(in-package "SB!THREAD")
-;;; FIXME it would be good to define what a thread id is or isn't (our
-;;; current assumption is that it's a fixnum). It so happens that on
-;;; Linux it's a pid, but it might not be on posix thread implementations
+;;; CAS Lock
+;;;
+;;; Locks don't come any simpler -- or more lightweight than this. While
+;;; this is probably a premature optimization for most users, we still
+;;; need it internally for implementing condition variables outside Futex
+;;; builds.
-(define-alien-routine ("create_thread" %create-thread)
- unsigned-long
- (lisp-fun-address unsigned-long))
+(defmacro with-cas-lock ((place) &body body)
+ #!+sb-doc
+ "Runs BODY with interrupts disabled and *CURRENT-THREAD* compare-and-swapped
+into PLACE instead of NIL. PLACE must be a place acceptable to
+COMPARE-AND-SWAP, and must initially hold NIL.
-(define-alien-routine "signal_thread_to_dequeue"
- unsigned-int
- (thread-id unsigned-long))
+WITH-CAS-LOCK is suitable mostly when the critical section needing protection
+is very small, and cost of allocating a separate lock object would be
+prohibitive. While it is the most lightweight locking constructed offered by
+SBCL, it is also the least scalable if the section is heavily contested or
+long.
-(defvar *session* nil)
+WITH-CAS-LOCK can be entered recursively."
+ `(without-interrupts
+ (%with-cas-lock (,place) ,@body)))
+
+(defmacro %with-cas-lock ((place) &body body &environment env)
+ (with-unique-names (owner self)
+ (multiple-value-bind (vars vals old new cas-form read-form)
+ (sb!ext:get-cas-expansion place env)
+ `(let* (,@(mapcar #'list vars vals)
+ (,owner (progn
+ (barrier (:read))
+ ,read-form))
+ (,self *current-thread*)
+ (,old nil)
+ (,new ,self))
+ (unwind-protect
+ (progn
+ (unless (eq ,owner ,self)
+ (loop until (loop repeat 100
+ when (and (progn
+ (barrier (:read))
+ (not ,read-form))
+ (not (setf ,owner ,cas-form)))
+ return t
+ else
+ do (sb!ext:spin-loop-hint))
+ do (thread-yield)))
+ ,@body)
+ (unless (eq ,owner ,self)
+ (let ((,old ,self)
+ (,new nil))
+ (unless (eq ,old ,cas-form)
+ (bug "Failed to release CAS lock!")))))))))
+
+;;; Conditions
+
+(define-condition thread-error (error)
+ ((thread :reader thread-error-thread :initarg :thread))
+ #!+sb-doc
+ (:documentation
+ "Conditions of type THREAD-ERROR are signalled when thread operations fail.
+The offending thread is initialized by the :THREAD initialization argument and
+read by the function THREAD-ERROR-THREAD."))
+
+(define-condition simple-thread-error (thread-error simple-condition)
+ ())
+
+(define-condition thread-deadlock (thread-error)
+ ((cycle :initarg :cycle :reader thread-deadlock-cycle))
+ (:report
+ (lambda (condition stream)
+ (let* ((*print-circle* t)
+ (cycle (thread-deadlock-cycle condition))
+ (start (caar cycle)))
+ (format stream "Deadlock cycle detected:~%")
+ (loop for part = (pop cycle)
+ while part
+ do (format stream " ~S~% waited for:~% ~S~% owned by:~%"
+ (car part)
+ (cdr part)))
+ (format stream " ~S~%" start)))))
+
+#!+sb-doc
+(setf
+ (fdocumentation 'thread-error-thread 'function)
+ "Return the offending thread that the THREAD-ERROR pertains to.")
+
+(define-condition symbol-value-in-thread-error (cell-error thread-error)
+ ((info :reader symbol-value-in-thread-error-info :initarg :info))
+ (:report
+ (lambda (condition stream)
+ (destructuring-bind (op problem)
+ (symbol-value-in-thread-error-info condition)
+ (format stream "Cannot ~(~A~) value of ~S in ~S: ~S"
+ op
+ (cell-error-name condition)
+ (thread-error-thread condition)
+ (ecase problem
+ (:unbound-in-thread "the symbol is unbound in thread.")
+ (:no-tls-value "the symbol has no thread-local value.")
+ (:thread-dead "the thread has exited.")
+ (:invalid-tls-value "the thread-local value is not valid."))))))
+ #!+sb-doc
+ (:documentation
+ "Signalled when SYMBOL-VALUE-IN-THREAD or its SETF version fails due to eg.
+the symbol not having a thread-local value, or the target thread having
+exited. The offending symbol can be accessed using CELL-ERROR-NAME, and the
+offending thread using THREAD-ERROR-THREAD."))
+
+(define-condition join-thread-error (thread-error)
+ ((problem :initarg :problem :reader join-thread-problem))
+ (:report (lambda (c s)
+ (ecase (join-thread-problem c)
+ (:abort
+ (format s "Joining thread failed: thread ~A ~
+ did not return normally."
+ (thread-error-thread c)))
+ (:timeout
+ (format s "Joining thread timed out: thread ~A ~
+ did not exit in time."
+ (thread-error-thread c))))))
+ #!+sb-doc
+ (:documentation
+ "Signalled when joining a thread fails due to abnormal exit of the thread
+to be joined. The offending thread can be accessed using
+THREAD-ERROR-THREAD."))
+
+(define-deprecated-function :late "1.0.29.17" join-thread-error-thread thread-error-thread
+ (condition)
+ (thread-error-thread condition))
+
+(define-condition interrupt-thread-error (thread-error) ()
+ (:report (lambda (c s)
+ (format s "Interrupt thread failed: thread ~A has exited."
+ (thread-error-thread c))))
+ #!+sb-doc
+ (:documentation
+ "Signalled when interrupting a thread fails because the thread has already
+exited. The offending thread can be accessed using THREAD-ERROR-THREAD."))
+
+(define-deprecated-function :late "1.0.29.17" interrupt-thread-error-thread thread-error-thread
+ (condition)
+ (thread-error-thread condition))
+
+;;; Of the WITH-PINNED-OBJECTS in this file, not every single one is
+;;; necessary because threads are only supported with the conservative
+;;; gencgc and numbers on the stack (returned by GET-LISP-OBJ-ADDRESS)
+;;; are treated as references.
+
+;;; set the doc here because in early-thread FDOCUMENTATION is not
+;;; available, yet
+#!+sb-doc
+(setf (fdocumentation '*current-thread* 'variable)
+ "Bound in each thread to the thread itself.")
+
+#!+sb-doc
+(setf
+ (fdocumentation 'thread-name 'function)
+ "Name of the thread. Can be assigned to using SETF. Thread names can be
+arbitrary printable objects, and need not be unique.")
+
+(def!method print-object ((thread thread) stream)
+ (print-unreadable-object (thread stream :type t :identity t)
+ (let* ((cookie (list thread))
+ (info (if (thread-alive-p thread)
+ :running
+ (multiple-value-list
+ (join-thread thread :default cookie))))
+ (state (if (eq :running info)
+ (let* ((thing (progn
+ (barrier (:read))
+ (thread-waiting-for thread))))
+ (typecase thing
+ (cons
+ (list "waiting on:" (cdr thing)
+ "timeout: " (car thing)))
+ (null
+ (list info))
+ (t
+ (list "waiting on:" thing))))
+ (if (eq cookie (car info))
+ (list :aborted)
+ :finished)))
+ (values (when (eq :finished state)
+ info))
+ (*print-level* 4))
+ (format stream
+ "~@[~S ~]~:[~{~I~A~^~2I~_ ~}~_~;~A~:[ no values~; values: ~:*~{~S~^, ~}~]~]"
+ (thread-name thread)
+ (eq :finished state)
+ state
+ values))))
+
+(defun print-lock (lock name owner stream)
+ (let ((*print-circle* t))
+ (print-unreadable-object (lock stream :type t :identity (not name))
+ (if owner
+ (format stream "~@[~S ~]~2I~_owner: ~S" name owner)
+ (format stream "~@[~S ~](free)" name)))))
+
+(def!method print-object ((mutex mutex) stream)
+ (print-lock mutex (mutex-name mutex) (mutex-owner mutex) stream))
+
+(defun thread-alive-p (thread)
+ #!+sb-doc
+ "Return T if THREAD is still alive. Note that the return value is
+potentially stale even before the function returns, as the thread may exit at
+any time."
+ (thread-%alive-p thread))
+
+(defun thread-emphemeral-p (thread)
+ #!+sb-doc
+ "Return T if THREAD is `ephemeral', which indicates that this thread is
+used by SBCL for internal purposes, and specifically that it knows how to
+to terminate this thread cleanly prior to core file saving without signalling
+an error in that case."
+ (thread-%ephemeral-p thread))
+
+;; A thread is eligible for gc iff it has finished and there are no
+;; more references to it. This list is supposed to keep a reference to
+;; all running threads.
+(defvar *all-threads* ())
+(defvar *all-threads-lock* (make-mutex :name "all threads lock"))
+
+(defvar *default-alloc-signal* nil)
+
+(defmacro with-all-threads-lock (&body body)
+ `(with-system-mutex (*all-threads-lock*)
+ ,@body))
+
+(defun list-all-threads ()
+ #!+sb-doc
+ "Return a list of the live threads. Note that the return value is
+potentially stale even before the function returns, as new threads may be
+created and old ones may exit at any time."
+ (with-all-threads-lock
+ (copy-list *all-threads*)))
+
+(declaim (inline current-thread-sap))
+(defun current-thread-sap ()
+ (sb!vm::current-thread-offset-sap sb!vm::thread-this-slot))
+
+(declaim (inline current-thread-os-thread))
+(defun current-thread-os-thread ()
+ #!+sb-thread
+ (sap-int (sb!vm::current-thread-offset-sap sb!vm::thread-os-thread-slot))
+ #!-sb-thread
+ 0)
+
+(defvar *initial-thread* nil)
+(defvar *make-thread-lock*)
+
+(defun init-initial-thread ()
+ (/show0 "Entering INIT-INITIAL-THREAD")
+ (setf sb!impl::*exit-lock* (make-mutex :name "Exit Lock")
+ *make-thread-lock* (make-mutex :name "Make-Thread Lock"))
+ (let ((initial-thread (%make-thread :name "main thread"
+ :%alive-p t
+ :os-thread (current-thread-os-thread))))
+ (setq *initial-thread* initial-thread
+ *current-thread* initial-thread)
+ (grab-mutex (thread-result-lock *initial-thread*))
+ ;; Either *all-threads* is empty or it contains exactly one thread
+ ;; in case we are in reinit since saving core with multiple
+ ;; threads doesn't work.
+ (setq *all-threads* (list initial-thread))))
+
+(defun main-thread ()
+ "Returns the main thread of the process."
+ *initial-thread*)
+
+(defun main-thread-p (&optional (thread *current-thread*))
+ "True if THREAD, defaulting to current thread, is the main thread of the process."
+ (eq thread *initial-thread*))
+
+(defmacro return-from-thread (values-form &key allow-exit)
+ "Unwinds from and terminates the current thread, with values from
+VALUES-FORM as the results visible to JOIN-THREAD.
+
+If current thread is the main thread of the process (see
+MAIN-THREAD-P), signals an error unless ALLOW-EXIT is true, as
+terminating the main thread would terminate the entire process. If
+ALLOW-EXIT is true, returning from the main thread is equivalent to
+calling SB-EXT:EXIT with :CODE 0 and :ABORT NIL.
+
+See also: ABORT-THREAD and SB-EXT:EXIT."
+ `(%return-from-thread (multiple-value-list ,values-form) ,allow-exit))
+
+(defun %return-from-thread (values allow-exit)
+ (let ((self *current-thread*))
+ (cond ((main-thread-p self)
+ (unless allow-exit
+ (error 'simple-thread-error
+ :format-control "~@<Tried to return ~S as values from main thread, ~
+ but exit was not allowed.~:@>"
+ :format-arguments (list values)
+ :thread self))
+ (sb!ext:exit :code 0))
+ (t
+ (throw '%return-from-thread (values-list values))))))
+
+(defun abort-thread (&key allow-exit)
+ "Unwinds from and terminates the current thread abnormally, causing
+JOIN-THREAD on current thread to signal an error unless a
+default-value is provided.
+
+If current thread is the main thread of the process (see
+MAIN-THREAD-P), signals an error unless ALLOW-EXIT is true, as
+terminating the main thread would terminate the entire process. If
+ALLOW-EXIT is true, aborting the main thread is equivalent to calling
+SB-EXT:EXIT code 1 and :ABORT NIL.
+
+Invoking the initial ABORT restart estabilished by MAKE-THREAD is
+equivalent to calling ABORT-THREAD in other than main threads.
+However, whereas ABORT restart may be rebound, ABORT-THREAD always
+unwinds the entire thread. (Behaviour of the initial ABORT restart for
+main thread depends on the :TOPLEVEL argument to
+SB-EXT:SAVE-LISP-AND-DIE.)
+
+See also: RETURN-FROM-THREAD and SB-EXT:EXIT."
+ (let ((self *current-thread*))
+ (cond ((main-thread-p self)
+ (unless allow-exit
+ (error 'simple-thread-error
+ :format-control "~@<Tried to abort initial thread, but ~
+ exit was not allowed.~:@>"))
+ (sb!ext:exit :code 1))
+ (t
+ ;; We /could/ use TOPLEVEL-CATCHER or %END-OF-THE-WORLD as well, but
+ ;; this seems tidier. Those to are a bit too overloaded already.
+ (throw '%abort-thread t)))))
+\f
+
+;;;; Aliens, low level stuff
+
+(define-alien-routine "kill_safely"
+ integer
+ (os-thread #!-alpha unsigned-long #!+alpha unsigned-int)
+ (signal int))
+
+(define-alien-routine "wake_thread"
+ integer
+ (os-thread #!-alpha unsigned-long #!+alpha unsigned-int))
+
+#!+sb-thread
+(progn
+ ;; FIXME it would be good to define what a thread id is or isn't
+ ;; (our current assumption is that it's a fixnum). It so happens
+ ;; that on Linux it's a pid, but it might not be on posix thread
+ ;; implementations.
+ (define-alien-routine ("create_thread" %create-thread)
+ unsigned-long (lisp-fun-address unsigned-long))
-;;;; queues, locks
+ (declaim (inline %block-deferrable-signals))
+ (define-alien-routine ("block_deferrable_signals" %block-deferrable-signals)
+ void
+ (where sb!alien:unsigned-long)
+ (old sb!alien:unsigned-long))
-;; spinlocks use 0 as "free" value: higher-level locks use NIL
-(declaim (inline get-spinlock release-spinlock))
+ (defun block-deferrable-signals ()
+ (%block-deferrable-signals 0 0))
-(defun get-spinlock (lock offset new-value)
- (declare (optimize (speed 3) (safety 0)))
- (loop until
- (eql (sb!vm::%instance-set-conditional lock offset 0 new-value) 0)))
+ #!+sb-futex
+ (progn
+ (declaim (inline futex-wait %futex-wait futex-wake))
+
+ (define-alien-routine ("futex_wait" %futex-wait)
+ int (word unsigned-long) (old-value unsigned-long)
+ (to-sec long) (to-usec unsigned-long))
+
+ (defun futex-wait (word old to-sec to-usec)
+ (with-interrupts
+ (%futex-wait word old to-sec to-usec)))
-;; this should do nothing if we didn't own the lock, so safe to use in
-;; unwind-protect cleanups when lock acquisition failed for some reason
-(defun release-spinlock (lock offset our-value)
- (declare (optimize (speed 3) (safety 0)))
- (sb!vm::%instance-set-conditional lock offset our-value 0))
+ (define-alien-routine "futex_wake"
+ int (word unsigned-long) (n unsigned-long))))
-(defmacro with-spinlock ((queue) &body body)
- (with-unique-names (pid)
- `(let ((,pid (current-thread-id)))
+;;; used by debug-int.lisp to access interrupt contexts
+#!-(or sb-fluid sb-thread) (declaim (inline sb!vm::current-thread-offset-sap))
+#!-sb-thread
+(defun sb!vm::current-thread-offset-sap (n)
+ (declare (type (unsigned-byte 27) n))
+ (sap-ref-sap (alien-sap (extern-alien "all_threads" (* t)))
+ (* n sb!vm:n-word-bytes)))
+
+#!+sb-thread
+(defun sb!vm::current-thread-offset-sap (n)
+ (declare (type (unsigned-byte 27) n))
+ (sb!vm::current-thread-offset-sap n))
+\f
+
+(defmacro with-deadlocks ((thread lock &optional (timeout nil timeoutp)) &body forms)
+ (with-unique-names (n-thread n-lock new n-timeout)
+ `(let* ((,n-thread ,thread)
+ (,n-lock ,lock)
+ (,n-timeout ,(when timeoutp
+ `(or ,timeout
+ (when sb!impl::*deadline*
+ sb!impl::*deadline-seconds*))))
+ (,new (if ,n-timeout
+ ;; Using CONS tells the rest of the system there's a
+ ;; timeout in place, so it isn't considered a deadlock.
+ (cons ,n-timeout ,n-lock)
+ ,n-lock)))
+ (declare (dynamic-extent ,new))
+ ;; No WITHOUT-INTERRUPTS, since WITH-DEADLOCKS is used
+ ;; in places where interrupts should already be disabled.
(unwind-protect
- (progn
- (get-spinlock ,queue 2 ,pid)
- ,@body)
- (release-spinlock ,queue 2 ,pid)))))
-
-
-;;;; the higher-level locking operations are based on waitqueues
-
-(declaim (inline waitqueue-data-address mutex-value-address))
-
-(defstruct waitqueue
- (name nil :type (or null simple-base-string))
- (lock 0)
- (data nil))
-
-;;; The bare 4 here and 5 below are offsets of the slots in the struct.
-;;; There ought to be some better way to get these numbers
-(defun waitqueue-data-address (lock)
- (declare (optimize (speed 3)))
- (sb!ext:truly-the
- (unsigned-byte 32)
- (+ (sb!kernel:get-lisp-obj-address lock)
- (- (* 4 sb!vm:n-word-bytes) sb!vm:instance-pointer-lowtag))))
-
-(defstruct (mutex (:include waitqueue))
- (value nil))
-
-(defun mutex-value-address (lock)
- (declare (optimize (speed 3)))
- (sb!ext:truly-the
- (unsigned-byte 32)
- (+ (sb!kernel:get-lisp-obj-address lock)
- (- (* 5 sb!vm:n-word-bytes) sb!vm:instance-pointer-lowtag))))
-
-(sb!alien:define-alien-routine "block_sigcont" void)
-(sb!alien:define-alien-routine "unblock_sigcont_and_sleep" void)
-
-#!+sb-futex
-(declaim (inline futex-wait futex-wake))
-#!+sb-futex
-(sb!alien:define-alien-routine
- "futex_wait" int (word unsigned-long) (old-value unsigned-long))
-#!+sb-futex
-(sb!alien:define-alien-routine
- "futex_wake" int (word unsigned-long) (n unsigned-long))
-
-
-;;; this should only be called while holding the queue spinlock.
-;;; it releases the spinlock before sleeping
-(defun wait-on-queue (queue &optional lock)
- (let ((pid (current-thread-id)))
- (block-sigcont)
- (when lock (release-mutex lock))
- (sb!sys:without-interrupts
- (pushnew pid (waitqueue-data queue)))
- (setf (waitqueue-lock queue) 0)
- (unblock-sigcont-and-sleep)))
-
-;;; this should only be called while holding the queue spinlock. It doesn't
-;;; release it
-(defun dequeue (queue)
- (let ((pid (current-thread-id)))
- (sb!sys:without-interrupts
- (setf (waitqueue-data queue)
- (delete pid (waitqueue-data queue))))))
-
-;;; this should only be called while holding the queue spinlock.
-(defun signal-queue-head (queue)
- (let ((p (car (waitqueue-data queue))))
- (when p (signal-thread-to-dequeue p))))
-
-;;;; mutex
-
-;;; i suspect there may be a race still in this: the futex version requires
-;;; the old mutex value before sleeping, so how do we get away without it
-(defun get-mutex (lock &optional new-value (wait-p t))
- (declare (type mutex lock) (optimize (speed 3)))
- (let ((pid (current-thread-id)))
- (unless new-value (setf new-value pid))
- (assert (not (eql new-value (mutex-value lock))))
- (get-spinlock lock 2 pid)
- (loop
- (unless
- ;; args are object slot-num old-value new-value
- (sb!vm::%instance-set-conditional lock 4 nil new-value)
- (dequeue lock)
- (setf (waitqueue-lock lock) 0)
- (return t))
- (unless wait-p
- (setf (waitqueue-lock lock) 0)
- (return nil))
- (wait-on-queue lock nil))))
-
-#!+sb-futex
-(defun get-mutex/futex (lock &optional new-value (wait-p t))
- (declare (type mutex lock) (optimize (speed 3)))
- (let ((pid (current-thread-id))
- old)
- (unless new-value (setf new-value pid))
- (assert (not (eql new-value (mutex-value lock))))
- (loop
- (unless
- (setf old (sb!vm::%instance-set-conditional lock 4 nil new-value))
- (return t))
- (unless wait-p (return nil))
- (futex-wait (mutex-value-address lock)
- (sb!kernel:get-lisp-obj-address old)))))
-
-(defun release-mutex (lock &optional (new-value nil))
- (declare (type mutex lock))
- ;; we assume the lock is ours to release
- (with-spinlock (lock)
- (setf (mutex-value lock) new-value)
- (signal-queue-head lock)))
-
-#!+sb-futex
-(defun release-mutex/futex (lock)
- (declare (type mutex lock))
- (setf (mutex-value lock) nil)
- (futex-wake (mutex-value-address lock) 1))
-
-;;;; condition variables
-
-(defun condition-wait (queue lock)
- "Atomically release LOCK and enqueue ourselves on QUEUE. Another
-thread may subsequently notify us using CONDITION-NOTIFY, at which
-time we reacquire LOCK and return to the caller."
- (assert lock)
- (let ((value (mutex-value lock)))
- (unwind-protect
- (progn
- (get-spinlock queue 2 (current-thread-id))
- (wait-on-queue queue lock))
- ;; If we are interrupted while waiting, we should do these things
- ;; before returning. Ideally, in the case of an unhandled signal,
- ;; we should do them before entering the debugger, but this is
- ;; better than nothing.
- (with-spinlock (queue)
- (dequeue queue))
- (get-mutex lock value))))
-
-#!+sb-futex
-(defun condition-wait/futex (queue lock)
- (assert lock)
- (let ((value (mutex-value lock)))
- (unwind-protect
- (let ((me (current-thread-id)))
- ;; XXX we should do something to ensure that the result of this setf
- ;; is visible to all CPUs
- (setf (waitqueue-data queue) me)
- (release-mutex lock)
- ;; Now we go to sleep using futex-wait. If anyone else
- ;; manages to grab LOCK and call CONDITION-NOTIFY during
- ;; this comment, it will change queue->data, and so
- ;; futex-wait returns immediately instead of sleeping.
- ;; Ergo, no lost wakeup
- (futex-wait (waitqueue-data-address queue)
- (sb!kernel:get-lisp-obj-address me)))
- ;; If we are interrupted while waiting, we should do these things
- ;; before returning. Ideally, in the case of an unhandled signal,
- ;; we should do them before entering the debugger, but this is
- ;; better than nothing.
- (get-mutex lock value))))
-
-
-(defun condition-notify (queue)
- "Notify one of the processes waiting on QUEUE"
- (with-spinlock (queue) (signal-queue-head queue)))
-
-#!+sb-futex
-(defun condition-notify/futex (queue)
- "Notify one of the processes waiting on QUEUE."
- (let ((me (current-thread-id)))
- ;; no problem if >1 thread notifies during the comment in
- ;; condition-wait: as long as the value in queue-data isn't the
- ;; waiting thread's id, it matters not what it is
- ;; XXX we should do something to ensure that the result of this setf
- ;; is visible to all CPUs
- (setf (waitqueue-data queue) me)
- (futex-wake (waitqueue-data-address queue) 1)))
+ (progn
+ (setf (thread-waiting-for ,n-thread) ,new)
+ (barrier (:write))
+ ,@forms)
+ ;; Interrupt handlers and GC save and restore any
+ ;; previous wait marks using WITHOUT-DEADLOCKS below.
+ (setf (thread-waiting-for ,n-thread) nil)
+ (barrier (:write))))))
+\f
+;;;; Mutexes
-#!+sb-futex
-(defun condition-broadcast/futex (queue)
- (let ((me (current-thread-id)))
- (setf (waitqueue-data queue) me)
- (futex-wake (waitqueue-data-address queue) (ash 1 30))))
+#!+sb-doc
+(setf (fdocumentation 'make-mutex 'function)
+ "Create a mutex."
+ (fdocumentation 'mutex-name 'function)
+ "The name of the mutex. Setfable.")
-(defun condition-broadcast (queue)
- "Notify all of the processes waiting on QUEUE."
- (with-spinlock (queue)
- (map nil #'signal-thread-to-dequeue (waitqueue-data queue))))
+#!+(and sb-thread sb-futex)
+(progn
+ (define-structure-slot-addressor mutex-state-address
+ :structure mutex
+ :slot state)
+ ;; Important: current code assumes these are fixnums or other
+ ;; lisp objects that don't need pinning.
+ (defconstant +lock-free+ 0)
+ (defconstant +lock-taken+ 1)
+ (defconstant +lock-contested+ 2))
+
+(defun mutex-owner (mutex)
+ "Current owner of the mutex, NIL if the mutex is free. Naturally,
+this is racy by design (another thread may acquire the mutex after
+this function returns), it is intended for informative purposes. For
+testing whether the current thread is holding a mutex see
+HOLDING-MUTEX-P."
+ ;; Make sure to get the current value.
+ (sb!ext:compare-and-swap (mutex-%owner mutex) nil nil))
+
+(sb!ext:defglobal **deadlock-lock** nil)
-;;; Futexes may be available at compile time but not runtime, so we
-;;; default to not using them unless os_init says they're available
-(defun maybe-install-futex-functions ()
+;;; Signals an error if owner of LOCK is waiting on a lock whose release
+;;; depends on the current thread. Does not detect deadlocks from sempahores.
+(defun check-deadlock ()
+ (let* ((self *current-thread*)
+ (origin (progn
+ (barrier (:read))
+ (thread-waiting-for self))))
+ (labels ((detect-deadlock (lock)
+ (let ((other-thread (mutex-%owner lock)))
+ (cond ((not other-thread))
+ ((eq self other-thread)
+ (let ((chain
+ (with-cas-lock ((symbol-value '**deadlock-lock**))
+ (prog1 (deadlock-chain self origin)
+ ;; We're now committed to signaling the
+ ;; error and breaking the deadlock, so
+ ;; mark us as no longer waiting on the
+ ;; lock. This ensures that a single
+ ;; deadlock is reported in only one
+ ;; thread, and that we don't look like
+ ;; we're waiting on the lock when print
+ ;; stuff -- because that may lead to
+ ;; further deadlock checking, in turn
+ ;; possibly leading to a bogus vicious
+ ;; metacycle on PRINT-OBJECT.
+ (setf (thread-waiting-for self) nil)))))
+ (error 'thread-deadlock
+ :thread *current-thread*
+ :cycle chain)))
+ (t
+ (let ((other-lock (progn
+ (barrier (:read))
+ (thread-waiting-for other-thread))))
+ ;; If the thread is waiting with a timeout OTHER-LOCK
+ ;; is a cons, and we don't consider it a deadlock -- since
+ ;; it will time out on its own sooner or later.
+ (when (mutex-p other-lock)
+ (detect-deadlock other-lock)))))))
+ (deadlock-chain (thread lock)
+ (let* ((other-thread (mutex-owner lock))
+ (other-lock (when other-thread
+ (barrier (:read))
+ (thread-waiting-for other-thread))))
+ (cond ((not other-thread)
+ ;; The deadlock is gone -- maybe someone unwound
+ ;; from the same deadlock already?
+ (return-from check-deadlock nil))
+ ((consp other-lock)
+ ;; There's a timeout -- no deadlock.
+ (return-from check-deadlock nil))
+ ((waitqueue-p other-lock)
+ ;; Not a lock.
+ (return-from check-deadlock nil))
+ ((eq self other-thread)
+ ;; Done
+ (list (list thread lock)))
+ (t
+ (if other-lock
+ (cons (cons thread lock)
+ (deadlock-chain other-thread other-lock))
+ ;; Again, the deadlock is gone?
+ (return-from check-deadlock nil)))))))
+ ;; Timeout means there is no deadlock
+ (when (mutex-p origin)
+ (detect-deadlock origin)
+ t))))
+
+(defun %try-mutex (mutex new-owner)
+ (declare (type mutex mutex) (optimize (speed 3)))
+ (barrier (:read))
+ (let ((old (mutex-%owner mutex)))
+ (when (eq new-owner old)
+ (error "Recursive lock attempt ~S." mutex))
+ #!-sb-thread
+ (when old
+ (error "Strange deadlock on ~S in an unithreaded build?" mutex))
+ #!-(and sb-thread sb-futex)
+ (and (not old)
+ ;; Don't even bother to try to CAS if it looks bad.
+ (not (sb!ext:compare-and-swap (mutex-%owner mutex) nil new-owner)))
+ #!+(and sb-thread sb-futex)
+ ;; From the Mutex 2 algorithm from "Futexes are Tricky" by Ulrich Drepper.
+ (when (eql +lock-free+ (sb!ext:compare-and-swap (mutex-state mutex)
+ +lock-free+
+ +lock-taken+))
+ (let ((prev (sb!ext:compare-and-swap (mutex-%owner mutex) nil new-owner)))
+ (when prev
+ (bug "Old owner in free mutex: ~S" prev))
+ t))))
+
+#!+sb-thread
+(defun %%wait-for-mutex (mutex new-owner to-sec to-usec stop-sec stop-usec)
+ (declare (type mutex mutex) (optimize (speed 3)))
+ #!-sb-futex
+ (declare (ignore to-sec to-usec))
+ #!-sb-futex
+ (flet ((cas ()
+ (loop repeat 100
+ when (and (progn
+ (barrier (:read))
+ (not (mutex-%owner mutex)))
+ (not (sb!ext:compare-and-swap (mutex-%owner mutex) nil
+ new-owner)))
+ do (return-from cas t)
+ else
+ do
+ (sb!ext:spin-loop-hint))
+ ;; Check for pending interrupts.
+ (with-interrupts nil)))
+ (declare (dynamic-extent #'cas))
+ (sb!impl::%%wait-for #'cas stop-sec stop-usec))
#!+sb-futex
- (unless (zerop (extern-alien "linux_supports_futex" int))
- (sb!ext:without-package-locks
- (setf (fdefinition 'get-mutex) #'get-mutex/futex
- (fdefinition 'release-mutex) #'release-mutex/futex
- (fdefinition 'condition-wait) #'condition-wait/futex
- (fdefinition 'condition-broadcast) #'condition-broadcast/futex
- (fdefinition 'condition-notify) #'condition-notify/futex))
- t))
-
-(defun make-thread (function)
- (let* ((real-function (coerce function 'function))
- (tid
- (%create-thread
- (sb!kernel:get-lisp-obj-address
- (lambda ()
- ;; in time we'll move some of the binding presently done in C
- ;; here too
- (let ((sb!kernel::*restart-clusters* nil)
- (sb!impl::*descriptor-handlers* nil) ; serve-event
- (sb!impl::*available-buffers* nil)) ;for fd-stream
- ;; can't use handling-end-of-the-world, because that flushes
- ;; output streams, and we don't necessarily have any (or we
- ;; could be sharing them)
- (sb!sys:enable-interrupt sb!unix:sigint :ignore)
- (sb!unix:unix-exit
- (catch 'sb!impl::%end-of-the-world
- (with-simple-restart
- (destroy-thread
- (format nil "~~@<Destroy this thread (~A)~~@:>"
- (current-thread-id)))
- (funcall real-function))
- 0))))))))
- (with-mutex ((session-lock *session*))
- (pushnew tid (session-threads *session*)))
- tid))
-
-;;; Really, you don't want to use these: they'll get into trouble with
-;;; garbage collection. Use a lock or a waitqueue instead
-(defun suspend-thread (thread-id)
- (sb!unix:unix-kill thread-id sb!unix:sigstop))
-(defun resume-thread (thread-id)
- (sb!unix:unix-kill thread-id sb!unix:sigcont))
-;;; Note warning about cleanup forms
-(defun destroy-thread (thread-id)
- "Destroy the thread identified by THREAD-ID abruptly, without running cleanup forms"
- (sb!unix:unix-kill thread-id sb!unix:sigterm)
- ;; may have been stopped for some reason, so now wake it up to
- ;; deliver the TERM
- (sb!unix:unix-kill thread-id sb!unix:sigcont))
-
-
-
-
-;;; a moderate degree of care is expected for use of interrupt-thread,
-;;; due to its nature: if you interrupt a thread that was holding
-;;; important locks then do something that turns out to need those
-;;; locks, you probably won't like the effect. Used with thought
-;;; though, it's a good deal gentler than the last-resort functions above
+ ;; This is a fairly direct translation of the Mutex 2 algorithm from
+ ;; "Futexes are Tricky" by Ulrich Drepper.
+ (flet ((maybe (old)
+ (when (eql +lock-free+ old)
+ (let ((prev (sb!ext:compare-and-swap (mutex-%owner mutex)
+ nil new-owner)))
+ (when prev
+ (bug "Old owner in free mutex: ~S" prev))
+ (return-from %%wait-for-mutex t)))))
+ (prog ((old (sb!ext:compare-and-swap (mutex-state mutex)
+ +lock-free+ +lock-taken+)))
+ ;; Got it right off the bat?
+ (maybe old)
+ :retry
+ ;; Mark it as contested, and sleep. (Exception: it was just released.)
+ (when (or (eql +lock-contested+ old)
+ (not (eql +lock-free+
+ (sb!ext:compare-and-swap
+ (mutex-state mutex) +lock-taken+ +lock-contested+))))
+ (when (eql 1 (with-pinned-objects (mutex)
+ (futex-wait (mutex-state-address mutex)
+ (get-lisp-obj-address +lock-contested+)
+ (or to-sec -1)
+ (or to-usec 0))))
+ ;; -1 = EWOULDBLOCK, possibly spurious wakeup
+ ;; 0 = normal wakeup
+ ;; 1 = ETIMEDOUT ***DONE***
+ ;; 2 = EINTR, a spurious wakeup
+ (return-from %%wait-for-mutex nil)))
+ ;; Try to get it, still marking it as contested.
+ (maybe
+ (sb!ext:compare-and-swap (mutex-state mutex) +lock-free+ +lock-contested+))
+ ;; Update timeout if necessary.
+ (when stop-sec
+ (setf (values to-sec to-usec)
+ (sb!impl::relative-decoded-times stop-sec stop-usec)))
+ ;; Spin.
+ (go :retry))))
-(defun interrupt-thread (thread function)
- "Interrupt THREAD and make it run FUNCTION."
- (let ((function (coerce function 'function)))
- (sb!sys:with-pinned-objects (function)
- (sb!unix::syscall* ("interrupt_thread"
- sb!alien:unsigned-long sb!alien:unsigned-long)
- thread
- thread
- (sb!kernel:get-lisp-obj-address function)))))
-
-(defun terminate-thread (thread-id)
- "Terminate the thread identified by THREAD-ID, by causing it to run
-SB-EXT:QUIT - the usual cleanup forms will be evaluated"
- (interrupt-thread thread-id 'sb!ext:quit))
-
-(declaim (inline current-thread-id))
-(defun current-thread-id ()
- (logand
- (sb!sys:sap-int
- (sb!vm::current-thread-offset-sap sb!vm::thread-pid-slot))
- ;; KLUDGE pids are 16 bit really. Avoid boxing the return value
- (1- (ash 1 16))))
-
-;;;; iterate over the in-memory threads
-
-(defun mapcar-threads (function)
- "Call FUNCTION once for each known thread, giving it the thread structure as argument"
- (let ((function (coerce function 'function)))
- (loop for thread = (alien-sap (extern-alien "all_threads" (* t)))
- then (sb!sys:sap-ref-sap thread (* 4 sb!vm::thread-next-slot))
- until (sb!sys:sap= thread (sb!sys:int-sap 0))
- collect (funcall function thread))))
-
-;;;; job control, independent listeners
-
-(defstruct session
- (lock (make-mutex))
+#!+sb-thread
+(defun %wait-for-mutex (mutex self timeout to-sec to-usec stop-sec stop-usec deadlinep)
+ (with-deadlocks (self mutex timeout)
+ (with-interrupts (check-deadlock))
+ (tagbody
+ :again
+ (return-from %wait-for-mutex
+ (or (%%wait-for-mutex mutex self to-sec to-usec stop-sec stop-usec)
+ (when deadlinep
+ (signal-deadline)
+ ;; FIXME: substract elapsed time from timeout...
+ (setf (values to-sec to-usec stop-sec stop-usec deadlinep)
+ (decode-timeout timeout))
+ (go :again)))))))
+
+(define-deprecated-function :early "1.0.37.33" get-mutex (grab-mutex)
+ (mutex &optional new-owner (waitp t) (timeout nil))
+ (declare (ignorable waitp timeout))
+ (let ((new-owner (or new-owner *current-thread*)))
+ (or (%try-mutex mutex new-owner)
+ #!+sb-thread
+ (when waitp
+ (multiple-value-call #'%wait-for-mutex
+ mutex new-owner timeout (decode-timeout timeout))))))
+
+(defun grab-mutex (mutex &key (waitp t) (timeout nil))
+ #!+sb-doc
+ "Acquire MUTEX for the current thread. If WAITP is true (the default) and
+the mutex is not immediately available, sleep until it is available.
+
+If TIMEOUT is given, it specifies a relative timeout, in seconds, on how long
+GRAB-MUTEX should try to acquire the lock in the contested case.
+
+If GRAB-MUTEX returns T, the lock acquisition was successful. In case of WAITP
+being NIL, or an expired TIMEOUT, GRAB-MUTEX may also return NIL which denotes
+that GRAB-MUTEX did -not- acquire the lock.
+
+Notes:
+
+ - GRAB-MUTEX is not interrupt safe. The correct way to call it is:
+
+ (WITHOUT-INTERRUPTS
+ ...
+ (ALLOW-WITH-INTERRUPTS (GRAB-MUTEX ...))
+ ...)
+
+ WITHOUT-INTERRUPTS is necessary to avoid an interrupt unwinding the call
+ while the mutex is in an inconsistent state while ALLOW-WITH-INTERRUPTS
+ allows the call to be interrupted from sleep.
+
+ - (GRAB-MUTEX <mutex> :timeout 0.0) differs from
+ (GRAB-MUTEX <mutex> :waitp nil) in that the former may signal a
+ DEADLINE-TIMEOUT if the global deadline was due already on entering
+ GRAB-MUTEX.
+
+ The exact interplay of GRAB-MUTEX and deadlines are reserved to change in
+ future versions.
+
+ - It is recommended that you use WITH-MUTEX instead of calling GRAB-MUTEX
+ directly.
+"
+ (declare (ignorable waitp timeout))
+ (let ((self *current-thread*))
+ (or (%try-mutex mutex self)
+ #!+sb-thread
+ (when waitp
+ (multiple-value-call #'%wait-for-mutex
+ mutex self timeout (decode-timeout timeout))))))
+
+(defun release-mutex (mutex &key (if-not-owner :punt))
+ #!+sb-doc
+ "Release MUTEX by setting it to NIL. Wake up threads waiting for
+this mutex.
+
+RELEASE-MUTEX is not interrupt safe: interrupts should be disabled
+around calls to it.
+
+If the current thread is not the owner of the mutex then it silently
+returns without doing anything (if IF-NOT-OWNER is :PUNT), signals a
+WARNING (if IF-NOT-OWNER is :WARN), or releases the mutex anyway (if
+IF-NOT-OWNER is :FORCE)."
+ (declare (type mutex mutex))
+ ;; Order matters: set owner to NIL before releasing state.
+ (let* ((self *current-thread*)
+ (old-owner (sb!ext:compare-and-swap (mutex-%owner mutex) self nil)))
+ (unless (eq self old-owner)
+ (ecase if-not-owner
+ ((:punt) (return-from release-mutex nil))
+ ((:warn)
+ (warn "Releasing ~S, owned by another thread: ~S" mutex old-owner))
+ ((:force)))
+ (setf (mutex-%owner mutex) nil)
+ ;; FIXME: Is a :memory barrier too strong here? Can we use a :write
+ ;; barrier instead?
+ (barrier (:memory)))
+ #!+(and sb-thread sb-futex)
+ (when old-owner
+ ;; FIXME: once ATOMIC-INCF supports struct slots with word sized
+ ;; unsigned-byte type this can be used:
+ ;;
+ ;; (let ((old (sb!ext:atomic-incf (mutex-state mutex) -1)))
+ ;; (unless (eql old +lock-free+)
+ ;; (setf (mutex-state mutex) +lock-free+)
+ ;; (with-pinned-objects (mutex)
+ ;; (futex-wake (mutex-state-address mutex) 1))))
+ (let ((old (sb!ext:compare-and-swap (mutex-state mutex)
+ +lock-taken+ +lock-free+)))
+ (when (eql old +lock-contested+)
+ (sb!ext:compare-and-swap (mutex-state mutex)
+ +lock-contested+ +lock-free+)
+ (with-pinned-objects (mutex)
+ (futex-wake (mutex-state-address mutex) 1))))
+ nil)))
+\f
+
+;;;; Waitqueues/condition variables
+
+#!+(or (not sb-thread) sb-futex)
+(defstruct (waitqueue (:constructor %make-waitqueue))
+ #!+sb-doc
+ "Waitqueue type."
+ (name nil :type (or null thread-name))
+ #!+(and sb-thread sb-futex)
+ (token nil))
+
+#!+(and sb-thread (not sb-futex))
+(progn
+ (defstruct (waitqueue (:constructor %make-waitqueue))
+ #!+sb-doc
+ "Waitqueue type."
+ (name nil :type (or null thread-name))
+ ;; For WITH-CAS-LOCK: because CONDITION-WAIT must be able to call
+ ;; %WAITQUEUE-WAKEUP without re-aquiring the mutex, we need a separate
+ ;; lock. In most cases this should be uncontested thanks to the mutex --
+ ;; the only case where that might not be true is when CONDITION-WAIT
+ ;; unwinds and %WAITQUEUE-DROP is called.
+ %owner
+ %head
+ %tail)
+
+ (defun %waitqueue-enqueue (thread queue)
+ (setf (thread-waiting-for thread) queue)
+ (let ((head (waitqueue-%head queue))
+ (tail (waitqueue-%tail queue))
+ (new (list thread)))
+ (unless head
+ (setf (waitqueue-%head queue) new))
+ (when tail
+ (setf (cdr tail) new))
+ (setf (waitqueue-%tail queue) new)
+ nil))
+ (defun %waitqueue-drop (thread queue)
+ (setf (thread-waiting-for thread) nil)
+ (let ((head (waitqueue-%head queue)))
+ (do ((list head (cdr list))
+ (prev nil list))
+ ((or (null list)
+ (eq (car list) thread))
+ (when list
+ (let ((rest (cdr list)))
+ (cond (prev
+ (setf (cdr prev) rest))
+ (t
+ (setf (waitqueue-%head queue) rest
+ prev rest)))
+ (unless rest
+ (setf (waitqueue-%tail queue) prev)))))))
+ nil)
+ (defun %waitqueue-wakeup (queue n)
+ (declare (fixnum n))
+ (loop while (plusp n)
+ for next = (let ((head (waitqueue-%head queue))
+ (tail (waitqueue-%tail queue)))
+ (when head
+ (if (eq head tail)
+ (setf (waitqueue-%head queue) nil
+ (waitqueue-%tail queue) nil)
+ (setf (waitqueue-%head queue) (cdr head)))
+ (car head)))
+ while next
+ do (when (eq queue (sb!ext:compare-and-swap
+ (thread-waiting-for next) queue nil))
+ (decf n)))
+ nil))
+
+(def!method print-object ((waitqueue waitqueue) stream)
+ (print-unreadable-object (waitqueue stream :type t :identity t)
+ (format stream "~@[~A~]" (waitqueue-name waitqueue))))
+
+(defun make-waitqueue (&key name)
+ #!+sb-doc
+ "Create a waitqueue."
+ (%make-waitqueue :name name))
+
+#!+sb-doc
+(setf (fdocumentation 'waitqueue-name 'function)
+ "The name of the waitqueue. Setfable.")
+
+#!+(and sb-thread sb-futex)
+(define-structure-slot-addressor waitqueue-token-address
+ :structure waitqueue
+ :slot token)
+
+(defun condition-wait (queue mutex &key timeout)
+ #!+sb-doc
+ "Atomically release MUTEX and start waiting on QUEUE for till another thread
+wakes us up using either CONDITION-NOTIFY or CONDITION-BROADCAST on that
+queue, at which point we re-acquire MUTEX and return T.
+
+Spurious wakeups are possible.
+
+If TIMEOUT is given, it is the maximum number of seconds to wait, including
+both waiting for the wakeup and the time to re-acquire MUTEX. Unless both
+wakeup and re-acquisition do not occur within the given time, returns NIL
+without re-acquiring the mutex.
+
+If CONDITION-WAIT unwinds, it may do so with or without the mutex being held.
+
+Important: Since CONDITION-WAIT may return without CONDITION-NOTIFY having
+occurred the correct way to write code that uses CONDITION-WAIT is to loop
+around the call, checking the the associated data:
+
+ (defvar *data* nil)
+ (defvar *queue* (make-waitqueue))
+ (defvar *lock* (make-mutex))
+
+ ;; Consumer
+ (defun pop-data (&optional timeout)
+ (with-mutex (*lock*)
+ (loop until *data*
+ do (or (condition-wait *queue* *lock* :timeout timeout)
+ ;; Lock not held, must unwind without touching *data*.
+ (return-from pop-data nil)))
+ (pop *data*)))
+
+ ;; Producer
+ (defun push-data (data)
+ (with-mutex (*lock*)
+ (push data *data*)
+ (condition-notify *queue*)))
+"
+ #!-sb-thread
+ (declare (ignore queue))
+ (assert mutex)
+ #!-sb-thread
+ (sb!ext:wait-for nil :timeout timeout) ; Yeah...
+ #!+sb-thread
+ (let ((me *current-thread*))
+ (barrier (:read))
+ (assert (eq me (mutex-%owner mutex)))
+ (multiple-value-bind (to-sec to-usec stop-sec stop-usec deadlinep)
+ (decode-timeout timeout)
+ (let ((status :interrupted))
+ ;; Need to disable interrupts so that we don't miss grabbing the
+ ;; mutex on our way out.
+ (without-interrupts
+ (unwind-protect
+ (progn
+ #!-sb-futex
+ (progn
+ (%with-cas-lock ((waitqueue-%owner queue))
+ (%waitqueue-enqueue me queue))
+ (release-mutex mutex)
+ (setf status
+ (or (flet ((wakeup ()
+ (barrier (:read))
+ (unless (eq queue (thread-waiting-for me))
+ :ok)))
+ (declare (dynamic-extent #'wakeup))
+ (allow-with-interrupts
+ (sb!impl::%%wait-for #'wakeup stop-sec stop-usec)))
+ :timeout)))
+ #!+sb-futex
+ (with-pinned-objects (queue me)
+ (setf (waitqueue-token queue) me)
+ (release-mutex mutex)
+ ;; Now we go to sleep using futex-wait. If anyone else
+ ;; manages to grab MUTEX and call CONDITION-NOTIFY during
+ ;; this comment, it will change the token, and so futex-wait
+ ;; returns immediately instead of sleeping. Ergo, no lost
+ ;; wakeup. We may get spurious wakeups, but that's ok.
+ (setf status
+ (case (allow-with-interrupts
+ (futex-wait (waitqueue-token-address queue)
+ (get-lisp-obj-address me)
+ ;; our way of saying "no
+ ;; timeout":
+ (or to-sec -1)
+ (or to-usec 0)))
+ ((1)
+ ;; 1 = ETIMEDOUT
+ :timeout)
+ (t
+ ;; -1 = EWOULDBLOCK, possibly spurious wakeup
+ ;; 0 = normal wakeup
+ ;; 2 = EINTR, a spurious wakeup
+ :ok)))))
+ #!-sb-futex
+ (%with-cas-lock ((waitqueue-%owner queue))
+ (if (eq queue (thread-waiting-for me))
+ (%waitqueue-drop me queue)
+ (unless (eq :ok status)
+ ;; CONDITION-NOTIFY thinks we've been woken up, but really
+ ;; we're unwinding. Wake someone else up.
+ (%waitqueue-wakeup queue 1))))
+ ;; Update timeout for mutex re-aquisition.
+ (when (and (eq :ok status) to-sec)
+ (setf (values to-sec to-usec)
+ (sb!impl::relative-decoded-times stop-sec stop-usec)))
+ ;; If we ran into deadline, try to get the mutex before
+ ;; signaling. If we don't unwind it will look like a normal
+ ;; return from user perspective.
+ (when (and (eq :timeout status) deadlinep)
+ (let ((got-it (%try-mutex mutex me)))
+ (allow-with-interrupts
+ (signal-deadline)
+ (cond (got-it
+ (return-from condition-wait t))
+ (t
+ ;; The deadline may have changed.
+ (setf (values to-sec to-usec stop-sec stop-usec deadlinep)
+ (decode-timeout timeout))
+ (setf status :ok))))))
+ ;; Re-acquire the mutex for normal return.
+ (when (eq :ok status)
+ (unless (or (%try-mutex mutex me)
+ (allow-with-interrupts
+ (%wait-for-mutex mutex me timeout
+ to-sec to-usec
+ stop-sec stop-usec deadlinep)))
+ (setf status :timeout)))))
+ (or (eq :ok status)
+ (unless (eq :timeout status)
+ ;; The only case we return normally without re-acquiring the
+ ;; mutex is when there is a :TIMEOUT that runs out.
+ (bug "CONDITION-WAIT: invalid status on normal return: ~S" status)))))))
+
+(defun condition-notify (queue &optional (n 1))
+ #!+sb-doc
+ "Notify N threads waiting on QUEUE.
+
+IMPORTANT: The same mutex that is used in the corresponding CONDITION-WAIT
+must be held by this thread during this call."
+ #!-sb-thread
+ (declare (ignore queue n))
+ #!-sb-thread
+ (error "Not supported in unithread builds.")
+ #!+sb-thread
+ (declare (type (and fixnum (integer 1)) n))
+ (/show0 "Entering CONDITION-NOTIFY")
+ #!+sb-thread
+ (progn
+ #!-sb-futex
+ (with-cas-lock ((waitqueue-%owner queue))
+ (%waitqueue-wakeup queue n))
+ #!+sb-futex
+ (progn
+ ;; No problem if >1 thread notifies during the comment in condition-wait:
+ ;; as long as the value in queue-data isn't the waiting thread's id, it
+ ;; matters not what it is -- using the queue object itself is handy.
+ ;;
+ ;; XXX we should do something to ensure that the result of this setf
+ ;; is visible to all CPUs.
+ ;;
+ ;; ^-- surely futex_wake() involves a memory barrier?
+ (setf (waitqueue-token queue) queue)
+ (with-pinned-objects (queue)
+ (futex-wake (waitqueue-token-address queue) n)))))
+
+(defun condition-broadcast (queue)
+ #!+sb-doc
+ "Notify all threads waiting on QUEUE.
+
+IMPORTANT: The same mutex that is used in the corresponding CONDITION-WAIT
+must be held by this thread during this call."
+ (condition-notify queue
+ ;; On a 64-bit platform truncating M-P-F to an int
+ ;; results in -1, which wakes up only one thread.
+ (ldb (byte 29 0)
+ most-positive-fixnum)))
+\f
+
+;;;; Semaphores
+
+(defstruct (semaphore (:constructor %make-semaphore (name %count)))
+ #!+sb-doc
+ "Semaphore type. The fact that a SEMAPHORE is a STRUCTURE-OBJECT
+should be considered an implementation detail, and may change in the
+future."
+ (name nil :type (or null thread-name))
+ (%count 0 :type (integer 0))
+ (waitcount 0 :type sb!vm:word)
+ (mutex (make-mutex))
+ (queue (make-waitqueue)))
+
+(setf (fdocumentation 'semaphore-name 'function)
+ "The name of the semaphore INSTANCE. Setfable.")
+
+(defstruct (semaphore-notification (:constructor make-semaphore-notification ())
+ (:copier nil))
+ #!+sb-doc
+ "Semaphore notification object. Can be passed to WAIT-ON-SEMAPHORE and
+TRY-SEMAPHORE as the :NOTIFICATION argument. Consequences are undefined if
+multiple threads are using the same notification object in parallel."
+ (%status nil :type boolean))
+
+(setf (fdocumentation 'make-semaphore-notification 'function)
+ "Constructor for SEMAPHORE-NOTIFICATION objects. SEMAPHORE-NOTIFICATION-STATUS
+is initially NIL.")
+
+(declaim (inline semaphore-notification-status))
+(defun semaphore-notification-status (semaphore-notification)
+ #!+sb-doc
+ "Returns T if a WAIT-ON-SEMAPHORE or TRY-SEMAPHORE using
+SEMAPHORE-NOTICATION has succeeded since the notification object was created
+or cleared."
+ (barrier (:read))
+ (semaphore-notification-%status semaphore-notification))
+
+(declaim (inline clear-semaphore-notification))
+(defun clear-semaphore-notification (semaphore-notification)
+ #!+sb-doc
+ "Resets the SEMAPHORE-NOTIFICATION object for use with another call to
+WAIT-ON-SEMAPHORE or TRY-SEMAPHORE."
+ (barrier (:write)
+ (setf (semaphore-notification-%status semaphore-notification) nil)))
+
+(declaim (inline semaphore-count))
+(defun semaphore-count (instance)
+ #!+sb-doc
+ "Returns the current count of the semaphore INSTANCE."
+ (barrier (:read))
+ (semaphore-%count instance))
+
+(defun make-semaphore (&key name (count 0))
+ #!+sb-doc
+ "Create a semaphore with the supplied COUNT and NAME."
+ (%make-semaphore name count))
+
+(defun wait-on-semaphore (semaphore &key timeout notification)
+ #!+sb-doc
+ "Decrement the count of SEMAPHORE if the count would not be negative. Else
+blocks until the semaphore can be decremented. Returns T on success.
+
+If TIMEOUT is given, it is the maximum number of seconds to wait. If the count
+cannot be decremented in that time, returns NIL without decrementing the
+count.
+
+If NOTIFICATION is given, it must be a SEMAPHORE-NOTIFICATION object whose
+SEMAPHORE-NOTIFICATION-STATUS is NIL. If WAIT-ON-SEMAPHORE succeeds and
+decrements the count, the status is set to T."
+ (when (and notification (semaphore-notification-status notification))
+ (with-simple-restart (continue "Clear notification status and continue.")
+ (error "~@<Semaphore notification object status not cleared on entry to ~S on ~S.~:@>"
+ 'wait-on-semaphore semaphore))
+ (clear-semaphore-notification notification))
+ ;; A more direct implementation based directly on futexes should be
+ ;; possible.
+ ;;
+ ;; We need to disable interrupts so that we don't forget to
+ ;; decrement the waitcount (which would happen if an asynch
+ ;; interrupt should catch us on our way out from the loop.)
+ ;;
+ ;; FIXME: No timeout on initial mutex acquisition.
+ (with-system-mutex ((semaphore-mutex semaphore) :allow-with-interrupts t)
+ ;; Quick check: is it positive? If not, enter the wait loop.
+ (let ((count (semaphore-%count semaphore)))
+ (cond ((plusp count)
+ (setf (semaphore-%count semaphore) (1- count))
+ (when notification
+ (setf (semaphore-notification-%status notification) t)))
+ (t
+ (unwind-protect
+ (progn
+ ;; Need to use ATOMIC-INCF despite the lock, because on our
+ ;; way out from here we might not be locked anymore -- so
+ ;; another thread might be tweaking this in parallel using
+ ;; ATOMIC-DECF. No danger over overflow, since there it
+ ;; at most one increment per thread waiting on the semaphore.
+ (sb!ext:atomic-incf (semaphore-waitcount semaphore))
+ (loop until (plusp (setf count (semaphore-%count semaphore)))
+ do (or (condition-wait (semaphore-queue semaphore)
+ (semaphore-mutex semaphore)
+ :timeout timeout)
+ (return-from wait-on-semaphore nil)))
+ (setf (semaphore-%count semaphore) (1- count))
+ (when notification
+ (setf (semaphore-notification-%status notification) t)))
+ ;; Need to use ATOMIC-DECF as we may unwind without the lock
+ ;; being held!
+ (sb!ext:atomic-decf (semaphore-waitcount semaphore)))))))
+ t)
+
+(defun try-semaphore (semaphore &optional (n 1) notification)
+ #!+sb-doc
+ "Try to decrement the count of SEMAPHORE by N. If the count were to
+become negative, punt and return NIL, otherwise return true.
+
+If NOTIFICATION is given it must be a semaphore notification object
+with SEMAPHORE-NOTIFICATION-STATUS of NIL. If the count is decremented,
+the status is set to T."
+ (declare (type (integer 1) n))
+ (when (and notification (semaphore-notification-status notification))
+ (with-simple-restart (continue "Clear notification status and continue.")
+ (error "~@<Semaphore notification object status not cleared on entry to ~S on ~S.~:@>"
+ 'try-semaphore semaphore))
+ (clear-semaphore-notification notification))
+ (with-system-mutex ((semaphore-mutex semaphore) :allow-with-interrupts t)
+ (let ((new-count (- (semaphore-%count semaphore) n)))
+ (when (not (minusp new-count))
+ (setf (semaphore-%count semaphore) new-count)
+ (when notification
+ (setf (semaphore-notification-%status notification) t))
+ ;; FIXME: We don't actually document this -- should we just
+ ;; return T, or document new count as the return?
+ new-count))))
+
+(defun signal-semaphore (semaphore &optional (n 1))
+ #!+sb-doc
+ "Increment the count of SEMAPHORE by N. If there are threads waiting
+on this semaphore, then N of them is woken up."
+ (declare (type (integer 1) n))
+ ;; Need to disable interrupts so that we don't lose a wakeup after
+ ;; we have incremented the count.
+ (with-system-mutex ((semaphore-mutex semaphore) :allow-with-interrupts t)
+ (let ((waitcount (semaphore-waitcount semaphore))
+ (count (incf (semaphore-%count semaphore) n)))
+ (when (plusp waitcount)
+ (condition-notify (semaphore-queue semaphore) (min waitcount count))))))
+\f
+
+;;;; Job control, independent listeners
+
+(defstruct session
+ (lock (make-mutex :name "session lock"))
(threads nil)
(interactive-threads nil)
(interactive-threads-queue (make-waitqueue)))
+(defvar *session* nil)
+
+;;; The debugger itself tries to acquire the session lock, don't let
+;;; funny situations (like getting a sigint while holding the session
+;;; lock) occur. At the same time we need to allow interrupts while
+;;; *waiting* for the session lock for things like GET-FOREGROUND to
+;;; be interruptible.
+;;;
+;;; Take care: we sometimes need to obtain the session lock while
+;;; holding on to *ALL-THREADS-LOCK*, so we must _never_ obtain it
+;;; _after_ getting a session lock! (Deadlock risk.)
+;;;
+;;; FIXME: It would be good to have ordered locks to ensure invariants
+;;; like the above.
+(defmacro with-session-lock ((session) &body body)
+ `(with-system-mutex ((session-lock ,session) :allow-with-interrupts t)
+ ,@body))
+
(defun new-session ()
- (let ((tid (current-thread-id)))
- (make-session :threads (list tid)
- :interactive-threads (list tid))))
+ (make-session :threads (list *current-thread*)
+ :interactive-threads (list *current-thread*)))
(defun init-job-control ()
- (setf *session* (new-session)))
+ (/show0 "Entering INIT-JOB-CONTROL")
+ (setf *session* (new-session))
+ (/show0 "Exiting INIT-JOB-CONTROL"))
-(defun %delete-thread-from-session (tid)
- (with-mutex ((session-lock *session*))
- (setf (session-threads *session*)
- (delete tid (session-threads *session*))
- (session-interactive-threads *session*)
- (delete tid (session-interactive-threads *session*)))))
+(defun %delete-thread-from-session (thread session)
+ (with-session-lock (session)
+ (setf (session-threads session)
+ (delete thread (session-threads session))
+ (session-interactive-threads session)
+ (delete thread (session-interactive-threads session)))))
(defun call-with-new-session (fn)
- (%delete-thread-from-session (current-thread-id))
- (let ((*session* (new-session))) (funcall fn)))
+ (%delete-thread-from-session *current-thread* *session*)
+ (let ((*session* (new-session)))
+ (funcall fn)))
(defmacro with-new-session (args &body forms)
- (declare (ignore args)) ;for extensibility
+ (declare (ignore args)) ;for extensibility
(sb!int:with-unique-names (fb-name)
`(labels ((,fb-name () ,@forms))
(call-with-new-session (function ,fb-name)))))
-;;; this is called from a C signal handler: some signals may be masked
-(defun handle-thread-exit (tid)
- "Remove thread id TID from the session, if it's there"
- (%delete-thread-from-session tid))
-
+;;; Remove thread from its session, if it has one.
+#!+sb-thread
+(defun handle-thread-exit (thread)
+ (/show0 "HANDLING THREAD EXIT")
+ (when *exit-in-process*
+ (%exit))
+ ;; Lisp-side cleanup
+ (with-all-threads-lock
+ (setf (thread-%alive-p thread) nil)
+ (setf (thread-os-thread thread) nil)
+ (setq *all-threads* (delete thread *all-threads*))
+ (when *session*
+ (%delete-thread-from-session thread *session*))))
+
+(defun %exit-other-threads ()
+ ;; Grabbing this lock prevents new threads from
+ ;; being spawned, and guarantees that *ALL-THREADS*
+ ;; is up to date.
+ (with-deadline (:seconds nil :override t)
+ (grab-mutex *make-thread-lock*)
+ (let ((timeout sb!ext:*exit-timeout*)
+ (code *exit-in-process*)
+ (current *current-thread*)
+ (joinees nil)
+ (main nil))
+ (dolist (thread (list-all-threads))
+ (cond ((eq thread current))
+ ((main-thread-p thread)
+ (setf main thread))
+ (t
+ (handler-case
+ (progn
+ (terminate-thread thread)
+ (push thread joinees))
+ (interrupt-thread-error ())))))
+ (with-progressive-timeout (time-left :seconds timeout)
+ (dolist (thread joinees)
+ (join-thread thread :default t :timeout (time-left)))
+ ;; Need to defer till others have joined, because when main
+ ;; thread exits, we're gone. Can't use TERMINATE-THREAD -- would
+ ;; get the exit code wrong.
+ (when main
+ (handler-case
+ (interrupt-thread
+ main
+ (lambda ()
+ (setf *exit-in-process* (list code))
+ (throw 'sb!impl::%end-of-the-world t)))
+ (interrupt-thread-error ()))
+ ;; Normally this never finishes, as once the main-thread unwinds we
+ ;; exit with the right code, but if times out before that happens,
+ ;; we will exit after returning -- or rathe racing the main thread
+ ;; to calling OS-EXIT.
+ (join-thread main :default t :timeout (time-left)))))))
+
(defun terminate-session ()
- "Kill all threads in session exept for this one. Does nothing if current
-thread is not the foreground thread"
- (let* ((tid (current-thread-id))
- (to-kill
- (with-mutex ((session-lock *session*))
- (and (eql tid (car (session-interactive-threads *session*)))
- (session-threads *session*)))))
+ #!+sb-doc
+ "Kill all threads in session except for this one. Does nothing if current
+thread is not the foreground thread."
+ ;; FIXME: threads created in other threads may escape termination
+ (let ((to-kill
+ (with-session-lock (*session*)
+ (and (eq *current-thread*
+ (car (session-interactive-threads *session*)))
+ (session-threads *session*)))))
;; do the kill after dropping the mutex; unwind forms in dying
;; threads may want to do session things
- (dolist (p to-kill)
- (unless (eql p tid) (terminate-thread p)))))
+ (dolist (thread to-kill)
+ (unless (eq thread *current-thread*)
+ ;; terminate the thread but don't be surprised if it has
+ ;; exited in the meantime
+ (handler-case (terminate-thread thread)
+ (interrupt-thread-error ()))))))
;;; called from top of invoke-debugger
(defun debugger-wait-until-foreground-thread (stream)
"Returns T if thread had been running in background, NIL if it was
interactive."
(declare (ignore stream))
+ #!-sb-thread nil
+ #!+sb-thread
(prog1
- (with-mutex ((session-lock *session*))
- (not (member (current-thread-id)
- (session-interactive-threads *session*))))
+ (with-session-lock (*session*)
+ (not (member *current-thread*
+ (session-interactive-threads *session*))))
(get-foreground)))
-
(defun get-foreground ()
+ #!-sb-thread t
+ #!+sb-thread
(let ((was-foreground t))
(loop
- (with-mutex ((session-lock *session*))
- (let ((tid (current-thread-id))
- (int-t (session-interactive-threads *session*)))
- (when (eql (car int-t) tid)
- (unless was-foreground
- (format *query-io* "Resuming thread ~A~%" tid))
- (sb!sys:enable-interrupt sb!unix:sigint #'sb!unix::sigint-handler)
- (return-from get-foreground t))
- (setf was-foreground nil)
- (unless (member tid int-t)
- (setf (cdr (last int-t))
- (list tid)))
- (condition-wait
- (session-interactive-threads-queue *session*)
- (session-lock *session*)))))))
+ (/show0 "Looping in GET-FOREGROUND")
+ (with-session-lock (*session*)
+ (let ((int-t (session-interactive-threads *session*)))
+ (when (eq (car int-t) *current-thread*)
+ (unless was-foreground
+ (format *query-io* "Resuming thread ~A~%" *current-thread*))
+ (return-from get-foreground t))
+ (setf was-foreground nil)
+ (unless (member *current-thread* int-t)
+ (setf (cdr (last int-t))
+ (list *current-thread*)))
+ (condition-wait
+ (session-interactive-threads-queue *session*)
+ (session-lock *session*)))))))
(defun release-foreground (&optional next)
- "Background this thread. If NEXT is supplied, arrange for it to have the foreground next"
- (with-mutex ((session-lock *session*))
- (let ((tid (current-thread-id)))
+ #!+sb-doc
+ "Background this thread. If NEXT is supplied, arrange for it to
+have the foreground next."
+ #!-sb-thread (declare (ignore next))
+ #!-sb-thread nil
+ #!+sb-thread
+ (with-session-lock (*session*)
+ (when (rest (session-interactive-threads *session*))
+ (setf (session-interactive-threads *session*)
+ (delete *current-thread* (session-interactive-threads *session*))))
+ (when next
(setf (session-interactive-threads *session*)
- (delete tid (session-interactive-threads *session*)))
- (sb!sys:enable-interrupt sb!unix:sigint :ignore)
- (when next
- (setf (session-interactive-threads *session*)
- (list* next
- (delete next (session-interactive-threads *session*)))))
- (condition-broadcast (session-interactive-threads-queue *session*)))))
-
-(defun make-listener-thread (tty-name)
+ (list* next
+ (delete next (session-interactive-threads *session*)))))
+ (condition-broadcast (session-interactive-threads-queue *session*))))
+
+(defun foreground-thread ()
+ (car (session-interactive-threads *session*)))
+
+(defun make-listener-thread (tty-name)
(assert (probe-file tty-name))
(let* ((in (sb!unix:unix-open (namestring tty-name) sb!unix:o_rdwr #o666))
- (out (sb!unix:unix-dup in))
- (err (sb!unix:unix-dup in)))
- (labels ((thread-repl ()
- (sb!unix::unix-setsid)
- (let* ((sb!impl::*stdin*
- (sb!sys:make-fd-stream in :input t :buffering :line))
- (sb!impl::*stdout*
- (sb!sys:make-fd-stream out :output t :buffering :line))
- (sb!impl::*stderr*
- (sb!sys:make-fd-stream err :output t :buffering :line))
- (sb!impl::*tty*
- (sb!sys:make-fd-stream err :input t :output t :buffering :line))
- (sb!impl::*descriptor-handlers* nil))
- (with-new-session ()
- (sb!sys:enable-interrupt sb!unix:sigint #'sb!unix::sigint-handler)
- (unwind-protect
- (sb!impl::toplevel-repl nil)
- (sb!int:flush-standard-output-streams))))))
+ (out (sb!unix:unix-dup in))
+ (err (sb!unix:unix-dup in)))
+ (labels ((thread-repl ()
+ (sb!unix::unix-setsid)
+ (let* ((sb!impl::*stdin*
+ (make-fd-stream in :input t :buffering :line
+ :dual-channel-p t))
+ (sb!impl::*stdout*
+ (make-fd-stream out :output t :buffering :line
+ :dual-channel-p t))
+ (sb!impl::*stderr*
+ (make-fd-stream err :output t :buffering :line
+ :dual-channel-p t))
+ (sb!impl::*tty*
+ (make-fd-stream err :input t :output t
+ :buffering :line
+ :dual-channel-p t))
+ (sb!impl::*descriptor-handlers* nil))
+ (with-new-session ()
+ (unwind-protect
+ (sb!impl::toplevel-repl nil)
+ (sb!int:flush-standard-output-streams))))))
(make-thread #'thread-repl))))
+\f
+
+;;;; The beef
+
+(defun make-thread (function &key name arguments ephemeral)
+ #!+sb-doc
+ "Create a new thread of NAME that runs FUNCTION with the argument
+list designator provided (defaults to no argument). Thread exits when
+the function returns. The return values of FUNCTION are kept around
+and can be retrieved by JOIN-THREAD.
+
+Invoking the initial ABORT restart estabilished by MAKE-THREAD
+terminates the thread.
+
+See also: RETURN-FROM-THREAD, ABORT-THREAD."
+ #!-sb-thread (declare (ignore function name arguments ephemeral))
+ #!-sb-thread (error "Not supported in unithread builds.")
+ #!+sb-thread (assert (or (atom arguments)
+ (null (cdr (last arguments))))
+ (arguments)
+ "Argument passed to ~S, ~S, is an improper list."
+ 'make-thread arguments)
+ #!+sb-thread
+ (let ((thread (%make-thread :name name :%ephemeral-p ephemeral)))
+ (with-mutex (*make-thread-lock*)
+ (let* ((setup-sem (make-semaphore :name "Thread setup semaphore"))
+ (real-function (coerce function 'function))
+ (arguments (if (listp arguments)
+ arguments
+ (list arguments)))
+ (initial-function
+ (named-lambda initial-thread-function ()
+ ;; In time we'll move some of the binding presently done in C
+ ;; here too.
+ ;;
+ ;; KLUDGE: Here we have a magic list of variables that are
+ ;; not thread-safe for one reason or another. As people
+ ;; report problems with the thread safety of certain
+ ;; variables, (e.g. "*print-case* in multiple threads
+ ;; broken", sbcl-devel 2006-07-14), we add a few more
+ ;; bindings here. The Right Thing is probably some variant
+ ;; of Allegro's *cl-default-special-bindings*, as that is at
+ ;; least accessible to users to secure their own libraries.
+ ;; --njf, 2006-07-15
+ ;;
+ ;; As it is, this lambda must not cons until we are ready
+ ;; to run GC. Be very careful.
+ (let* ((*current-thread* thread)
+ (*restart-clusters* nil)
+ (*handler-clusters* (sb!kernel::initial-handler-clusters))
+ (*condition-restarts* nil)
+ (*exit-in-process* nil)
+ (sb!impl::*deadline* nil)
+ (sb!impl::*deadline-seconds* nil)
+ (sb!impl::*step-out* nil)
+ ;; internal printer variables
+ (sb!impl::*previous-case* nil)
+ (sb!impl::*previous-readtable-case* nil)
+ (sb!impl::*internal-symbol-output-fun* nil)
+ (sb!impl::*descriptor-handlers* nil)) ; serve-event
+ ;; Binding from C
+ (setf sb!vm:*alloc-signal* *default-alloc-signal*)
+ (setf (thread-os-thread thread) (current-thread-os-thread))
+ (with-mutex ((thread-result-lock thread))
+ (with-all-threads-lock
+ (push thread *all-threads*))
+ (with-session-lock (*session*)
+ (push thread (session-threads *session*)))
+ (setf (thread-%alive-p thread) t)
+ (signal-semaphore setup-sem)
+ ;; Using handling-end-of-the-world would be a bit tricky
+ ;; due to other catches and interrupts, so we essentially
+ ;; re-implement it here. Once and only once more.
+ (catch 'sb!impl::toplevel-catcher
+ (catch 'sb!impl::%end-of-the-world
+ (catch '%abort-thread
+ (with-simple-restart
+ (abort "~@<Abort thread (~A)~@:>" *current-thread*)
+ (without-interrupts
+ (unwind-protect
+ (with-local-interrupts
+ (sb!unix::unblock-deferrable-signals)
+ (setf (thread-result thread)
+ (prog1
+ (cons t
+ (multiple-value-list
+ (unwind-protect
+ (catch '%return-from-thread
+ (apply real-function arguments))
+ (when *exit-in-process*
+ (sb!impl::call-exit-hooks)))))
+ #!+sb-safepoint
+ (sb!kernel::gc-safepoint))))
+ ;; We're going down, can't handle interrupts
+ ;; sanely anymore. GC remains enabled.
+ (block-deferrable-signals)
+ ;; We don't want to run interrupts in a dead
+ ;; thread when we leave WITHOUT-INTERRUPTS.
+ ;; This potentially causes important
+ ;; interupts to be lost: SIGINT comes to
+ ;; mind.
+ (setq *interrupt-pending* nil)
+ #!+sb-thruption
+ (setq *thruption-pending* nil)
+ (handle-thread-exit thread)))))))))
+ (values))))
+ ;; If the starting thread is stopped for gc before it signals the
+ ;; semaphore then we'd be stuck.
+ (assert (not *gc-inhibit*))
+ ;; Keep INITIAL-FUNCTION pinned until the child thread is
+ ;; initialized properly. Wrap the whole thing in
+ ;; WITHOUT-INTERRUPTS because we pass INITIAL-FUNCTION to another
+ ;; thread.
+ (without-interrupts
+ (with-pinned-objects (initial-function)
+ (if (zerop
+ (%create-thread (get-lisp-obj-address initial-function)))
+ (setf thread nil)
+ (wait-on-semaphore setup-sem))))))
+ (or thread (error "Could not create a new thread."))))
+
+(defun join-thread (thread &key (default nil defaultp) timeout)
+ #!+sb-doc
+ "Suspend current thread until THREAD exits. Return the result values
+of the thread function.
+
+If the thread does not exit normally within TIMEOUT seconds return
+DEFAULT if given, or else signal JOIN-THREAD-ERROR.
+
+Trying to join the main thread will cause JOIN-THREAD to block until
+TIMEOUT occurs or the process exits: when main thread exits, the
+entire process exits.
+
+NOTE: Return convention in case of a timeout is exprimental and
+subject to change."
+ (let ((lock (thread-result-lock thread))
+ (got-it nil)
+ (problem :timeout))
+ (without-interrupts
+ (unwind-protect
+ (if (setf got-it
+ (allow-with-interrupts
+ ;; Don't use the timeout if the thread is not alive anymore.
+ (grab-mutex lock :timeout (and (thread-alive-p thread) timeout))))
+ (cond ((car (thread-result thread))
+ (return-from join-thread
+ (values-list (cdr (thread-result thread)))))
+ (defaultp
+ (return-from join-thread default))
+ (t
+ (setf problem :abort)))
+ (when defaultp
+ (return-from join-thread default)))
+ (when got-it
+ (release-mutex lock))))
+ (error 'join-thread-error :thread thread :problem problem)))
+
+(defun destroy-thread (thread)
+ #!+sb-doc
+ "Deprecated. Same as TERMINATE-THREAD."
+ (terminate-thread thread))
+
+(defmacro with-interruptions-lock ((thread) &body body)
+ `(with-system-mutex ((thread-interruptions-lock ,thread))
+ ,@body))
+
+;;; Called from the signal handler.
+#!-(or sb-thruption win32)
+(defun run-interruption ()
+ (let ((interruption (with-interruptions-lock (*current-thread*)
+ (pop (thread-interruptions *current-thread*)))))
+ ;; If there is more to do, then resignal and let the normal
+ ;; interrupt deferral mechanism take care of the rest. From the
+ ;; OS's point of view the signal we are in the handler for is no
+ ;; longer pending, so the signal will not be lost.
+ (when (thread-interruptions *current-thread*)
+ (kill-safely (thread-os-thread *current-thread*) sb!unix:sigpipe))
+ (when interruption
+ (funcall interruption))))
+
+#!+sb-thruption
+(defun run-interruption ()
+ (in-interruption () ;the non-thruption code does this in the signal handler
+ (let ((interruption (with-interruptions-lock (*current-thread*)
+ (pop (thread-interruptions *current-thread*)))))
+ (when interruption
+ (funcall interruption)
+ ;; I tried implementing this function as an explicit LOOP, because
+ ;; if we are currently processing the thruption queue, why not do
+ ;; all of them in one go instead of one-by-one?
+ ;;
+ ;; I still think LOOPing would be basically the right thing
+ ;; here. But suppose some interruption unblocked deferrables.
+ ;; Will the next one be happy with that? The answer is "no", at
+ ;; least in the sense that there are tests which check that
+ ;; deferrables are blocked at the beginning of a thruption, and
+ ;; races that make those tests fail. Whether the tests are
+ ;; misguided or not, it seems easier/cleaner to loop implicitly
+ ;; -- and it's also what AK had implemented in the first place.
+ ;;
+ ;; The implicit loop is achieved by returning to C, but having C
+ ;; call back to us immediately. The runtime will reset the sigmask
+ ;; in the mean time.
+ ;; -- DFL
+ (setf *thruption-pending* t)))))
+
+(defun interrupt-thread (thread function)
+ #!+sb-doc
+ "Interrupt THREAD and make it run FUNCTION.
+
+The interrupt is asynchronous, and can occur anywhere with the exception of
+sections protected using SB-SYS:WITHOUT-INTERRUPTS.
+
+FUNCTION is called with interrupts disabled, under
+SB-SYS:ALLOW-WITH-INTERRUPTS. Since functions such as GRAB-MUTEX may try to
+enable interrupts internally, in most cases FUNCTION should either enter
+SB-SYS:WITH-INTERRUPTS to allow nested interrupts, or
+SB-SYS:WITHOUT-INTERRUPTS to prevent them completely.
+
+When a thread receives multiple interrupts, they are executed in the order
+they were sent -- first in, first out.
+
+This means that a great degree of care is required to use INTERRUPT-THREAD
+safely and sanely in a production environment. The general recommendation is
+to limit uses of INTERRUPT-THREAD for interactive debugging, banning it
+entirely from production environments -- it is simply exceedingly hard to use
+correctly.
+
+With those caveats in mind, what you need to know when using it:
+
+ * If calling FUNCTION causes a non-local transfer of control (ie. an
+ unwind), all normal cleanup forms will be executed.
+
+ However, if the interrupt occurs during cleanup forms of an UNWIND-PROTECT,
+ it is just as if that had happened due to a regular GO, THROW, or
+ RETURN-FROM: the interrupted cleanup form and those following it in the
+ same UNWIND-PROTECT do not get executed.
+
+ SBCL tries to keep its own internals asynch-unwind-safe, but this is
+ frankly an unreasonable expectation for third party libraries, especially
+ given that asynch-unwind-safety does not compose: a function calling
+ only asynch-unwind-safe function isn't automatically asynch-unwind-safe.
+
+ This means that in order for an asych unwind to be safe, the entire
+ callstack at the point of interruption needs to be asynch-unwind-safe.
+
+ * In addition to asynch-unwind-safety you must consider the issue of
+ re-entrancy. INTERRUPT-THREAD can cause function that are never normally
+ called recursively to be re-entered during their dynamic contour,
+ which may cause them to misbehave. (Consider binding of special variables,
+ values of global variables, etc.)
+
+Take togather, these two restrict the \"safe\" things to do using
+INTERRUPT-THREAD to a fairly minimal set. One useful one -- exclusively for
+interactive development use is using it to force entry to debugger to inspect
+the state of a thread:
+
+ (interrupt-thread thread #'break)
+
+Short version: be careful out there."
+ #!+(and (not sb-thread) win32)
+ #!+(and (not sb-thread) win32)
+ (declare (ignore thread))
+ (with-interrupt-bindings
+ (with-interrupts (funcall function)))
+ #!-(and (not sb-thread) win32)
+ (let ((os-thread (thread-os-thread thread)))
+ (cond ((not os-thread)
+ (error 'interrupt-thread-error :thread thread))
+ (t
+ (with-interruptions-lock (thread)
+ ;; Append to the end of the interruptions queue. It's
+ ;; O(N), but it does not hurt to slow interruptors down a
+ ;; bit when the queue gets long.
+ (setf (thread-interruptions thread)
+ (append (thread-interruptions thread)
+ (list (lambda ()
+ (without-interrupts
+ (allow-with-interrupts
+ (funcall function))))))))
+ (when (minusp (wake-thread os-thread))
+ (error 'interrupt-thread-error :thread thread))))))
+
+(defun terminate-thread (thread)
+ #!+sb-doc
+ "Terminate the thread identified by THREAD, by interrupting it and
+causing it to call SB-EXT:ABORT-THREAD with :ALLOW-EXIT T.
+
+The unwind caused by TERMINATE-THREAD is asynchronous, meaning that
+eg. thread executing
+
+ (let (foo)
+ (unwind-protect
+ (progn
+ (setf foo (get-foo))
+ (work-on-foo foo))
+ (when foo
+ ;; An interrupt occurring inside the cleanup clause
+ ;; will cause cleanups from the current UNWIND-PROTECT
+ ;; to be dropped.
+ (release-foo foo))))
+
+might miss calling RELEASE-FOO despite GET-FOO having returned true if
+the interrupt occurs inside the cleanup clause, eg. during execution
+of RELEASE-FOO.
+
+Thus, in order to write an asynch unwind safe UNWIND-PROTECT you need
+to use WITHOUT-INTERRUPTS:
+
+ (let (foo)
+ (sb-sys:without-interrupts
+ (unwind-protect
+ (progn
+ (setf foo (sb-sys:allow-with-interrupts
+ (get-foo)))
+ (sb-sys:with-local-interrupts
+ (work-on-foo foo)))
+ (when foo
+ (release-foo foo)))))
+
+Since most libraries using UNWIND-PROTECT do not do this, you should never
+assume that unknown code can safely be terminated using TERMINATE-THREAD."
+ (interrupt-thread thread (lambda () (abort-thread :allow-exit t))))
+
+(define-alien-routine "thread_yield" int)
+
+#!+sb-doc
+(setf (fdocumentation 'thread-yield 'function)
+ "Yield the processor to other threads.")
+
+;;; internal use only. If you think you need to use these, either you
+;;; are an SBCL developer, are doing something that you should discuss
+;;; with an SBCL developer first, or are doing something that you
+;;; should probably discuss with a professional psychiatrist first
+#!+sb-thread
+(progn
+ (defun %thread-sap (thread)
+ (let ((thread-sap (alien-sap (extern-alien "all_threads" (* t))))
+ (target (thread-os-thread thread)))
+ (loop
+ (when (sap= thread-sap (int-sap 0)) (return nil))
+ (let ((os-thread (sap-ref-word thread-sap
+ (* sb!vm:n-word-bytes
+ sb!vm::thread-os-thread-slot))))
+ (when (= os-thread target) (return thread-sap))
+ (setf thread-sap
+ (sap-ref-sap thread-sap (* sb!vm:n-word-bytes
+ sb!vm::thread-next-slot)))))))
+
+ (defun %symbol-value-in-thread (symbol thread)
+ ;; Prevent the thread from dying completely while we look for the TLS
+ ;; area...
+ (with-all-threads-lock
+ (if (thread-alive-p thread)
+ (let* ((offset (sb!kernel:get-lisp-obj-address
+ (sb!vm::symbol-tls-index symbol)))
+ (obj (sap-ref-lispobj (%thread-sap thread) offset))
+ (tl-val (sb!kernel:get-lisp-obj-address obj)))
+ (cond ((zerop offset)
+ (values nil :no-tls-value))
+ ((or (eql tl-val sb!vm:no-tls-value-marker-widetag)
+ (eql tl-val sb!vm:unbound-marker-widetag))
+ (values nil :unbound-in-thread))
+ (t
+ (values obj :ok))))
+ (values nil :thread-dead))))
+
+ (defun %set-symbol-value-in-thread (symbol thread value)
+ (with-pinned-objects (value)
+ ;; Prevent the thread from dying completely while we look for the TLS
+ ;; area...
+ (with-all-threads-lock
+ (if (thread-alive-p thread)
+ (let ((offset (sb!kernel:get-lisp-obj-address
+ (sb!vm::symbol-tls-index symbol))))
+ (cond ((zerop offset)
+ (values nil :no-tls-value))
+ (t
+ (setf (sap-ref-lispobj (%thread-sap thread) offset)
+ value)
+ (values value :ok))))
+ (values nil :thread-dead)))))
+
+ (define-alien-variable tls-index-start unsigned-int)
+
+ ;; Get values from the TLS area of the current thread.
+ (defun %thread-local-references ()
+ (without-gcing
+ (let ((sap (%thread-sap *current-thread*)))
+ (loop for index from tls-index-start
+ below (symbol-value 'sb!vm::*free-tls-index*)
+ for value = (sap-ref-word sap (* sb!vm:n-word-bytes index))
+ for (obj ok) = (multiple-value-list (sb!kernel:make-lisp-obj value nil))
+ unless (or (not ok)
+ (typep obj '(or fixnum character))
+ (member value
+ '(#.sb!vm:no-tls-value-marker-widetag
+ #.sb!vm:unbound-marker-widetag))
+ (member obj seen :test #'eq))
+ collect obj into seen
+ finally (return seen))))))
+
+(defun symbol-value-in-thread (symbol thread &optional (errorp t))
+ "Return the local value of SYMBOL in THREAD, and a secondary value of T
+on success.
+
+If the value cannot be retrieved (because the thread has exited or because it
+has no local binding for NAME) and ERRORP is true signals an error of type
+SYMBOL-VALUE-IN-THREAD-ERROR; if ERRORP is false returns a primary value of
+NIL, and a secondary value of NIL.
+
+Can also be used with SETF to change the thread-local value of SYMBOL.
+
+SYMBOL-VALUE-IN-THREAD is primarily intended as a debugging tool, and not as a
+mechanism for inter-thread communication."
+ (declare (symbol symbol) (thread thread))
+ #!+sb-thread
+ (multiple-value-bind (res status) (%symbol-value-in-thread symbol thread)
+ (if (eq :ok status)
+ (values res t)
+ (if errorp
+ (error 'symbol-value-in-thread-error
+ :name symbol
+ :thread thread
+ :info (list :read status))
+ (values nil nil))))
+ #!-sb-thread
+ (if (boundp symbol)
+ (values (symbol-value symbol) t)
+ (if errorp
+ (error 'symbol-value-in-thread-error
+ :name symbol
+ :thread thread
+ :info (list :read :unbound-in-thread))
+ (values nil nil))))
+
+(defun (setf symbol-value-in-thread) (value symbol thread &optional (errorp t))
+ (declare (symbol symbol) (thread thread))
+ #!+sb-thread
+ (multiple-value-bind (res status) (%set-symbol-value-in-thread symbol thread value)
+ (if (eq :ok status)
+ (values res t)
+ (if errorp
+ (error 'symbol-value-in-thread-error
+ :name symbol
+ :thread thread
+ :info (list :write status))
+ (values nil nil))))
+ #!-sb-thread
+ (if (boundp symbol)
+ (values (setf (symbol-value symbol) value) t)
+ (if errorp
+ (error 'symbol-value-in-thread-error
+ :name symbol
+ :thread thread
+ :info (list :write :unbound-in-thread))
+ (values nil nil))))
+
+(defun sb!vm::locked-symbol-global-value-add (symbol-name delta)
+ (sb!vm::locked-symbol-global-value-add symbol-name delta))
+\f
+
+;;;; Stepping
+
+(defun thread-stepping ()
+ (make-lisp-obj
+ (sap-ref-word (current-thread-sap)
+ (* sb!vm::thread-stepping-slot sb!vm:n-word-bytes))))
+
+(defun (setf thread-stepping) (value)
+ (setf (sap-ref-word (current-thread-sap)
+ (* sb!vm::thread-stepping-slot sb!vm:n-word-bytes))
+ (get-lisp-obj-address value)))