;;; which might be tedious to maintain, instead we use a hack:
;;; anything whose name matches a magic character pattern is
;;; uninterned.
+;;;
+;;; FIXME: should also go through globaldb (and perhaps other tables)
+;;; blowing away associated entries
(defun !unintern-init-only-stuff ()
(do ((any-changes? nil nil))
(nil)
(and (>= (length name) 2)
(string= name "*!" :end1 2 :end2 2)))
(/show0 "uninterning cold-init-only symbol..")
- #!+sb-show (%primitive print name)
+ (/primitive-print name)
(unintern symbol package)
(setf any-changes? t)))))
(unless any-changes?
(return))))
\f
-;;;; !COLD-INIT
-
-;;; a list of toplevel things set by GENESIS
-(defvar *!reversed-cold-toplevels*)
-
-;;; a SIMPLE-VECTOR set by genesis
-(defvar *!load-time-values*)
+;;;; putting ourselves out of our misery when things become too much to bear
+(declaim (ftype (function (simple-string) nil) critically-unreachable))
(defun !cold-lose (msg)
(%primitive print msg)
(%primitive print "too early in cold init to recover from errors")
(%halt))
-#!+gengc
-(defun do-load-time-value-fixup (object offset index)
- (declare (type index offset))
- (let ((value (svref *!load-time-values* index)))
- (typecase object
- (list
- (case offset
- (0 (setf (car object) value))
- (1 (setf (cdr object) value))
- (t (!cold-lose "bogus offset in cons cell"))))
- (instance
- (setf (%instance-ref object (- offset sb!vm:instance-slots-offset))
- value))
- (code-component
- (setf (code-header-ref object offset) value))
- (simple-vector
- (setf (svref object (- offset sb!vm:vector-data-offset)) value))
- (t
- (!cold-lose "unknown kind of object for load-time-value fixup")))))
+;;; last-ditch error reporting for things which should never happen
+;;; and which, if they do happen, are sufficiently likely to torpedo
+;;; the normal error-handling system that we want to bypass it
+(declaim (ftype (function (simple-string) nil) critically-unreachable))
+(defun critically-unreachable (where)
+ (%primitive print "internal error: Control should never reach here, i.e.")
+ (%primitive print where)
+ (%halt))
+\f
+;;;; !COLD-INIT
+
+;;; a list of toplevel things set by GENESIS
+(defvar *!reversed-cold-toplevels*)
+
+;;; a SIMPLE-VECTOR set by GENESIS
+(defvar *!load-time-values*)
(eval-when (:compile-toplevel :execute)
;; FIXME: Perhaps we should make SHOW-AND-CALL-AND-FMAKUNBOUND, too,
;; not to use it for the COLD-INIT-OR-REINIT functions.)
(sb!xc:defmacro show-and-call (name)
`(progn
- #!+sb-show (%primitive print ,(symbol-name name))
+ (/primitive-print ,(symbol-name name))
(,name))))
;;; called when a cold system starts up
;; !UNIX-COLD-INIT. And *TYPE-SYSTEM-INITIALIZED* could be changed to
;; *TYPE-SYSTEM-INITIALIZED-WHEN-BOUND* so that it doesn't need to
;; be explicitly set in order to be meaningful.
- (setf *gc-verbose* nil)
- (setf *gc-notify-stream* nil)
- (setf *before-gc-hooks* nil)
- (setf *after-gc-hooks* nil)
- #!+gengc (setf *handler-clusters* nil)
- #!-gengc (setf *already-maybe-gcing* t
- *gc-inhibit* t
- *need-to-collect-garbage* nil
- sb!unix::*interrupts-enabled* t
- sb!unix::*interrupt-pending* nil)
- (setf *break-on-signals* nil)
- (setf *maximum-error-depth* 10)
- (setf *current-error-depth* 0)
- (setf *cold-init-complete-p* nil)
- (setf *type-system-initialized* nil)
+ (setf *gc-notify-stream* nil
+ *before-gc-hooks* nil
+ *after-gc-hooks* nil
+ *already-maybe-gcing* t
+ *gc-inhibit* t
+ *need-to-collect-garbage* nil
+ sb!unix::*interrupts-enabled* t
+ sb!unix::*interrupt-pending* nil
+ *break-on-signals* nil
+ *maximum-error-depth* 10
+ *current-error-depth* 0
+ *cold-init-complete-p* nil
+ *type-system-initialized* nil)
+
+ (show-and-call !typecheckfuns-cold-init)
;; Anyone might call RANDOM to initialize a hash value or something;
;; and there's nothing which needs to be initialized in order for
;; this to be initialized, so we initialize it right away.
(show-and-call !random-cold-init)
+ (show-and-call !package-cold-init)
+
;; All sorts of things need INFO and/or (SETF INFO).
(/show0 "about to SHOW-AND-CALL !GLOBALDB-COLD-INIT")
(show-and-call !globaldb-cold-init)
;; functions are called in the same relative order as the toplevel
;; forms of the corresponding source files.
- (show-and-call !package-cold-init)
+ ;;(show-and-call !package-cold-init)
(show-and-call !policy-cold-init-or-resanify)
(/show0 "back from !POLICY-COLD-INIT-OR-RESANIFY")
;; fixups be done separately? Wouldn't that be clearer and better?
;; -- WHN 19991204
(/show0 "doing cold toplevel forms and fixups")
+ (/show0 "(LISTP *!REVERSED-COLD-TOPLEVELS*)=..")
+ (/hexstr (if (listp *!reversed-cold-toplevels*) "true" "NIL"))
+ (/show0 "about to calculate (LENGTH *!REVERSED-COLD-TOPLEVELS*)")
(/show0 "(LENGTH *!REVERSED-COLD-TOPLEVELS*)=..")
- #!+sb-show (%primitive print
- (sb!impl::hexstr (length *!reversed-cold-toplevels*)))
- (let (#!+sb-show (index-in-cold-toplevels 0)
- #!+sb-show (filename-in-cold-toplevels nil))
+ #!+sb-show (let ((r-c-tl-length (length *!reversed-cold-toplevels*)))
+ (/show0 "(length calculated..)")
+ (let ((hexstr (hexstr r-c-tl-length)))
+ (/show0 "(hexstr calculated..)")
+ (/primitive-print hexstr)))
+ (let (#!+sb-show (index-in-cold-toplevels 0))
#!+sb-show (declare (type fixnum index-in-cold-toplevels))
+
(dolist (toplevel-thing (prog1
(nreverse *!reversed-cold-toplevels*)
;; (Now that we've NREVERSEd it, it's
#!+sb-show
(when (zerop (mod index-in-cold-toplevels 1024))
(/show0 "INDEX-IN-COLD-TOPLEVELS=..")
- (%primitive print (sb!impl::hexstr index-in-cold-toplevels)))
+ (/hexstr index-in-cold-toplevels))
#!+sb-show
(setf index-in-cold-toplevels
(the fixnum (1+ index-in-cold-toplevels)))
(setf (svref *!load-time-values* (third toplevel-thing))
(funcall (second toplevel-thing))))
(:load-time-value-fixup
- #!-gengc
(setf (sap-ref-32 (second toplevel-thing) 0)
(get-lisp-obj-address
- (svref *!load-time-values* (third toplevel-thing))))
- #!+gengc
- (do-load-time-value-fixup (second toplevel-thing)
- (third toplevel-thing)
- (fourth toplevel-thing)))
+ (svref *!load-time-values* (third toplevel-thing)))))
#!+(and x86 gencgc)
(:load-time-code-fixup
- (sb!vm::do-load-time-code-fixup (second toplevel-thing)
- (third toplevel-thing)
- (fourth toplevel-thing)
- (fifth toplevel-thing)))
+ (sb!vm::!do-load-time-code-fixup (second toplevel-thing)
+ (third toplevel-thing)
+ (fourth toplevel-thing)
+ (fifth toplevel-thing)))
(t
(!cold-lose "bogus fixup code in *!REVERSED-COLD-TOPLEVELS*"))))
(t (!cold-lose "bogus function in *!REVERSED-COLD-TOPLEVELS*")))))
(/show0 "done with loop over cold toplevel forms and fixups")
- ;; Set sane values again, so that the user sees sane values instead of
- ;; whatever is left over from the last DECLAIM/PROCLAIM.
+ ;; Set sane values again, so that the user sees sane values instead
+ ;; of whatever is left over from the last DECLAIM/PROCLAIM.
(show-and-call !policy-cold-init-or-resanify)
;; Only do this after toplevel forms have run, 'cause that's where
;; FIXME: This list of modes should be defined in one place and
;; explicitly shared between here and REINIT.
+ ;;
+ ;; FIXME: In CMU CL, this is done "here" (i.e. in the analogous
+ ;; lispinit.lisp code) for every processor architecture. But Daniel
+ ;; Barlow's Alpha patches suppress it for Alpha. Why the difference?
+ #!+alpha
(set-floating-point-modes :traps '(:overflow
#!-x86 :underflow
:invalid
(show-and-call !class-finalize)
;; The reader and printer are initialized very late, so that they
- ;; can even do hairy things like invoking the compiler as part of
- ;; their initialization.
+ ;; can do hairy things like invoking the compiler as part of their
+ ;; initialization.
(show-and-call !reader-cold-init)
(let ((*readtable* *standard-readtable*))
(show-and-call !sharpm-cold-init)
;; the ANSI-specified initial value of *PACKAGE*
(setf *package* (find-package "COMMON-LISP-USER"))
- ;; FIXME: I'm not sure where it should be done, but CL-USER really
- ;; ought to USE-PACKAGE publicly accessible packages like SB-DEBUG
- ;; (for ARG and VAR), SB-EXT, SB-EXT-C-CALL, and SB-EXT-ALIEN so
- ;; that the user has a hint about which symbols we consider public.
- ;; (Perhaps SB-DEBUG wouldn't need to be in the list if ARG and VAR
- ;; could be typed directly, with no parentheses, at the debug prompt
- ;; the way that e.g. F or BACKTRACE can be?)
-
- (/show0 "done initializing")
- (setf *cold-init-complete-p* t)
- ;; Unintern no-longer-needed stuff before we GC.
- #!-sb-fluid
- (!unintern-init-only-stuff)
+ (/show0 "done initializing, setting *COLD-INIT-COMPLETE-P*")
+ (setf *cold-init-complete-p* t)
;; The system is finally ready for GC.
- #!-gengc (setf *already-maybe-gcing* nil)
+ (setf *already-maybe-gcing* nil)
(/show0 "enabling GC")
(gc-on)
(/show0 "doing first GC")
(terpri)
(/show0 "going into toplevel loop")
(handling-end-of-the-world
- (toplevel-init)))
+ (toplevel-init)
+ (critically-unreachable "after TOPLEVEL-INIT")))
(defun quit (&key recklessly-p
(unix-code 0 unix-code-p)
"Terminate the current Lisp. Things are cleaned up (with UNWIND-PROTECT
and so forth) unless RECKLESSLY-P is non-NIL. On UNIX-like systems,
UNIX-STATUS is used as the status code."
- (declare (type (signed-byte 32) unix-code))
+ (declare (type (signed-byte 32) unix-status unix-code))
+ (/show0 "entering QUIT")
;; FIXME: UNIX-CODE was deprecated in sbcl-0.6.8, after having been
;; around for less than a year. It should be safe to remove it after
;; a year.
instead (which is another name for the same thing)."))
(if recklessly-p
(sb!unix:unix-exit unix-status)
- (throw '%end-of-the-world unix-status)))
+ (throw '%end-of-the-world unix-status))
+ (critically-unreachable "after trying to die in QUIT"))
\f
;;;; initialization functions
(os-cold-init-or-reinit)
(stream-reinit)
(signal-cold-init-or-reinit)
- (gc-cold-init-or-reinit)
+ (gc-reinit)
(setf (sb!alien:extern-alien "internal_errors_enabled" boolean) t)
(set-floating-point-modes :traps
- ;; PRINT seems to not like x86 NPX denormal
- ;; floats like LEAST-NEGATIVE-SINGLE-FLOAT, so
- ;; the :UNDERFLOW exceptions are disabled by
- ;; default. Joe User can explicitly enable them
- ;; if desired.
- '(:overflow #!-x86 :underflow :invalid
- :divide-by-zero))
+ '(:overflow
+ :invalid
+ :divide-by-zero
+ ;; PRINT seems not to like x86 NPX
+ ;; denormal floats like
+ ;; LEAST-NEGATIVE-SINGLE-FLOAT, so
+ ;; the :UNDERFLOW exceptions are
+ ;; disabled by default. Joe User can
+ ;; explicitly enable them if
+ ;; desired.
+ #!-x86 :underflow))
;; Clear pseudo atomic in case this core wasn't compiled with
;; support.
;;
;; reason.. (Perhaps we should do it anyway in case someone
;; manages to save an image from within a pseudo-atomic-atomic
;; operation?)
- #!+x86 (setf sb!impl::*pseudo-atomic-atomic* 0))
+ #!+x86 (setf *pseudo-atomic-atomic* 0))
(gc-on)))
\f
;;;; some support for any hapless wretches who end up debugging cold
;;;; init code
-;;; Decode THING into hex using only machinery available early in cold
-;;; init.
+;;; Decode THING into hexadecimal notation using only machinery
+;;; available early in cold init.
#!+sb-show
(defun hexstr (thing)
+ (/noshow0 "entering HEXSTR")
(let ((addr (sb!kernel:get-lisp-obj-address thing))
(str (make-string 10)))
+ (/noshow0 "ADDR and STR calculated")
(setf (char str 0) #\0
(char str 1) #\x)
+ (/noshow0 "CHARs 0 and 1 set")
(dotimes (i 8)
+ (/noshow0 "at head of DOTIMES loop")
(let* ((nibble (ldb (byte 4 0) addr))
(chr (char "0123456789abcdef" nibble)))
(declare (type (unsigned-byte 4) nibble)
(base-char chr))
+ (/noshow0 "NIBBLE and CHR calculated")
(setf (char str (- 9 i)) chr
addr (ash addr -4))))
str))
projects / sbcl.git / blobdiff