-REPORTING BUGS
+SBCL uses Launchpad to track bugs. The bug database is available at:
-Bugs can be reported on the help mailing list
- sbcl-help@lists.sourceforge.net
-or on the development mailing list
- sbcl-devel@lists.sourceforge.net
+ https://bugs.launchpad.net/sbcl
-Please include enough information in a bug report that someone reading
-it can reproduce the problem, i.e. don't write
- Subject: apparent bug in PRINT-OBJECT (or *PRINT-LENGTH*?)
- PRINT-OBJECT doesn't seem to work with *PRINT-LENGTH*. Is this a bug?
-but instead
- Subject: apparent bug in PRINT-OBJECT (or *PRINT-LENGTH*?)
- In sbcl-1.2.3 running under OpenBSD 4.5 on my Alpha box, when
- I compile and load the file
- (DEFSTRUCT (FOO (:PRINT-OBJECT (LAMBDA (X Y)
- (LET ((*PRINT-LENGTH* 4))
- (PRINT X Y)))))
- X Y)
- then at the command line type
- (MAKE-FOO)
- the program loops endlessly instead of printing the object.
+Reporting bugs there requires registering at Launchpad. However, bugs
+can also be reported on the mailing list sbcl-bugs, which is
+moderated but does _not_ require subscribing. Simply send email to
+ sbcl-bugs@lists.sourceforge.net
-NOTES:
+and the bug will be checked and added to Launchpad by SBCL maintainers.
-There is also some information on bugs in the manual page and
-in the TODO file. Eventually more such information may move here.
+Historical note: before Launchpad was adopted this file contained a
+list of currently open bugs. If you run into an SBCL bug number in the
+range 1-431 inclusive, it refers to that list.
-The gaps in the number sequence belong to old bug descriptions which
-have gone away (typically because they were fixed, but sometimes for
-other reasons, e.g. because they were moved elsewhere).
-
-
-KNOWN BUGS OF NO SPECIAL CLASS:
-
-2:
- DEFSTRUCT almost certainly should overwrite the old LAYOUT information
- instead of just punting when a contradictory structure definition
- is loaded. As it is, if you redefine DEFSTRUCTs in a way which
- changes their layout, you probably have to rebuild your entire
- program, even if you know or guess enough about the internals of
- SBCL to wager that this (undefined in ANSI) operation would be safe.
-
-3:
- ANSI specifies that a type mismatch in a structure slot
- initialization value should not cause a warning.
-WORKAROUND:
- This one might not be fixed for a while because while we're big
- believers in ANSI compatibility and all, (1) there's no obvious
- simple way to do it (short of disabling all warnings for type
- mismatches everywhere), and (2) there's a good portable
- workaround, and (3) by their own reasoning, it looks as though
- ANSI may have gotten it wrong. ANSI justifies this specification
- by saying
- The restriction against issuing a warning for type mismatches
- between a slot-initform and the corresponding slot's :TYPE
- option is necessary because a slot-initform must be specified
- in order to specify slot options; in some cases, no suitable
- default may exist.
- However, in SBCL (as in CMU CL or, for that matter, any compiler
- which really understands Common Lisp types) a suitable default
- does exist, in all cases, because the compiler understands the
- concept of functions which never return (i.e. has return type NIL).
- Thus, as a portable workaround, you can use a call to some
- known-never-to-return function as the default. E.g.
- (DEFSTRUCT FOO
- (BAR (ERROR "missing :BAR argument")
- :TYPE SOME-TYPE-TOO-HAIRY-TO-CONSTRUCT-AN-INSTANCE-OF))
- or
- (DECLAIM (FTYPE (FUNCTION () NIL) MISSING-ARG))
- (DEFUN REQUIRED-ARG () ; workaround for SBCL non-ANSI slot init typing
- (ERROR "missing required argument"))
- (DEFSTRUCT FOO
- (BAR (REQUIRED-ARG) :TYPE TRICKY-TYPE-OF-SOME-SORT)
- (BLETCH (REQUIRED-ARG) :TYPE TRICKY-TYPE-OF-SOME-SORT)
- (N-REFS-SO-FAR 0 :TYPE (INTEGER 0)))
- Such code should compile without complaint and work correctly either
- on SBCL or on any other completely compliant Common Lisp system.
-
-6:
- bogus warnings about undefined functions for magic functions like
- SB!C::%%DEFUN and SB!C::%DEFCONSTANT when cross-compiling files
- like src/code/float.lisp. Fixing this will probably require
- straightening out enough bootstrap consistency issues that
- the cross-compiler can run with *TYPE-SYSTEM-INITIALIZED*.
- Instead, the cross-compiler runs in a slightly flaky state
- which is sane enough to compile SBCL itself, but which is
- also unstable in several ways, including its inability
- to really grok function declarations.
-
-7:
- The "compiling top-level form:" output ought to be condensed.
- Perhaps any number of such consecutive lines ought to turn into a
- single "compiling top-level forms:" line.
-
-10:
- The way that the compiler munges types with arguments together
- with types with no arguments (in e.g. TYPE-EXPAND) leads to
- weirdness visible to the user:
- (DEFTYPE FOO () 'FIXNUM)
- (TYPEP 11 'FOO) => T
- (TYPEP 11 '(FOO)) => T, which seems weird
- (TYPEP 11 'FIXNUM) => T
- (TYPEP 11 '(FIXNUM)) signals an error, as it should
- The situation is complicated by the presence of Common Lisp types
- like UNSIGNED-BYTE (which can either be used in list form or alone)
- so I'm not 100% sure that the behavior above is actually illegal.
- But I'm 90+% sure, and the following related behavior,
- (TYPEP 11 'AND) => T
- treating the bare symbol AND as equivalent to '(AND), is specifically
- forbidden (by the ANSI specification of the AND type).
-
-11:
- It would be nice if the
- caught ERROR:
- (during macroexpansion)
- said what macroexpansion was at fault, e.g.
- caught ERROR:
- (during macroexpansion of IN-PACKAGE,
- during macroexpansion of DEFFOO)
-
-15:
- (SUBTYPEP '(FUNCTION (T BOOLEAN) NIL)
- '(FUNCTION (FIXNUM FIXNUM) NIL)) => T, T
- (Also, when this is fixed, we can enable the code in PROCLAIM which
- checks for incompatible FTYPE redeclarations.)
-
-19:
- (I *think* this is a bug. It certainly seems like strange behavior. But
- the ANSI spec is scary, dark, and deep.. -- WHN)
- (FORMAT NIL "~,1G" 1.4) => "1. "
- (FORMAT NIL "~3,1G" 1.4) => "1. "
-
-20:
- from Marco Antoniotti on cmucl-imp mailing list 1 Mar 2000:
- (defclass ccc () ())
- (setf (find-class 'ccc1) (find-class 'ccc))
- (defmethod zut ((c ccc1)) 123)
- In sbcl-0.7.1.13, this gives an error,
- There is no class named CCC1.
- DTC's recommended workaround from the mailing list 3 Mar 2000:
- (setf (pcl::find-class 'ccc1) (pcl::find-class 'ccc))
-
-22:
- The ANSI spec, in section "22.3.5.2 Tilde Less-Than-Sign: Logical Block",
- says that an error is signalled if ~W, ~_, ~<...~:>, ~I, or ~:T is used
- inside "~<..~>" (without the colon modifier on the closing syntax).
- However, SBCL doesn't do this:
- * (FORMAT T "~<munge~wegnum~>" 12)
- munge12egnum
- NIL
-
-27:
- Sometimes (SB-EXT:QUIT) fails with
- Argh! maximum interrupt nesting depth (4096) exceeded, exiting
- Process inferior-lisp exited abnormally with code 1
- I haven't noticed a repeatable case of this yet.
-
-31:
- In some cases the compiler believes type declarations on array
- elements without checking them, e.g.
- (DECLAIM (OPTIMIZE (SAFETY 3) (SPEED 1) (SPACE 1)))
- (DEFSTRUCT FOO A B)
- (DEFUN BAR (X)
- (DECLARE (TYPE (SIMPLE-ARRAY CONS 1) X))
- (WHEN (CONSP (AREF X 0))
- (PRINT (AREF X 0))))
- (BAR (VECTOR (MAKE-FOO :A 11 :B 12)))
- prints
- #S(FOO :A 11 :B 12)
- in SBCL 0.6.5 (and also in CMU CL 18b). This does not happen for
- all cases, e.g. the type assumption *is* checked if the array
- elements are declared to be of some structure type instead of CONS.
-
-32:
- The printer doesn't report closures very well. This is true in
- CMU CL 18b as well:
- (PRINT #'CLASS-NAME)
- gives
- #<Closure Over Function "DEFUN STRUCTURE-SLOT-ACCESSOR" {134D1A1}>
- It would be nice to make closures have a settable name slot,
- and make things like DEFSTRUCT and FLET, which create closures,
- set helpful values into this slot.
-
-33:
- And as long as we're wishing, it would be awfully nice if INSPECT could
- also report on closures, telling about the values of the bound variables.
-
-35:
- The compiler assumes that any time a function of declared FTYPE
- doesn't signal an error, its arguments were of the declared type.
- E.g. compiling and loading
- (DECLAIM (OPTIMIZE (SAFETY 3)))
- (DEFUN FACTORIAL (X) (GAMMA (1+ X)))
- (DEFUN GAMMA (X) X)
- (DECLAIM (FTYPE (FUNCTION (UNSIGNED-BYTE)) FACTORIAL))
- (DEFUN FOO (X)
- (COND ((> (FACTORIAL X) 1.0E6)
- (FORMAT T "too big~%"))
- ((INTEGERP X)
- (FORMAT T "exactly ~S~%" (FACTORIAL X)))
- (T
- (FORMAT T "approximately ~S~%" (FACTORIAL X)))))
- then executing
- (FOO 1.5)
- will cause the INTEGERP case to be selected, giving bogus output a la
- exactly 1.33..
- This violates the "declarations are assertions" principle.
- According to the ANSI spec, in the section "System Class FUNCTION",
- this is a case of "lying to the compiler", but the lying is done
- by the code which calls FACTORIAL with non-UNSIGNED-BYTE arguments,
- not by the unexpectedly general definition of FACTORIAL. In any case,
- "declarations are assertions" means that lying to the compiler should
- cause an error to be signalled, and should not cause a bogus
- result to be returned. Thus, the compiler should not assume
- that arbitrary functions check their argument types. (It might
- make sense to add another flag (CHECKED?) to DEFKNOWN to
- identify functions which *do* check their argument types.)
- (Also, verify that the compiler handles declared function
- return types as assertions.)
-
-41:
- TYPEP of VALUES types is sometimes implemented very inefficiently, e.g. in
- (DEFTYPE INDEXOID () '(INTEGER 0 1000))
- (DEFUN FOO (X)
- (DECLARE (TYPE INDEXOID X))
- (THE (VALUES INDEXOID)
- (VALUES X)))
- where the implementation of the type check in function FOO
- includes a full call to %TYPEP. There are also some fundamental problems
- with the interpretation of VALUES types (inherited from CMU CL, and
- from the ANSI CL standard) as discussed on the cmucl-imp@cons.org
- mailing list, e.g. in Robert Maclachlan's post of 21 Jun 2000.
-
-42:
- The definitions of SIGCONTEXT-FLOAT-REGISTER and
- %SET-SIGCONTEXT-FLOAT-REGISTER in x86-vm.lisp say they're not
- supported on FreeBSD because the floating point state is not saved,
- but at least as of FreeBSD 4.0, the floating point state *is* saved,
- so they could be supported after all. Very likely
- SIGCONTEXT-FLOATING-POINT-MODES could now be supported, too.
-
-43:
- (as discussed by Douglas Crosher on the cmucl-imp mailing list ca.
- Aug. 10, 2000): CMUCL currently interprets 'member as '(member); same
- issue with 'union, 'and, 'or etc. So even though according to the
- ANSI spec, bare 'MEMBER, 'AND, and 'OR are not legal types, CMUCL
- (and now SBCL) interpret them as legal types.
-
-44:
- ANSI specifies DEFINE-SYMBOL-MACRO, but it's not defined in SBCL.
- CMU CL added it ca. Aug 13, 2000, after some discussion on the mailing
- list, and it is probably possible to use substantially the same
- patches to add it to SBCL.
-
-45:
- a slew of floating-point-related errors reported by Peter Van Eynde
- on July 25, 2000:
- b: SBCL's value for LEAST-POSITIVE-SHORT-FLOAT is bogus, and
- should probably be 1.4012985e-45. In SBCL,
- (/ LEAST-POSITIVE-SHORT-FLOAT 2) returns a number smaller
- than LEAST-POSITIVE-SHORT-FLOAT. Similar problems
- exist for LEAST-NEGATIVE-SHORT-FLOAT, LEAST-POSITIVE-LONG-FLOAT,
- and LEAST-NEGATIVE-LONG-FLOAT.
- c: Many expressions generate floating infinity on x86/Linux:
- (/ 1 0.0)
- (/ 1 0.0d0)
- (EXPT 10.0 1000)
- (EXPT 10.0d0 1000)
- PVE's regression tests want them to raise errors. sbcl-0.7.0.5
- on x86/Linux generates the infinities instead. That might or
- might not be conforming behavior, but it's also inconsistent,
- which is almost certainly wrong. (Inconsistency: (/ 1 0.0)
- should give the same result as (/ 1.0 0.0), but instead (/ 1 0.0)
- generates SINGLE-FLOAT-POSITIVE-INFINITY and (/ 1.0 0.0)
- signals an error.
- d: (in section12.erg) various forms a la
- (FLOAT 1 DOUBLE-FLOAT-EPSILON)
- don't give the right behavior.
-
-46:
- type safety errors reported by Peter Van Eynde July 25, 2000:
- a: (COERCE (QUOTE (A B C)) (QUOTE (VECTOR * 4)))
- => #(A B C)
- In general lengths of array type specifications aren't
- checked by COERCE, so it fails when the spec is
- (VECTOR 4), (STRING 2), (SIMPLE-BIT-VECTOR 3), or whatever.
- b: CONCATENATE has the same problem of not checking the length
- of specified output array types. MAKE-SEQUENCE and MAP and
- MERGE also have the same problem.
- c: (COERCE 'AND 'FUNCTION) returns something related to
- (MACRO-FUNCTION 'AND), but ANSI says it should raise an error.
- f: (FLOAT-RADIX 2/3) should signal an error instead of
- returning 2.
- g: (LOAD "*.lsp") should signal FILE-ERROR.
- h: (MAKE-CONCATENATED-STREAM (MAKE-STRING-OUTPUT-STREAM))
- should signal TYPE-ERROR.
- i: MAKE-TWO-WAY-STREAM doesn't check that its arguments can
- be used for input and output as needed. It should fail with
- TYPE-ERROR when handed e.g. the results of
- MAKE-STRING-INPUT-STREAM or MAKE-STRING-OUTPUT-STREAM in
- the inappropriate positions, but doesn't.
- j: (PARSE-NAMESTRING (COERCE (LIST #\f #\o #\o (CODE-CHAR 0) #\4 #\8)
- (QUOTE STRING)))
- should probably signal an error instead of making a pathname with
- a null byte in it.
- k: READ-BYTE is supposed to signal TYPE-ERROR when its argument is
- not a binary input stream, but instead cheerfully reads from
- character streams, e.g. (MAKE-STRING-INPUT-STREAM "abc").
-
-47:
- DEFCLASS bugs reported by Peter Van Eynde July 25, 2000:
- a: (DEFCLASS FOO () (A B A)) should signal a PROGRAM-ERROR, and
- doesn't.
- b: (DEFCLASS FOO () (A B A) (:DEFAULT-INITARGS X A X B)) should
- signal a PROGRAM-ERROR, and doesn't.
- c: (DEFCLASS FOO07 NIL ((A :ALLOCATION :CLASS :ALLOCATION :CLASS))),
- and other DEFCLASS forms with duplicate specifications in their
- slots, should signal a PROGRAM-ERROR, and doesn't.
- d: (DEFGENERIC IF (X)) should signal a PROGRAM-ERROR, but instead
- causes a COMPILER-ERROR.
-
-48:
- SYMBOL-MACROLET bugs reported by Peter Van Eynde July 25, 2000:
- a: (SYMBOL-MACROLET ((T TRUE)) ..) should probably signal
- PROGRAM-ERROR, but SBCL accepts it instead.
- b: SYMBOL-MACROLET should refuse to bind something which is
- declared as a global variable, signalling PROGRAM-ERROR.
- c: SYMBOL-MACROLET should signal PROGRAM-ERROR if something
- it binds is declared SPECIAL inside.
-
-50:
- type system errors reported by Peter Van Eynde July 25, 2000:
- c: (SUBTYPEP '(INTEGER (0) (0)) 'NIL) dies with nested errors.
- d: In general, the system doesn't like '(INTEGER (0) (0)) -- it
- blows up at the level of SPECIFIER-TYPE with
- "Lower bound (0) is greater than upper bound (0)." Probably
- SPECIFIER-TYPE should return the NIL type instead.
- g: The type system isn't all that smart about relationships
- between hairy types, as shown in the type.erg test results,
- e.g. (SUBTYPEP 'CONS '(NOT ATOM)) => NIL, NIL.
-
-51:
- miscellaneous errors reported by Peter Van Eynde July 25, 2000:
- a: (PROGN
- (DEFGENERIC FOO02 (X))
- (DEFMETHOD FOO02 ((X NUMBER)) T)
- (LET ((M (FIND-METHOD (FUNCTION FOO02)
- NIL
- (LIST (FIND-CLASS (QUOTE NUMBER))))))
- (REMOVE-METHOD (FUNCTION FOO02) M)
- (DEFGENERIC FOO03 (X))
- (ADD-METHOD (FUNCTION FOO03) M)))
- should give an error, but SBCL allows it.
- b: READ should probably return READER-ERROR, not the bare
- arithmetic error, when input a la "1/0" or "1e1000" causes
- an arithmetic error.
-
-52:
- It has been reported (e.g. by Peter Van Eynde) that there are
- several metaobject protocol "errors". (In order to fix them, we might
- need to document exactly what metaobject protocol specification
- we're following -- the current code is just inherited from PCL.)
-
-54:
- The implementation of #'+ returns its single argument without
- type checking, e.g. (+ "illegal") => "illegal".
-
-58:
- (SUBTYPEP '(AND ZILCH INTEGER) 'ZILCH) => NIL, NIL
- Note: I looked into fixing this in 0.6.11.15, but gave up. The
- problem seems to be that there are two relevant type methods for
- the subtypep operation, HAIRY :COMPLEX-SUBTYPEP-ARG2 and
- INTERSECTION :COMPLEX-SUBTYPEP-ARG1, and only the first is
- called. This could be fixed, but type dispatch is messy and
- confusing enough already, I don't want to complicate it further.
- Perhaps someday we can make CLOS cross-compiled (instead of compiled
- after bootstrapping) so that we don't need to have the type system
- available before CLOS, and then we can rewrite the type methods to
- CLOS methods, and then expressing the solutions to stuff like this
- should become much more straightforward. -- WHN 2001-03-14
-
-60:
- The debugger LIST-LOCATIONS command doesn't work properly.
-
-61:
- Compiling and loading
- (DEFUN FAIL (X) (THROW 'FAIL-TAG X))
- (FAIL 12)
- then requesting a BACKTRACE at the debugger prompt gives no information
- about where in the user program the problem occurred.
-
-62:
- The compiler is supposed to do type inference well enough that
- the declaration in
- (TYPECASE X
- ((SIMPLE-ARRAY SINGLE-FLOAT)
- (LOCALLY
- (DECLARE (TYPE (SIMPLE-ARRAY SINGLE-FLOAT) X))
- ..))
- ..)
- is redundant. However, as reported by Juan Jose Garcia Ripoll for
- CMU CL, it sometimes doesn't. Adding declarations is a pretty good
- workaround for the problem for now, but can't be done by the TYPECASE
- macros themselves, since it's too hard for the macro to detect
- assignments to the variable within the clause.
- Note: The compiler *is* smart enough to do the type inference in
- many cases. This case, derived from a couple of MACROEXPAND-1
- calls on Ripoll's original test case,
- (DEFUN NEGMAT (A)
- (DECLARE (OPTIMIZE SPEED (SAFETY 0)))
- (COND ((TYPEP A '(SIMPLE-ARRAY SINGLE-FLOAT)) NIL
- (LET ((LENGTH (ARRAY-TOTAL-SIZE A)))
- (LET ((I 0) (G2554 LENGTH))
- (DECLARE (TYPE REAL G2554) (TYPE REAL I))
- (TAGBODY
- SB-LOOP::NEXT-LOOP
- (WHEN (>= I G2554) (GO SB-LOOP::END-LOOP))
- (SETF (ROW-MAJOR-AREF A I) (- (ROW-MAJOR-AREF A I)))
- (GO SB-LOOP::NEXT-LOOP)
- SB-LOOP::END-LOOP))))))
- demonstrates the problem; but the problem goes away if the TAGBODY
- and GO forms are removed (leaving the SETF in ordinary, non-looping
- code), or if the TAGBODY and GO forms are retained, but the
- assigned value becomes 0.0 instead of (- (ROW-MAJOR-AREF A I)).
-
-63:
- Paul Werkowski wrote on cmucl-imp@cons.org 2000-11-15
- I am looking into this problem that showed up on the cmucl-help
- list. It seems to me that the "implementation specific environment
- hacking functions" found in pcl/walker.lisp are completely messed
- up. The good thing is that they appear to be barely used within
- PCL and the munged environment object is passed to cmucl only
- in calls to macroexpand-1, which is probably why this case fails.
- SBCL uses essentially the same code, so if the environment hacking
- is screwed up, it affects us too.
-
-64:
- Using the pretty-printer from the command prompt gives funny
- results, apparently because the pretty-printer doesn't know
- about user's command input, including the user's carriage return
- that the user, and therefore the pretty-printer thinks that
- the new output block should start indented 2 or more characters
- rightward of the correct location.
-
-65:
- (probably related to bug #70; maybe related to bug #109)
- As reported by Carl Witty on submit@bugs.debian.org 1999-05-08,
- compiling this file
-(in-package "CL-USER")
-(defun equal-terms (termx termy)
- (labels
- ((alpha-equal-bound-term-lists (listx listy)
- (or (and (null listx) (null listy))
- (and listx listy
- (let ((bindings-x (bindings-of-bound-term (car listx)))
- (bindings-y (bindings-of-bound-term (car listy))))
- (if (and (null bindings-x) (null bindings-y))
- (alpha-equal-terms (term-of-bound-term (car listx))
- (term-of-bound-term (car listy)))
- (and (= (length bindings-x) (length bindings-y))
- (prog2
- (enter-binding-pairs (bindings-of-bound-term (car listx))
- (bindings-of-bound-term (car listy)))
- (alpha-equal-terms (term-of-bound-term (car listx))
- (term-of-bound-term (car listy)))
- (exit-binding-pairs (bindings-of-bound-term (car listx))
- (bindings-of-bound-term (car listy)))))))
- (alpha-equal-bound-term-lists (cdr listx) (cdr listy)))))
-
- (alpha-equal-terms (termx termy)
- (if (and (variable-p termx)
- (variable-p termy))
- (equal-bindings (id-of-variable-term termx)
- (id-of-variable-term termy))
- (and (equal-operators-p (operator-of-term termx) (operator-of-term termy))
- (alpha-equal-bound-term-lists (bound-terms-of-term termx)
- (bound-terms-of-term termy))))))
-
- (or (eq termx termy)
- (and termx termy
- (with-variable-invocation (alpha-equal-terms termx termy))))))
- causes an assertion failure
- The assertion (EQ (C::LAMBDA-TAIL-SET C::CALLER)
- (C::LAMBDA-TAIL-SET (C::LAMBDA-HOME C::CALLEE))) failed.
-
- Bob Rogers reports (1999-07-28 on cmucl-imp@cons.org) a smaller test
- case with the same problem:
-(defun parse-fssp-alignment ()
- ;; Given an FSSP alignment file named by the argument . . .
- (labels ((get-fssp-char ()
- (get-fssp-char))
- (read-fssp-char ()
- (get-fssp-char)))
- ;; Stub body, enough to tickle the bug.
- (list (read-fssp-char)
- (read-fssp-char))))
-
-66:
- ANSI specifies that the RESULT-TYPE argument of CONCATENATE must be
- a subtype of SEQUENCE, but CONCATENATE doesn't check this properly:
- (CONCATENATE 'SIMPLE-ARRAY #(1 2) '(3)) => #(1 2 3)
- This also leads to funny behavior when derived type specifiers
- are used, as originally reported by Milan Zamazal for CMU CL (on the
- Debian bugs mailing list (?) 2000-02-27), then reported by Martin
- Atzmueller for SBCL (2000-10-01 on sbcl-devel@lists.sourceforge.net):
- (DEFTYPE FOO () 'SIMPLE-ARRAY)
- (CONCATENATE 'FOO #(1 2) '(3))
- => #<ARRAY-TYPE SIMPLE-ARRAY> is a bad type specifier for
- sequence functions.
- The derived type specifier FOO should act the same way as the
- built-in type SIMPLE-ARRAY here, but it doesn't. That problem
- doesn't seem to exist for sequence types:
- (DEFTYPE BAR () 'SIMPLE-VECTOR)
- (CONCATENATE 'BAR #(1 2) '(3)) => #(1 2 3)
-
-67:
- As reported by Winton Davies on a CMU CL mailing list 2000-01-10,
- and reported for SBCL by Martin Atzmueller 2000-10-20: (TRACE GETHASH)
- crashes SBCL. In general tracing anything which is used in the
- implementation of TRACE is likely to have the same problem.
-
-68:
- As reported by Daniel Solaz on cmucl-help@cons.org 2000-11-23,
- SXHASH returns the same value for all non-STRUCTURE-OBJECT instances,
- notably including all PCL instances. There's a limit to how much
- SXHASH can do to return unique values for instances, but at least
- it should probably look at the class name, the way that it does
- for STRUCTURE-OBJECTs.
-
-69:
- As reported by Martin Atzmueller on the sbcl-devel list 2000-11-22,
- > There remains one issue, that is a bug in SBCL:
- > According to my interpretation of the spec, the ":" and "@" modifiers
- > should appear _after_ the comma-seperated arguments.
- > Well, SBCL (and CMUCL for that matter) accept
- > (ASSERT (STRING= (FORMAT NIL "~:8D" 1) " 1"))
- > where the correct way (IMHO) should be
- > (ASSERT (STRING= (FORMAT NIL "~8:D" 1) " 1"))
- Probably SBCL should stop accepting the "~:8D"-style format arguments,
- or at least issue a warning.
-
-70:
- (probably related to bug #65; maybe related to bug #109)
- The compiler doesn't like &OPTIONAL arguments in LABELS and FLET
- forms. E.g.
- (DEFUN FIND-BEFORE (ITEM SEQUENCE &KEY (TEST #'EQL))
- (LABELS ((FIND-ITEM (OBJ SEQ TEST &OPTIONAL (VAL NIL))
- (LET ((ITEM (FIRST SEQ)))
- (COND ((NULL SEQ)
- (VALUES NIL NIL))
- ((FUNCALL TEST OBJ ITEM)
- (VALUES VAL SEQ))
- (T
- (FIND-ITEM OBJ (REST SEQ) TEST (NCONC VAL `(,ITEM))))))))
- (FIND-ITEM ITEM SEQUENCE TEST)))
- from David Young's bug report on cmucl-help@cons.org 30 Nov 2000
- causes sbcl-0.6.9 to fail with
- error in function SB-KERNEL:ASSERT-ERROR:
- The assertion (EQ (SB-C::LAMBDA-TAIL-SET SB-C::CALLER)
- (SB-C::LAMBDA-TAIL-SET
- (SB-C::LAMBDA-HOME SB-C::CALLEE))) failed.
-
-71:
- (DECLAIM (OPTIMIZE ..)) doesn't work. E.g. even after
- (DECLAIM (OPTIMIZE (SPEED 3))), things are still optimized with
- the previous SPEED policy. This bug will probably get fixed in
- 0.6.9.x in a general cleanup of optimization policy.
-
-72:
- (DECLAIM (OPTIMIZE ..)) doesn't work properly inside LOCALLY forms.
-
-75:
- As reported by Martin Atzmueller on sbcl-devel 26 Dec 2000,
- ANSI says that WITH-OUTPUT-TO-STRING should have a keyword
- :ELEMENT-TYPE, but in sbcl-0.6.9 this is not defined for
- WITH-OUTPUT-TO-STRING.
-
-78:
- ANSI says in one place that type declarations can be abbreviated even
- when the type name is not a symbol, e.g.
- (DECLAIM ((VECTOR T) *FOOVECTOR*))
- SBCL doesn't support this. But ANSI says in another place that this
- isn't allowed. So it's not clear this is a bug after all. (See the
- e-mail on cmucl-help@cons.org on 2001-01-16 and 2001-01-17 from WHN
- and Pierre Mai.)
-
-79:
- as pointed out by Dan Barlow on sbcl-devel 2000-07-02:
- The PICK-TEMPORARY-FILE-NAME utility used by LOAD-FOREIGN uses
- an easily guessable temporary filename in a way which might open
- applications using LOAD-FOREIGN to hijacking by malicious users
- on the same machine. Incantations for doing this safely are
- floating around the net in various "how to write secure programs
- despite Unix" documents, and it would be good to (1) fix this in
- LOAD-FOREIGN, and (2) hunt for any other code which uses temporary
- files and make it share the same new safe logic.
-
-82:
- Functions are assigned names based on the context in which they're
- defined. This is less than ideal for the functions which are
- used to implement CLOS methods. E.g. the output of
- (DESCRIBE 'PRINT-OBJECT) lists functions like
- #<FUNCTION "DEF!STRUCT (TRACE-INFO (:MAKE-LOAD-FORM-FUN SB-KERNEL:JUST-DUMP-IT-NORMALLY) (:PRINT-OBJECT #))" {1020E49}>
- and
- #<FUNCTION "MACROLET ((FORCE-DELAYED-DEF!METHODS NIL #))" {1242871}>
- It would be better if these functions' names always identified
- them as methods, and identified their generic functions and
- specializers.
-
-83:
- RANDOM-INTEGER-EXTRA-BITS=10 may not be large enough for the RANDOM
- RNG to be high quality near RANDOM-FIXNUM-MAX; it looks as though
- the mean of the distribution can be systematically O(0.1%) wrong.
- Just increasing R-I-E-B is probably not a good solution, since
- it would decrease efficiency more than is probably necessary. Perhaps
- using some sort of accept/reject method would be better.
-
-84:
- (SUBTYPEP '(SATISFIES SOME-UNDEFINED-FUN) NIL)=>NIL,T (should be NIL,NIL)
-
-85:
- Internally the compiler sometimes evaluates
- (sb-kernel:type/= (specifier-type '*) (specifier-type t))
- (I stumbled across this when I added an
- (assert (not (eq type1 *wild-type*)))
- in the NAMED :SIMPLE-= type method.) '* isn't really a type, and
- in a type context should probably be translated to T, and so it's
- probably wrong to ask whether it's equal to the T type and then (using
- the EQ type comparison in the NAMED :SIMPLE-= type method) return NIL.
- (I haven't tried to investigate this bug enough to guess whether
- there might be any user-level symptoms.)
-
-90:
- a latent cross-compilation/bootstrapping bug: The cross-compilation
- host's CL:CHAR-CODE-LIMIT is used in target code in readtable.lisp
- and possibly elsewhere. Instead, we should use the target system's
- CHAR-CODE-LIMIT. This will probably cause problems if we try to
- bootstrap on a system which uses a different value of CHAR-CODE-LIMIT
- than SBCL does.
-
-91:
- (subtypep '(or (integer -1 1)
- unsigned-byte)
- '(or (rational -1 7)
- unsigned-byte
- (integer -1 1))) => NIL,T
- An analogous problem with SINGLE-FLOAT and REAL types was fixed in
- sbcl-0.6.11.22, but some peculiarites of the RATIO type make it
- awkward to generalize the fix to INTEGER and RATIONAL. It's not
- clear what's the best fix. (See the "bug in type handling" discussion
- on cmucl-imp ca. 2001-03-22 and ca. 2001-02-12.)
-
-94a:
- Inconsistencies between derived and declared VALUES return types for
- DEFUN aren't checked very well. E.g. the logic which successfully
- catches problems like
- (declaim (ftype (function (fixnum) float) foo))
- (defun foo (x)
- (declare (type integer x))
- (values x)) ; wrong return type, detected, gives warning, good!
- fails to catch
- (declaim (ftype (function (t) (values t t)) bar))
- (defun bar (x)
- (values x)) ; wrong number of return values, no warning, bad!
- The cause of this is seems to be that (1) the internal function
- VALUES-TYPES-EQUAL-OR-INTERSECT used to make the check handles its
- arguments symmetrically, and (2) when the type checking code was
- written back when when SBCL's code was still CMU CL, the intent
- was that this case
- (declaim (ftype (function (t) t) bar))
- (defun bar (x)
- (values x x)) ; wrong number of return values; should give warning?
- not be warned for, because a two-valued return value is considered
- to be compatible with callers who expects a single value to be
- returned. That intent is probably not appropriate for modern ANSI
- Common Lisp, but fixing this might be complicated because of other
- divergences between auld-style and new-style handling of
- multiple-VALUES types. (Some issues related to this were discussed
- on cmucl-imp at some length sometime in 2000.)
-
-95:
- The facility for dumping a running Lisp image to disk gets confused
- when run without the PURIFY option, and creates an unnecessarily large
- core file (apparently representing memory usage up to the previous
- high-water mark). Moreover, when the file is loaded, it confuses the
- GC, so that thereafter memory usage can never be reduced below that
- level.
-
-96:
- The TRACE facility can't be used on some kinds of functions.
- (Basically, the breakpoint facility was incompletely implemented
- in the X86 port of CMU CL, and hasn't been fixed in SBCL.)
-
-98:
- In sbcl-0.6.11.41 (and in all earlier SBCL, and in CMU
- CL), out-of-line structure slot setters are horribly inefficient
- whenever the type of the slot is declared, because out-of-line
- structure slot setters are implemented as closures to save space,
- so the compiler doesn't compile the type test into code, but
- instead just saves the type in a lexical closure and interprets it
- at runtime.
- A proper solution involves deciding whether it's really worth
- saving space by implementing structure slot accessors as closures.
- (If it's not worth it, the problem vanishes automatically. If it
- is worth it, there are hacks we could use to force type tests to
- be compiled anyway, and even shared. E.g. we could implement
- an EQUAL hash table mapping from types to compiled type tests,
- and save the appropriate compiled type test as part of each lexical
- closure; or we could make the lexical closures be placeholders
- which overwrite their old definition as a lexical closure with
- a new compiled definition the first time that they're called.)
- As a workaround for the problem, #'(SETF FOO) expressions can
- be replaced with (EFFICIENT-SETF-FUNCTION FOO), where
-(defmacro efficient-setf-function (place-function-name)
- (or #+sbcl (and (sb-impl::info :function :accessor-for place-function-name)
- ;; a workaround for the problem, encouraging the
- ;; inline expansion of the structure accessor, so
- ;; that the compiler can optimize its type test
- (let ((new-value (gensym "NEW-VALUE-"))
- (structure-value (gensym "STRUCTURE-VALUE-")))
- `(lambda (,new-value ,structure-value)
- (setf (,place-function-name ,structure-value)
- ,new-value))))
- ;; no problem, can just use the ordinary expansion
- `(function (setf ,place-function-name))))
-
-100:
- There's apparently a bug in CEILING optimization which caused
- Douglas Crosher to patch the CMU CL version. Martin Atzmueller
- applied the patches to SBCL and they didn't seem to cause problems
- (as reported sbcl-devel 2001-05-04). However, since the patches
- modify nontrivial code which was apparently written incorrectly
- the first time around, until regression tests are written I'm not
- comfortable merging the patches in the CVS version of SBCL.
-
-102:
- As reported by Arthur Lemmens sbcl-devel 2001-05-05, ANSI
- requires that SYMBOL-MACROLET refuse to rebind special variables,
- but SBCL doesn't do this. (Also as reported by AL in the same
- message, SBCL depended on this nonconforming behavior to build
- itself, because of the way that **CURRENT-SEGMENT** was implemented.
- As of sbcl-0.6.12.x, this dependence on the nonconforming behavior
- has been fixed, but the nonconforming behavior remains.)
-
-104:
- (DESCRIBE 'SB-ALIEN:DEF-ALIEN-TYPE) reports the macro argument list
- incorrectly:
- DEF-ALIEN-TYPE is
- an external symbol
- in #<PACKAGE "SB-ALIEN">.
- Macro-function: #<FUNCTION "DEF!MACRO DEF-ALIEN-TYPE" {19F4A39}>
- Macro arguments: (#:whole-470 #:environment-471)
- On Sat, May 26, 2001 09:45:57 AM CDT it was compiled from:
- /usr/stuff/sbcl/src/code/host-alieneval.lisp
- Created: Monday, March 12, 2001 07:47:43 AM CST
-
-108:
- (TIME (ROOM T)) reports more than 200 Mbytes consed even for
- a clean, just-started SBCL system. And it seems to be right:
- (ROOM T) can bring a small computer to its knees for a *long*
- time trying to GC afterwards. Surely there's some more economical
- way to implement (ROOM T).
-
-109:
- reported by Martin Atzmueller 2001-06-25; originally from CMU CL bugs
- collection:
- ;;; This file fails to compile.
- ;;; Maybe this bug is related to bugs #65, #70 in the BUGS file.
- (in-package :cl-user)
- (defun tst2 ()
- (labels
- ((eff (&key trouble)
- (eff)
- ;; nil
- ;; Uncomment and it works
- ))
- (eff)))
- In SBCL 0.6.12.42, the problem is
- internal error, failed AVER:
- "(COMMON-LISP:EQ (SB!C::LAMBDA-TAIL-SET SB!C::CALLER)
- (SB!C::LAMBDA-TAIL-SET (SB!C::LAMBDA-HOME SB!C::CALLEE)))"
-
-110:
- reported by Martin Atzmueller 2001-06-25; originally from CMU CL bugs
- collection:
- ;;; The compiler is flushing the argument type test, and the default
- ;;; case in the cond, so that calling with say a fixnum 0 causes a
- ;;; SIGBUS.
- (declaim (optimize (safety 2) (speed 3)))
- (defun tst (x)
- (declare (type (or string stream) x))
- (cond ((typep x 'string) 'string)
- ((typep x 'stream) 'stream)
- (t
- 'none)))
- The symptom in sbcl-0.6.12.42 on OpenBSD is actually (TST 0)=>STREAM
- (not the SIGBUS reported in the comment) but that's broken too;
- type declarations are supposed to be treated as assertions unless
- SAFETY 0, so we should be getting a TYPE-ERROR.
-
-113:
- reported by Martin Atzmueller 2001-06-25; originally from CMU CL bugs
- collection:
- (in-package :cl-user)
- ;;; From: David Gadbois <gadbois@cyc.com>
- ;;;
- ;;; Logical pathnames aren't externalizable.
- ;;; Test case:
- (let ((tempfile "/tmp/test.lisp"))
- (setf (logical-pathname-translations "XXX")
- '(("XXX:**;*.*" "/tmp/**/*.*")))
- (with-open-file (out tempfile :direction :output)
- (write-string "(defvar *path* #P\"XXX:XXX;FOO.LISP\")" out))
- (compile-file tempfile))
- The error message in sbcl-0.6.12.42 is
- ; caught ERROR:
- ; (while making load form for #<SB-IMPL::LOGICAL-HOST "XXX">)
- ; A logical host can't be dumped as a constant: #<SB-IMPL::LOGICAL-HOST "XXX">
-
-115:
- reported by Martin Atzmueller 2001-06-25; originally from CMU CL bugs
- collection:
- (in-package :cl-user)
- ;;; The following invokes a compiler error.
- (declaim (optimize (speed 2) (debug 3)))
- (defun tst ()
- (flet ((m1 ()
- (unwind-protect nil)))
- (if (catch nil)
- (m1)
- (m1))))
- The error message in sbcl-0.6.12.42 is
- internal error, failed AVER:
- "(COMMON-LISP:EQ (SB!C::TN-ENVIRONMENT SB!C:TN) SB!C::TN-ENV)"
-
-117:
- When the compiler inline expands functions, it may be that different
- kinds of return values are generated from different code branches.
- E.g. an inline expansion of POSITION generates integer results
- from one branch, and NIL results from another. When that inline
- expansion is used in a context where only one of those results
- is acceptable, e.g.
- (defun foo (x)
- (aref *a1* (position x *a2*)))
- and the compiler can't prove that the unacceptable branch is
- never taken, then bogus type mismatch warnings can be generated.
- If you need to suppress the type mismatch warnings, you can
- suppress the inline expansion,
- (defun foo (x)
- #+sbcl (declare (notinline position)) ; to suppress bug 117 bogowarnings
- (aref *a1* (position x *a2*)))
- or, sometimes, suppress them by declaring the result to be of an
- appropriate type,
- (defun foo (x)
- (aref *a1* (the integer (position x *a2*))))
-
- This is not a new compiler problem in 0.7.0, but the new compiler
- transforms for FIND, POSITION, FIND-IF, and POSITION-IF make it
- more conspicuous. If you don't need performance from these functions,
- and the bogus warnings are a nuisance for you, you can return to
- your pre-0.7.0 state of grace with
- #+sbcl (declaim (notinline find position find-if position-if)) ; bug 117..
-
-118:
- as reported by Eric Marsden on cmucl-imp@cons.org 2001-08-14:
- (= (FLOAT 1 DOUBLE-FLOAT-EPSILON)
- (+ (FLOAT 1 DOUBLE-FLOAT-EPSILON) DOUBLE-FLOAT-EPSILON)) => T
- when of course it should be NIL. (He says it only fails for X86,
- not SPARC; dunno about Alpha.)
-
- Also, "the same problem exists for LONG-FLOAT-EPSILON,
- DOUBLE-FLOAT-NEGATIVE-EPSILON, LONG-FLOAT-NEGATIVE-EPSILON (though
- for the -negative- the + is replaced by a - in the test)."
-
- Raymond Toy comments that this is tricky on the X86 since its FPU
- uses 80-bit precision internally.
-
-120a:
- The compiler incorrectly figures the return type of
- (DEFUN FOO (FRAME UP-FRAME)
- (IF (OR (NOT FRAME)
- T)
- FRAME
- "BAR"))
- as NIL.
-
- This problem exists in CMU CL 18c too. When I reported it on
- cmucl-imp@cons.org, Raymond Toy replied 23 Aug 2001 with
- a partial explanation, but no fix has been found yet.
-
-120b:
- Even in sbcl-0.pre7.x, which is supposed to be free of the old
- non-ANSI behavior of treating the function return type inferred
- from the current function definition as a declaration of the
- return type from any function of that name, the return type of NIL
- is attached to FOO in 120a above, and used to optimize code which
- calls FOO.
-
-122:
- There was some sort of screwup in handling of
- (IF (NOT (IGNORE-ERRORS ..))). E.g.
- (defun foo1i ()
- (if (not (ignore-errors
- (make-pathname :host "foo" :directory "!bla" :name "bar")))
- (print "ok")
- (error "notunlessnot")))
- The (NOT (IGNORE-ERRORS ..)) form evaluates to T, so this should be
- printing "ok", but instead it's going to the ERROR. This problem
- seems to've been introduced by MNA's HANDLER-CASE patch (sbcl-devel
- 2001-07-17) and as a workaround (put in sbcl-0.pre7.14.flaky4.12)
- I reverted back to the old weird HANDLER-CASE code. However, I
- think the problem looks like a compiler bug in handling RETURN-FROM,
- so I left the MNA-patched code in HANDLER-CASE (suppressed with
- #+NIL) and I'd like to go back to see whether this really is
- a compiler bug before I delete this BUGS entry.
-
-123:
- The *USE-IMPLEMENTATION-TYPES* hack causes bugs, particularly
- (IN-PACKAGE :SB-KERNEL)
- (TYPE= (SPECIFIER-TYPE '(VECTOR T))
- (SPECIFIER-TYPE '(VECTOR UNDEFTYPE)))
- Then because of this, the compiler bogusly optimizes
- (TYPEP #(11) '(SIMPLE-ARRAY UNDEF-TYPE 1))
- to T. Unfortunately, just setting *USE-IMPLEMENTATION-TYPES* to
- NIL around sbcl-0.pre7.14.flaky4.12 didn't work: the compiler complained
- about type mismatches (probably harmlessly, another instance of bug 117);
- and then cold init died with a segmentation fault.
-
-124:
- As of version 0.pre7.14, SBCL's implementation of MACROLET makes
- the entire lexical environment at the point of MACROLET available
- in the bodies of the macroexpander functions. In particular, it
- allows the function bodies (which run at compile time) to try to
- access lexical variables (which are only defined at runtime).
- It doesn't even issue a warning, which is bad.
-
- The SBCL behavior arguably conforms to the ANSI spec (since the
- spec says that the behavior is undefined, ergo anything conforms).
- However, it would be better to issue a compile-time error.
- Unfortunately I (WHN) don't see any simple way to detect this
- condition in order to issue such an error, so for the meantime
- SBCL just does this weird broken "conforming" thing.
-
- The ANSI standard says, in the definition of the special operator
- MACROLET,
- The macro-expansion functions defined by MACROLET are defined
- in the lexical environment in which the MACROLET form appears.
- Declarations and MACROLET and SYMBOL-MACROLET definitions affect
- the local macro definitions in a MACROLET, but the consequences
- are undefined if the local macro definitions reference any
- local variable or function bindings that are visible in that
- lexical environment.
- Then it seems to contradict itself by giving the example
- (defun foo (x flag)
- (macrolet ((fudge (z)
- ;The parameters x and flag are not accessible
- ; at this point; a reference to flag would be to
- ; the global variable of that name.
- ` (if flag (* ,z ,z) ,z)))
- ;The parameters x and flag are accessible here.
- (+ x
- (fudge x)
- (fudge (+ x 1)))))
- The comment "a reference to flag would be to the global variable
- of the same name" sounds like good behavior for the system to have.
- but actual specification quoted above says that the actual behavior
- is undefined.
-
-125:
- (as reported by Gabe Garza on cmucl-help 2001-09-21)
- (defvar *tmp* 3)
- (defun test-pred (x y)
- (eq x y))
- (defun test-case ()
- (let* ((x *tmp*)
- (func (lambda () x)))
- (print (eq func func))
- (print (test-pred func func))
- (delete func (list func))))
- Now calling (TEST-CASE) gives output
- NIL
- NIL
- (#<FUNCTION {500A9EF9}>)
- Evidently Python thinks of the lambda as a code transformation so
- much that it forgets that it's also an object.
-
-126:
- (fixed in 0.pre7.41)
-
-127:
- The DEFSTRUCT section of the ANSI spec, in the :CONC-NAME section,
- specifies a precedence rule for name collisions between slot accessors of
- structure classes related by inheritance. As of 0.7.0, SBCL still
- doesn't follow it.
-
-129:
- insufficient syntax checking in MACROLET:
- (defun foo (x)
- (macrolet ((defmacro bar (z) `(+ z z)))
- (bar x)))
- shouldn't compile without error (because of the extra DEFMACRO symbol).
-
-131:
- As of sbcl-0.pre7.86.flaky7.3, the cross-compiler, and probably
- the CL:COMPILE function (which is based on the same %COMPILE
- mechanism) get confused by
-(defun sxhash (x)
- (labels ((sxhash-number (x)
- (etypecase x
- (fixnum (sxhash x)) ; through DEFTRANSFORM
- (integer (sb!bignum:sxhash-bignum x))
- (single-float (sxhash x)) ; through DEFTRANSFORM
- (double-float (sxhash x)) ; through DEFTRANSFORM
- #!+long-float (long-float (error "stub: no LONG-FLOAT"))
- (ratio (let ((result 127810327))
- (declare (type fixnum result))
- (mixf result (sxhash-number (numerator x)))
- (mixf result (sxhash-number (denominator x)))
- result))
- (complex (let ((result 535698211))
- (declare (type fixnum result))
- (mixf result (sxhash-number (realpart x)))
- (mixf result (sxhash-number (imagpart x)))
- result))))
- (sxhash-recurse (x &optional (depthoid +max-hash-depthoid+))
- (declare (type index depthoid))
- (typecase x
- (list
- (if (plusp depthoid)
- (mix (sxhash-recurse (car x) (1- depthoid))
- (sxhash-recurse (cdr x) (1- depthoid)))
- 261835505))
- (instance
- (if (typep x 'structure-object)
- (logxor 422371266
- (sxhash ; through DEFTRANSFORM
- (class-name (layout-class (%instance-layout x)))))
- 309518995))
- (symbol (sxhash x)) ; through DEFTRANSFORM
- (number (sxhash-number x))
- (array
- (typecase x
- (simple-string (sxhash x)) ; through DEFTRANSFORM
- (string (%sxhash-substring x))
- (bit-vector (let ((result 410823708))
- (declare (type fixnum result))
- (dotimes (i (min depthoid (length x)))
- (mixf result (aref x i)))
- result))
- (t (logxor 191020317 (sxhash (array-rank x))))))
- (character
- (logxor 72185131
- (sxhash (char-code x)))) ; through DEFTRANSFORM
- (t 42))))
- (sxhash-recurse x)))
- complaining "function called with two arguments, but wants exactly
- one" about SXHASH-RECURSE. (This might not be strictly a new bug,
- since IIRC post-fork CMU CL has also had problems with &OPTIONAL
- arguments in FLET/LABELS: it might be an old Python bug which is
- only exercised by the new arrangement of the SBCL compiler.)
-
-135:
- Ideally, uninterning a symbol would allow it, and its associated
- FDEFINITION and PROCLAIM data, to be reclaimed by the GC. However,
- at least as of sbcl-0.7.0, this isn't the case. Information about
- FDEFINITIONs and PROCLAIMed properties is stored in globaldb.lisp
- essentially in ordinary (non-weak) hash tables keyed by symbols.
- Thus, once a system has an entry in this system, it tends to live
- forever, even when it is uninterned and all other references to it
- are lost.
-
-136:
- (reported by Arnaud Rouanet on cmucl-imp 2001-12-18)
- (defmethod foo ((x integer))
- x)
- (defmethod foo :around ((x integer))
- (let ((x (1+ x)))
- (call-next-method)))
- Now (FOO 3) should return 3, but instead it returns 4.
-
-137:
- (SB-DEBUG:BACKTRACE) output should start with something
- including the name BACKTRACE, not (as in 0.pre7.88)
- just "0: (\"hairy arg processor\" ...)". Until about
- sbcl-0.pre7.109, the names in BACKTRACE were all screwed
- up compared to the nice useful names in sbcl-0.6.13.
- Around sbcl-0.pre7.109, they were mostly fixed by using
- NAMED-LAMBDA to implement DEFUN. However, there are still
- some screwups left, e.g. as of sbcl-0.pre7.109, there are
- still some functions named "hairy arg processor" and
- "SB-INT:&MORE processor".
-
-140:
- (reported by Alexey Dejneka sbcl-devel 2002-01-03)
-
- SUBTYPEP does not work well with redefined classes:
- ---
- * (defclass a () ())
- #<STANDARD-CLASS A>
- * (defclass b () ())
- #<STANDARD-CLASS B>
- * (subtypep 'b 'a)
- NIL
- T
- * (defclass b (a) ())
- #<STANDARD-CLASS B>
- * (subtypep 'b 'a)
- T
- T
- * (defclass b () ())
- #<STANDARD-CLASS B>
-
- ;;; And now...
- * (subtypep 'b 'a)
- T
- T
-
-141:
- Pretty-printing nested backquotes doesn't work right, as
- reported by Alexey Dejneka sbcl-devel 2002-01-13:
- * '``(FOO ,@',@S)
- ``(FOO SB-IMPL::BACKQ-COMMA-AT S)
- * (lisp-implementation-version)
- "0.pre7.129"
-
-142:
- (as reported by Lynn Quam on cmucl-imp ca. 2002-01-16)
- %NATURALIZE-C-STRING conses a lot, like 16 bytes per byte
- of the naturalized string. We could probably port the patches
- from the cmucl-imp mailing list.
-
-143:
- (reported by Jesse Bouwman 2001-10-24 through the unfortunately
- prominent SourceForge web/db bug tracking system, which is
- unfortunately not a reliable way to get a timely response from
- the SBCL maintainers)
- In the course of trying to build a test case for an
- application error, I encountered this behavior:
- If you start up sbcl, and then lay on CTRL-C for a
- minute or two, the lisp process will eventually say:
- %PRIMITIVE HALT called; the party is over.
- and throw you into the monitor. If I start up lisp,
- attach to the process with strace, and then do the same
- (abusive) thing, I get instead:
- access failure in heap page not marked as write-protected
- and the monitor again. I don't know enough to have the
- faintest idea of what is going on here.
- This is with sbcl 6.12, uname -a reports:
- Linux prep 2.2.19 #4 SMP Tue Apr 24 13:59:52 CDT 2001 i686 unknown
- I (WHN) have verified that the same thing occurs on sbcl-0.pre7.141
- under OpenBSD 2.9 on my X86 laptop. Do be patient when you try it:
- it took more than two minutes (but less than five) for me.
-
-144:
- (This was once known as IR1-4, but it lived on even after the
- IR1 interpreter went to the big bit bucket in the sky.)
- The system accepts DECLAIM in most places where DECLARE would be
- accepted, without even issuing a warning. ANSI allows this, but since
- it's fairly easy to mistype DECLAIM instead of DECLARE, and the
- meaning is rather different, and it's unlikely that the user
- has a good reason for doing DECLAIM not at top level, it would be
- good to issue a STYLE-WARNING when this happens. A possible
- fix would be to issue STYLE-WARNINGs for DECLAIMs not at top level,
- or perhaps to issue STYLE-WARNINGs for any EVAL-WHEN not at top level.
- [This is considered an IR1-interpreter-related bug because until
- EVAL-WHEN is rewritten, which won't happen until after the IR1
- interpreter is gone, the system's notion of what's a top-level form
- and what's not will remain too confused to fix this problem.]
-
-145:
- ANSI allows types `(COMPLEX ,FOO) to use very hairy values for
- FOO, e.g. (COMPLEX (AND REAL (SATISFIES ODDP))). The old CMU CL
- COMPLEX implementation didn't deal with this, and hasn't been
- upgraded to do so. (This doesn't seem to be a high priority
- conformance problem, since seems hard to construct useful code
- where it matters.)
-
-146:
- Floating point errors are reported poorly. E.g. on x86 OpenBSD
- with sbcl-0.7.1,
- * (expt 2.0 12777)
- debugger invoked on condition of type SB-KERNEL:FLOATING-POINT-EXCEPTION:
- An arithmetic error SB-KERNEL:FLOATING-POINT-EXCEPTION was signalled.
- No traps are enabled? How can this be?
- It should be possible to be much more specific (overflow, division
- by zero, etc.) and of course the "How can this be?" should be fixable.
-
-147:
- (reported by Alexey Dejneka sbcl-devel 2002-01-28)
- Compiling a file containing
- (deftype digit () '(member #\1))
- (defun parse-num (string ind)
- (flet ((digs ()
- (let (old-index)
- (if (and (< ind ind)
- (typep (char string ind) 'digit))
- nil))))))
- in sbcl-0.7.1 causes the compiler to fail with
- internal error, failed AVER: "(= (LENGTH (BLOCK-SUCC CALL-BLOCK)) 1)"
- This problem seems to have been introduced by the sbcl-0.pre7.* compiler
- changes, since 0.pre7.73 and 0.6.13 don't suffer from it. A related
- test case is
- (defun parse-num (index)
- (let (num x)
- (flet ((digs ()
- (setq num index))
- (z ()
- (let ()
- (setq x nil))))
- (when (and (digs) (digs)) x))))
- In sbcl-0.7.1, this second test case failed with the same
- internal error, failed AVER: "(= (LENGTH (BLOCK-SUCC CALL-BLOCK)) 1)"
- After the APD patches in sbcl-0.7.1.2 (new consistency check in
- TARGET-IF-DESIRABLE, plus a fix in meta-vmdef.lisp to keep the
- new consistency check from failing routinely) this second test case
- failed in FIND-IN-PHYSENV instead. Fixes in sbcl-0.7.1.3 (not
- closing over unreferenced variables) made this second test case
- compile without error, but the original test case still fails.
-
- Another way to get rid of the DEFTYPE without changing the symptom
- of the bug is
- (defvar *ch*)
- (defun parse-num (string ind)
- (flet ((digs ()
- (let ()
- (if (and (< ind ind)
- (sb-int:memq *ch* '(#\1)))
- nil))))))
- In sbcl-0.7.1.3, this fails with
- internal error, failed AVER: "(= (LENGTH (BLOCK-SUCC CALL-BLOCK)) 1)"
- The problem occurs while the inline expansion of MEMQ,
- #<LAMBDA :%DEBUG-NAME "varargs entry point for SB-C::.ANONYMOUS.">
- is being LET-converted after having its second REF deleted, leaving
- it with only one entry in LEAF-REFS.
-
-148:
- In sbcl-0.7.1.3 on x86, COMPILE-FILE on the file
- (in-package :cl-user)
- (defvar *thing*)
- (defvar *zoom*)
- (defstruct foo bar bletch)
- (defun %zeep ()
- (labels ((kidify1 (kid)
- )
- (kid-frob (kid)
- (if *thing*
- (setf sweptm
- (m+ (frobnicate kid)
- sweptm))
- (kidify1 kid))))
- (declare (inline kid-frob))
- (map nil
- #'kid-frob
- (the simple-vector (foo-bar perd)))))
- fails with
- debugger invoked on condition of type TYPE-ERROR:
- The value NIL is not of type SB-C::NODE.
- The location of this failure has moved around as various related
- issues were cleaned up. As of sbcl-0.7.1.9, it occurs in
- NODE-BLOCK called by LAMBDA-COMPONENT called by IR2-CONVERT-CLOSURE.
-
-150:
- In sbcl-0.7.1.15, compiling this code
- (let* ()
- (flet ((wufn () (glorp table1 4.9)))
- (gleep *uustk* #'wufn "#1" (list)))
- (if (eql (lo foomax 3.2))
- (values)
- (error "not ~S" '(eql (lo foomax 3.2))))
- (values))
- causes a failure in SB-C::ADD-TEST-CONSTRAINTS:
- The value NIL is not of type SB-C::CONTINUATION.
- other notes:
- * The problem appears to be tied to the way that EQL is given only
- one argument, and goes away when we give EQL a second argument.
- * CMU CL 18c has this problem too, exercised by
- (compile nil
- '(lambda ()
- (let* ()
- (flet ((wufn () (glorp table1 4.9)))
- (gleep *uustk* #'wufn "#1" (list)))
- (if (eql (lo foomax 3.2))
- (values)
- (error "not ~S" '(eql (lo foomax 3.2))))
- (values))))
-
-151:
- From the ANSI description of GET-DISPATCH-MACRO-CHARACTER, it
- should return NIL when there is no definition, e.g.
- (GET-DISPATCH-MACRO-CHARACTER #\# #\{) => NIL
- Instead, in sbcl-0.7.1.17 it returns
- #<FUNCTION "top level local call SB!IMPL::DISPATCH-CHAR-ERROR">
-
-152:
- Undefined functions are supposed to be reported as UNDEFINED-FUNCTION
- conditions, inheriting from CELL-ERROR. Instead sbcl-0.7.1.19 reports
- them as TYPE-ERRORs (reporting the problem as something not being
- coerceable to a function).
-
-153:
- (essentially the same problem as a CMU CL bug reported by Martin
- Cracauer on cmucl-imp 2002-02-19)
- There is a hole in structure slot type checking. Compiling and LOADing
- (declaim (optimize safety))
- (defstruct foo
- (bla 0 :type fixnum))
- (defun f ()
- (let ((foo (make-foo)))
- (setf (foo-bla foo) '(1 . 1))
- (format t "Is ~a of type ~a a cons? => ~a~%"
- (foo-bla foo)
- (type-of (foo-bla foo))
- (consp (foo-bla foo)))))
- (f)
- should signal an error, but in sbcl-0.7.1.21 instead gives the output
- Is (1 . 1) of type CONS a cons? => NIL
- without signalling an error.
-
-
-DEFUNCT CATEGORIES OF BUGS
- IR1-#:
- These labels were used for bugs related to the old IR1 interpreter.
- The # values reached 6 before the category was closed down.
+Refer to User Manual for more details.
projects / sbcl.git / blobdiff