(during macroexpansion of IN-PACKAGE,
during macroexpansion of DEFFOO)
-13:
- Floating point infinities are screwed up. [When I was converting CMU CL
- to SBCL, I was looking for complexity to delete, and I thought it was safe
- to just delete support for floating point infinities. It wasn't: they're
- generated by the floating point hardware even when we remove support
- for them in software. Also we claim the :IEEE-FLOATING-POINT feature,
- and I think that means we should support infinities.-- WHN] Support
- for them should be restored.
-
-14:
- The ANSI syntax for non-STANDARD method combination types in CLOS is
- (DEFGENERIC FOO (X) (:METHOD-COMBINATION PROGN))
- (DEFMETHOD FOO PROGN ((X BAR)) (PRINT 'NUMBER))
- If you mess this up, omitting the PROGN qualifier in in DEFMETHOD,
- (DEFGENERIC FOO (X) (:METHOD-COMBINATION PROGN))
- (DEFMETHOD FOO ((X BAR)) (PRINT 'NUMBER))
- the error mesage is not easy to understand:
- INVALID-METHOD-ERROR was called outside the dynamic scope
- of a method combination function (inside the body of
- DEFINE-METHOD-COMBINATION or a method on the generic
- function COMPUTE-EFFECTIVE-METHOD).
- It would be better if it were more informative, a la
- The method combination type for this method (STANDARD) does
- not match the method combination type for the generic function
- (PROGN).
- Also, after you make the mistake of omitting the PROGN qualifier
- on a DEFMETHOD, doing a new DEFMETHOD with the correct qualifier
- no longer works:
- (DEFMETHOD FOO PROGN ((X BAR)) (PRINT 'NUMBER))
- gives
- INVALID-METHOD-ERROR was called outside the dynamic scope
- of a method combination function (inside the body of
- DEFINE-METHOD-COMBINATION or a method on the generic
- function COMPUTE-EFFECTIVE-METHOD).
- This is not very helpful..
-
15:
(SUBTYPEP '(FUNCTION (T BOOLEAN) NIL)
'(FUNCTION (FIXNUM FIXNUM) NIL)) => T, T
26:
reported by Sam Steingold on the cmucl-imp mailing list 12 May 2000:
-
-Also, there is another bug: `array-displacement' should return an array
-or nil as first value (as per ANSI CL), while CMUCL declares it as
-returning an array as first value always.
+ Also, there is another bug: `array-displacement' should return an
+ array or nil as first value (as per ANSI CL), while CMUCL declares
+ it as returning an array as first value always.
+ (Actually, I think the old CMU CL version in SBCL never returns NIL,
+ i.e. it's not just a declaration problem, but the definition doesn't
+ behave ANSIly.)
27:
Sometimes (SB-EXT:QUIT) fails with
45:
a slew of floating-point-related errors reported by Peter Van Eynde
on July 25, 2000:
- a: (SQRT -9.0) fails, because SB-KERNEL::COMPLEX-SQRT is undefined.
- Similarly, COMPLEX-ASIN, COMPLEX-ACOS, COMPLEX-ACOSH, and others
- aren't found.
+ a: (fixed in sbcl-0.6.11.25)
b: SBCL's value for LEAST-POSITIVE-SHORT-FLOAT is bogus, and
should probably be 1.4012985e-45. In SBCL,
(/ LEAST-POSITIVE-SHORT-FLOAT 2) returns a number smaller
(EXPT 10.0d0 1000)
PVE's regression tests want them to raise errors. SBCL
generates the infinities instead, which may or may not be
- conforming behavior, but then blow it by being unable to
- output the infinities, since support for infinities is generally
- broken, and in particular SB-IMPL::OUTPUT-FLOAT-INFINITY is
- undefined.
+ conforming behavior.
d: (in section12.erg) various forms a la
(FLOAT 1 DOUBLE-FLOAT-EPSILON)
don't give the right behavior.
or query the current working directory (a la Unix "chdir" and "pwd"),
which is functionality that ILISP needs (and currently gets with low-level
hacks).
+ When this is fixed, probably the more-or-less-parallel Unix-level
+ hacks
+ DEFAULT-DIRECTORY
+ %SET-DEFAULT-DIRECTORY
+ etc.?
+ should go away. Also we need to figure out what's the proper way to
+ deal with the interaction of users assigning new values to
+ *DEFAULT-PATHNAME-DEFAULTS* and cores being saved and restored.
+ (Perhaps just make restoring from a save always overwrite the old
+ value with the new Unix-level default directory?)
60:
The debugger LIST-LOCATIONS command doesn't work properly.
(I haven't tried to investigate this bug enough to guess whether
there might be any user-level symptoms.)
-87:
- Despite what the manual says, (DECLAIM (SPEED 0)) doesn't cause
- things to be byte compiled. This seems to be true in cmucl-2.4.19,
- too: (COMPILE-FILE .. :BYTE-COMPILE T) causes byte-compilation,
- but ordinary COMPILE-FILE of a file containing (DECLAIM (SPEED 0))
- does not.
-
90:
a latent cross-compilation/bootstrapping bug: The cross-compilation
host's CL:CHAR-CODE-LIMIT is used in target code in readtable.lisp
bootstrap on a system which uses a different value of CHAR-CODE-LIMIT
than SBCL does.
+91:
+ (subtypep '(or (integer -1 1)
+ unsigned-byte)
+ '(or (rational -1 7)
+ unsigned-byte
+ (integer -1 1))) => NIL,T
+ An analogous problem with SINGLE-FLOAT and REAL types was fixed in
+ sbcl-0.6.11.22, but some peculiarites of the RATIO type make it
+ awkward to generalize the fix to INTEGER and RATIONAL. It's not
+ clear what's the best fix. (See the "bug in type handling" discussion
+ on cmucl-imp ca. 2001-03-22 and ca. 2001-02-12.)
+
+93:
+ In sbcl-0.6.11.26, (COMPILE 'IN-HOST-COMPILATION-MODE) in
+ src/cold/shared.lisp doesn't correctly translate the
+ interpreted function
+ (defun in-host-compilation-mode (fn)
+ (let ((*features* (cons :sb-xc-host *features*))
+ ;; the CROSS-FLOAT-INFINITY-KLUDGE, as documented in
+ ;; base-target-features.lisp-expr:
+ (*shebang-features* (set-difference *shebang-features*
+ '(:sb-propagate-float-type
+ :sb-propagate-fun-type))))
+ (with-additional-nickname ("SB-XC" "SB!XC")
+ (funcall fn))))
+ No error is reported by the compiler, but when the function is executed,
+ it causes an error
+ TYPE-ERROR in SB-KERNEL::OBJECT-NOT-TYPE-ERROR-HANDLER:
+ (:LINUX :X86 :IEEE-FLOATING-POINT :SB-CONSTRAIN-FLOAT-TYPE :SB-TEST
+ :SB-INTERPRETER :SB-DOC :UNIX ...) is not of type SYMBOL.
+
+94a:
+ Inconsistencies between derived and declared VALUES return types for
+ DEFUN aren't checked very well. E.g. the logic which successfully
+ catches problems like
+ (declaim (ftype (function (fixnum) float) foo))
+ (defun foo (x)
+ (declare (type integer x))
+ (values x)) ; wrong return type, detected, gives warning, good!
+ fails to catch
+ (declaim (ftype (function (t) (values t t)) bar))
+ (defun bar (x)
+ (values x)) ; wrong number of return values, no warning, bad!
+ The cause of this is seems to be that (1) the internal function
+ VALUES-TYPES-EQUAL-OR-INTERSECT used to make the check handles its
+ arguments symmetrically, and (2) when the type checking code was
+ written back when when SBCL's code was still CMU CL, the intent
+ was that this case
+ (declaim (ftype (function (t) t) bar))
+ (defun bar (x)
+ (values x x)) ; wrong number of return values; should give warning?
+ not be warned for, because a two-valued return value is considered
+ to be compatible with callers who expects a single value to be
+ returned. That intent is probably not appropriate for modern ANSI
+ Common Lisp, but fixing this might be complicated because of other
+ divergences between auld-style and new-style handling of
+ multiple-VALUES types. (Some issues related to this were discussed
+ on cmucl-imp at some length sometime in 2000.)
+
+95:
+ The facility for dumping a running Lisp image to disk gets confused
+ when run without the PURIFY option, and creates an unnecessarily large
+ core file (apparently representing memory usage up to the previous
+ high-water mark). Moreover, when the file is loaded, it confuses the
+ GC, so that thereafter memory usage can never be reduced below that
+ level.
+
+96:
+ The TRACE facility can't be used on some kinds of functions.
+ (Basically, the breakpoint facility was incompletely implemented
+ in the X86 port of CMU CL, and hasn't been fixed in SBCL.)
+
+98:
+ In sbcl-0.6.11.41 (and in all earlier SBCL, and in CMU
+ CL), out-of-line structure slot setters are horribly inefficient
+ whenever the type of the slot is declared, because out-of-line
+ structure slot setters are implemented as closures to save space,
+ so the compiler doesn't compile the type test into code, but
+ instead just saves the type in a lexical closure and interprets it
+ at runtime.
+ A proper solution involves deciding whether it's really worth
+ saving space by implementing structure slot accessors as closures.
+ (If it's not worth it, the problem vanishes automatically. If it
+ is worth it, there are hacks we could use to force type tests to
+ be compiled anyway, and even shared. E.g. we could implement
+ an EQUAL hash table mapping from types to compiled type tests,
+ and save the appropriate compiled type test as part of each lexical
+ closure; or we could make the lexical closures be placeholders
+ which overwrite their old definition as a lexical closure with
+ a new compiled definition the first time that they're called.)
+ As a workaround for the problem, #'(SETF FOO) expressions can
+ be replaced with (EFFICIENT-SETF-FUNCTION FOO), where
+(defmacro efficient-setf-function (place-function-name)
+ (or #+sbcl (and (sb-impl::info :function :accessor-for place-function-name)
+ ;; a workaround for the problem, encouraging the
+ ;; inline expansion of the structure accessor, so
+ ;; that the compiler can optimize its type test
+ (let ((new-value (gensym "NEW-VALUE-"))
+ (structure-value (gensym "STRUCTURE-VALUE-")))
+ `(lambda (,new-value ,structure-value)
+ (setf (,place-function-name ,structure-value)
+ ,new-value))))
+ ;; no problem, can just use the ordinary expansion
+ `(function (setf ,place-function-name))))
+
+99:
+ DESCRIBE interacts poorly with *PRINT-CIRCLE*, e.g. the output from
+ (let ((*print-circle* t)) (describe (make-hash-table)))
+ is weird,
+ #<HASH-TABLE :TEST EQL :COUNT 0 {90BBFC5}> is an . (EQL)
+ Its SIZE is 16.
+ Its REHASH-SIZE is 1.5. Its REHASH-THRESHOLD is . (1.0)
+ It holds 0 key/value pairs.
+ where the ". (EQL)" and ". (1.0)" substrings are screwups.
+ (This is likely a pretty-printer problem which happens to
+ be exercised by DESCRIBE, not actually a DESCRIBE problem.)
+
+100:
+ There's apparently a bug in CEILING optimization which caused
+ Douglas Crosher to patch the CMU CL version. Martin Atzmueller
+ applied the patches to SBCL and they didn't seem to cause problems
+ (as reported sbcl-devel 2001-05-04). However, since the patches
+ modify nontrivial code which was apparently written incorrectly
+ the first time around, until regression tests are written I'm not
+ comfortable merging the patches in the CVS version of SBCL.
+
+101:
+ The error message for calls to structure accessors with the
+ wrong number of arguments is confusing and of the wrong
+ condition class (TYPE-ERROR instead of PROGRAM-ERROR):
+ * (defstruct foo x y)
+ * (foo-x)
+ debugger invoked on condition of type SIMPLE-TYPE-ERROR:
+ Structure for accessor FOO-X is not a FOO:
+ 301988783
+
KNOWN BUGS RELATED TO THE IR1 INTERPRETER
projects / sbcl.git / blobdiff