;;;; provided with absolutely no warranty. See the COPYING and CREDITS
;;;; files for more information.
-;;; GC tuning has little effect on the x86 due to the generational
-;;; collector. For the older stop & copy collector, it assuredly
-;;; does. GC time is proportional to the amount of non-garbage
-;;; needing collection and copying; when the application involved is
-;;; the SBCL compiler, it doesn't take any longer to collect 20 Mb than
-;;; to collect 2 Mb. -dan, 20000819
-;;;
-;;; Actually, tweaking *BYTES-CONSED-BETWEEN-GCS* to 20Mb instead of
-;;; the default 2 seemed to make SBCL rebuild O(25%) faster on my 256
-;;; Mb K6/3, so I think it does have some effect on X86/GENCGC. I
-;;; haven't looked into why this would be, though. Also, I'm afraid
-;;; that using 20Mb here might be unfriendly to people using more-reasonable
-;;; machines (like old laptops with 48Mb of memory..) so I've
-;;; suppressed this tweak except for Alpha. -- WHN 2001-05-11
-#+(and sbcl alpha) ; SBCL/Alpha uses stop-and-copy, and Alphas have lotso RAM.
-(progn
- (sb-ext:gc-off)
- (setf (sb-ext:bytes-consed-between-gcs) (* 20 (expt 10 6)))
- (sb-ext:gc-on)
- (sb-ext:gc))
-
-;;; FIXME: I'm now inclined to make all the bootstrap stuff run in CL-USER
-;;; instead of SB-COLD. If I do so, I should first take care to
-;;; UNINTERN any old stuff in CL-USER, since ANSI says (11.1.2.2, "The
-;;; COMMON-LISP-USER Package") that CL-USER can have arbitrary symbols in
-;;; it. (And of course I should set the USE list to only CL.)
+;;; SB-COLD holds stuff used to build the initial SBCL core file
+;;; (including not only the final construction of the core file, but
+;;; also the preliminary steps like e.g. building the cross-compiler
+;;; and running the cross-compiler to produce target FASL files).
(defpackage "SB-COLD" (:use "CL"))
+
(in-package "SB-COLD")
;;; prefixes for filename stems when cross-compiling. These are quite arbitrary
;;; "host-objects/" or absolute pathnames (e.g. "/tmp/sbcl-xc-host-objects/").
;;;
;;; The cross-compilation process will force the creation of these directories
-;;; by executing CL:ENSURE-DIRECTORIES-EXIST (on the host Common Lisp).
+;;; by executing CL:ENSURE-DIRECTORIES-EXIST (on the xc host Common Lisp).
(defvar *host-obj-prefix*)
(defvar *target-obj-prefix*)
-;;; suffixes for filename stems when cross-compiling. Everything
-;;; should work fine for any arbitrary string values here. With more
-;;; work maybe we could cause these automatically to become the
-;;; traditional extensions for whatever host and target architectures
-;;; (e.g. ".x86f" or ".axpf") we're currently doing. That would make
-;;; it easier for a human looking at the temporary files to figure out
-;;; what they're for, but it's not necessary for the compilation
-;;; process to work, so we haven't bothered.
-(defvar *host-obj-suffix* ".lisp-obj")
-(defvar *target-obj-suffix* ".lisp-obj")
+;;; suffixes for filename stems when cross-compiling
+(defvar *host-obj-suffix*
+ (or
+ ;; On some xc hosts, it's impossible to LOAD a fasl file unless it
+ ;; has the same extension that the host uses for COMPILE-FILE
+ ;; output, so we have to be careful to use the xc host's preferred
+ ;; extension.
+ ;;
+ ;; FIXME: This is a little ugly and annoying to maintain. And
+ ;; there's very likely some way to rearrange the build process so
+ ;; that we never explicitly refer to host object file suffixes,
+ ;; only to the result of CL:COMPILE-FILE-PATHNAME.
+ #+lispworks ".ufsl" ; as per Lieven Marchand sbcl-devel 2002-02-01
+ #+openmcl ".pfsl"
+ ;; On most xc hosts, any old extension works, so we use an
+ ;; arbitrary one.
+ ".lisp-obj"))
+(defvar *target-obj-suffix*
+ ;; Target fasl files are LOADed (actually only quasi-LOADed, in
+ ;; GENESIS) only by SBCL code, and it doesn't care about particular
+ ;; extensions, so we can use something arbitrary.
+ ".lisp-obj")
;;; a function of one functional argument, which calls its functional argument
;;; in an environment suitable for compiling the target. (This environment
;;; includes e.g. a suitable *FEATURES* value.)
+(declaim (type function *in-target-compilation-mode-fn*))
(defvar *in-target-compilation-mode-fn*)
-;;; designator for a function with the same calling convention as
-;;; CL:COMPILE-FILE, to be used to translate ordinary Lisp source files into
-;;; target object files
+;;; a function with the same calling convention as CL:COMPILE-FILE, to be
+;;; used to translate ordinary Lisp source files into target object files
+(declaim (type function *target-compile-file*))
(defvar *target-compile-file*)
;;; designator for a function with the same calling convention as
;;; COMPILE-STEM function above. -- WHN 19990321
(defun rename-file-a-la-unix (x y)
- ;; CLISP signals an error when the target file exists, which
- ;; seems unjustified by the ANSI definition of RENAME-FILE.
- ;; Work around it.
- #+clisp (ignore-errors (delete-file y))
-
- (rename-file x
- ;; (Note that the TRUENAME expression here is lifted
- ;; from an example in the ANSI spec for TRUENAME.)
- (with-open-file (stream y :direction :output)
- (close stream)
- ;; From the ANSI spec: "In this case, the file is
- ;; closed when the truename is tried, so the truename
- ;; information is reliable."
- (truename stream))))
+ (let ((path ;; (Note that the TRUENAME expression here is lifted from an
+ ;; example in the ANSI spec for TRUENAME.)
+ (with-open-file (stream y :direction :output)
+ (close stream)
+ ;; From the ANSI spec: "In this case, the file is closed
+ ;; when the truename is tried, so the truename
+ ;; information is reliable."
+ (truename stream))))
+ (delete-file path)
+ (rename-file x path)))
(compile 'rename-file-a-la-unix)
;;; a wrapper for compilation/assembly, used mostly to centralize
(compile-file #'compile-file)
ignore-failure-p)
+ (declare (type function compile-file))
+
(let* (;; KLUDGE: Note that this CONCATENATE 'STRING stuff is not The Common
;; Lisp Way, although it works just fine for common UNIX environments.
;; Should it come to pass that the system is ported to environments
(when (probe-file obj)
(delete-file obj))
- ;; Work around a bug in CLISP 1999-01-08 #'COMPILE-FILE: CLISP
- ;; mangles relative pathnames passed as :OUTPUT-FILE arguments,
- ;; but works OK with absolute pathnames.
- #+clisp
+ ;; Original comment:
+ ;;
+ ;; Work around a bug in CLISP 1999-01-08 #'COMPILE-FILE: CLISP
+ ;; mangles relative pathnames passed as :OUTPUT-FILE arguments,
+ ;; but works OK with absolute pathnames.
+ ;;
+ ;; following discussion on cmucl-imp 2002-07
+ ;; "COMPILE-FILE-PATHNAME", it would seem safer to deal with
+ ;; absolute pathnames all the time; it is no longer clear that the
+ ;; original behaviour in CLISP was wrong or that the current
+ ;; behaviour is right; and in any case absolutifying the pathname
+ ;; insulates us against changes of behaviour. -- CSR, 2002-08-09
(setf tmp-obj
;; (Note that this idiom is taken from the ANSI
;; documentation for TRUENAME.)
(with-open-file (stream tmp-obj :direction :output)
(close stream)
(truename stream)))
+ ;; and some compilers (e.g. OpenMCL) will complain if they're
+ ;; asked to write over a file that exists already (and isn't
+ ;; recognizeably a fasl file), so
+ (when (probe-file tmp-obj)
+ (delete-file tmp-obj))
;; Try to use the compiler to generate a new temporary object file.
- (multiple-value-bind (output-truename warnings-p failure-p)
- (funcall compile-file src :output-file tmp-obj)
- (declare (ignore warnings-p))
- (cond ((not output-truename)
- (error "couldn't compile ~S" src))
- (failure-p
- (if ignore-failure-p
- (warn "ignoring FAILURE-P return value from compilation of ~S"
- src)
- (unwind-protect
- (progn
- ;; FIXME: This should have another option,
- ;; redoing compilation.
- (cerror "Continue, using possibly-bogus ~S."
- "FAILURE-P was set when creating ~S."
- obj)
- (setf failure-p nil))
- ;; Don't leave failed object files lying around.
- (when (and failure-p (probe-file tmp-obj))
- (delete-file tmp-obj)
- (format t "~&deleted ~S~%" tmp-obj)))))
- ;; Otherwise: success, just fall through.
- (t nil)))
+ (flet ((report-recompile-restart (stream)
+ (format stream "Recompile file ~S" src))
+ (report-continue-restart (stream)
+ (format stream "Continue, using possibly bogus file ~S" obj)))
+ (tagbody
+ retry-compile-file
+ (multiple-value-bind (output-truename warnings-p failure-p)
+ (funcall compile-file src :output-file tmp-obj)
+ (declare (ignore warnings-p))
+ (cond ((not output-truename)
+ (error "couldn't compile ~S" src))
+ (failure-p
+ (if ignore-failure-p
+ (warn "ignoring FAILURE-P return value from compilation of ~S"
+ src)
+ (unwind-protect
+ (restart-case
+ (error "FAILURE-P was set when creating ~S."
+ obj)
+ (recompile ()
+ :report report-recompile-restart
+ (go retry-compile-file))
+ (continue ()
+ :report report-continue-restart
+ (setf failure-p nil)))
+ ;; Don't leave failed object files lying around.
+ (when (and failure-p (probe-file tmp-obj))
+ (delete-file tmp-obj)
+ (format t "~&deleted ~S~%" tmp-obj)))))
+ ;; Otherwise: success, just fall through.
+ (t nil)))))
;; If we get to here, compilation succeeded, so it's OK to rename
;; the temporary output file to the permanent object file.
(format t
"target features *SHEBANG-FEATURES*=~@<~S~:>~%"
*shebang-features*))
+
+(defvar *shebang-backend-subfeatures*
+ (let* ((default-subfeatures nil)
+ (customizer-file-name "customize-backend-subfeatures.lisp")
+ (customizer (if (probe-file customizer-file-name)
+ (compile nil
+ (read-from-file customizer-file-name))
+ #'identity)))
+ (funcall customizer default-subfeatures)))
+(let ((*print-length* nil)
+ (*print-level* nil))
+ (format t
+ "target backend-subfeatures *SHEBANG-BACKEND-FEATURES*=~@<~S~:>~%"
+ *shebang-backend-subfeatures*))
\f
;;;; cold-init-related PACKAGE and SYMBOL tools
;;; values of special variables such as *** and +, anyway). Set up
;;; machinery to warn us when/if we change it.
;;;
-;;; FIXME: All this machinery should probably be conditional on
-;;; #!+SB-SHOW, i.e. we should be able to wrap #!+SB-SHOW around both
-;;; the LOAD and the DEFVAR here.
-(load "src/cold/snapshot.lisp")
-(defvar *cl-snapshot* (take-snapshot "COMMON-LISP"))
+;;; All code depending on this is itself dependent on #!+SB-SHOW.
+#!+sb-show
+(progn
+ (load "src/cold/snapshot.lisp")
+ (defvar *cl-snapshot* (take-snapshot "COMMON-LISP")))
\f
;;;; master list of source files and their properties
(defparameter
*expected-stem-flags*
'(;; meaning: This file is not to be compiled when building the
- ;; cross-compiler which runs on the host ANSI Lisp.
+ ;; cross-compiler which runs on the host ANSI Lisp. ("not host
+ ;; code", i.e. does not execute on host -- but may still be
+ ;; cross-compiled by the host, so that it executes on the target)
:not-host
;; meaning: This file is not to be compiled as part of the target
- ;; SBCL.
+ ;; SBCL. ("not target code" -- but still presumably host code,
+ ;; used to support the cross-compilation process)
:not-target
;; meaning: This file is to be processed with the SBCL assembler,
;; not COMPILE-FILE. (Note that this doesn't make sense unless
;;; Execute function FN in an environment appropriate for compiling the
;;; cross-compiler's source code in the cross-compilation host.
(defun in-host-compilation-mode (fn)
+ (declare (type function fn))
(let ((*features* (cons :sb-xc-host *features*))
;; the CROSS-FLOAT-INFINITY-KLUDGE, as documented in
;; base-target-features.lisp-expr: