (unless *cold-load-dump*
573 (dump-fop 'fop-normal-load file))
574 (dump-simple-string (package-name pkg) file)
575 (dump-fop 'fop-package file)
576 (unless *cold-load-dump*
577 (dump-fop 'fop-maybe-cold-load file))
578 (let ((entry (dump-pop file)))
579 (push (cons pkg entry) (fasl-output-packages file))
584 ;;; Dump a list, setting up patching information when there are
585 ;;; circularities. We scan down the list, checking for CDR and CAR
588 ;;; If there is a CDR circularity, we terminate the list with NIL and
589 ;;; make a CIRCULARITY notation for the CDR of the previous cons.
591 ;;; If there is no CDR circularity, then we mark the current cons and
592 ;;; check for a CAR circularity. When there is a CAR circularity, we
593 ;;; make the CAR NIL initially, arranging for the current cons to be
596 ;;; Otherwise, we recursively call the dumper to dump the current
599 ;;; Marking of the conses is inhibited when *COLD-LOAD-DUMP* is true.
600 ;;; This inhibits all circularity detection.
601 (defun dump-list (list file)
603 (not (gethash list (fasl-output-circularity-table file)))))
604 (do* ((l list (cdr l))
606 (circ (fasl-output-circularity-table file)))
609 (terminate-undotted-list n file))
611 (sub-dump-object l file)
612 (terminate-dotted-list n file))))
613 (declare (type index n))
614 (let ((ref (gethash l circ)))
616 (push (make-circularity :type :rplacd
620 :enclosing-object ref)
621 *circularities-detected*)
622 (terminate-undotted-list n file)
625 (unless *cold-load-dump*
626 (setf (gethash l circ) list))
629 (ref (gethash obj circ)))
631 (push (make-circularity :type :rplaca
635 :enclosing-object ref)
636 *circularities-detected*)
637 (sub-dump-object nil file))
639 (sub-dump-object obj file))))))
641 (defun terminate-dotted-list (n file)
642 (declare (type index n) (type fasl-output file))
644 (1 (dump-fop 'fop-list*-1 file))
645 (2 (dump-fop 'fop-list*-2 file))
646 (3 (dump-fop 'fop-list*-3 file))
647 (4 (dump-fop 'fop-list*-4 file))
648 (5 (dump-fop 'fop-list*-5 file))
649 (6 (dump-fop 'fop-list*-6 file))
650 (7 (dump-fop 'fop-list*-7 file))
651 (8 (dump-fop 'fop-list*-8 file))
652 (T (do ((nn n (- nn 255)))
654 (dump-fop 'fop-list* file)
656 (declare (type index nn))
657 (dump-fop 'fop-list* file)
658 (dump-byte 255 file)))))
660 ;;; If N > 255, must build list with one LIST operator, then LIST*
663 (defun terminate-undotted-list (n file)
664 (declare (type index n) (type fasl-output file))
666 (1 (dump-fop 'fop-list-1 file))
667 (2 (dump-fop 'fop-list-2 file))
668 (3 (dump-fop 'fop-list-3 file))
669 (4 (dump-fop 'fop-list-4 file))
670 (5 (dump-fop 'fop-list-5 file))
671 (6 (dump-fop 'fop-list-6 file))
672 (7 (dump-fop 'fop-list-7 file))
673 (8 (dump-fop 'fop-list-8 file))
675 (dump-fop 'fop-list file)
677 (t (dump-fop 'fop-list file)
679 (do ((nn (- n 255) (- nn 255)))
681 (dump-fop 'fop-list* file)
683 (declare (type index nn))
684 (dump-fop 'fop-list* file)
685 (dump-byte 255 file)))))))
689 ;;; Dump the array thing.
690 (defun dump-array (x file)
693 (dump-multi-dim-array x file)))
695 ;;; Dump the vector object. If it's not simple, then actually dump a
696 ;;; simple version of it. But we enter the original in the EQ or EQUAL
698 (defun dump-vector (x file)
699 (let ((simple-version (if (array-header-p x)
700 (coerce x 'simple-array)
702 (typecase simple-version
704 (unless (equal-check-table x file)
705 (dump-simple-string simple-version file)
706 (equal-save-object x file)))
708 (dump-simple-vector simple-version file)
709 (eq-save-object x file))
710 ((simple-array single-float (*))
711 (dump-single-float-vector simple-version file)
712 (eq-save-object x file))
713 ((simple-array double-float (*))
714 (dump-double-float-vector simple-version file)
715 (eq-save-object x file))
717 ((simple-array long-float (*))
718 (dump-long-float-vector simple-version file)
719 (eq-save-object x file))
720 ((simple-array (complex single-float) (*))
721 (dump-complex-single-float-vector simple-version file)
722 (eq-save-object x file))
723 ((simple-array (complex double-float) (*))
724 (dump-complex-double-float-vector simple-version file)
725 (eq-save-object x file))
727 ((simple-array (complex long-float) (*))
728 (dump-complex-long-float-vector simple-version file)
729 (eq-save-object x file))
731 (dump-i-vector simple-version file)
732 (eq-save-object x file)))))
734 ;;; Dump a SIMPLE-VECTOR, handling any circularities.
735 (defun dump-simple-vector (v file)
736 (declare (type simple-vector v) (type fasl-output file))
737 (note-potential-circularity v file)
738 (do ((index 0 (1+ index))
740 (circ (fasl-output-circularity-table file)))
742 (dump-fop* length fop-small-vector fop-vector file))
743 (let* ((obj (aref v index))
744 (ref (gethash obj circ)))
746 (push (make-circularity :type :svset
750 :enclosing-object ref)
751 *circularities-detected*)
752 (sub-dump-object nil file))
754 (sub-dump-object obj file))))))
756 (defun dump-i-vector (vec file &key data-only)
757 (declare (type (simple-array * (*)) vec))
758 (let ((len (length vec)))
759 (labels ((dump-unsigned-vector (size bytes)
761 (dump-fop 'fop-int-vector file)
762 (dump-unsigned-32 len file)
763 (dump-byte size file))
764 ;; The case which is easy to handle in a portable way is when
765 ;; the element size is a multiple of the output byte size, and
766 ;; happily that's the only case we need to be portable. (The
767 ;; cross-compiler has to output debug information (including
768 ;; (SIMPLE-ARRAY (UNSIGNED-BYTE 8) *).) The other cases are only
769 ;; needed in the target SBCL, so we let them be handled with
770 ;; unportable bit bashing.
771 (cond ((>= size 8) ; easy cases
772 (multiple-value-bind (floor rem) (floor size 8)
775 (dump-integer-as-n-bytes i floor file))))
776 (t ; harder cases, not supported in cross-compiler
777 (dump-raw-bytes vec bytes file))))
778 (dump-signed-vector (size bytes)
779 ;; Note: Dumping specialized signed vectors isn't
780 ;; supported in the cross-compiler. (All cases here end
781 ;; up trying to call DUMP-RAW-BYTES, which isn't
782 ;; provided in the cross-compilation host, only on the
785 (dump-fop 'fop-signed-int-vector file)
786 (dump-unsigned-32 len file)
787 (dump-byte size file))
788 (dump-raw-bytes vec bytes file)))
790 ;; KLUDGE: What exactly does the (ASH .. -3) stuff do? -- WHN 19990902
792 (dump-unsigned-vector 1 (ash (+ (the index len) 7) -3)))
793 ((simple-array (unsigned-byte 2) (*))
794 (dump-unsigned-vector 2 (ash (+ (the index (ash len 1)) 7) -3)))
795 ((simple-array (unsigned-byte 4) (*))
796 (dump-unsigned-vector 4 (ash (+ (the index (ash len 2)) 7) -3)))
797 ((simple-array (unsigned-byte 8) (*))
798 (dump-unsigned-vector 8 len))
799 ((simple-array (unsigned-byte 16) (*))
800 (dump-unsigned-vector 16 (* 2 len)))
801 ((simple-array (unsigned-byte 32) (*))
802 (dump-unsigned-vector 32 (* 4 len)))
803 ((simple-array (signed-byte 8) (*))
804 (dump-signed-vector 8 len))
805 ((simple-array (signed-byte 16) (*))
806 (dump-signed-vector 16 (* 2 len)))
807 ((simple-array (signed-byte 30) (*))
808 (dump-signed-vector 30 (* 4 len)))
809 ((simple-array (signed-byte 32) (*))
810 (dump-signed-vector 32 (* 4 len)))))))
812 ;;; Dump characters and string-ish things.
814 (defun dump-character (ch file)
815 (dump-fop 'fop-short-character file)
816 (dump-byte (char-code ch) file))
818 ;;; a helper function shared by DUMP-SIMPLE-STRING and DUMP-SYMBOL
819 (defun dump-characters-of-string (s fasl-output)
820 (declare (type string s) (type fasl-output fasl-output))
822 (dump-byte (char-code c) fasl-output))
825 ;;; Dump a SIMPLE-BASE-STRING.
826 ;;; FIXME: should be called DUMP-SIMPLE-BASE-STRING then
827 (defun dump-simple-string (s file)
828 (declare (type simple-base-string s))
829 (dump-fop* (length s) fop-small-string fop-string file)
830 (dump-characters-of-string s file)
833 ;;; If we get here, it is assumed that the symbol isn't in the table,
834 ;;; but we are responsible for putting it there when appropriate. To
835 ;;; avoid too much special-casing, we always push the symbol in the
836 ;;; table, but don't record that we have done so if *COLD-LOAD-DUMP*
838 (defun dump-symbol (s file)
839 (declare (type fasl-output file))
840 (let* ((pname (symbol-name s))
841 (pname-length (length pname))
842 (pkg (symbol-package s)))
845 (dump-fop* pname-length
846 fop-uninterned-small-symbol-save
847 fop-uninterned-symbol-save
849 ;; CMU CL had FOP-SYMBOL-SAVE/FOP-SMALL-SYMBOL-SAVE fops which
850 ;; used the current value of *PACKAGE*. Unfortunately that's
851 ;; broken w.r.t. ANSI Common Lisp semantics, so those are gone
853 ;;((eq pkg *package*)
854 ;; (dump-fop* pname-length
855 ;; fop-small-symbol-save
856 ;; fop-symbol-save file))
857 ((eq pkg sb!int:*cl-package*)
858 (dump-fop* pname-length
859 fop-lisp-small-symbol-save
862 ((eq pkg sb!int:*keyword-package*)
863 (dump-fop* pname-length
864 fop-keyword-small-symbol-save
865 fop-keyword-symbol-save
867 ((< pname-length 256)
868 (dump-fop* (dump-package pkg file)
869 fop-small-symbol-in-byte-package-save
870 fop-small-symbol-in-package-save
872 (dump-byte pname-length file))
874 (dump-fop* (dump-package pkg file)
875 fop-symbol-in-byte-package-save
876 fop-symbol-in-package-save
878 (dump-unsigned-32 pname-length file)))
880 (dump-characters-of-string pname file)
882 (unless *cold-load-dump*
883 (setf (gethash s (fasl-output-eq-table file))
884 (fasl-output-table-free file)))
886 (incf (fasl-output-table-free file)))
890 ;;;; component (function) dumping
892 (defun dump-segment (segment code-length fasl-output)
893 (declare (type sb!assem:segment segment)
894 (type fasl-output fasl-output))
895 (let* ((stream (fasl-output-stream fasl-output))
896 (nwritten (write-segment-contents segment stream)))
897 ;; In CMU CL there was no enforced connection between the CODE-LENGTH
898 ;; argument and the number of bytes actually written. I added this
899 ;; assertion while trying to debug portable genesis. -- WHN 19990902
900 (unless (= code-length nwritten)
901 (error "internal error, code-length=~W, nwritten=~W"
906 ;;; Dump all the fixups. Currently there are three flavors of fixup:
907 ;;; - assembly routines: named by a symbol
908 ;;; - foreign (C) symbols: named by a string
909 ;;; - code object references: don't need a name.
910 (defun dump-fixups (fixups fasl-output)
911 (declare (list fixups) (type fasl-output fasl-output))
912 (dolist (info fixups)
913 ;; FIXME: Packing data with LIST in NOTE-FIXUP and unpacking them
914 ;; with FIRST, SECOND, and THIRD here is hard to follow and
915 ;; maintain. Perhaps we could define a FIXUP-INFO structure to use
916 ;; instead, and rename *FIXUPS* to *FIXUP-INFO-LIST*?
917 (let* ((kind (first info))
918 (fixup (second info))
919 (name (fixup-name fixup))
920 (flavor (fixup-flavor fixup))
921 (offset (third info)))
922 ;; FIXME: This OFFSET is not what's called OFFSET in the FIXUP
923 ;; structure, it's what's called POSN in NOTE-FIXUP. (As far as
924 ;; I can tell, FIXUP-OFFSET is not actually an offset, it's an
925 ;; internal label used instead of NAME for :CODE-OBJECT fixups.
926 ;; Notice that in the :CODE-OBJECT case, NAME is ignored.)
927 (dump-fop 'fop-normal-load fasl-output)
928 (let ((*cold-load-dump* t))
929 (dump-object kind fasl-output))
930 (dump-fop 'fop-maybe-cold-load fasl-output)
931 ;; Depending on the flavor, we may have various kinds of
932 ;; noise before the offset.
935 (aver (symbolp name))
936 (dump-fop 'fop-normal-load fasl-output)
937 (let ((*cold-load-dump* t))
938 (dump-object name fasl-output))
939 (dump-fop 'fop-maybe-cold-load fasl-output)
940 (dump-fop 'fop-assembler-fixup fasl-output))
942 (aver (stringp name))
943 (dump-fop 'fop-foreign-fixup fasl-output)
944 (let ((len (length name)))
945 (aver (< len 256)) ; (limit imposed by fop definition)
946 (dump-byte len fasl-output)
948 (dump-byte (char-code (schar name i)) fasl-output))))
951 (dump-fop 'fop-code-object-fixup fasl-output)))
952 ;; No matter what the flavor, we'll always dump the offset.
953 (dump-unsigned-32 offset fasl-output)))
956 ;;; Dump out the constant pool and code-vector for component, push the
957 ;;; result in the table, and return the offset.
959 ;;; The only tricky thing is handling constant-pool references to
960 ;;; functions. If we have already dumped the function, then we just
961 ;;; push the code pointer. Otherwise, we must create back-patching
962 ;;; information so that the constant will be set when the function is
963 ;;; eventually dumped. This is a bit awkward, since we don't have the
964 ;;; handle for the code object being dumped while we are dumping its
967 ;;; We dump trap objects in any unused slots or forward referenced slots.
968 (defun dump-code-object (component
975 (declare (type component component)
976 (list trace-table-as-list)
977 (type index code-length)
978 (type fasl-output fasl-output))
980 (let* ((2comp (component-info component))
981 (constants (sb!c::ir2-component-constants 2comp))
982 (header-length (length constants))
983 (packed-trace-table (pack-trace-table trace-table-as-list))
984 (total-length (+ code-length
985 (* (length packed-trace-table)
986 sb!c::tt-bytes-per-entry))))
990 ;; Dump the offset of the trace table.
991 (dump-object code-length fasl-output)
992 ;; FIXME: As long as we don't have GENGC, the trace table is
993 ;; hardwired to be empty. And SBCL doesn't have GENGC (and as
994 ;; far as I know no modern CMU CL does either -- WHN
995 ;; 2001-10-05). So might we be able to get rid of trace tables?
997 ;; Dump the constants, noting any :entries that have to be fixed up.
998 (do ((i sb!vm:code-constants-offset (1+ i)))
999 ((>= i header-length))
1000 (let ((entry (aref constants i)))
1003 (dump-object (sb!c::constant-value entry) fasl-output))
1007 (let* ((info (sb!c::leaf-info (cdr entry)))
1008 (handle (gethash info
1009 (fasl-output-entry-table
1013 (dump-push handle fasl-output))
1015 (patches (cons info i))
1016 (dump-fop 'fop-misc-trap fasl-output)))))
1018 (dump-push (cdr entry) fasl-output))
1020 (dump-object (cdr entry) fasl-output)
1021 (dump-fop 'fop-fdefinition fasl-output))))
1023 (dump-fop 'fop-misc-trap fasl-output)))))
1025 ;; Dump the debug info.
1026 (let ((info (sb!c::debug-info-for-component component))
1027 (*dump-only-valid-structures* nil))
1028 (dump-object info fasl-output)
1029 (let ((info-handle (dump-pop fasl-output)))
1030 (dump-push info-handle fasl-output)
1031 (push info-handle (fasl-output-debug-info fasl-output))))
1033 (let ((num-consts (- header-length sb!vm:code-trace-table-offset-slot)))
1034 (cond ((and (< num-consts #x100) (< total-length #x10000))
1035 (dump-fop 'fop-small-code fasl-output)
1036 (dump-byte num-consts fasl-output)
1037 (dump-integer-as-n-bytes total-length 2 fasl-output))
1039 (dump-fop 'fop-code fasl-output)
1040 (dump-unsigned-32 num-consts fasl-output)
1041 (dump-unsigned-32 total-length fasl-output))))
1043 ;; These two dumps are only ones which contribute to our
1044 ;; TOTAL-LENGTH value.
1045 (dump-segment code-segment code-length fasl-output)
1046 (dump-i-vector packed-trace-table fasl-output :data-only t)
1048 ;; DUMP-FIXUPS does its own internal DUMP-FOPs: the bytes it
1049 ;; dumps aren't included in the TOTAL-LENGTH passed to our
1050 ;; FOP-CODE/FOP-SMALL-CODE fop.
1051 (dump-fixups fixups fasl-output)
1053 (dump-fop 'fop-sanctify-for-execution fasl-output)
1054 (let ((handle (dump-pop fasl-output)))
1055 (dolist (patch (patches))
1056 (push (cons handle (cdr patch))
1057 (gethash (car patch)
1058 (fasl-output-patch-table fasl-output))))
1061 (defun dump-assembler-routines (code-segment length fixups routines file)
1062 (dump-fop 'fop-assembler-code file)
1063 (dump-unsigned-32 length file)
1064 (write-segment-contents code-segment (fasl-output-stream file))
1065 (dolist (routine routines)
1066 (dump-fop 'fop-normal-load file)
1067 (let ((*cold-load-dump* t))
1068 (dump-object (car routine) file))
1069 (dump-fop 'fop-maybe-cold-load file)
1070 (dump-fop 'fop-assembler-routine file)
1071 (dump-unsigned-32 (label-position (cdr routine)) file))
1072 (dump-fixups fixups file)
1073 (dump-fop 'fop-sanctify-for-execution file)
1076 ;;; Dump a function-entry data structure corresponding to ENTRY to
1077 ;;; FILE. CODE-HANDLE is the table offset of the code object for the
1079 (defun dump-one-entry (entry code-handle file)
1080 (declare (type sb!c::entry-info entry) (type index code-handle)
1081 (type fasl-output file))
1082 (let ((name (sb!c::entry-info-name entry)))
1083 (dump-push code-handle file)
1084 (dump-object name file)
1085 (dump-object (sb!c::entry-info-arguments entry) file)
1086 (dump-object (sb!c::entry-info-type entry) file)
1087 (dump-fop 'fop-function-entry file)
1088 (dump-unsigned-32 (label-position (sb!c::entry-info-offset entry)) file)
1091 ;;; Alter the code object referenced by CODE-HANDLE at the specified
1092 ;;; OFFSET, storing the object referenced by ENTRY-HANDLE.
1093 (defun dump-alter-code-object (code-handle offset entry-handle file)
1094 (declare (type index code-handle entry-handle offset))
1095 (declare (type fasl-output file))
1096 (dump-push code-handle file)
1097 (dump-push entry-handle file)
1098 (dump-fop* offset fop-byte-alter-code fop-alter-code file)
1101 ;;; Dump the code, constants, etc. for component. We pass in the
1102 ;;; assembler fixups, code vector and node info.
1103 (defun fasl-dump-component (component
1109 (declare (type component component) (list trace-table))
1110 (declare (type fasl-output file))
1112 (dump-fop 'fop-verify-empty-stack file)
1113 (dump-fop 'fop-verify-table-size file)
1114 (dump-unsigned-32 (fasl-output-table-free file) file)
1117 (let ((info (sb!c::ir2-component-dyncount-info (component-info component))))
1119 (fasl-validate-structure info file)))
1121 (let ((code-handle (dump-code-object component
1127 (2comp (component-info component)))
1128 (dump-fop 'fop-verify-empty-stack file)
1130 (dolist (entry (sb!c::ir2-component-entries 2comp))
1131 (let ((entry-handle (dump-one-entry entry code-handle file)))
1132 (setf (gethash entry (fasl-output-entry-table file)) entry-handle)
1133 (let ((old (gethash entry (fasl-output-patch-table file))))
1136 (dump-alter-code-object (car patch)
1140 (remhash entry (fasl-output-patch-table file)))))))
1143 (defun dump-push-previously-dumped-fun (fun fasl-output)
1144 (declare (type sb!c::clambda fun))
1145 (let ((handle (gethash (sb!c::leaf-info fun)
1146 (fasl-output-entry-table fasl-output))))
1148 (dump-push handle fasl-output))
1151 ;;; Dump a FOP-FUNCALL to call an already-dumped top level lambda at
1153 (defun fasl-dump-toplevel-lambda-call (fun fasl-output)
1154 (declare (type sb!c::clambda fun))
1155 (dump-push-previously-dumped-fun fun fasl-output)
1156 (dump-fop 'fop-funcall-for-effect fasl-output)
1157 (dump-byte 0 fasl-output)
1160 ;;; Dump a FOP-FSET to arrange static linkage (at cold init) between
1161 ;;; FUN-NAME and the already-dumped function whose dump handle is
1162 ;;; FUN-DUMP-HANDLE.
1164 (defun fasl-dump-cold-fset (fun-name fun-dump-handle fasl-output)
1165 (declare (type fixnum fun-dump-handle))
1166 (aver (legal-fun-name-p fun-name))
1167 (dump-non-immediate-object fun-name fasl-output)
1168 (dump-push fun-dump-handle fasl-output)
1169 (dump-fop 'fop-fset fasl-output)
1172 ;;; Compute the correct list of DEBUG-SOURCE structures and backpatch
1173 ;;; all of the dumped DEBUG-INFO structures. We clear the
1174 ;;; FASL-OUTPUT-DEBUG-INFO, so that subsequent components with
1175 ;;; different source info may be dumped.
1176 (defun fasl-dump-source-info (info fasl-output)
1177 (declare (type sb!c::source-info info))
1178 (let ((res (sb!c::debug-source-for-info info))
1179 (*dump-only-valid-structures* nil))
1180 (dump-object res fasl-output)
1181 (let ((res-handle (dump-pop fasl-output)))
1182 (dolist (info-handle (fasl-output-debug-info fasl-output))
1183 (dump-push res-handle fasl-output)
1184 (dump-fop 'fop-structset fasl-output)
1185 (dump-unsigned-32 info-handle fasl-output)
1186 (dump-unsigned-32 2 fasl-output))))
1187 (setf (fasl-output-debug-info fasl-output) nil)
1190 ;;;; dumping structures
1192 (defun dump-structure (struct file)
1193 (when *dump-only-valid-structures*
1194 (unless (gethash struct (fasl-output-valid-structures file))
1195 (error "attempt to dump invalid structure:~% ~S~%How did this happen?"
1197 (note-potential-circularity struct file)
1198 (do ((index 0 (1+ index))
1199 (length (%instance-length struct))
1200 (circ (fasl-output-circularity-table file)))
1202 (dump-fop* length fop-small-struct fop-struct file))
1203 (let* ((obj (%instance-ref struct index))
1204 (ref (gethash obj circ)))
1206 (push (make-circularity :type :struct-set
1210 :enclosing-object ref)
1211 *circularities-detected*)
1212 (sub-dump-object nil file))
1214 (sub-dump-object obj file))))))
1216 (defun dump-layout (obj file)
1217 (when (layout-invalid obj)
1218 (compiler-error "attempt to dump reference to obsolete class: ~S"
1219 (layout-class obj)))
1220 (let ((name (sb!xc:class-name (layout-class obj))))
1222 (compiler-error "dumping anonymous layout: ~S" obj))
1223 (dump-fop 'fop-normal-load file)
1224 (let ((*cold-load-dump* t))
1225 (dump-object name file))
1226 (dump-fop 'fop-maybe-cold-load file))
1227 (sub-dump-object (layout-inherits obj) file)
1228 (sub-dump-object (layout-depthoid obj) file)
1229 (sub-dump-object (layout-length obj) file)
1230 (dump-fop 'fop-layout file))