;;;; files for more information.
(in-package "SB!UNIX")
-
-(file-comment
- "$Header$")
\f
;;;; macros for dynamically enabling and disabling signal handling
;;; sets *interrupt-pending* and returns without handling the signal.
;;;
;;; When we drop out the without interrupts, we check to see whether
-;;; *interrupt-pending* has been set. If so, we call
-;;; do-pending-interrupt, which generates a SIGTRAP. The C code
+;;; *INTERRUPT-PENDING* has been set. If so, we call
+;;; RECEIVE-PENDING-INTERRUPT, which generates a SIGTRAP. The C code
;;; invokes the handler for the saved signal instead of the SIGTRAP
;;; after replacing the signal mask in the signal context with the
;;; saved value. When that hander returns, the original signal mask is
;;; installed, allowing any other pending signals to be handled.
;;;
-;;; This means that the cost of without-interrupts is just a special
+;;; This means that the cost of WITHOUT-INTERRUPTS is just a special
;;; binding in the case when no signals are delivered (the normal
;;; case). It's only when a signal is actually delivered that we use
;;; any system calls, and by then the cost of the extra system calls
;;; are lost in the noise when compared with the cost of delivering
;;; the signal in the first place.
-;;; Magically converted by the compiler into a break instruction.
-(defun do-pending-interrupt ()
- (do-pending-interrupt))
-
-#!-gengc (progn
-
(defvar *interrupts-enabled* t)
(defvar *interrupt-pending* nil)
(sb!xc:defmacro without-interrupts (&body body)
#!+sb-doc
"Execute BODY in a context impervious to interrupts."
- (let ((name (gensym)))
+ (let ((name (gensym "WITHOUT-INTERRUPTS-BODY-")))
`(flet ((,name () ,@body))
- (if *interrupts-enabled*
- (unwind-protect
- (let ((*interrupts-enabled* nil))
- (,name))
- ;; FIXME: Does it matter that an interrupt coming in here
- ;; could be executed before any of the pending interrupts?
- ;; Or do incoming interrupts have the good grace to check
- ;; whether interrupts are pending before executing themselves
- ;; immediately?
- (when *interrupt-pending*
- (do-pending-interrupt)))
- (,name)))))
+ (if *interrupts-enabled*
+ (unwind-protect
+ (let ((*interrupts-enabled* nil))
+ (,name))
+ ;; If we were interrupted in the protected section, then
+ ;; the interrupts are still blocked and it remains so
+ ;; until the pending interrupt is handled.
+ ;;
+ ;; If we were not interrupted in the protected section,
+ ;; but here, then even if the interrupt handler enters
+ ;; another WITHOUT-INTERRUPTS, the pending interrupt will
+ ;; be handled immediately upon exit from said
+ ;; WITHOUT-INTERRUPTS, so it is as if nothing has
+ ;; happened.
+ (when *interrupt-pending*
+ (receive-pending-interrupt)))
+ (,name)))))
(sb!xc:defmacro with-interrupts (&body body)
#!+sb-doc
(,name)
(let ((*interrupts-enabled* t))
(when *interrupt-pending*
- (do-pending-interrupt))
+ (receive-pending-interrupt))
(,name))))))
-
-) ; PROGN
-
-;;; On the GENGC system, we have to do it slightly differently because of the
-;;; existence of threads. Each thread has a suspends_disabled_count in its
-;;; mutator structure. When this value is other then zero, the low level stuff
-;;; will not suspend the thread, but will instead set the suspend_pending flag
-;;; (also in the mutator). So when we finish the without-interrupts, we just
-;;; check the suspend_pending flag and trigger a do-pending-interrupt if
-;;; necessary.
-
-#!+gengc
-(defmacro without-interrupts (&body body)
- `(unwind-protect
- (progn
- (locally
- (declare (optimize (speed 3) (safety 0)))
- (incf (sb!kernel:mutator-interrupts-disabled-count)))
- ,@body)
- (locally
- (declare (optimize (speed 3) (safety 0)))
- (when (and (zerop (decf (sb!kernel:mutator-interrupts-disabled-count)))
- (not (zerop (sb!kernel:mutator-interrupt-pending))))
- (do-pending-interrupt)))))
-\f
-;;;; utilities for dealing with signal names and numbers
-
-(defstruct (unix-signal
- (:constructor make-unix-signal (%name %number %description)))
- %name ; signal keyword
- (%number nil :type integer) ; UNIX signal number
- (%description nil :type string)) ; documentation
-
-(defvar *unix-signals* nil
- #!+sb-doc
- "A list of Unix signal structures.")
-
-(defmacro def-unix-signal (name number description)
- (let ((symbol (intern (symbol-name name))))
- `(progn
- ;; KLUDGE: This PUSH should be probably be something like PUSHNEW if we
- ;; want to be able to cleanly reload this file. (Or perhaps
- ;; *UNIX-SIGNALS* should be a hash table keyed by signal name, or a
- ;; vector keyed by signal number?)
- (push (make-unix-signal ,name ,number ,description) *unix-signals*)
- ;; This is to make the new signal lookup stuff compatible with
- ;; old code which expects the symbol with the same print name as
- ;; our keywords to be a constant with a value equal to the signal
- ;; number.
- (defconstant ,symbol ,number ,description)
- (let ((sb!int::*rogue-export* "DEF-MATH-RTN"))
- (export ',symbol)))))
-
-(defun unix-signal-or-lose (arg)
- (let ((signal (find arg *unix-signals*
- :key (etypecase arg
- (symbol #'unix-signal-%name)
- (number #'unix-signal-%number)))))
- (unless signal
- (error "~S is not a valid signal name or number." arg))
- signal))
-
-(defun unix-signal-name (signal)
- #!+sb-doc
- "Return the name of the signal as a string. Signal should be a valid
- signal number or a keyword of the standard UNIX signal name."
- (symbol-name (unix-signal-%name (unix-signal-or-lose signal))))
-
-(defun unix-signal-description (signal)
- #!+sb-doc
- "Return a string describing signal. Signal should be a valid signal
- number or a keyword of the standard UNIX signal name."
- (unix-signal-%description (unix-signal-or-lose signal)))
-
-(defun unix-signal-number (signal)
- #!+sb-doc
- "Return the number of the given signal. Signal should be a valid
- signal number or a keyword of the standard UNIX signal name."
- (unix-signal-%number (unix-signal-or-lose signal)))
-
-;;; Known signals
-(def-unix-signal :CHECK 0 "Check")
-
-(def-unix-signal :SIGHUP 1 "Hangup")
-(def-unix-signal :SIGINT 2 "Interrupt")
-(def-unix-signal :SIGQUIT 3 "Quit")
-(def-unix-signal :SIGILL 4 "Illegal instruction")
-(def-unix-signal :SIGTRAP 5 "Trace trap")
-(def-unix-signal :SIGIOT 6 "Iot instruction")
-#!-linux
-(def-unix-signal :SIGEMT 7 "Emt instruction")
-(def-unix-signal :SIGFPE 8 "Floating point exception")
-(def-unix-signal :SIGKILL 9 "Kill")
-(def-unix-signal :SIGBUS #!-linux 10 #!+linux 7 "Bus error")
-(def-unix-signal :SIGSEGV 11 "Segmentation violation")
-#!-linux
-(def-unix-signal :SIGSYS 12 "Bad argument to system call")
-(def-unix-signal :SIGPIPE 13 "Write on a pipe with no one to read it")
-(def-unix-signal :SIGALRM 14 "Alarm clock")
-(def-unix-signal :SIGTERM 15 "Software termination signal")
-#!+linux
-(def-unix-signal :SIGSTKFLT 16 "Stack fault on coprocessor")
-(def-unix-signal :SIGURG #!+svr4 21 #!-(or hpux svr4 linux) 16 #!+hpux 29
- #!+linux 23 "Urgent condition present on socket")
-(def-unix-signal :SIGSTOP #!-(or hpux svr4 linux) 17 #!+hpux 24 #!+svr4 23
- #!+linux 19 "Stop")
-(def-unix-signal :SIGTSTP #!-(or hpux svr4 linux) 18 #!+hpux 25 #!+svr4 24
- #!+linux 20 "Stop signal generated from keyboard")
-(def-unix-signal :SIGCONT #!-(or hpux svr4 linux) 19 #!+hpux 26 #!+svr4 25
- #!+linux 18 "Continue after stop")
-(def-unix-signal :SIGCHLD #!-(or linux hpux) 20
- #!+hpux 18 #!+linux 17 "Child status has changed")
-(def-unix-signal :SIGTTIN #!-(or hpux svr4) 21 #!+hpux 27 #!+svr4 26
- "Background read attempted from control terminal")
-(def-unix-signal :SIGTTOU #!-(or hpux svr4) 22 #!+hpux 28 #!+svr4 27
- "Background write attempted to control terminal")
-(def-unix-signal :SIGIO #!-(or hpux irix linux) 23 #!+(or hpux irix) 22
- #!+linux 29
- "I/O is possible on a descriptor")
-#!-hpux
-(def-unix-signal :SIGXCPU #!-svr4 24 #!+svr4 30 "Cpu time limit exceeded")
-#!-hpux
-(def-unix-signal :SIGXFSZ #!-svr4 25 #!+svr4 31 "File size limit exceeded")
-(def-unix-signal :SIGVTALRM #!-(or hpux svr4) 26 #!+hpux 20 #!+svr4 28
- "Virtual time alarm")
-(def-unix-signal :SIGPROF #!-(or hpux svr4 linux) 27 #!+hpux 21 #!+svr4 29
- #!+linux 30 "Profiling timer alarm")
-(def-unix-signal :SIGWINCH #!-(or hpux svr4) 28 #!+hpux 23 #!+svr4 20
- "Window size change")
-(def-unix-signal :SIGUSR1 #!-(or hpux svr4 linux) 30 #!+(or hpux svr4) 16
- #!+linux 10 "User defined signal 1")
-(def-unix-signal :SIGUSR2 #!-(or hpux svr4 linux) 31 #!+(or hpux svr4) 17
- #!+linux 12 "User defined signal 2")
-
-#!+mach
-(def-unix-signal :SIGEMSG 30 "Mach Emergency message")
-#!+mach
-(def-unix-signal :SIGMSG 31 "Mach message")
-
-;;; SVR4 (or Solaris?) specific signals
-#!+svr4
-(def-unix-signal :SIGWAITING 32 "Process's lwps are blocked")
-
-(sb!xc:defmacro sigmask (&rest signals)
- #!+sb-doc
- "Returns a mask given a set of signals."
- (apply #'logior
- (mapcar #'(lambda (signal)
- (ash 1 (1- (unix-signal-number signal))))
- signals)))
projects / sbcl.git / blobdiff