- (cond
- ((<= nvals 1)
- (note-this-location vop :single-value-return)
- (inst cmov :c rsp-tn rbx-tn))
- ((<= nvals register-arg-count)
- (let ((regs-defaulted (gen-label)))
- (note-this-location vop :unknown-return)
- (inst jmp :c regs-defaulted)
- ;; Default the unsupplied registers.
- (let* ((2nd-tn-ref (tn-ref-across values))
- (2nd-tn (tn-ref-tn 2nd-tn-ref)))
- (inst mov 2nd-tn nil-value)
- (when (> nvals 2)
- (loop
- for tn-ref = (tn-ref-across 2nd-tn-ref)
- then (tn-ref-across tn-ref)
- for count from 2 below register-arg-count
- do (inst mov (tn-ref-tn tn-ref) 2nd-tn))))
- (inst mov rbx-tn rsp-tn)
- (emit-label regs-defaulted)
- (inst mov rsp-tn rbx-tn)))
- ((<= nvals 7)
- ;; The number of bytes depends on the relative jump instructions.
- ;; Best case is 31+(n-3)*14, worst case is 35+(n-3)*18. For
- ;; NVALS=6 that is 73/89 bytes, and for NVALS=7 that is 87/107
- ;; bytes which is likely better than using the blt below.
- (let ((regs-defaulted (gen-label))
- (defaulting-done (gen-label))
- (default-stack-slots (gen-label)))
- (note-this-location vop :unknown-return)
- ;; Branch off to the MV case.
- (inst jmp :c regs-defaulted)
- ;; Do the single value case.
- ;; Default the register args
- (inst mov rax-tn nil-value)
- (do ((i 1 (1+ i))
- (val (tn-ref-across values) (tn-ref-across val)))
- ((= i (min nvals register-arg-count)))
- (inst mov (tn-ref-tn val) rax-tn))
-
- ;; Fake other registers so it looks like we returned with all the
- ;; registers filled in.
- (move rbx-tn rsp-tn)
- (inst push rdx-tn)
- (inst jmp default-stack-slots)
-
- (emit-label regs-defaulted)
-
- (inst mov rax-tn nil-value)
- (storew rdx-tn rbx-tn -1)
- (collect ((defaults))
- (do ((i register-arg-count (1+ i))
- (val (do ((i 0 (1+ i))
- (val values (tn-ref-across val)))
- ((= i register-arg-count) val))
- (tn-ref-across val)))
- ((null val))
- (let ((default-lab (gen-label))
- (tn (tn-ref-tn val)))
- (defaults (cons default-lab tn))
-
- (inst cmp rcx-tn (fixnumize i))
- (inst jmp :be default-lab)
- (loadw rdx-tn rbx-tn (frame-word-offset i))
- (inst mov tn rdx-tn)))
-
- (emit-label defaulting-done)
- (loadw rdx-tn rbx-tn -1)
- (move rsp-tn rbx-tn)
-
- (let ((defaults (defaults)))
- (when defaults
- (assemble (*elsewhere*)
- (trace-table-entry trace-table-fun-prologue)
- (emit-label default-stack-slots)
- (dolist (default defaults)
- (emit-label (car default))
- (inst mov (cdr default) rax-tn))
- (inst jmp defaulting-done)
- (trace-table-entry trace-table-normal)))))))
- (t
- (let ((regs-defaulted (gen-label))
- (restore-edi (gen-label))
- (no-stack-args (gen-label))
- (default-stack-vals (gen-label))
- (count-okay (gen-label)))
- (note-this-location vop :unknown-return)
- ;; Branch off to the MV case.
- (inst jmp :c regs-defaulted)
-
- ;; Default the register args, and set up the stack as if we
- ;; entered the MV return point.
- (inst mov rbx-tn rsp-tn)
- (inst push rdx-tn)
- (inst mov rdi-tn nil-value)
- (inst push rdi-tn)
- (inst mov rsi-tn rdi-tn)
- ;; Compute a pointer to where to put the [defaulted] stack values.
- (emit-label no-stack-args)
- (inst lea rdi-tn
- (make-ea :qword :base rbp-tn
- :disp (frame-byte-offset register-arg-count)))
- ;; Load RAX with NIL so we can quickly store it, and set up
- ;; stuff for the loop.
- (inst mov rax-tn nil-value)
- (inst std)
- (inst mov rcx-tn (- nvals register-arg-count))
- ;; Jump into the default loop.
- (inst jmp default-stack-vals)
-
- ;; The regs are defaulted. We need to copy any stack arguments,
- ;; and then default the remaining stack arguments.
- (emit-label regs-defaulted)
- ;; Save EDI.
- (storew rdi-tn rbx-tn (frame-word-offset 1))
- ;; Compute the number of stack arguments, and if it's zero or
- ;; less, don't copy any stack arguments.
- (inst sub rcx-tn (fixnumize register-arg-count))
- (inst jmp :le no-stack-args)
-
- ;; Throw away any unwanted args.
- (inst cmp rcx-tn (fixnumize (- nvals register-arg-count)))
- (inst jmp :be count-okay)
- (inst mov rcx-tn (fixnumize (- nvals register-arg-count)))
- (emit-label count-okay)
- ;; Save the number of stack values.
- (inst mov rax-tn rcx-tn)
- ;; Compute a pointer to where the stack args go.
- (inst lea rdi-tn
- (make-ea :qword :base rbp-tn
- :disp (frame-byte-offset register-arg-count)))
- ;; Save ESI, and compute a pointer to where the args come from.
- (storew rsi-tn rbx-tn (frame-word-offset 2))
- (inst lea rsi-tn
- (make-ea :qword :base rbx-tn
- :disp (frame-byte-offset register-arg-count)))
- ;; Do the copy.
- (inst shr rcx-tn word-shift) ; make word count
- (inst std)
- (inst rep)
- (inst movs :qword)
- ;; Restore RSI.
- (loadw rsi-tn rbx-tn (frame-word-offset 2))
- ;; Now we have to default the remaining args. Find out how many.
- (inst sub rax-tn (fixnumize (- nvals register-arg-count)))
- (inst neg rax-tn)
- ;; If none, then just blow out of here.
- (inst jmp :le restore-edi)
- (inst mov rcx-tn rax-tn)
- (inst shr rcx-tn word-shift) ; word count
- ;; Load RAX with NIL for fast storing.
- (inst mov rax-tn nil-value)
- ;; Do the store.
- (emit-label default-stack-vals)
- (inst rep)
- (inst stos rax-tn)
- ;; Restore EDI, and reset the stack.
- (emit-label restore-edi)
- (loadw rdi-tn rbx-tn (frame-word-offset 1))
- (inst mov rsp-tn rbx-tn)
- (inst cld))))
+ (let ((type (sb!c::basic-combination-derived-type node)))
+ (cond
+ ((<= nvals 1)
+ (note-this-location vop :single-value-return)
+ (cond
+ ((<= (sb!kernel:values-type-max-value-count type)
+ register-arg-count)
+ (when (and (named-type-p type)
+ (eq nil (named-type-name type)))
+ ;; The function never returns, it may happen that the code
+ ;; ends right here leavig the :SINGLE-VALUE-RETURN note
+ ;; dangling. Let's emit a NOP.
+ (inst nop)))
+ ((not (sb!kernel:values-type-may-be-single-value-p type))
+ (inst mov rsp-tn rbx-tn))
+ (t
+ (inst cmov :c rsp-tn rbx-tn))))
+ ((<= nvals register-arg-count)
+ (note-this-location vop :unknown-return)
+ (when (sb!kernel:values-type-may-be-single-value-p type)
+ (let ((regs-defaulted (gen-label)))
+ (inst jmp :c regs-defaulted)
+ ;; Default the unsupplied registers.
+ (let* ((2nd-tn-ref (tn-ref-across values))
+ (2nd-tn (tn-ref-tn 2nd-tn-ref)))
+ (inst mov 2nd-tn nil-value)
+ (when (> nvals 2)
+ (loop
+ for tn-ref = (tn-ref-across 2nd-tn-ref)
+ then (tn-ref-across tn-ref)
+ for count from 2 below register-arg-count
+ do (inst mov (tn-ref-tn tn-ref) 2nd-tn))))
+ (inst mov rbx-tn rsp-tn)
+ (emit-label regs-defaulted)))
+ (when (< register-arg-count
+ (sb!kernel:values-type-max-value-count type))
+ (inst mov rsp-tn rbx-tn)))
+ ((<= nvals 7)
+ ;; The number of bytes depends on the relative jump instructions.
+ ;; Best case is 31+(n-3)*14, worst case is 35+(n-3)*18. For
+ ;; NVALS=6 that is 73/89 bytes, and for NVALS=7 that is 87/107
+ ;; bytes which is likely better than using the blt below.
+ (let ((regs-defaulted (gen-label))
+ (defaulting-done (gen-label))
+ (default-stack-slots (gen-label)))
+ (note-this-location vop :unknown-return)
+ ;; Branch off to the MV case.
+ (inst jmp :c regs-defaulted)
+ ;; Do the single value case.
+ ;; Default the register args
+ (inst mov rax-tn nil-value)
+ (do ((i 1 (1+ i))
+ (val (tn-ref-across values) (tn-ref-across val)))
+ ((= i (min nvals register-arg-count)))
+ (inst mov (tn-ref-tn val) rax-tn))
+ ;; Fake other registers so it looks like we returned with all the
+ ;; registers filled in.
+ (move rbx-tn rsp-tn)
+ (inst jmp default-stack-slots)
+ (emit-label regs-defaulted)
+ (inst mov rax-tn nil-value)
+ (collect ((defaults))
+ (do ((i register-arg-count (1+ i))
+ (val (do ((i 0 (1+ i))
+ (val values (tn-ref-across val)))
+ ((= i register-arg-count) val))
+ (tn-ref-across val)))
+ ((null val))
+ (let ((default-lab (gen-label))
+ (tn (tn-ref-tn val))
+ (first-stack-arg-p (= i register-arg-count)))
+ (defaults (cons default-lab
+ (cons tn first-stack-arg-p)))
+ (inst cmp rcx-tn (fixnumize i))
+ (inst jmp :be default-lab)
+ (when first-stack-arg-p
+ ;; There are stack args so the frame of the callee is
+ ;; still there, save RDX in its first slot temporalily.
+ (storew rdx-tn rbx-tn (frame-word-offset sp->fp-offset)))
+ (loadw rdx-tn rbx-tn (frame-word-offset (+ sp->fp-offset i)))
+ (inst mov tn rdx-tn)))
+ (emit-label defaulting-done)
+ (loadw rdx-tn rbx-tn (frame-word-offset sp->fp-offset))
+ (move rsp-tn rbx-tn)
+ (let ((defaults (defaults)))
+ (when defaults
+ (assemble (*elsewhere*)
+ (trace-table-entry trace-table-fun-prologue)
+ (emit-label default-stack-slots)
+ (dolist (default defaults)
+ (emit-label (car default))
+ (when (cddr default)
+ ;; We are setting the first stack argument to NIL.
+ ;; The callee's stack frame is dead, save RDX by
+ ;; pushing it to the stack, it will end up at same
+ ;; place as in the (STOREW RDX-TN RBX-TN -1) case
+ ;; above.
+ (inst push rdx-tn))
+ (inst mov (second default) rax-tn))
+ (inst jmp defaulting-done)
+ (trace-table-entry trace-table-normal)))))))
+ (t
+ (let ((regs-defaulted (gen-label))
+ (restore-edi (gen-label))
+ (no-stack-args (gen-label))
+ (default-stack-vals (gen-label))
+ (count-okay (gen-label)))
+ (note-this-location vop :unknown-return)
+ ;; Branch off to the MV case.
+ (inst jmp :c regs-defaulted)
+ ;; Default the register args, and set up the stack as if we
+ ;; entered the MV return point.
+ (inst mov rbx-tn rsp-tn)
+ (inst mov rdi-tn nil-value)
+ (inst mov rsi-tn rdi-tn)
+ ;; Compute a pointer to where to put the [defaulted] stack values.
+ (emit-label no-stack-args)
+ (inst push rdx-tn)
+ (inst push rdi-tn)
+ (inst lea rdi-tn
+ (make-ea :qword :base rbp-tn
+ :disp (frame-byte-offset register-arg-count)))
+ ;; Load RAX with NIL so we can quickly store it, and set up
+ ;; stuff for the loop.
+ (inst mov rax-tn nil-value)
+ (inst std)
+ (inst mov rcx-tn (- nvals register-arg-count))
+ ;; Jump into the default loop.
+ (inst jmp default-stack-vals)
+ ;; The regs are defaulted. We need to copy any stack arguments,
+ ;; and then default the remaining stack arguments.
+ (emit-label regs-defaulted)
+ ;; Compute the number of stack arguments, and if it's zero or
+ ;; less, don't copy any stack arguments.
+ (inst sub rcx-tn (fixnumize register-arg-count))
+ (inst jmp :le no-stack-args)
+ ;; Save EDI.
+ (storew rdi-tn rbx-tn (frame-word-offset (+ sp->fp-offset 1)))
+ ;; Throw away any unwanted args.
+ (inst cmp rcx-tn (fixnumize (- nvals register-arg-count)))
+ (inst jmp :be count-okay)
+ (inst mov rcx-tn (fixnumize (- nvals register-arg-count)))
+ (emit-label count-okay)
+ ;; Save the number of stack values.
+ (inst mov rax-tn rcx-tn)
+ ;; Compute a pointer to where the stack args go.
+ (inst lea rdi-tn
+ (make-ea :qword :base rbp-tn
+ :disp (frame-byte-offset register-arg-count)))
+ ;; Save ESI, and compute a pointer to where the args come from.
+ (storew rsi-tn rbx-tn (frame-word-offset (+ sp->fp-offset 2)))
+ (inst lea rsi-tn
+ (make-ea :qword :base rbx-tn
+ :disp (frame-byte-offset
+ (+ sp->fp-offset register-arg-count))))
+ ;; Do the copy.
+ (inst shr rcx-tn n-fixnum-tag-bits) ; make word count
+ (inst std)
+ (inst rep)
+ (inst movs :qword)
+ ;; Restore RSI.
+ (loadw rsi-tn rbx-tn (frame-word-offset (+ sp->fp-offset 2)))
+ ;; Now we have to default the remaining args. Find out how many.
+ (inst sub rax-tn (fixnumize (- nvals register-arg-count)))
+ (inst neg rax-tn)
+ ;; If none, then just blow out of here.
+ (inst jmp :le restore-edi)
+ (inst mov rcx-tn rax-tn)
+ (inst shr rcx-tn n-fixnum-tag-bits) ; word count
+ ;; Load RAX with NIL for fast storing.
+ (inst mov rax-tn nil-value)
+ ;; Do the store.
+ (emit-label default-stack-vals)
+ (inst rep)
+ (inst stos rax-tn)
+ ;; Restore EDI, and reset the stack.
+ (emit-label restore-edi)
+ (loadw rdi-tn rbx-tn (frame-word-offset (+ sp->fp-offset 1)))
+ (inst mov rsp-tn rbx-tn)
+ (inst cld)))))