1 ;;;; cold initialization stuff, plus some other miscellaneous stuff
2 ;;;; that we don't have any better place for
4 ;;;; This software is part of the SBCL system. See the README file for
7 ;;;; This software is derived from the CMU CL system, which was
8 ;;;; written at Carnegie Mellon University and released into the
9 ;;;; public domain. The software is in the public domain and is
10 ;;;; provided with absolutely no warranty. See the COPYING and CREDITS
11 ;;;; files for more information.
13 (in-package "SB!IMPL")
15 ;;;; burning our ships behind us
17 ;;; There's a fair amount of machinery which is needed only at cold
18 ;;; init time, and should be discarded before freezing the final
19 ;;; system. We discard it by uninterning the associated symbols.
20 ;;; Rather than using a special table of symbols to be uninterned,
21 ;;; which might be tedious to maintain, instead we use a hack:
22 ;;; anything whose name matches a magic character pattern is
24 (defun !unintern-init-only-stuff ()
25 (do ((any-changes? nil nil))
27 (dolist (package (list-all-packages))
28 (do-symbols (symbol package)
29 (let ((name (symbol-name symbol)))
30 (when (or (string= name "!" :end1 1 :end2 1)
31 (and (>= (length name) 2)
32 (string= name "*!" :end1 2 :end2 2)))
33 (/show0 "uninterning cold-init-only symbol..")
34 (/primitive-print name)
35 (unintern symbol package)
36 (setf any-changes? t)))))
42 ;;; a list of toplevel things set by GENESIS
43 (defvar *!reversed-cold-toplevels*)
45 ;;; a SIMPLE-VECTOR set by GENESIS
46 (defvar *!load-time-values*)
48 (defun !cold-lose (msg)
49 (%primitive print msg)
50 (%primitive print "too early in cold init to recover from errors")
53 (eval-when (:compile-toplevel :execute)
54 ;; FIXME: Perhaps we should make SHOW-AND-CALL-AND-FMAKUNBOUND, too,
55 ;; and use it for most of the cold-init functions. (Just be careful
56 ;; not to use it for the COLD-INIT-OR-REINIT functions.)
57 (sb!xc:defmacro show-and-call (name)
59 (/primitive-print ,(symbol-name name))
62 ;;; called when a cold system starts up
64 #!+sb-doc "Give the world a shove and hope it spins."
66 (/show0 "entering !COLD-INIT")
68 ;; FIXME: It'd probably be cleaner to have most of the stuff here
69 ;; handled by calls like !GC-COLD-INIT, !ERROR-COLD-INIT, and
70 ;; !UNIX-COLD-INIT. And *TYPE-SYSTEM-INITIALIZED* could be changed to
71 ;; *TYPE-SYSTEM-INITIALIZED-WHEN-BOUND* so that it doesn't need to
72 ;; be explicitly set in order to be meaningful.
73 (setf *gc-notify-stream* nil
76 *already-maybe-gcing* t
78 *need-to-collect-garbage* nil
79 sb!unix::*interrupts-enabled* t
80 sb!unix::*interrupt-pending* nil
81 *break-on-signals* nil
82 *maximum-error-depth* 10
83 *current-error-depth* 0
84 *cold-init-complete-p* nil
85 *type-system-initialized* nil)
87 (show-and-call !typecheckfuns-cold-init)
89 ;; Anyone might call RANDOM to initialize a hash value or something;
90 ;; and there's nothing which needs to be initialized in order for
91 ;; this to be initialized, so we initialize it right away.
92 (show-and-call !random-cold-init)
94 (show-and-call !package-cold-init)
96 ;; All sorts of things need INFO and/or (SETF INFO).
97 (/show0 "about to SHOW-AND-CALL !GLOBALDB-COLD-INIT")
98 (show-and-call !globaldb-cold-init)
100 ;; This needs to be done early, but needs to be after INFO is
102 (show-and-call !fdefn-cold-init)
104 ;; Various toplevel forms call MAKE-ARRAY, which calls SUBTYPEP, so
105 ;; the basic type machinery needs to be initialized before toplevel
107 (show-and-call !type-class-cold-init)
108 (show-and-call !typedefs-cold-init)
109 (show-and-call !classes-cold-init)
110 (show-and-call !early-type-cold-init)
111 (show-and-call !late-type-cold-init)
112 (show-and-call !alien-type-cold-init)
113 (show-and-call !target-type-cold-init)
114 (show-and-call !vm-type-cold-init)
115 ;; FIXME: It would be tidy to make sure that that these cold init
116 ;; functions are called in the same relative order as the toplevel
117 ;; forms of the corresponding source files.
119 ;;(show-and-call !package-cold-init)
120 (show-and-call !policy-cold-init-or-resanify)
121 (/show0 "back from !POLICY-COLD-INIT-OR-RESANIFY")
123 ;; KLUDGE: Why are fixups mixed up with toplevel forms? Couldn't
124 ;; fixups be done separately? Wouldn't that be clearer and better?
126 (/show0 "doing cold toplevel forms and fixups")
127 (/show0 "(LISTP *!REVERSED-COLD-TOPLEVELS*)=..")
128 (/hexstr (if (listp *!reversed-cold-toplevels*) "true" "NIL"))
129 (/show0 "about to calculate (LENGTH *!REVERSED-COLD-TOPLEVELS*)")
130 (/show0 "(LENGTH *!REVERSED-COLD-TOPLEVELS*)=..")
131 #!+sb-show (let ((r-c-tl-length (length *!reversed-cold-toplevels*)))
132 (/show0 "(length calculated..)")
133 (let ((hexstr (hexstr r-c-tl-length)))
134 (/show0 "(hexstr calculated..)")
135 (/primitive-print hexstr)))
136 (let (#!+sb-show (index-in-cold-toplevels 0))
137 #!+sb-show (declare (type fixnum index-in-cold-toplevels))
139 (dolist (toplevel-thing (prog1
140 (nreverse *!reversed-cold-toplevels*)
141 ;; (Now that we've NREVERSEd it, it's
142 ;; somewhat scrambled, so keep anyone
143 ;; else from trying to get at it.)
144 (makunbound '*!reversed-cold-toplevels*)))
146 (when (zerop (mod index-in-cold-toplevels 1024))
147 (/show0 "INDEX-IN-COLD-TOPLEVELS=..")
148 (/hexstr index-in-cold-toplevels))
150 (setf index-in-cold-toplevels
151 (the fixnum (1+ index-in-cold-toplevels)))
152 (typecase toplevel-thing
154 (funcall toplevel-thing))
156 (case (first toplevel-thing)
158 (setf (svref *!load-time-values* (third toplevel-thing))
159 (funcall (second toplevel-thing))))
160 (:load-time-value-fixup
161 (setf (sap-ref-32 (second toplevel-thing) 0)
162 (get-lisp-obj-address
163 (svref *!load-time-values* (third toplevel-thing)))))
165 (:load-time-code-fixup
166 (sb!vm::!do-load-time-code-fixup (second toplevel-thing)
167 (third toplevel-thing)
168 (fourth toplevel-thing)
169 (fifth toplevel-thing)))
171 (!cold-lose "bogus fixup code in *!REVERSED-COLD-TOPLEVELS*"))))
172 (t (!cold-lose "bogus function in *!REVERSED-COLD-TOPLEVELS*")))))
173 (/show0 "done with loop over cold toplevel forms and fixups")
175 ;; Set sane values again, so that the user sees sane values instead
176 ;; of whatever is left over from the last DECLAIM/PROCLAIM.
177 (show-and-call !policy-cold-init-or-resanify)
179 ;; Only do this after toplevel forms have run, 'cause that's where
181 (setf *type-system-initialized* t)
183 (show-and-call os-cold-init-or-reinit)
185 (show-and-call stream-cold-init-or-reset)
186 (show-and-call !loader-cold-init)
187 (show-and-call signal-cold-init-or-reinit)
188 (setf (sb!alien:extern-alien "internal_errors_enabled" boolean) t)
190 ;; FIXME: This list of modes should be defined in one place and
191 ;; explicitly shared between here and REINIT.
193 ;; FIXME: In CMU CL, this is done "here" (i.e. in the analogous
194 ;; lispinit.lisp code) for every processor architecture. But Daniel
195 ;; Barlow's Alpha patches suppress it for Alpha. Why the difference?
197 (set-floating-point-modes :traps '(:overflow
202 (show-and-call !class-finalize)
204 ;; The reader and printer are initialized very late, so that they
205 ;; can do hairy things like invoking the compiler as part of their
207 (show-and-call !reader-cold-init)
208 (let ((*readtable* *standard-readtable*))
209 (show-and-call !sharpm-cold-init)
210 (show-and-call !backq-cold-init))
211 (setf *readtable* (copy-readtable *standard-readtable*))
212 (setf sb!debug:*debug-readtable* (copy-readtable *standard-readtable*))
213 (sb!pretty:!pprint-cold-init)
215 ;; the ANSI-specified initial value of *PACKAGE*
216 (setf *package* (find-package "COMMON-LISP-USER"))
217 ;; FIXME: I'm not sure where it should be done, but CL-USER really
218 ;; ought to USE-PACKAGE publicly accessible packages like SB-DEBUG
219 ;; (for ARG and VAR), SB-EXT, SB-EXT-C-CALL, and SB-EXT-ALIEN so
220 ;; that the user has a hint about which symbols we consider public.
221 ;; (Perhaps SB-DEBUG wouldn't need to be in the list if ARG and VAR
222 ;; could be typed directly, with no parentheses, at the debug prompt
223 ;; the way that e.g. F or BACKTRACE can be?)
225 (/show0 "done initializing, setting *COLD-INIT-COMPLETE-P*")
226 (setf *cold-init-complete-p* t)
228 ;; The system is finally ready for GC.
229 (setf *already-maybe-gcing* nil)
230 (/show0 "enabling GC")
232 (/show0 "doing first GC")
234 (/show0 "back from first GC")
238 (/show0 "going into toplevel loop")
239 (handling-end-of-the-world
242 (defun quit (&key recklessly-p
243 (unix-code 0 unix-code-p)
244 (unix-status unix-code))
246 "Terminate the current Lisp. Things are cleaned up (with UNWIND-PROTECT
247 and so forth) unless RECKLESSLY-P is non-NIL. On UNIX-like systems,
248 UNIX-STATUS is used as the status code."
249 (declare (type (signed-byte 32) unix-code))
250 ;; FIXME: UNIX-CODE was deprecated in sbcl-0.6.8, after having been
251 ;; around for less than a year. It should be safe to remove it after
254 (warn "The UNIX-CODE argument is deprecated. Use the UNIX-STATUS argument
255 instead (which is another name for the same thing)."))
257 (sb!unix:unix-exit unix-status)
258 (throw '%end-of-the-world unix-status)))
260 ;;;; initialization functions
265 (os-cold-init-or-reinit)
267 (signal-cold-init-or-reinit)
269 (setf (sb!alien:extern-alien "internal_errors_enabled" boolean) t)
270 (set-floating-point-modes :traps
274 ;; PRINT seems not to like x86 NPX
275 ;; denormal floats like
276 ;; LEAST-NEGATIVE-SINGLE-FLOAT, so
277 ;; the :UNDERFLOW exceptions are
278 ;; disabled by default. Joe User can
279 ;; explicitly enable them if
282 ;; Clear pseudo atomic in case this core wasn't compiled with
285 ;; FIXME: In SBCL our cores are always compiled with support. So
286 ;; we don't need to do this, do we? At least not for this
287 ;; reason.. (Perhaps we should do it anyway in case someone
288 ;; manages to save an image from within a pseudo-atomic-atomic
290 #!+x86 (setf *pseudo-atomic-atomic* 0))
293 ;;;; some support for any hapless wretches who end up debugging cold
296 ;;; Decode THING into hexadecimal notation using only machinery
297 ;;; available early in cold init.
299 (defun hexstr (thing)
300 (/noshow0 "entering HEXSTR")
301 (let ((addr (sb!kernel:get-lisp-obj-address thing))
302 (str (make-string 10)))
303 (/noshow0 "ADDR and STR calculated")
304 (setf (char str 0) #\0
306 (/noshow0 "CHARs 0 and 1 set")
308 (/noshow0 "at head of DOTIMES loop")
309 (let* ((nibble (ldb (byte 4 0) addr))
310 (chr (char "0123456789abcdef" nibble)))
311 (declare (type (unsigned-byte 4) nibble)
313 (/noshow0 "NIBBLE and CHR calculated")
314 (setf (char str (- 9 i)) chr
315 addr (ash addr -4))))
319 (defun cold-print (x)
321 (simple-string (sb!sys:%primitive print x))
322 (symbol (sb!sys:%primitive print (symbol-name x)))
323 (list (let ((count 0))
324 (sb!sys:%primitive print "list:")
326 (when (>= (incf count) 4)
327 (sb!sys:%primitive print "...")
330 (t (sb!sys:%primitive print (hexstr x)))))