-@node Beyond The ANSI Standard, The Foreign Function Interface, Efficiency, Top
+@node Beyond the ANSI Standard
@comment node-name, next, previous, up
-@chapter Beyond The ANSI Standard
-
-SBCL is mostly an implementation of the ANSI standard for
-Common Lisp. However, there's some important behavior which extends
-or clarifies the standard, and various behavior which outright
-violates the standard.
-
-
-@menu
-* Non-Conformance With The ANSI Standard::
-* Idiosyncrasies::
-* Extensions::
-@end menu
-
-@node Non-Conformance With The ANSI Standard, Idiosyncrasies, Beyond The ANSI Standard, Beyond The ANSI Standard
-@comment node-name, next, previous, up
-@section Non-Conformance With The ANSI Standard
-
-Essentially every type of non-conformance is considered a bug. (The
-exceptions involve internal inconsistencies in the standard.) In SBCL
-0.7.6, the master record of known bugs is in the @file{BUGS} file in
-the distribution. Some highlight information about bugs may also be
-found in the manual page. The recommended way to report bugs is
-through the sbcl-help or sbcl-devel mailings lists. For mailing list
-addresses, @ref{More SBCL Information}.
-
-
-@node Idiosyncrasies, Extensions, Non-Conformance With The ANSI Standard, Beyond The ANSI Standard
-@comment node-name, next, previous, up
-@section Idiosyncrasies
-
-The information in this section describes some of the ways that SBCL
-deals with choices that the ANSI standard leaves to the
-implementation.
-
-Declarations are generally treated as assertions. This general
-principle, and its implications, and the bugs which still keep the
-compiler from quite satisfying this principle, are discussed in the
-chapter on the compiler, @ref{The Compiler}.
-
-SBCL is essentially a compiler-only implementation of Common
-Lisp. That is, for all but a few special cases, @code{eval} creates a
-lambda expression, calls @code{compile} on the lambda expression to
-create a compiled function, and then calls @code{funcall} on the
-resulting function object. This is explicitly allowed by the ANSI
-standard, but leads to some oddities, e.g. collapsing @code{functionp}
-and @code{compiled-function-p} into the same predicate.
-
-SBCL is quite strict about ANSI's definition of
-@code{defconstant}. ANSI says that doing @code{defconstant} of the
-same symbol more than once is undefined unless the new value is
-@code{eql} to the old value. Conforming to this specification is a
-nuisance when the ``constant'' value is only constant under some
-weaker test like @code{string=} or @code{equal}. It's especially
-annoying because, in SBCL, @code{defconstant} takes effect not only at
-load time but also at compile time, so that just compiling and loading
-reasonable code like
-
-@lisp
-(defconstant +foobyte+ '(1 4))
-@end lisp
-
-runs into this undefined behavior. Many implementations of Common Lisp
-try to help the programmer around this annoyance by silently accepting
-the undefined code and trying to do what the programmer probably
-meant. SBCL instead treats the undefined behavior as an error. Often
-such code can be rewritten in portable ANSI Common Lisp which has the
-desired behavior. E.g., the code above can be given an exactly
-defined meaning by replacing @code{defconstant} either with
-@code{defparameter} or with a customized macro which does the right
-thing, possibly along the lines of the @code{defconstant-eqx} macro
-used internally in the implementation of SBCL itself. In
-circumstances where this is not appropriate, the programmer can handle
-the condition type @code{sb-ext:defconstant-uneql}, and choose either
-the @command{continue} or @command{abort} restart as appropriate.
-
-SBCL gives style warnings about various kinds of perfectly legal code,
-e.g.
-
-@itemize
-
-@item
-@code{defmethod} without @code{defgeneric}
-
-@item
-multiple @code{defun}s of the same symbol
-
-@item
-special variables not named in the conventional @code{*foo*} style,
-and lexical variables unconventionally named in the @code{*foo*} style
-
-@end itemize
-
-This causes friction with people who point out that other ways of
-organizing code (especially avoiding the use of @code{defgeneric}) are
-just as aesthetically stylish. However, these warnings should be read
-not as ``warning, bad aesthetics detected, you have no style'' but
-``warning, this style keeps the compiler from understanding the code
-as well as you might like.'' That is, unless the compiler warns about
-such conditions, there's no way for the compiler to warn about some
-programming errors which would otherwise be easy to overlook. (Related
-bug: The warning about multiple @code{defun}s is pointlessly annoying
-when you compile and then load a function containing @code{defun}
-wrapped in @code{eval-when}, and ideally should be suppressed in that
-case, but still isn't as of SBCL 0.7.6.)
-
-
-@node Extensions, , Idiosyncrasies, Beyond The ANSI Standard
-@comment node-name, next, previous, up
-@section Extensions
+@chapter Beyond the ANSI Standard
SBCL is derived from CMUCL, which implements many extensions to the
ANSI standard. SBCL doesn't support as many extensions as CMUCL, but
-it still has quite a few.
-
+it still has quite a few. @xref{Contributed Modules}.
@menu
-* Things Which Might Be In The Next ANSI Standard::
-* Threading::
+* Garbage Collection::
+* Metaobject Protocol::
* Support For Unix::
* Customization Hooks for Users::
* Tools To Help Developers::
-* Interface To Low-Level SBCL Implementation::
+* Resolution of Name Conflicts::
+* Stale Extensions::
* Efficiency Hacks::
@end menu
-@node Things Which Might Be In The Next ANSI Standard, Threading, Extensions, Extensions
+@node Garbage Collection
@comment node-name, next, previous, up
-@subsection Things Which Might Be In The Next ANSI Standard
-
-SBCL provides extensive support for calling external C code, @ref{The
-Foreign Function Interface}.
+@section Garbage Collection
SBCL provides additional garbage collection functionality not
specified by ANSI. Weak pointers allow references to objects to be
-maintained without keeping them from being GCed (garbage
-collected). And ``finalization'' hooks are available to cause code to
-be executed when an object has been GCed.
-@c <!-- FIXME: Actually documenting these would be good.:-| -->
-
-SBCL supports @dfn{Gray streams}, user-overloadable CLOS classes whose
-instances can be used as Lisp streams (e.g. passed as the first
-argument to @code{format}). Additionally, the bundled contrib module
-@dfn{sb-simple-streams} implements a subset of the Franz Allegro
-simple-streams proposal.
-
-SBCL supports a MetaObject Protocol which is intended to be compatible
+maintained without keeping them from being garbage collected, and
+``finalization'' hooks are available to cause code to be executed when
+an object has been garbage collected. Additionally users can specify
+their own cleanup actions to be executed with garbage collection.
+
+@include fun-sb-ext-finalize.texinfo
+@include fun-sb-ext-cancel-finalization.texinfo
+@include fun-sb-ext-make-weak-pointer.texinfo
+@include fun-sb-ext-weak-pointer-value.texinfo
+@include var-sb-ext-star-after-gc-hooks-star.texinfo
+
+@node Metaobject Protocol
+@comment node-name, next, previous, up
+@section Metaobject Protocol
+
+SBCL supports a metaobject protocol which is intended to be compatible
with AMOP; present exceptions to this (as distinct from current bugs)
are:
@end itemize
-
-@node Threading, Support For Unix, Things Which Might Be In The Next ANSI Standard, Extensions
+@node Support For Unix
@comment node-name, next, previous, up
-@subsection Threading (a.k.a Multiprocessing)
-
-SBCL (as of version 0.8.3, on Linux x86 only) supports a fairly
-low-level threading interface that maps onto the host operating
-system's concept of threads or lightweight processes.
-
-@subsubsection Lisp-level view
-
-A rudimentary interface to creating and managing multiple threads can
-be found in the @dfn{sb-thread} package. This is intended for public
-consumption, so look at the exported symbols and their documentation
-strings.
-
-Dynamic bindings to symbols are per-thread. Signal handlers are
-per-thread.
-
-Mutexes and condition variables are available for managing access to
-shared data: see
-
-@itemize
-
-@item
-@code{(apropos "mutex" :sb-thread)}
-
-@item
-@code{(apropos "condition" :sb-thread)}
-
-@item
-and the @code{waitqueue} structure
-
-@end itemize
-
-and poke around in their documentation strings.
-
-@subsubsection Sessions
-
-If the user has multiple views onto the same Lisp image (for example,
-using multiple terminals, or a windowing system, or network access)
-they are typically set up as multiple @dfn{sessions} such that each
-view has its own collection of foreground/background/stopped threads.
-A thread which wishes to create a new session can use
-@code{sb-thread:with-new-session} to remove itself from the current
-session (which it shares with its parent and siblings) and create a
-fresh one. See also @code{sb-thread:make-listener-thread}.
-
-Within a single session, threads arbitrate between themselves for the
-user's attention. A thread may be in one of three notional states:
-foreground, background, or stopped. When a background process
-attempts to print a repl prompt or to enter the debugger, it will stop
-and print a message saying that it has stopped. The user at his
-leisure may switch to that thread to find out what it needs. If a
-background thread enters the debugger, selecting any restart will put
-it back into the background before it resumes. Arbitration for the
-input stream is managed by calls to @code{sb-thread:get-foreground}
-(which may block) and @code{sb-thread:release-foreground}.
-
-@code{sb-ext:quit} terminates all threads in the current session, but
-leaves other sessions running.
-
-
-@subsubsection Implementation (Linux x86)
-
-On Linux x86, threading is implemented using @code{clone()} and does
-not involve pthreads. This is not because there is anything wrong
-with pthreads @emph{per se}, but there is plenty wrong (from our
-perspective) with LinuxThreads. SBCL threads are mapped 1:1 onto
-Linux tasks which share a VM but nothing else - each has its own
-process id and can be seen in e.g. @command{ps} output.
-
-Per-thread local bindings for special variables is achieved using the
-%fs segment register to point to a per-thread storage area. This may
-cause interesting results if you link to foreign code that expects
-threading or creates new threads, and the thread library in question
-uses %fs in an incompatible way.
-
-There are two implementation mechanisms for queueing. If SBCL was
-built on an NPTL-capable Linux system (2.6 or some vendor 2.4 ports)
-with the @code{:SB-FUTEX} feature, queuing will be done using the
-@code{sys_futex()} system call if it's available at runtime.
-Otherwise it will fall back to using @code{sigtimedwait()} to sleep
-and a signal (@code{SIG_DEQUEUE}, one of the POSIX RT signals) to
-wake.
-
-Garbage collection is done with the existing Conservative Generational
-GC. Allocation is done in small (typically 8k) regions: each thread
-has its own region so this involves no stopping. However, when a
-region fills, a lock must be obtained while another is allocated, and
-when a collection is required, all processes are stopped. This is
-achieved by sending them signals, which may make for interesting
-behaviour if they are interrupted in system calls. The streams
-interface is believed to handle the required system call restarting
-correctly, but this may be a consideration when making other blocking
-calls e.g. from foreign library code.
-
-Large amounts of the SBCL library have not been inspected for
-thread-safety. Some of the obviously unsafe areas have large locks
-around them, so compilation and fasl loading, for example, cannot be
-parallelized. Work is ongoing in this area.
-
-A new thread by default is created in the same POSIX process group and
-session as the thread it was created by. This has an impact on
-keyboard interrupt handling: pressing your terminal's intr key
-(typically @kbd{Control-C}) will interrupt all processes in the
-foreground process group, including Lisp threads that SBCL considers
-to be notionally `background'. This is undesirable, so background
-threads are set to ignore the SIGINT signal.
-
-@code{sb-thread:make-listener-thread} in addition to creating a new
-Lisp session makes a new POSIX session, so that pressing
-@kbd{Control-C} in one window will not interrupt another listener -
-this has been found to be embarrassing.
-
-
-@node Support For Unix, Customization Hooks for Users, Threading, Extensions
-@comment node-name, next, previous, up
-@subsection Support For Unix
+@section Support For Unix
The UNIX command line can be read from the variable
@code{sb-ext:*posix-argv*}. The UNIX environment can be queried with
@include fun-sb-ext-posix-getenv.texinfo
-The SBCL system can be terminated with @code{sb-ext:quit}, (but see
-notes in @ref{Threading} about the interaction between this feature and
-sessions) optionally returning a specified numeric value to the
-calling Unix process. The normal Unix idiom of terminating on end of
-file on input is also supported.
-@include fun-sb-ext-quit.texinfo
-
-@node Customization Hooks for Users, Tools To Help Developers, Support For Unix, Extensions
+@node Customization Hooks for Users
@comment node-name, next, previous, up
-@subsection Customization Hooks for Users
-
-The behaviour of @code{require} when called with only one argument is
-implementation-defined. In SBCL it calls functions on the
-user-settable list @code{sb-ext:*module-provider-functions*} - see the
-@code{require} documentation string for details.
+@section Customization Hooks for Users
The toplevel repl prompt may be customized, and the function
that reads user input may be replaced completely.
@c <!-- FIXME but I don't currently remember how -->
+The behaviour of @code{require} when called with only one argument is
+implementation-defined. In SBCL, @code{require} behaves in the
+following way:
+
+@include fun-common-lisp-require.texinfo
+@include var-sb-ext-star-module-provider-functions-star.texinfo
+
+Although SBCL does not provide a resident editor, the @code{ed}
+function can be customized to hook into user-provided editing
+mechanisms as follows:
-@node Tools To Help Developers, Interface To Low-Level SBCL Implementation, Customization Hooks for Users, Extensions
+@include fun-common-lisp-ed.texinfo
+@include var-sb-ext-star-ed-functions-star.texinfo
+
+@node Tools To Help Developers
@comment node-name, next, previous, up
-@subsection Tools To Help Developers
+@section Tools To Help Developers
-SBCL provides a profiler and other extensions to the ANSI
-@code{trace} facility. See the online function documentation for
-@code{trace} for more information.
+SBCL provides a profiler and other extensions to the ANSI @code{trace}
+facility. For more information, see @ref{Macro common-lisp:trace}.
The debugger supports a number of options. Its documentation is
-accessed by typing @kbd{help} at the debugger prompt.
-@c <!-- FIXME:
-@c A true debugger section in the manual would be good. Start
-@c with CMU CL's debugger section, but remember:
-@c * no QUIT command (TOPLEVEL restart instead)
-@c * no GO command (CONTINUE restart instead)
-@c * Limitations of the x86 port of the debugger should be
-@c documented or fixed where possible.
-@c * Discuss TRACE and its unification with PROFILE. -->
+accessed by typing @kbd{help} at the debugger prompt. @xref{Debugger}.
Documentation for @code{inspect} is accessed by typing @kbd{help} at
the @code{inspect} prompt.
+@node Resolution of Name Conflicts
+@section Resolution of Name Conflicts
-@node Interface To Low-Level SBCL Implementation, Efficiency Hacks, Tools To Help Developers, Extensions
-@comment node-name, next, previous, up
-@subsection Interface To Low-Level SBCL Implementation
+The ANSI standard (section 11.1.1.2.5) requires that name conflicts in
+packages be resolvable in favour of any of the conflicting symbols. In
+the interactive debugger, this is achieved by prompting for the symbol
+in whose favour the conflict should be resolved; for programmatic use,
+the @code{sb-ext:resolve-conflict} restart should be invoked with one
+argument, which should be a member of the list returned by the condition
+accessor @code{sb-ext:name-conflict-symbols}.
-SBCL has the ability to save its state as a file for later
-execution. This functionality is important for its bootstrapping
-process, and is also provided as an extension to the user. See the
-documentation string for @code{sb-ext:save-lisp-and-die} for more
-information.
+@node Stale Extensions
+@comment node-name, next, previous, up
+@section Stale Extensions
-@quotation
-Note: SBCL has inherited from CMUCL various hooks to allow the user to
+SBCL has inherited from CMUCL various hooks to allow the user to
tweak and monitor the garbage collection process. These are somewhat
stale code, and their interface might need to be cleaned up. If you
have urgent need of them, look at the code in @file{src/code/gc.lisp}
and bring it up on the developers' mailing list.
-@end quotation
-@quotation
-Note: SBCL has various hooks inherited from CMUCL, like
+SBCL has various hooks inherited from CMUCL, like
@code{sb-ext:float-denormalized-p}, to allow a program to take
advantage of IEEE floating point arithmetic properties which aren't
conveniently or efficiently expressible using the ANSI standard. These
me that it was in the IEEE spec). If you need this stuff, take a look
at the code and bring it up on the developers' mailing
list.
-@end quotation
-@node Efficiency Hacks, , Interface To Low-Level SBCL Implementation, Extensions
+@node Efficiency Hacks
@comment node-name, next, previous, up
-@subsection Efficiency Hacks
+@section Efficiency Hacks
The @code{sb-ext:purify} function causes SBCL first to collect all
garbage, then to mark all uncollected objects as permanent, never
@include fun-sb-ext-purify.texinfo
-@code{sb-ext:truly-the} special form declares the type of the result
-of the operations, producing its argument; the declaration is not
-checked. In short: don't use it.
+The @code{sb-ext:truly-the} special form declares the type of the
+result of the operations, producing its argument; the declaration is
+not checked. In short: don't use it.
@include special-operator-sb-ext-truly-the.texinfo
projects / sbcl.git / blobdiff