(in-package "SB!C")
-(file-comment
- "$Header$")
+;;; The front-end data structure (IR1) is composed of nodes,
+;;; representing actual evaluations. Linear sequences of nodes in
+;;; control-flow order are combined into blocks (but see
+;;; JOIN-SUCCESSOR-IF-POSSIBLE for precise conditions); control
+;;; transfers inside a block are represented with CTRANs and between
+;;; blocks -- with BLOCK-SUCC/BLOCK-PRED lists; data transfers are
+;;; represented with LVARs.
-;;; The front-end data structure (IR1) is composed of nodes and
-;;; continuations. The general idea is that continuations contain
-;;; top-down information and nodes contain bottom-up, derived
-;;; information. A continuation represents a place in the code, while
-;;; a node represents code that does something.
-;;;
-;;; This representation is more of a flow-graph than an augmented
-;;; syntax tree. The evaluation order is explicitly represented in the
-;;; linkage by continuations, rather than being implicit in the nodes
-;;; which receive the the results of evaluation. This allows us to
-;;; decouple the flow of results from the flow of control. A
-;;; continuation represents both, but the continuation can represent
-;;; the case of a discarded result by having no DEST.
-
-(def!struct (continuation
+;;; "Lead-in" Control TRANsfer [to some node]
+(def!struct (ctran
(:make-load-form-fun ignore-it)
- (:constructor make-continuation (&optional dest)))
- ;; An indication of the way that this continuation is currently used:
+ (:constructor make-ctran))
+ ;; an indication of the way that this continuation is currently used
;;
;; :UNUSED
- ;; A continuation for which all control-related slots have the default
- ;; values. A continuation is unused during IR1 conversion until it is
- ;; assigned a block, and may be also be temporarily unused during
- ;; later manipulations of IR1. In a consistent state there should
- ;; never be any mention of :UNUSED continuations. Next can have a
- ;; non-null value if the next node has already been determined.
- ;;
- ;; :DELETED
- ;; A continuation that has been deleted from IR1. Any pointers into
- ;; IR1 are cleared. There are two conditions under which a deleted
- ;; continuation may appear in code:
- ;; -- The CONT of the LAST node in a block may be a deleted
- ;; continuation when the original receiver of the continuation's
- ;; value was deleted. Note that DEST in a deleted continuation is
- ;; null, so it is easy to know not to attempt delivering any
- ;; values to the continuation.
- ;; -- Unreachable code that hasn't been deleted yet may receive
- ;; deleted continuations. All such code will be in blocks that
- ;; have DELETE-P set. All unreachable code is deleted by control
- ;; optimization, so the backend doesn't have to worry about this.
+ ;; A continuation for which all control-related slots have the
+ ;; default values. A continuation is unused during IR1 conversion
+ ;; until it is assigned a block, and may be also be temporarily
+ ;; unused during later manipulations of IR1. In a consistent
+ ;; state there should never be any mention of :UNUSED
+ ;; continuations. NEXT can have a non-null value if the next node
+ ;; has already been determined.
;;
;; :BLOCK-START
- ;; The continuation that is the START of BLOCK. This is the only kind
- ;; of continuation that can have more than one use. The BLOCK's
- ;; START-USES is a list of all the uses.
- ;;
- ;; :DELETED-BLOCK-START
- ;; Like :BLOCK-START, but BLOCK has been deleted. A block starting
- ;; continuation is made into a deleted block start when the block is
- ;; deleted, but the continuation still may have value semantics.
- ;; Since there isn't any code left, next is null.
+ ;; The continuation that is the START of BLOCK.
;;
;; :INSIDE-BLOCK
- ;; A continuation that is the CONT of some node in BLOCK.
- (kind :unused :type (member :unused :deleted :inside-block :block-start
- :deleted-block-start))
- ;; The node which receives this value, if any. In a deleted continuation,
- ;; this is null even though the node that receives this continuation may not
- ;; yet be deleted.
- (dest nil :type (or node null))
- ;; If this is a NODE, then it is the node which is to be evaluated next.
- ;; This is always null in :DELETED and :UNUSED continuations, and will be
- ;; null in a :INSIDE-BLOCK continuation when this is the CONT of the LAST.
+ ;; A continuation that is the NEXT of some node in BLOCK.
+ (kind :unused :type (member :unused :inside-block :block-start))
+ ;; A NODE which is to be evaluated next. Null only temporary.
(next nil :type (or node null))
- ;; An assertion on the type of this continuation's value.
- (asserted-type *wild-type* :type ctype)
- ;; Cached type of this continuation's value. If NIL, then this must be
- ;; recomputed: see CONTINUATION-DERIVED-TYPE.
- (%derived-type nil :type (or ctype null))
- ;; Node where this continuation is used, if unique. This is always null in
- ;; :DELETED and :UNUSED continuations, and is never null in :INSIDE-BLOCK
- ;; continuations. In a :BLOCK-START continuation, the Block's START-USES
- ;; indicate whether NIL means no uses or more than one use.
+ ;; the node where this CTRAN is used, if unique. This is always null
+ ;; in :UNUSED and :BLOCK-START CTRANs, and is never null in
+ ;; :INSIDE-BLOCK continuations.
(use nil :type (or node null))
- ;; Basic block this continuation is in. This is null only in :DELETED and
- ;; :UNUSED continuations. Note that blocks that are unreachable but still in
- ;; the DFO may receive deleted continuations, so it isn't o.k. to assume that
- ;; any continuation that you pick up out of its DEST node has a BLOCK.
- (block nil :type (or cblock null))
- ;; Set to true when something about this continuation's value has changed.
- ;; See REOPTIMIZE-CONTINUATION. This provides a way for IR1 optimize to
- ;; determine which operands to a node have changed. If the optimizer for
- ;; this node type doesn't care, it can elect not to clear this flag.
+ ;; the basic block this continuation is in. This is null only in
+ ;; :UNUSED continuations.
+ (block nil :type (or cblock null)))
+
+(def!method print-object ((x ctran) stream)
+ (print-unreadable-object (x stream :type t :identity t)
+ (format stream " #~D" (cont-num x))))
+
+;;; Linear VARiable. Multiple-value (possibly of unknown number)
+;;; temporal storage.
+(def!struct (lvar
+ (:make-load-form-fun ignore-it)
+ (:constructor make-lvar (&optional dest)))
+ ;; The node which receives this value. NIL only temporarily.
+ (dest nil :type (or node null))
+ ;; cached type of this lvar's value. If NIL, then this must be
+ ;; recomputed: see LVAR-DERIVED-TYPE.
+ (%derived-type nil :type (or ctype null))
+ ;; the node (if unique) or a list of nodes where this lvar is used.
+ (uses nil :type (or node list))
+ ;; set to true when something about this lvar's value has
+ ;; changed. See REOPTIMIZE-LVAR. This provides a way for IR1
+ ;; optimize to determine which operands to a node have changed. If
+ ;; the optimizer for this node type doesn't care, it can elect not
+ ;; to clear this flag.
(reoptimize t :type boolean)
- ;; An indication of what we have proven about how this contination's type
- ;; assertion is satisfied:
- ;;
- ;; NIL
- ;; No type check is necessary (proven type is a subtype of the assertion.)
- ;;
- ;; T
- ;; A type check is needed.
- ;;
- ;; :DELETED
- ;; Don't do a type check, but believe (intersect) the assertion. A T
- ;; check can be changed to :DELETED if we somehow prove the check is
- ;; unnecessary, or if we eliminate it through a policy decision.
- ;;
- ;; :NO-CHECK
- ;; Type check generation sets the slot to this if a check is called for,
- ;; but it believes it has proven that the check won't be done for
- ;; policy reasons or because a safe implementation will be used. In the
- ;; latter case, LTN must ensure that a safe implementation *is* be used.
- ;;
- ;; :ERROR
- ;; There is a compile-time type error in some use of this continuation. A
- ;; type check should still be generated, but be careful.
- ;;
- ;; This is computed lazily by CONTINUATION-DERIVED-TYPE, so use
- ;; CONTINUATION-TYPE-CHECK instead of the %'ed slot accessor.
- (%type-check t :type (member t nil :deleted :no-check :error))
- ;; Something or other that the back end annotates this continuation with.
+ ;; Cached type which is checked by DEST. If NIL, then this must be
+ ;; recomputed: see LVAR-EXTERNALLY-CHECKABLE-TYPE.
+ (%externally-checkable-type nil :type (or null ctype))
+ ;; something or other that the back end annotates this lvar with
(info nil))
-(def!method print-object ((x continuation) stream)
- (print-unreadable-object (x stream :type t :identity t)))
-(defstruct (node (:constructor nil))
- ;; The bottom-up derived type for this node. This does not take into
- ;; consideration output type assertions on this node (actually on its CONT).
- (derived-type *wild-type* :type ctype)
- ;; True if this node needs to be optimized. This is set to true whenever
- ;; something changes about the value of a continuation whose DEST is this
- ;; node.
+(def!method print-object ((x lvar) stream)
+ (print-unreadable-object (x stream :type t :identity t)
+ (format stream " #~D" (cont-num x))))
+
+(defstruct (node (:constructor nil)
+ (:copier nil))
+ ;; unique ID for debugging
+ #!+sb-show (id (new-object-id) :read-only t)
+ ;; True if this node needs to be optimized. This is set to true
+ ;; whenever something changes about the value of an lvar whose DEST
+ ;; is this node.
(reoptimize t :type boolean)
- ;; The continuation which receives the value of this node. This also
- ;; indicates what we do controlwise after evaluating this node. This may be
- ;; null during IR1 conversion.
- (cont nil :type (or continuation null))
- ;; The continuation that this node is the next of. This is null during
- ;; IR1 conversion when we haven't linked the node in yet or in nodes that
- ;; have been deleted from the IR1 by UNLINK-NODE.
- (prev nil :type (or continuation null))
- ;; The lexical environment this node was converted in.
+ ;; the ctran indicating what we do controlwise after evaluating this
+ ;; node. This is null if the node is the last in its block.
+ (next nil :type (or ctran null))
+ ;; the ctran that this node is the NEXT of. This is null during IR1
+ ;; conversion when we haven't linked the node in yet or in nodes
+ ;; that have been deleted from the IR1 by UNLINK-NODE.
+ (prev nil :type (or ctran null))
+ ;; the lexical environment this node was converted in
(lexenv *lexenv* :type lexenv)
- ;; A representation of the source code responsible for generating this node.
+ ;; a representation of the source code responsible for generating
+ ;; this node
;;
- ;; For a form introduced by compilation (does not appear in the original
- ;; source), the path begins with a list of all the enclosing introduced
- ;; forms. This list is from the inside out, with the form immediately
- ;; responsible for this node at the head of the list.
+ ;; For a form introduced by compilation (does not appear in the
+ ;; original source), the path begins with a list of all the
+ ;; enclosing introduced forms. This list is from the inside out,
+ ;; with the form immediately responsible for this node at the head
+ ;; of the list.
;;
- ;; Following the introduced forms is a representation of the location of the
- ;; enclosing original source form. This transition is indicated by the magic
- ;; ORIGINAL-SOURCE-START marker. The first element of the orignal source is
- ;; the "form number", which is the ordinal number of this form in a
- ;; depth-first, left-to-right walk of the truly top-level form in which this
- ;; appears.
+ ;; Following the introduced forms is a representation of the
+ ;; location of the enclosing original source form. This transition
+ ;; is indicated by the magic ORIGINAL-SOURCE-START marker. The first
+ ;; element of the original source is the "form number", which is the
+ ;; ordinal number of this form in a depth-first, left-to-right walk
+ ;; of the truly-top-level form in which this appears.
;;
- ;; Following is a list of integers describing the path taken through the
- ;; source to get to this point:
+ ;; Following is a list of integers describing the path taken through
+ ;; the source to get to this point:
;; (K L M ...) => (NTH K (NTH L (NTH M ...)))
;;
- ;; The last element in the list is the top-level form number, which is the
- ;; ordinal number (in this call to the compiler) of the truly top-level form
- ;; containing the orignal source.
+ ;; The last element in the list is the top level form number, which
+ ;; is the ordinal number (in this call to the compiler) of the truly
+ ;; top level form containing the original source.
(source-path *current-path* :type list)
- ;; If this node is in a tail-recursive position, then this is set to T. At
- ;; the end of IR1 (in environment analysis) this is computed for all nodes
- ;; (after cleanup code has been emitted). Before then, a non-null value
- ;; indicates that IR1 optimization has converted a tail local call to a
- ;; direct transfer.
+ ;; If this node is in a tail-recursive position, then this is set to
+ ;; T. At the end of IR1 (in physical environment analysis) this is
+ ;; computed for all nodes (after cleanup code has been emitted).
+ ;; Before then, a non-null value indicates that IR1 optimization has
+ ;; converted a tail local call to a direct transfer.
;;
- ;; If the back-end breaks tail-recursion for some reason, then it can null
- ;; out this slot.
+ ;; If the back-end breaks tail-recursion for some reason, then it
+ ;; can null out this slot.
(tail-p nil :type boolean))
-;;; Flags that are used to indicate various things about a block, such as what
-;;; optimizations need to be done on it:
+(defstruct (valued-node (:conc-name node-)
+ (:include node)
+ (:constructor nil)
+ (:copier nil))
+ ;; the bottom-up derived type for this node.
+ (derived-type *wild-type* :type ctype)
+ ;; Lvar, receiving the values, produced by this node. May be NIL if
+ ;; the value is unused.
+ (lvar nil :type (or lvar null)))
+
+;;; Flags that are used to indicate various things about a block, such
+;;; as what optimizations need to be done on it:
;;; -- REOPTIMIZE is set when something interesting happens the uses of a
-;;; continuation whose Dest is in this block. This indicates that the
+;;; lvar whose DEST is in this block. This indicates that the
;;; value-driven (forward) IR1 optimizations should be done on this block.
;;; -- FLUSH-P is set when code in this block becomes potentially flushable,
-;;; usually due to a continuation's DEST becoming null.
+;;; usually due to an lvar's DEST becoming null.
;;; -- TYPE-CHECK is true when the type check phase should be run on this
;;; block. IR1 optimize can introduce new blocks after type check has
;;; already run. We need to check these blocks, but there is no point in
;;; checking blocks we have already checked.
;;; -- DELETE-P is true when this block is used to indicate that this block
;;; has been determined to be unreachable and should be deleted. IR1
-;;; phases should not attempt to examine or modify blocks with DELETE-P
+;;; phases should not attempt to examine or modify blocks with DELETE-P
;;; set, since they may:
;;; - be in the process of being deleted, or
-;;; - have no successors, or
-;;; - receive :DELETED continuations.
+;;; - have no successors.
;;; -- TYPE-ASSERTED, TEST-MODIFIED
-;;; These flags are used to indicate that something in this block might be
-;;; of interest to constraint propagation. TYPE-ASSERTED is set when a
-;;; continuation type assertion is strengthened. TEST-MODIFIED is set
-;;; whenever the test for the ending IF has changed (may be true when there
-;;; is no IF.)
-(def-boolean-attribute block
+;;; These flags are used to indicate that something in this block
+;;; might be of interest to constraint propagation. TYPE-ASSERTED
+;;; is set when an lvar type assertion is strengthened.
+;;; TEST-MODIFIED is set whenever the test for the ending IF has
+;;; changed (may be true when there is no IF.)
+(!def-boolean-attribute block
reoptimize flush-p type-check delete-p type-asserted test-modified)
+;;; FIXME: Tweak so that definitions of e.g. BLOCK-DELETE-P is
+;;; findable by grep for 'def.*block-delete-p'.
(macrolet ((frob (slot)
`(defmacro ,(symbolicate "BLOCK-" slot) (block)
`(block-attributep (block-flags ,block) ,',slot))))
(frob type-asserted)
(frob test-modified))
-;;; The CBLOCK structure represents a basic block. We include SSET-ELEMENT so
-;;; that we can have sets of blocks. Initially the SSET-ELEMENT-NUMBER is
-;;; null, DFO analysis numbers in reverse DFO. During IR2 conversion, IR1
-;;; blocks are re-numbered in forward emit order. This latter numbering also
-;;; forms the basis of the block numbering in the debug-info (though that is
-;;; relative to the start of the function.)
+;;; The CBLOCK structure represents a basic block. We include
+;;; SSET-ELEMENT so that we can have sets of blocks. Initially the
+;;; SSET-ELEMENT-NUMBER is null, DFO analysis numbers in reverse DFO.
+;;; During IR2 conversion, IR1 blocks are re-numbered in forward emit
+;;; order. This latter numbering also forms the basis of the block
+;;; numbering in the debug-info (though that is relative to the start
+;;; of the function.)
(defstruct (cblock (:include sset-element)
(:constructor make-block (start))
(:constructor make-block-key)
(:conc-name block-)
- (:predicate block-p)
- (:copier copy-block))
- ;; A list of all the blocks that are predecessors/successors of this block.
- ;; In well-formed IR1, most blocks will have one successor. The only
- ;; exceptions are:
+ (:predicate block-p))
+ ;; a list of all the blocks that are predecessors/successors of this
+ ;; block. In well-formed IR1, most blocks will have one successor.
+ ;; The only exceptions are:
;; 1. component head blocks (any number)
;; 2. blocks ending in an IF (1 or 2)
;; 3. blocks with DELETE-P set (zero)
(pred nil :type list)
(succ nil :type list)
- ;; The continuation which heads this block (either a :Block-Start or
- ;; :Deleted-Block-Start.) Null when we haven't made the start continuation
- ;; yet (and in the dummy component head and tail blocks.)
- (start nil :type (or continuation null))
- ;; A list of all the nodes that have Start as their Cont.
- (start-uses nil :type list)
- ;; The last node in this block. This is null when we are in the process of
- ;; building a block (and in the dummy component head and tail blocks.)
+ ;; the ctran which heads this block (a :BLOCK-START), or NIL when we
+ ;; haven't made the start ctran yet (and in the dummy component head
+ ;; and tail blocks)
+ (start nil :type (or ctran null))
+ ;; the last node in this block. This is NIL when we are in the
+ ;; process of building a block (and in the dummy component head and
+ ;; tail blocks.)
(last nil :type (or node null))
- ;; The forward and backward links in the depth-first ordering of the blocks.
- ;; These slots are null at beginning/end.
+ ;; the forward and backward links in the depth-first ordering of the
+ ;; blocks. These slots are NIL at beginning/end.
(next nil :type (or null cblock))
(prev nil :type (or null cblock))
;; This block's attributes: see above.
(flags (block-attributes reoptimize flush-p type-check type-asserted
test-modified)
:type attributes)
- ;; Some sets used by constraint propagation.
+ ;; in constraint propagation: list of LAMBDA-VARs killed in this block
+ ;; in copy propagation: list of killed TNs
(kill nil)
+ ;; other sets used in constraint propagation and/or copy propagation
(gen nil)
(in nil)
(out nil)
- ;; The component this block is in. Null temporarily during IR1 conversion
- ;; and in deleted blocks.
- (component *current-component* :type (or component null))
- ;; A flag used by various graph-walking code to determine whether this block
- ;; has been processed already or what. We make this initially NIL so that
- ;; Find-Initial-DFO doesn't have to scan the entire initial component just to
- ;; clear the flags.
+ ;; the component this block is in, or NIL temporarily during IR1
+ ;; conversion and in deleted blocks
+ (component (progn
+ (aver-live-component *current-component*)
+ *current-component*)
+ :type (or component null))
+ ;; a flag used by various graph-walking code to determine whether
+ ;; this block has been processed already or what. We make this
+ ;; initially NIL so that FIND-INITIAL-DFO doesn't have to scan the
+ ;; entire initial component just to clear the flags.
(flag nil)
- ;; Some kind of info used by the back end.
+ ;; some kind of info used by the back end
(info nil)
- ;; If true, then constraints that hold in this block and its successors by
- ;; merit of being tested by its IF predecessor.
+ ;; constraints that hold in this block and its successors by merit
+ ;; of being tested by its IF predecessors.
(test-constraint nil :type (or sset null)))
(def!method print-object ((cblock cblock) stream)
(print-unreadable-object (cblock stream :type t :identity t)
- (format stream ":START c~D" (cont-num (block-start cblock)))))
+ (format stream "~W :START c~W"
+ (block-number cblock)
+ (cont-num (block-start cblock)))))
-;;; The Block-Annotation structure is shared (via :include) by different
-;;; block-info annotation structures so that code (specifically control
-;;; analysis) can be shared.
-(defstruct (block-annotation (:constructor nil))
- ;; The IR1 block that this block is in the Info for.
- (block (required-argument) :type cblock)
- ;; The next and previous block in emission order (not DFO). This determines
- ;; which block we drop though to, and also used to chain together overflow
- ;; blocks that result from splitting of IR2 blocks in lifetime analysis.
+;;; The BLOCK-ANNOTATION class is inherited (via :INCLUDE) by
+;;; different BLOCK-INFO annotation structures so that code
+;;; (specifically control analysis) can be shared.
+(defstruct (block-annotation (:constructor nil)
+ (:copier nil))
+ ;; The IR1 block that this block is in the INFO for.
+ (block (missing-arg) :type cblock)
+ ;; the next and previous block in emission order (not DFO). This
+ ;; determines which block we drop though to, and is also used to
+ ;; chain together overflow blocks that result from splitting of IR2
+ ;; blocks in lifetime analysis.
(next nil :type (or block-annotation null))
(prev nil :type (or block-annotation null)))
-;;; The Component structure provides a handle on a connected piece of the flow
-;;; graph. Most of the passes in the compiler operate on components rather
-;;; than on the entire flow graph.
-(defstruct component
- ;; The kind of component:
- ;;
- ;; NIL
- ;; An ordinary component, containing non-top-level code.
+;;; A COMPONENT structure provides a handle on a connected piece of
+;;; the flow graph. Most of the passes in the compiler operate on
+;;; COMPONENTs rather than on the entire flow graph.
+;;;
+;;; According to the CMU CL internals/front.tex, the reason for
+;;; separating compilation into COMPONENTs is
+;;; to increase the efficiency of large block compilations. In
+;;; addition to improving locality of reference and reducing the
+;;; size of flow analysis problems, this allows back-end data
+;;; structures to be reclaimed after the compilation of each
+;;; component.
+(defstruct (component (:copier nil)
+ (:constructor
+ make-component (head tail &aux (last-block tail))))
+ ;; unique ID for debugging
+ #!+sb-show (id (new-object-id) :read-only t)
+ ;; the kind of component
;;
- ;; :Top-Level
- ;; A component containing only load-time code.
+ ;; (The terminology here is left over from before
+ ;; sbcl-0.pre7.34.flaky5.2, when there was no such thing as
+ ;; FUNCTIONAL-HAS-EXTERNAL-REFERENCES-P, so that Python was
+ ;; incapable of building standalone :EXTERNAL functions, but instead
+ ;; had to implement things like #'CL:COMPILE as FUNCALL of a little
+ ;; toplevel stub whose sole purpose was to return an :EXTERNAL
+ ;; function.)
;;
- ;; :Complex-Top-Level
- ;; A component containing both top-level and run-time code.
+ ;; The possibilities are:
+ ;; NIL
+ ;; an ordinary component, containing non-top-level code
+ ;; :TOPLEVEL
+ ;; a component containing only load-time code
+ ;; :COMPLEX-TOPLEVEL
+ ;; In the old system, before FUNCTIONAL-HAS-EXTERNAL-REFERENCES-P
+ ;; was defined, this was necessarily a component containing both
+ ;; top level and run-time code. Now this state is also used for
+ ;; a component with HAS-EXTERNAL-REFERENCES-P functionals in it.
+ ;; :INITIAL
+ ;; the result of initial IR1 conversion, on which component
+ ;; analysis has not been done
+ ;; :DELETED
+ ;; debris left over from component analysis
;;
- ;; :Initial
- ;; The result of initial IR1 conversion, on which component analysis has
- ;; not been done.
+ ;; See also COMPONENT-TOPLEVELISH-P.
+ (kind nil :type (member nil :toplevel :complex-toplevel :initial :deleted))
+ ;; the blocks that are the dummy head and tail of the DFO
;;
- ;; :Deleted
- ;; Debris left over from component analysis.
- (kind nil :type (member nil :top-level :complex-top-level :initial :deleted))
- ;; The blocks that are the dummy head and tail of the DFO.
;; Entry/exit points have these blocks as their
- ;; predecessors/successors. Null temporarily. The start and return
- ;; from each non-deleted function is linked to the component head
- ;; and tail. Until environment analysis links NLX entry stubs to the
- ;; component head, every successor of the head is a function start
- ;; (i.e. begins with a Bind node.)
- (head nil :type (or null cblock))
- (tail nil :type (or null cblock))
- ;; A list of the CLambda structures for all functions in this
- ;; component. Optional-Dispatches are represented only by their XEP
- ;; and other associated lambdas. This doesn't contain any deleted or
- ;; let lambdas.
+ ;; predecessors/successors. The start and return from each
+ ;; non-deleted function is linked to the component head and
+ ;; tail. Until physical environment analysis links NLX entry stubs
+ ;; to the component head, every successor of the head is a function
+ ;; start (i.e. begins with a BIND node.)
+ (head (missing-arg) :type cblock)
+ (tail (missing-arg) :type cblock)
+ ;; New blocks are inserted before this.
+ (last-block (missing-arg) :type cblock)
+ ;; This becomes a list of the CLAMBDA structures for all functions
+ ;; in this component. OPTIONAL-DISPATCHes are represented only by
+ ;; their XEP and other associated lambdas. This doesn't contain any
+ ;; deleted or LET lambdas.
+ ;;
+ ;; Note that logical associations between CLAMBDAs and COMPONENTs
+ ;; seem to exist for a while before this is initialized. See e.g.
+ ;; the NEW-FUNCTIONALS slot. In particular, I got burned by writing
+ ;; some code to use this value to decide which components need
+ ;; LOCALL-ANALYZE-COMPONENT, when it turns out that
+ ;; LOCALL-ANALYZE-COMPONENT had a role in initializing this value
+ ;; (and DFO stuff does too, maybe). Also, even after it's
+ ;; initialized, it might change as CLAMBDAs are deleted or merged.
+ ;; -- WHN 2001-09-30
(lambdas () :type list)
- ;; A list of Functional structures for functions that are newly
- ;; converted, and haven't been local-call analyzed yet. Initially
- ;; functions are not in the Lambdas list. LOCAL-CALL-ANALYZE moves
- ;; them there (possibly as LETs, or implicitly as XEPs if an
- ;; OPTIONAL-DISPATCH.) Between runs of LOCAL-CALL-ANALYZE there may
- ;; be some debris of converted or even deleted functions in this
- ;; list.
- (new-functions () :type list)
- ;; If true, then there is stuff in this component that could benefit
- ;; from further IR1 optimization.
+ ;; a list of FUNCTIONALs for functions that are newly converted, and
+ ;; haven't been local-call analyzed yet. Initially functions are not
+ ;; in the LAMBDAS list. Local call analysis moves them there
+ ;; (possibly as LETs, or implicitly as XEPs if an OPTIONAL-DISPATCH.)
+ ;; Between runs of local call analysis there may be some debris of
+ ;; converted or even deleted functions in this list.
+ (new-functionals () :type list)
+ ;; If this is true, then there is stuff in this component that could
+ ;; benefit from further IR1 optimization.
(reoptimize t :type boolean)
- ;; If true, then the control flow in this component was messed up by
- ;; IR1 optimizations. The DFO should be recomputed.
+ ;; If this is true, then the control flow in this component was
+ ;; messed up by IR1 optimizations, so the DFO should be recomputed.
(reanalyze nil :type boolean)
- ;; String that is some sort of name for the code in this component.
+ ;; some sort of name for the code in this component
(name "<unknown>" :type simple-string)
- ;; Some kind of info used by the back end.
- (info nil)
- ;; The Source-Info structure describing where this component was
- ;; compiled from.
+ ;; When I am a child, this is :NO-IR2-YET.
+ ;; In my adulthood, IR2 stores notes to itself here.
+ ;; After I have left the great wheel and am staring into the GC, this
+ ;; is set to :DEAD to indicate that it's a gruesome error to operate
+ ;; on me (e.g. by using me as *CURRENT-COMPONENT*, or by pushing
+ ;; LAMBDAs onto my NEW-FUNCTIONALS, as in sbcl-0.pre7.115).
+ (info :no-ir2-yet :type (or ir2-component (member :no-ir2-yet :dead)))
+ ;; the SOURCE-INFO structure describing where this component was
+ ;; compiled from
(source-info *source-info* :type source-info)
- ;; Count of the number of inline expansions we have done while
+ ;; count of the number of inline expansions we have done while
;; compiling this component, to detect infinite or exponential
- ;; blowups.
+ ;; blowups
(inline-expansions 0 :type index)
- ;; A hashtable from combination nodes to things describing how an
- ;; optimization of the node failed. The value is an alist (Transform
- ;; . Args), where Transform is the structure describing the
- ;; transform that failed, and Args is either a list of format
- ;; arguments for the note, or the FUNCTION-TYPE that would have
+ ;; a map from combination nodes to things describing how an
+ ;; optimization of the node failed. The description is an alist
+ ;; (TRANSFORM . ARGS), where TRANSFORM is the structure describing
+ ;; the transform that failed, and ARGS is either a list of format
+ ;; arguments for the note, or the FUN-TYPE that would have
;; enabled the transformation but failed to match.
(failed-optimizations (make-hash-table :test 'eq) :type hash-table)
- ;; Similar to NEW-FUNCTIONS, but is used when a function has already
- ;; been analyzed, but new references have been added by inline
- ;; expansion. Unlike NEW-FUNCTIONS, this is not disjoint from
- ;; COMPONENT-LAMBDAS.
- (reanalyze-functions nil :type list))
-(defprinter (component)
+ ;; This is similar to NEW-FUNCTIONALS, but is used when a function
+ ;; has already been analyzed, but new references have been added by
+ ;; inline expansion. Unlike NEW-FUNCTIONALS, this is not disjoint
+ ;; from COMPONENT-LAMBDAS.
+ (reanalyze-functionals nil :type list))
+(defprinter (component :identity t)
name
+ #!+sb-show id
(reanalyze :test reanalyze))
-;;; The Cleanup structure represents some dynamic binding action.
-;;; Blocks are annotated with the current cleanup so that dynamic
-;;; bindings can be removed when control is transferred out of the
-;;; binding environment. We arrange for changes in dynamic bindings to
-;;; happen at block boundaries, so that cleanup code may easily be
-;;; inserted. The "mess-up" action is explicitly represented by a
-;;; funny function call or Entry node.
+;;; Check that COMPONENT is suitable for roles which involve adding
+;;; new code. (gotta love imperative programming with lotso in-place
+;;; side effects...)
+(defun aver-live-component (component)
+ ;; FIXME: As of sbcl-0.pre7.115, we're asserting that
+ ;; COMPILE-COMPONENT hasn't happened yet. Might it be even better
+ ;; (certainly stricter, possibly also correct...) to assert that
+ ;; IR1-FINALIZE hasn't happened yet?
+ (aver (not (eql (component-info component) :dead))))
+
+;;; Before sbcl-0.7.0, there were :TOPLEVEL things which were magical
+;;; in multiple ways. That's since been refactored into the orthogonal
+;;; properties "optimized for locall with no arguments" and "externally
+;;; visible/referenced (so don't delete it)". The code <0.7.0 did a lot
+;;; of tests a la (EQ KIND :TOP_LEVEL) in the "don't delete it?" sense;
+;;; this function is a sort of literal translation of those tests into
+;;; the new world.
+;;;
+;;; FIXME: After things settle down, bare :TOPLEVEL might go away, at
+;;; which time it might be possible to replace the COMPONENT-KIND
+;;; :TOPLEVEL mess with a flag COMPONENT-HAS-EXTERNAL-REFERENCES-P
+;;; along the lines of FUNCTIONAL-HAS-EXTERNAL-REFERENCES-P.
+(defun lambda-toplevelish-p (clambda)
+ (or (eql (lambda-kind clambda) :toplevel)
+ (lambda-has-external-references-p clambda)))
+(defun component-toplevelish-p (component)
+ (member (component-kind component)
+ '(:toplevel :complex-toplevel)))
+
+;;; A CLEANUP structure represents some dynamic binding action. Blocks
+;;; are annotated with the current CLEANUP so that dynamic bindings
+;;; can be removed when control is transferred out of the binding
+;;; environment. We arrange for changes in dynamic bindings to happen
+;;; at block boundaries, so that cleanup code may easily be inserted.
+;;; The "mess-up" action is explicitly represented by a funny function
+;;; call or ENTRY node.
;;;
-;;; We guarantee that cleanups only need to be done at block boundaries
-;;; by requiring that the exit continuations initially head their
+;;; We guarantee that CLEANUPs only need to be done at block
+;;; boundaries by requiring that the exit ctrans initially head their
;;; blocks, and then by not merging blocks when there is a cleanup
;;; change.
-(defstruct cleanup
- ;; The kind of thing that has to be cleaned up.
- (kind (required-argument)
+(defstruct (cleanup (:copier nil))
+ ;; the kind of thing that has to be cleaned up
+ (kind (missing-arg)
:type (member :special-bind :catch :unwind-protect :block :tagbody))
- ;; The node that messes things up. This is the last node in the
+ ;; the node that messes things up. This is the last node in the
;; non-messed-up environment. Null only temporarily. This could be
;; deleted due to unreachability.
(mess-up nil :type (or node null))
- ;; A list of all the NLX-Info structures whose NLX-Info-Cleanup is
- ;; this cleanup. This is filled in by environment analysis.
+ ;; a list of all the NLX-INFO structures whose NLX-INFO-CLEANUP is
+ ;; this cleanup. This is filled in by physical environment analysis.
(nlx-info nil :type list))
-(defprinter (cleanup)
+(defprinter (cleanup :identity t)
kind
mess-up
(nlx-info :test nlx-info))
-;;; The Environment structure represents the result of Environment analysis.
-(defstruct environment
- ;; The function that allocates this environment.
- (function (required-argument) :type clambda)
- ;; A list of all the Lambdas that allocate variables in this environment.
- (lambdas nil :type list)
- ;; A list of all the lambda-vars and NLX-Infos needed from enclosing
- ;; environments by code in this environment.
+;;; A PHYSENV represents the result of physical environment analysis.
+;;;
+;;; As far as I can tell from reverse engineering, this IR1 structure
+;;; represents the physical environment (which is probably not the
+;;; standard Lispy term for this concept, but I dunno what is the
+;;; standard term): those things in the lexical environment which a
+;;; LAMBDA actually interacts with. Thus in
+;;; (DEFUN FROB-THINGS (THINGS)
+;;; (DOLIST (THING THINGS)
+;;; (BLOCK FROBBING-ONE-THING
+;;; (MAPCAR (LAMBDA (PATTERN)
+;;; (WHEN (FITS-P THING PATTERN)
+;;; (RETURN-FROM FROB-THINGS (LIST :FIT THING PATTERN))))
+;;; *PATTERNS*))))
+;;; the variables THINGS, THING, and PATTERN and the block names
+;;; FROB-THINGS and FROBBING-ONE-THING are all in the inner LAMBDA's
+;;; lexical environment, but of those only THING, PATTERN, and
+;;; FROB-THINGS are in its physical environment. In IR1, we largely
+;;; just collect the names of these things; in IR2 an IR2-PHYSENV
+;;; structure is attached to INFO and used to keep track of
+;;; associations between these names and less-abstract things (like
+;;; TNs, or eventually stack slots and registers). -- WHN 2001-09-29
+(defstruct (physenv (:copier nil))
+ ;; the function that allocates this physical environment
+ (lambda (missing-arg) :type clambda :read-only t)
+ ;; This ultimately converges to a list of all the LAMBDA-VARs and
+ ;; NLX-INFOs needed from enclosing environments by code in this
+ ;; physical environment. In the meantime, it may be
+ ;; * NIL at object creation time
+ ;; * a superset of the correct result, generated somewhat later
+ ;; * smaller and smaller sets converging to the correct result as
+ ;; we notice and delete unused elements in the superset
(closure nil :type list)
- ;; A list of NLX-Info structures describing all the non-local exits into this
- ;; environment.
+ ;; a list of NLX-INFO structures describing all the non-local exits
+ ;; into this physical environment
(nlx-info nil :type list)
- ;; Some kind of info used by the back end.
+ ;; some kind of info used by the back end
(info nil))
-(defprinter (environment)
- function
+(defprinter (physenv :identity t)
+ lambda
(closure :test closure)
(nlx-info :test nlx-info))
-;;; The Tail-Set structure is used to accmumlate information about
-;;; tail-recursive local calls. The "tail set" is effectively the transitive
-;;; closure of the "is called tail-recursively by" relation.
+;;; An TAIL-SET structure is used to accumulate information about
+;;; tail-recursive local calls. The "tail set" is effectively the
+;;; transitive closure of the "is called tail-recursively by"
+;;; relation.
;;;
-;;; All functions in the same tail set share the same Tail-Set structure.
-;;; Initially each function has its own Tail-Set, but when IR1-OPTIMIZE-RETURN
-;;; notices a tail local call, it joins the tail sets of the called function
-;;; and the calling function.
+;;; All functions in the same tail set share the same TAIL-SET
+;;; structure. Initially each function has its own TAIL-SET, but when
+;;; IR1-OPTIMIZE-RETURN notices a tail local call, it joins the tail
+;;; sets of the called function and the calling function.
;;;
-;;; The tail set is somewhat approximate, because it is too early to be sure
-;;; which calls will be TR. Any call that *might* end up TR causes tail-set
-;;; merging.
-(defstruct tail-set
- ;; A list of all the lambdas in this tail set.
- (functions nil :type list)
- ;; Our current best guess of the type returned by these functions. This is
- ;; the union across all the functions of the return node's Result-Type.
- ;; excluding local calls.
+;;; The tail set is somewhat approximate, because it is too early to
+;;; be sure which calls will be tail-recursive. Any call that *might*
+;;; end up tail-recursive causes TAIL-SET merging.
+(defstruct (tail-set)
+ ;; a list of all the LAMBDAs in this tail set
+ (funs nil :type list)
+ ;; our current best guess of the type returned by these functions.
+ ;; This is the union across all the functions of the return node's
+ ;; RESULT-TYPE, excluding local calls.
(type *wild-type* :type ctype)
- ;; Some info used by the back end.
+ ;; some info used by the back end
(info nil))
-(defprinter (tail-set)
- functions
+(defprinter (tail-set :identity t)
+ funs
type
(info :test info))
-;;; The NLX-Info structure is used to collect various information about
-;;; non-local exits. This is effectively an annotation on the Continuation,
-;;; although it is accessed by searching in the Environment-Nlx-Info.
-(def!struct (nlx-info (:make-load-form-fun ignore-it))
- ;; The cleanup associated with this exit. In a catch or unwind-protect, this
- ;; is the :Catch or :Unwind-Protect cleanup, and not the cleanup for the
- ;; escape block. The Cleanup-Kind of this thus provides a good indication of
- ;; what kind of exit is being done.
- (cleanup (required-argument) :type cleanup)
- ;; The continuation exited to (the CONT of the EXIT nodes.) If this exit is
- ;; from an escape function (CATCH or UNWIND-PROTECT), then environment
- ;; analysis deletes the escape function and instead has the %NLX-ENTRY use
- ;; this continuation.
+;;; An NLX-INFO structure is used to collect various information about
+;;; non-local exits. This is effectively an annotation on the
+;;; continuation, although it is accessed by searching in the
+;;; PHYSENV-NLX-INFO.
+(def!struct (nlx-info (:constructor make-nlx-info
+ (cleanup exit &aux (lvar (node-lvar exit))))
+ (:make-load-form-fun ignore-it))
+ ;; the cleanup associated with this exit. In a catch or
+ ;; unwind-protect, this is the :CATCH or :UNWIND-PROTECT cleanup,
+ ;; and not the cleanup for the escape block. The CLEANUP-KIND of
+ ;; this thus provides a good indication of what kind of exit is
+ ;; being done.
+ (cleanup (missing-arg) :type cleanup)
+ ;; the continuation exited to (the CONT of the EXIT nodes). If this
+ ;; exit is from an escape function (CATCH or UNWIND-PROTECT), then
+ ;; physical environment analysis deletes the escape function and
+ ;; instead has the %NLX-ENTRY use this continuation.
;;
- ;; This slot is primarily an indication of where this exit delivers its
- ;; values to (if any), but it is also used as a sort of name to allow us to
- ;; find the NLX-Info that corresponds to a given exit. For this purpose, the
- ;; Entry must also be used to disambiguate, since exits to different places
- ;; may deliver their result to the same continuation.
- (continuation (required-argument) :type continuation)
- ;; The entry stub inserted by environment analysis. This is a block
- ;; containing a call to the %NLX-Entry funny function that has the original
- ;; exit destination as its successor. Null only temporarily.
+ ;; This slot is primarily an indication of where this exit delivers
+ ;; its values to (if any), but it is also used as a sort of name to
+ ;; allow us to find the NLX-INFO that corresponds to a given exit.
+ ;; For this purpose, the ENTRY must also be used to disambiguate,
+ ;; since exits to different places may deliver their result to the
+ ;; same continuation.
+ (exit (missing-arg) :type exit)
+ (lvar (missing-arg) :type (or lvar null))
+ ;; the entry stub inserted by physical environment analysis. This is
+ ;; a block containing a call to the %NLX-ENTRY funny function that
+ ;; has the original exit destination as its successor. Null only
+ ;; temporarily.
(target nil :type (or cblock null))
- ;; Some kind of info used by the back end.
+ ;; some kind of info used by the back end
info)
-(defprinter (nlx-info)
- continuation
+(defprinter (nlx-info :identity t)
+ exit
target
info)
\f
;;; hacking the flow graph.
(def!struct (leaf (:make-load-form-fun ignore-it)
(:constructor nil))
- ;; Some name for this leaf. The exact significance of the name
- ;; depends on what kind of leaf it is. In a Lambda-Var or
- ;; Global-Var, this is the symbol name of the variable. In a
- ;; functional that is from a DEFUN, this is the defined name. In
- ;; other functionals, this is a descriptive string.
- (name nil :type t)
- ;; The type which values of this leaf must have.
+ ;; unique ID for debugging
+ #!+sb-show (id (new-object-id) :read-only t)
+ ;; (For public access to this slot, use LEAF-SOURCE-NAME.)
+ ;;
+ ;; the name of LEAF as it appears in the source, e.g. 'FOO or '(SETF
+ ;; FOO) or 'N or '*Z*, or the special .ANONYMOUS. value if there's
+ ;; no name for this thing in the source (as can happen for
+ ;; FUNCTIONALs, e.g. for anonymous LAMBDAs or for functions for
+ ;; top-level forms; and can also happen for anonymous constants) or
+ ;; perhaps also if the match between the name and the thing is
+ ;; skewed enough (e.g. for macro functions or method functions) that
+ ;; we don't want to have that name affect compilation
+ ;;
+ ;; (We use .ANONYMOUS. here more or less the way we'd ordinarily use
+ ;; NIL, but we're afraid to use NIL because it's a symbol which could
+ ;; be the name of a leaf, if only the constant named NIL.)
+ ;;
+ ;; The value of this slot in can affect ordinary runtime behavior,
+ ;; e.g. of special variables and known functions, not just debugging.
+ ;;
+ ;; See also the LEAF-DEBUG-NAME function and the
+ ;; FUNCTIONAL-%DEBUG-NAME slot.
+ (%source-name (missing-arg)
+ :type (or symbol (and cons (satisfies legal-fun-name-p)))
+ :read-only t)
+ ;; the type which values of this leaf must have
(type *universal-type* :type ctype)
- ;; Where the Type information came from:
+ ;; where the TYPE information came from:
;; :DECLARED, from a declaration.
;; :ASSUMED, from uses of the object.
;; :DEFINED, from examination of the definition.
- ;; FIXME: This should be a named type. (LEAF-WHERE-FROM?)
+ ;; FIXME: This should be a named type. (LEAF-WHERE-FROM? Or
+ ;; perhaps just WHERE-FROM, since it's not just used in LEAF,
+ ;; but also in various DEFINE-INFO-TYPEs in globaldb.lisp,
+ ;; and very likely elsewhere too.)
(where-from :assumed :type (member :declared :assumed :defined))
- ;; List of the Ref nodes for this leaf.
+ ;; list of the REF nodes for this leaf
(refs () :type list)
- ;; True if there was ever a Ref or Set node for this leaf. This may
- ;; be true when Refs and Sets are null, since code can be deleted.
+ ;; true if there was ever a REF or SET node for this leaf. This may
+ ;; be true when REFS and SETS are null, since code can be deleted.
(ever-used nil :type boolean)
- ;; Some kind of info used by the back end.
+ ;; some kind of info used by the back end
(info nil))
-;;; The Constant structure is used to represent known constant values.
-;;; If Name is not null, then it is the name of the named constant
+;;; LEAF name operations
+;;;
+;;; KLUDGE: wants CLOS..
+(defun leaf-has-source-name-p (leaf)
+ (not (eq (leaf-%source-name leaf)
+ '.anonymous.)))
+(defun leaf-source-name (leaf)
+ (aver (leaf-has-source-name-p leaf))
+ (leaf-%source-name leaf))
+(defun leaf-debug-name (leaf)
+ (if (functional-p leaf)
+ ;; FUNCTIONALs have additional %DEBUG-NAME behavior.
+ (functional-debug-name leaf)
+ ;; Other objects just use their source name.
+ ;;
+ ;; (As of sbcl-0.pre7.85, there are a few non-FUNCTIONAL
+ ;; anonymous objects, (anonymous constants..) and those would
+ ;; fail here if we ever tried to get debug names from them, but
+ ;; it looks as though it's never interesting to get debug names
+ ;; from them, so it's moot. -- WHN)
+ (leaf-source-name leaf)))
+
+;;; The CONSTANT structure is used to represent known constant values.
+;;; If NAME is not null, then it is the name of the named constant
;;; which this leaf corresponds to, otherwise this is an anonymous
;;; constant.
(def!struct (constant (:include leaf))
- ;; The value of the constant.
+ ;; the value of the constant
(value nil :type t))
-(defprinter (constant)
- (name :test name)
+(defprinter (constant :identity t)
+ (%source-name :test %source-name)
value)
-;;; The Basic-Var structure represents information common to all
+;;; The BASIC-VAR structure represents information common to all
;;; variables which don't correspond to known local functions.
-(def!struct (basic-var (:include leaf) (:constructor nil))
+(def!struct (basic-var (:include leaf)
+ (:constructor nil))
;; Lists of the set nodes for this variable.
(sets () :type list))
-;;; The Global-Var structure represents a value hung off of the symbol
-;;; Name. We use a :Constant Var when we know that the thing is a
-;;; constant, but don't know what the value is at compile time.
+;;; The GLOBAL-VAR structure represents a value hung off of the symbol
+;;; NAME.
(def!struct (global-var (:include basic-var))
- ;; Kind of variable described.
- (kind (required-argument)
- :type (member :special :global-function :constant :global)))
-(defprinter (global-var)
- name
+ ;; kind of variable described
+ (kind (missing-arg)
+ :type (member :special :global-function :global)))
+(defprinter (global-var :identity t)
+ %source-name
+ #!+sb-show id
(type :test (not (eq type *universal-type*)))
(where-from :test (not (eq where-from :assumed)))
kind)
-;;; The Slot-Accessor structure represents slot accessor functions. It
-;;; is a subtype of Global-Var to make it look more like a normal
-;;; function.
-(def!struct (slot-accessor (:include global-var
- (where-from :defined)
- (kind :global-function)))
- ;; The description of the structure that this is an accessor for.
- (for (required-argument) :type sb!xc:class)
- ;; The slot description of the slot.
- (slot (required-argument)))
-(defprinter (slot-accessor)
- name
- for
- slot)
-
-;;; The Defined-Function structure represents functions that are
-;;; defined in the same compilation block, or that have inline
-;;; expansions, or have a non-NIL INLINEP value. Whenever we change
-;;; the INLINEP state (i.e. an inline proclamation) we copy the
-;;; structure so that former inlinep values are preserved.
-(def!struct (defined-function (:include global-var
- (where-from :defined)
- (kind :global-function)))
+;;; A DEFINED-FUN represents a function that is defined in the same
+;;; compilation block, or that has an inline expansion, or that has a
+;;; non-NIL INLINEP value. Whenever we change the INLINEP state (i.e.
+;;; an inline proclamation) we copy the structure so that former
+;;; INLINEP values are preserved.
+(def!struct (defined-fun (:include global-var
+ (where-from :defined)
+ (kind :global-function)))
;; The values of INLINEP and INLINE-EXPANSION initialized from the
;; global environment.
(inlinep nil :type inlinep)
(inline-expansion nil :type (or cons null))
- ;; The block-local definition of this function (either because it
- ;; was semi-inline, or because it was defined in this block.) If
+ ;; the block-local definition of this function (either because it
+ ;; was semi-inline, or because it was defined in this block). If
;; this function is not an entry point, then this may be deleted or
- ;; let-converted. Null if we haven't converted the expansion yet.
+ ;; LET-converted. Null if we haven't converted the expansion yet.
(functional nil :type (or functional null)))
-(defprinter (defined-function)
- name
+(defprinter (defined-fun :identity t)
+ %source-name
+ #!+sb-show id
inlinep
(functional :test functional))
\f
;;; We don't normally manipulate function types for defined functions,
;;; but if someone wants to know, an approximation is there.
(def!struct (functional (:include leaf
+ (%source-name '.anonymous.)
(where-from :defined)
(type (specifier-type 'function))))
- ;; Some information about how this function is used. These values are
- ;; meaningful:
+ ;; (For public access to this slot, use LEAF-DEBUG-NAME.)
+ ;;
+ ;; the name of FUNCTIONAL for debugging purposes, or NIL if we
+ ;; should just let the SOURCE-NAME fall through
+ ;;
+ ;; Unlike the SOURCE-NAME slot, this slot's value should never
+ ;; affect ordinary code behavior, only debugging/diagnostic behavior.
+ ;;
+ ;; Ha. Ah, the starry-eyed idealism of the writer of the above
+ ;; paragraph. FUNCTION-LAMBDA-EXPRESSION's behaviour, as of
+ ;; sbcl-0.7.11.x, differs if the name of the a function is a string
+ ;; or not, as if it is a valid function name then it can look for an
+ ;; inline expansion.
;;
- ;; Nil
- ;; An ordinary function, callable using local call.
+ ;; The value of this slot can be anything, except that it shouldn't
+ ;; be a legal function name, since otherwise debugging gets
+ ;; confusing. (If a legal function name is a good name for the
+ ;; function, it should be in %SOURCE-NAME, and then we shouldn't
+ ;; need a %DEBUG-NAME.) In SBCL as of 0.pre7.87, it's always a
+ ;; string unless it's NIL, since that's how CMU CL represented debug
+ ;; names. However, eventually I (WHN) think it we should start using
+ ;; list values instead, since they have much nicer print properties
+ ;; (abbreviation, skipping package prefixes when unneeded, and
+ ;; renaming package prefixes when we do things like renaming SB!EXT
+ ;; to SB-EXT).
;;
- ;; :Let
- ;; A lambda that is used in only one local call, and has in effect
- ;; been substituted directly inline. The return node is deleted, and
- ;; the result is computed with the actual result continuation for the
- ;; call.
+ ;; E.g. for the function which implements (DEFUN FOO ...), we could
+ ;; have
+ ;; %SOURCE-NAME=FOO
+ ;; %DEBUG-NAME=NIL
+ ;; for the function which implements the top level form
+ ;; (IN-PACKAGE :FOO) we could have
+ ;; %SOURCE-NAME=NIL
+ ;; %DEBUG-NAME="top level form (IN-PACKAGE :FOO)"
+ ;; for the function which implements FOO in
+ ;; (DEFUN BAR (...) (FLET ((FOO (...) ...)) ...))
+ ;; we could have
+ ;; %SOURCE-NAME=FOO
+ ;; %DEBUG-NAME="FLET FOO in BAR"
+ ;; and for the function which implements FOO in
+ ;; (DEFMACRO FOO (...) ...)
+ ;; we could have
+ ;; %SOURCE-NAME=FOO (or maybe .ANONYMOUS.?)
+ ;; %DEBUG-NAME="DEFMACRO FOO"
+ (%debug-name nil
+ :type (or null (not (satisfies legal-fun-name-p)))
+ :read-only t)
+ ;; some information about how this function is used. These values
+ ;; are meaningful:
;;
- ;; :MV-Let
- ;; Similar to :Let, but the call is an MV-Call.
+ ;; NIL
+ ;; an ordinary function, callable using local call
;;
- ;; :Assignment
- ;; Similar to a let, but can have other than one call as long as there
- ;; is at most one non-tail call.
+ ;; :LET
+ ;; a lambda that is used in only one local call, and has in
+ ;; effect been substituted directly inline. The return node is
+ ;; deleted, and the result is computed with the actual result
+ ;; lvar for the call.
;;
- ;; :Optional
- ;; A lambda that is an entry-point for an optional-dispatch. Similar
- ;; to NIL, but requires greater caution, since local call analysis may
- ;; create new references to this function. Also, the function cannot
- ;; be deleted even if it has *no* references. The Optional-Dispatch
- ;; is in the LAMDBA-OPTIONAL-DISPATCH.
+ ;; :MV-LET
+ ;; Similar to :LET (as per FUNCTIONAL-LETLIKE-P), but the call
+ ;; is an MV-CALL.
;;
- ;; :External
- ;; An external entry point lambda. The function it is an entry for is
- ;; in the Entry-Function.
+ ;; :ASSIGNMENT
+ ;; similar to a LET (as per FUNCTIONAL-SOMEWHAT-LETLIKE-P), but
+ ;; can have other than one call as long as there is at most
+ ;; one non-tail call.
;;
- ;; :Top-Level
- ;; A top-level lambda, holding a compiled top-level form. Compiled
- ;; very much like NIL, but provides an indication of top-level
- ;; context. A top-level lambda should have *no* references. Its
- ;; Entry-Function is a self-pointer.
+ ;; :OPTIONAL
+ ;; a lambda that is an entry point for an OPTIONAL-DISPATCH.
+ ;; Similar to NIL, but requires greater caution, since local call
+ ;; analysis may create new references to this function. Also, the
+ ;; function cannot be deleted even if it has *no* references. The
+ ;; OPTIONAL-DISPATCH is in the LAMDBA-OPTIONAL-DISPATCH.
;;
- ;; :Top-Level-XEP
- ;; After a component is compiled, we clobber any top-level code
- ;; references to its non-closure XEPs with dummy FUNCTIONAL structures
- ;; having this kind. This prevents the retained top-level code from
- ;; holding onto the IR for the code it references.
+ ;; :EXTERNAL
+ ;; an external entry point lambda. The function it is an entry
+ ;; for is in the ENTRY-FUN slot.
;;
- ;; :Escape
- ;; :Cleanup
- ;; Special functions used internally by Catch and Unwind-Protect.
- ;; These are pretty much like a normal function (NIL), but are treated
- ;; specially by local call analysis and stuff. Neither kind should
- ;; ever be given an XEP even though they appear as args to funny
- ;; functions. An :Escape function is never actually called, and thus
- ;; doesn't need to have code generated for it.
+ ;; :TOPLEVEL
+ ;; a top level lambda, holding a compiled top level form.
+ ;; Compiled very much like NIL, but provides an indication of
+ ;; top level context. A :TOPLEVEL lambda should have *no*
+ ;; references. Its ENTRY-FUN is a self-pointer.
;;
- ;; :Deleted
+ ;; :TOPLEVEL-XEP
+ ;; After a component is compiled, we clobber any top level code
+ ;; references to its non-closure XEPs with dummy FUNCTIONAL
+ ;; structures having this kind. This prevents the retained
+ ;; top level code from holding onto the IR for the code it
+ ;; references.
+ ;;
+ ;; :ESCAPE
+ ;; :CLEANUP
+ ;; special functions used internally by CATCH and UNWIND-PROTECT.
+ ;; These are pretty much like a normal function (NIL), but are
+ ;; treated specially by local call analysis and stuff. Neither
+ ;; kind should ever be given an XEP even though they appear as
+ ;; args to funny functions. An :ESCAPE function is never actually
+ ;; called, and thus doesn't need to have code generated for it.
+ ;;
+ ;; :DELETED
;; This function has been found to be uncallable, and has been
;; marked for deletion.
- (kind nil :type (member nil :optional :deleted :external :top-level :escape
- :cleanup :let :mv-let :assignment
- :top-level-xep))
+ (kind nil :type (member nil :optional :deleted :external :toplevel
+ :escape :cleanup :let :mv-let :assignment
+ :toplevel-xep))
+ ;; Is this a function that some external entity (e.g. the fasl dumper)
+ ;; refers to, so that even when it appears to have no references, it
+ ;; shouldn't be deleted? In the old days (before
+ ;; sbcl-0.pre7.37.flaky5.2) this was sort of implicitly true when
+ ;; KIND was :TOPLEVEL. Now it must be set explicitly, both for
+ ;; :TOPLEVEL functions and for any other kind of functions that we
+ ;; want to dump or return from #'CL:COMPILE or whatever.
+ (has-external-references-p nil)
;; In a normal function, this is the external entry point (XEP)
;; lambda for this function, if any. Each function that is used
;; other than in a local call has an XEP, and all of the
;; non-local-call references are replaced with references to the
;; XEP.
;;
- ;; In an XEP lambda (indicated by the :External kind), this is the
+ ;; In an XEP lambda (indicated by the :EXTERNAL kind), this is the
;; function that the XEP is an entry-point for. The body contains
;; local calls to all the actual entry points in the function. In a
- ;; :Top-Level lambda (which is its own XEP) this is a self-pointer.
+ ;; :TOPLEVEL lambda (which is its own XEP) this is a self-pointer.
;;
;; With all other kinds, this is null.
- (entry-function nil :type (or functional null))
- ;; The value of any inline/notinline declaration for a local function.
+ (entry-fun nil :type (or functional null))
+ ;; the value of any inline/notinline declaration for a local
+ ;; function (or NIL in any case if no inline expansion is available)
(inlinep nil :type inlinep)
- ;; If we have a lambda that can be used as in inline expansion for this
- ;; function, then this is it. If there is no source-level lambda
- ;; corresponding to this function then this is Null (but then INLINEP will
- ;; always be NIL as well.)
+ ;; If we have a lambda that can be used as in inline expansion for
+ ;; this function, then this is it. If there is no source-level
+ ;; lambda corresponding to this function then this is null (but then
+ ;; INLINEP will always be NIL as well.)
(inline-expansion nil :type list)
- ;; The lexical environment that the inline-expansion should be converted in.
+ ;; the lexical environment that the INLINE-EXPANSION should be converted in
(lexenv *lexenv* :type lexenv)
- ;; The original function or macro lambda list, or :UNSPECIFIED if this is a
- ;; compiler created function.
+ ;; the original function or macro lambda list, or :UNSPECIFIED if
+ ;; this is a compiler created function
(arg-documentation nil :type (or list (member :unspecified)))
- ;; Various rare miscellaneous info that drives code generation & stuff.
+ ;; various rare miscellaneous info that drives code generation & stuff
(plist () :type list))
-(defprinter (functional)
- name)
+(defprinter (functional :identity t)
+ %source-name
+ %debug-name
+ #!+sb-show id)
+
+;;; Is FUNCTIONAL LET-converted? (where we're indifferent to whether
+;;; it returns one value or multiple values)
+(defun functional-letlike-p (functional)
+ (member (functional-kind functional)
+ '(:let :mv-let)))
+
+;;; Is FUNCTIONAL sorta LET-converted? (where even an :ASSIGNMENT counts)
+;;;
+;;; FIXME: I (WHN) don't understand this one well enough to give a good
+;;; definition or even a good function name, it's just a literal copy
+;;; of a CMU CL idiom. Does anyone have a better name or explanation?
+(defun functional-somewhat-letlike-p (functional)
+ (or (functional-letlike-p functional)
+ (eql (functional-kind functional) :assignment)))
+
+;;; FUNCTIONAL name operations
+(defun functional-debug-name (functional)
+ ;; FUNCTIONAL-%DEBUG-NAME takes precedence over FUNCTIONAL-SOURCE-NAME
+ ;; here because we want different debug names for the functions in
+ ;; DEFUN FOO and FLET FOO even though they have the same source name.
+ (or (functional-%debug-name functional)
+ ;; Note that this will cause an error if the function is
+ ;; anonymous. In SBCL (as opposed to CMU CL) we make all
+ ;; FUNCTIONALs have debug names. The CMU CL code didn't bother
+ ;; in many FUNCTIONALs, especially those which were likely to be
+ ;; optimized away before the user saw them. However, getting
+ ;; that right requires a global understanding of the code,
+ ;; which seems bad, so we just require names for everything.
+ (leaf-source-name functional)))
-;;; The Lambda only deals with required lexical arguments. Special,
+;;; The CLAMBDA only deals with required lexical arguments. Special,
;;; optional, keyword and rest arguments are handled by transforming
;;; into simpler stuff.
(def!struct (clambda (:include functional)
(:predicate lambda-p)
(:constructor make-lambda)
(:copier copy-lambda))
- ;; List of lambda-var descriptors for args.
- (vars nil :type list)
+ ;; list of LAMBDA-VAR descriptors for arguments
+ (vars nil :type list :read-only t)
;; If this function was ever a :OPTIONAL function (an entry-point
- ;; for an optional-dispatch), then this is that optional-dispatch.
+ ;; for an OPTIONAL-DISPATCH), then this is that OPTIONAL-DISPATCH.
;; The optional dispatch will be :DELETED if this function is no
;; longer :OPTIONAL.
(optional-dispatch nil :type (or optional-dispatch null))
- ;; The Bind node for this Lambda. This node marks the beginning of
+ ;; the BIND node for this LAMBDA. This node marks the beginning of
;; the lambda, and serves to explicitly represent the lambda binding
- ;; semantics within the flow graph representation. Null in deleted
- ;; functions, and also in LETs where we deleted the call & bind
- ;; (because there are no variables left), but have not yet actually
- ;; deleted the lambda yet.
+ ;; semantics within the flow graph representation. This is null in
+ ;; deleted functions, and also in LETs where we deleted the call and
+ ;; bind (because there are no variables left), but have not yet
+ ;; actually deleted the LAMBDA yet.
(bind nil :type (or bind null))
- ;; The Return node for this Lambda, or NIL if it has been deleted.
- ;; This marks the end of the lambda, receiving the result of the
- ;; body. In a let, the return node is deleted, and the body delivers
- ;; the value to the actual continuation. The return may also be
+ ;; the RETURN node for this LAMBDA, or NIL if it has been
+ ;; deleted. This marks the end of the lambda, receiving the result
+ ;; of the body. In a LET, the return node is deleted, and the body
+ ;; delivers the value to the actual lvar. The return may also be
;; deleted if it is unreachable.
(return nil :type (or creturn null))
- ;; If this is a let, then the Lambda whose Lets list we are in,
- ;; otherwise this is a self-pointer.
+ ;; If this CLAMBDA is a LET, then this slot holds the LAMBDA whose
+ ;; LETS list we are in, otherwise it is a self-pointer.
(home nil :type (or clambda null))
- ;; A list of all the all the lambdas that have been let-substituted
- ;; in this lambda. This is only non-null in lambdas that aren't
- ;; lets.
- (lets () :type list)
- ;; A list of all the Entry nodes in this function and its lets. Null
- ;; an a let.
- (entries () :type list)
- ;; A list of all the functions directly called from this function
- ;; (or one of its lets) using a non-let local call. May include
- ;; deleted functions because nobody bothers to clear them out.
- (calls () :type list)
- ;; The Tail-Set that this lambda is in. Null during creation and in
- ;; let lambdas.
+ ;; all the lambdas that have been LET-substituted in this lambda.
+ ;; This is only non-null in lambdas that aren't LETs.
+ (lets nil :type list)
+ ;; all the ENTRY nodes in this function and its LETs, or null in a LET
+ (entries nil :type list)
+ ;; CLAMBDAs which are locally called by this lambda, and other
+ ;; objects (closed-over LAMBDA-VARs and XEPs) which this lambda
+ ;; depends on in such a way that DFO shouldn't put them in separate
+ ;; components.
+ (calls-or-closes nil :type list)
+ ;; the TAIL-SET that this LAMBDA is in. This is null during creation.
+ ;;
+ ;; In CMU CL, and old SBCL, this was also NILed out when LET
+ ;; conversion happened. That caused some problems, so as of
+ ;; sbcl-0.pre7.37.flaky5.2 when I was trying to get the compiler to
+ ;; emit :EXTERNAL functions directly, and so now the value
+ ;; is no longer NILed out in LET conversion, but instead copied
+ ;; (so that any further optimizations on the rest of the tail
+ ;; set won't modify the value) if necessary.
(tail-set nil :type (or tail-set null))
- ;; The structure which represents the environment that this
- ;; Function's variables are allocated in. This is filled in by
- ;; environment analysis. In a let, this is EQ to our home's
- ;; environment.
- (environment nil :type (or environment null))
+ ;; the structure which represents the phsical environment that this
+ ;; function's variables are allocated in. This is filled in by
+ ;; physical environment analysis. In a LET, this is EQ to our home's
+ ;; physical environment.
+ (physenv nil :type (or physenv null))
;; In a LET, this is the NODE-LEXENV of the combination node. We
- ;; retain it so that if the let is deleted (due to a lack of vars),
+ ;; retain it so that if the LET is deleted (due to a lack of vars),
;; we will still have caller's lexenv to figure out which cleanup is
;; in effect.
(call-lexenv nil :type (or lexenv null)))
-(defprinter (clambda :conc-name lambda-)
- name
+(defprinter (clambda :conc-name lambda- :identity t)
+ %source-name
+ %debug-name
+ #!+sb-show id
(type :test (not (eq type *universal-type*)))
(where-from :test (not (eq where-from :assumed)))
- (vars :prin1 (mapcar #'leaf-name vars)))
+ (vars :prin1 (mapcar #'leaf-source-name vars)))
-;;; The Optional-Dispatch leaf is used to represent hairy lambdas. It
-;;; is a Functional, like Lambda. Each legal number of arguments has a
+;;; The OPTIONAL-DISPATCH leaf is used to represent hairy lambdas. It
+;;; is a FUNCTIONAL, like LAMBDA. Each legal number of arguments has a
;;; function which is called when that number of arguments is passed.
;;; The function is called with all the arguments actually passed. If
-;;; additional arguments are legal, then the LEXPR style More-Entry
+;;; additional arguments are legal, then the LEXPR style MORE-ENTRY
;;; handles them. The value returned by the function is the value
-;;; which results from calling the Optional-Dispatch.
+;;; which results from calling the OPTIONAL-DISPATCH.
;;;
;;; The theory is that each entry-point function calls the next entry
;;; point tail-recursively, passing all the arguments passed in and
;;; the default for the argument the entry point is for. The last
;;; entry point calls the real body of the function. In the presence
-;;; of supplied-p args and other hair, things are more complicated. In
+;;; of SUPPLIED-P args and other hair, things are more complicated. In
;;; general, there is a distinct internal function that takes the
-;;; supplied-p args as parameters. The preceding entry point calls
-;;; this function with NIL filled in for the supplied-p args, while
-;;; the current entry point calls it with T in the supplied-p
+;;; SUPPLIED-P args as parameters. The preceding entry point calls
+;;; this function with NIL filled in for the SUPPLIED-P args, while
+;;; the current entry point calls it with T in the SUPPLIED-P
;;; positions.
;;;
;;; Note that it is easy to turn a call with a known number of
;;; function, so functions that are compiled together can avoid doing
;;; the dispatch.
(def!struct (optional-dispatch (:include functional))
- ;; The original parsed argument list, for anyone who cares.
+ ;; the original parsed argument list, for anyone who cares
(arglist nil :type list)
- ;; True if &ALLOW-OTHER-KEYS was supplied.
+ ;; true if &ALLOW-OTHER-KEYS was supplied
(allowp nil :type boolean)
- ;; True if &KEY was specified. (Doesn't necessarily mean that there
- ;; are any keyword arguments...)
+ ;; true if &KEY was specified (which doesn't necessarily mean that
+ ;; there are any &KEY arguments..)
(keyp nil :type boolean)
- ;; The number of required arguments. This is the smallest legal
+ ;; the number of required arguments. This is the smallest legal
;; number of arguments.
(min-args 0 :type unsigned-byte)
- ;; The total number of required and optional arguments. Args at
- ;; positions >= to this are rest, key or illegal args.
+ ;; the total number of required and optional arguments. Args at
+ ;; positions >= to this are &REST, &KEY or illegal args.
(max-args 0 :type unsigned-byte)
- ;; List of the Lambdas which are the entry points for non-rest,
- ;; non-key calls. The entry for Min-Args is first, Min-Args+1
- ;; second, ... Max-Args last. The last entry-point always calls the
- ;; main entry; in simple cases it may be the main entry.
+ ;; list of the (maybe delayed) LAMBDAs which are the entry points
+ ;; for non-rest, non-key calls. The entry for MIN-ARGS is first,
+ ;; MIN-ARGS+1 second, ... MAX-ARGS last. The last entry-point always
+ ;; calls the main entry; in simple cases it may be the main entry.
(entry-points nil :type list)
- ;; An entry point which takes Max-Args fixed arguments followed by
+ ;; an entry point which takes MAX-ARGS fixed arguments followed by
;; an argument context pointer and an argument count. This entry
;; point deals with listifying rest args and parsing keywords. This
;; is null when extra arguments aren't legal.
(more-entry nil :type (or clambda null))
- ;; The main entry-point into the function, which takes all arguments
+ ;; the main entry-point into the function, which takes all arguments
;; including keywords as fixed arguments. The format of the
;; arguments must be determined by examining the arglist. This may
- ;; be used by callers that supply at least Max-Args arguments and
+ ;; be used by callers that supply at least MAX-ARGS arguments and
;; know what they are doing.
(main-entry nil :type (or clambda null)))
-(defprinter (optional-dispatch)
- name
+(defprinter (optional-dispatch :identity t)
+ %source-name
+ %debug-name
+ #!+sb-show id
(type :test (not (eq type *universal-type*)))
(where-from :test (not (eq where-from :assumed)))
arglist
(more-entry :test more-entry)
main-entry)
-;;; The Arg-Info structure allows us to tack various information onto
-;;; Lambda-Vars during IR1 conversion. If we use one of these things,
+;;; The ARG-INFO structure allows us to tack various information onto
+;;; LAMBDA-VARs during IR1 conversion. If we use one of these things,
;;; then the var will have to be massaged a bit before it is simple
;;; and lexical.
(def!struct arg-info
- ;; True if this arg is to be specially bound.
+ ;; true if this arg is to be specially bound
(specialp nil :type boolean)
- ;; The kind of argument being described. Required args only have arg
+ ;; the kind of argument being described. Required args only have arg
;; info structures if they are special.
- (kind (required-argument) :type (member :required :optional :keyword :rest
- :more-context :more-count))
- ;; If true, the Var for supplied-p variable of a keyword or optional
- ;; arg. This is true for keywords with non-constant defaults even
- ;; when there is no user-specified supplied-p var.
+ (kind (missing-arg)
+ :type (member :required :optional :keyword :rest
+ :more-context :more-count))
+ ;; If true, this is the VAR for SUPPLIED-P variable of a keyword or
+ ;; optional arg. This is true for keywords with non-constant
+ ;; defaults even when there is no user-specified supplied-p var.
(supplied-p nil :type (or lambda-var null))
- ;; The default for a keyword or optional, represented as the
- ;; original Lisp code. This is set to NIL in keyword arguments that
- ;; are defaulted using the supplied-p arg.
+ ;; the default for a keyword or optional, represented as the
+ ;; original Lisp code. This is set to NIL in &KEY arguments that are
+ ;; defaulted using the SUPPLIED-P arg.
(default nil :type t)
- ;; The actual keyword for a keyword argument.
- (keyword nil :type (or keyword null)))
-(defprinter (arg-info)
+ ;; the actual key for a &KEY argument. Note that in ANSI CL this is
+ ;; not necessarily a keyword: (DEFUN FOO (&KEY ((BAR BAR))) ...).
+ (key nil :type symbol))
+(defprinter (arg-info :identity t)
(specialp :test specialp)
kind
(supplied-p :test supplied-p)
(default :test default)
- (keyword :test keyword))
+ (key :test key))
-;;; The Lambda-Var structure represents a lexical lambda variable.
+;;; The LAMBDA-VAR structure represents a lexical lambda variable.
;;; This structure is also used during IR1 conversion to describe
;;; lambda arguments which may ultimately turn out not to be simple
;;; and lexical.
;;;
-;;; Lambda-Vars with no Refs are considered to be deleted; environment
-;;; analysis isn't done on these variables, so the back end must check
-;;; for and ignore unreferenced variables. Note that a deleted
-;;; lambda-var may have sets; in this case the back end is still
-;;; responsible for propagating the Set-Value to the set's Cont.
+;;; LAMBDA-VARs with no REFs are considered to be deleted; physical
+;;; environment analysis isn't done on these variables, so the back
+;;; end must check for and ignore unreferenced variables. Note that a
+;;; deleted LAMBDA-VAR may have sets; in this case the back end is
+;;; still responsible for propagating the SET-VALUE to the set's CONT.
+(!def-boolean-attribute lambda-var
+ ;; true if this variable has been declared IGNORE
+ ignore
+ ;; This is set by physical environment analysis if it chooses an
+ ;; indirect (value cell) representation for this variable because it
+ ;; is both set and closed over.
+ indirect)
+
(def!struct (lambda-var (:include basic-var))
- ;; True if this variable has been declared Ignore.
- (ignorep nil :type boolean)
- ;; The Lambda that this var belongs to. This may be null when we are
+ (flags (lambda-var-attributes)
+ :type attributes)
+ ;; the CLAMBDA that this var belongs to. This may be null when we are
;; building a lambda during IR1 conversion.
(home nil :type (or null clambda))
- ;; This is set by environment analysis if it chooses an indirect
- ;; (value cell) representation for this variable because it is both
- ;; set and closed over.
- (indirect nil :type boolean)
;; The following two slots are only meaningful during IR1 conversion
;; of hairy lambda vars:
;;
- ;; The Arg-Info structure which holds information obtained from
+ ;; The ARG-INFO structure which holds information obtained from
;; &keyword parsing.
(arg-info nil :type (or arg-info null))
- ;; If true, the Global-Var structure for the special variable which
- ;; is to be bound to the value of this argument.
+ ;; if true, the GLOBAL-VAR structure for the special variable which
+ ;; is to be bound to the value of this argument
(specvar nil :type (or global-var null))
;; Set of the CONSTRAINTs on this variable. Used by constraint
;; propagation. This is left null by the lambda pre-pass if it
;; determine that this is a set closure variable, and is thus not a
;; good subject for flow analysis.
(constraints nil :type (or sset null)))
-(defprinter (lambda-var)
- name
+(defprinter (lambda-var :identity t)
+ %source-name
+ #!+sb-show id
(type :test (not (eq type *universal-type*)))
(where-from :test (not (eq where-from :assumed)))
- (ignorep :test ignorep)
+ (flags :test (not (zerop flags))
+ :prin1 (decode-lambda-var-attributes flags))
(arg-info :test arg-info)
(specvar :test specvar))
+
+(defmacro lambda-var-ignorep (var)
+ `(lambda-var-attributep (lambda-var-flags ,var) ignore))
+(defmacro lambda-var-indirect (var)
+ `(lambda-var-attributep (lambda-var-flags ,var) indirect))
\f
;;;; basic node types
-;;; A Ref represents a reference to a leaf. Ref-Reoptimize is
-;;; initially (and forever) NIL, since Refs don't receive any values
+;;; A REF represents a reference to a LEAF. REF-REOPTIMIZE is
+;;; initially (and forever) NIL, since REFs don't receive any values
;;; and don't have any IR1 optimizer.
-(defstruct (ref (:include node (:reoptimize nil))
- (:constructor make-ref (derived-type leaf)))
+(defstruct (ref (:include valued-node (reoptimize nil))
+ (:constructor make-ref
+ (leaf
+ &aux (leaf-type (leaf-type leaf))
+ (derived-type
+ (make-single-value-type leaf-type))))
+ (:copier nil))
;; The leaf referenced.
(leaf nil :type leaf))
-(defprinter (ref)
+(defprinter (ref :identity t)
+ #!+sb-show id
leaf)
;;; Naturally, the IF node always appears at the end of a block.
-;;; Node-Cont is a dummy continuation, and is there only to keep
-;;; people happy.
(defstruct (cif (:include node)
(:conc-name if-)
(:predicate if-p)
(:constructor make-if)
(:copier copy-if))
- ;; Continuation for the predicate.
- (test (required-argument) :type continuation)
- ;; The blocks that we execute next in true and false case,
- ;; respectively (may be the same.)
- (consequent (required-argument) :type cblock)
- (alternative (required-argument) :type cblock))
-(defprinter (cif :conc-name if-)
- (test :prin1 (continuation-use test))
+ ;; LVAR for the predicate
+ (test (missing-arg) :type lvar)
+ ;; the blocks that we execute next in true and false case,
+ ;; respectively (may be the same)
+ (consequent (missing-arg) :type cblock)
+ (alternative (missing-arg) :type cblock))
+(defprinter (cif :conc-name if- :identity t)
+ (test :prin1 (lvar-uses test))
consequent
alternative)
-(defstruct (cset (:include node
- (derived-type *universal-type*))
+(defstruct (cset (:include valued-node
+ (derived-type (make-single-value-type
+ *universal-type*)))
(:conc-name set-)
(:predicate set-p)
(:constructor make-set)
(:copier copy-set))
- ;; Descriptor for the variable set.
- (var (required-argument) :type basic-var)
- ;; Continuation for the value form.
- (value (required-argument) :type continuation))
-(defprinter (cset :conc-name set-)
+ ;; descriptor for the variable set
+ (var (missing-arg) :type basic-var)
+ ;; LVAR for the value form
+ (value (missing-arg) :type lvar))
+(defprinter (cset :conc-name set- :identity t)
var
- (value :prin1 (continuation-use value)))
+ (value :prin1 (lvar-uses value)))
-;;; The Basic-Combination structure is used to represent both normal
-;;; and multiple value combinations. In a local function call, this
+;;; The BASIC-COMBINATION structure is used to represent both normal
+;;; and multiple value combinations. In a let-like function call, this
;;; node appears at the end of its block and the body of the called
-;;; function appears as the successor. The NODE-CONT remains the
-;;; continuation which receives the value of the call.
-(defstruct (basic-combination (:include node)
- (:constructor nil))
- ;; Continuation for the function.
- (fun (required-argument) :type continuation)
- ;; List of continuations for the args. In a local call, an argument
- ;; continuation may be replaced with NIL to indicate that the
- ;; corresponding variable is unreferenced, and thus no argument
- ;; value need be passed.
+;;; function appears as the successor; the NODE-LVAR is null.
+(defstruct (basic-combination (:include valued-node)
+ (:constructor nil)
+ (:copier nil))
+ ;; LVAR for the function
+ (fun (missing-arg) :type lvar)
+ ;; list of LVARs for the args. In a local call, an argument lvar may
+ ;; be replaced with NIL to indicate that the corresponding variable
+ ;; is unreferenced, and thus no argument value need be passed.
(args nil :type list)
- ;; The kind of function call being made. :LOCAL means that this is a
+ ;; the kind of function call being made. :LOCAL means that this is a
;; local call to a function in the same component, and that argument
;; syntax checking has been done, etc. Calls to known global
- ;; functions are represented by storing the FUNCTION-INFO for the
+ ;; functions are represented by storing the FUN-INFO for the
;; function in this slot. :FULL is a call to an (as yet) unknown
;; function. :ERROR is like :FULL, but means that we have discovered
;; that the call contains an error, and should not be reconsidered
;; for optimization.
- (kind :full :type (or (member :local :full :error) function-info))
- ;; Some kind of information attached to this node by the back end.
+ (kind :full :type (or (member :local :full :error) fun-info))
+ ;; some kind of information attached to this node by the back end
(info nil))
;;; The COMBINATION node represents all normal function calls,
;;; including FUNCALL. This is distinct from BASIC-COMBINATION so that
;;; an MV-COMBINATION isn't COMBINATION-P.
(defstruct (combination (:include basic-combination)
- (:constructor make-combination (fun))))
-(defprinter (combination)
- (fun :prin1 (continuation-use fun))
- (args :prin1 (mapcar #'(lambda (x)
- (if x
- (continuation-use x)
- "<deleted>"))
+ (:constructor make-combination (fun))
+ (:copier nil)))
+(defprinter (combination :identity t)
+ #!+sb-show id
+ (fun :prin1 (lvar-uses fun))
+ (args :prin1 (mapcar (lambda (x)
+ (if x
+ (lvar-uses x)
+ "<deleted>"))
args)))
-;;; An MV-Combination is to Multiple-Value-Call as a Combination is to
-;;; Funcall. This is used to implement all the multiple-value
+(defun call-full-like-p (call)
+ (declare (type combination call))
+ (let ((kind (basic-combination-kind call)))
+ (or (eq kind :full)
+ (and (fun-info-p kind)
+ (null (fun-info-templates kind))
+ (not (fun-info-ir2-convert kind))))))
+
+;;; An MV-COMBINATION is to MULTIPLE-VALUE-CALL as a COMBINATION is to
+;;; FUNCALL. This is used to implement all the multiple-value
;;; receiving forms.
(defstruct (mv-combination (:include basic-combination)
- (:constructor make-mv-combination (fun))))
+ (:constructor make-mv-combination (fun))
+ (:copier nil)))
(defprinter (mv-combination)
- (fun :prin1 (continuation-use fun))
- (args :prin1 (mapcar #'continuation-use args)))
+ (fun :prin1 (lvar-uses fun))
+ (args :prin1 (mapcar #'lvar-uses args)))
-;;; The Bind node marks the beginning of a lambda body and represents
+;;; The BIND node marks the beginning of a lambda body and represents
;;; the creation and initialization of the variables.
-(defstruct (bind (:include node))
- ;; The lambda we are binding variables for. Null when we are
- ;; creating the Lambda during IR1 translation.
+(defstruct (bind (:include node)
+ (:copier nil))
+ ;; the lambda we are binding variables for. Null when we are
+ ;; creating the LAMBDA during IR1 translation.
(lambda nil :type (or clambda null)))
(defprinter (bind)
lambda)
-;;; The Return node marks the end of a lambda body. It collects the
+;;; The RETURN node marks the end of a lambda body. It collects the
;;; return values and represents the control transfer on return. This
-;;; is also where we stick information used for Tail-Set type
+;;; is also where we stick information used for TAIL-SET type
;;; inference.
(defstruct (creturn (:include node)
(:conc-name return-)
(:predicate return-p)
(:constructor make-return)
(:copier copy-return))
- ;; The lambda we are returning from. Null temporarily during
+ ;; the lambda we are returning from. Null temporarily during
;; ir1tran.
(lambda nil :type (or clambda null))
- ;; The continuation which yields the value of the lambda.
- (result (required-argument) :type continuation)
- ;; The union of the node-derived-type of all uses of the result
+ ;; the lvar which yields the value of the lambda
+ (result (missing-arg) :type lvar)
+ ;; the union of the node-derived-type of all uses of the result
;; other than by a local call, intersected with the result's
;; asserted-type. If there are no non-call uses, this is
- ;; *empty-type*.
+ ;; *EMPTY-TYPE*
(result-type *wild-type* :type ctype))
-(defprinter (creturn :conc-name return-)
+(defprinter (creturn :conc-name return- :identity t)
lambda
result-type)
+
+;;; The CAST node represents type assertions. The check for
+;;; TYPE-TO-CHECK is performed and then the VALUE is declared to be of
+;;; type ASSERTED-TYPE.
+(defstruct (cast (:include valued-node)
+ (:constructor %make-cast))
+ (asserted-type (missing-arg) :type ctype)
+ (type-to-check (missing-arg) :type ctype)
+ ;; an indication of what we have proven about how this type
+ ;; assertion is satisfied:
+ ;;
+ ;; NIL
+ ;; No type check is necessary (VALUE type is a subtype of the TYPE-TO-CHECK.)
+ ;;
+ ;; T
+ ;; A type check is needed.
+ (%type-check t :type (member t nil))
+ ;; the lvar which is checked
+ (value (missing-arg) :type lvar))
+(defprinter (cast :identity t)
+ %type-check
+ value
+ asserted-type
+ type-to-check)
\f
;;;; non-local exit support
;;;;
;;;; In IR1, we insert special nodes to mark potentially non-local
;;;; lexical exits.
-;;; The Entry node serves to mark the start of the dynamic extent of a
-;;; lexical exit. It is the mess-up node for the corresponding :Entry
+;;; The ENTRY node serves to mark the start of the dynamic extent of a
+;;; lexical exit. It is the mess-up node for the corresponding :ENTRY
;;; cleanup.
-(defstruct (entry (:include node))
- ;; All of the Exit nodes for potential non-local exits to this point.
+(defstruct (entry (:include node)
+ (:copier nil))
+ ;; All of the EXIT nodes for potential non-local exits to this point.
(exits nil :type list)
- ;; The cleanup for this entry. Null only temporarily.
+ ;; The cleanup for this entry. NULL only temporarily.
(cleanup nil :type (or cleanup null)))
-(defprinter (entry))
+(defprinter (entry :identity t)
+ #!+sb-show id)
-;;; The Exit node marks the place at which exit code would be emitted,
+;;; The EXIT node marks the place at which exit code would be emitted,
;;; if necessary. This is interposed between the uses of the exit
;;; continuation and the exit continuation's DEST. Instead of using
;;; the returned value being delivered directly to the exit
-;;; continuation, it is delivered to our Value continuation. The
-;;; original exit continuation is the exit node's CONT.
-(defstruct (exit (:include node))
- ;; The Entry node that this is an exit for. If null, this is a
+;;; continuation, it is delivered to our VALUE lvar. The original exit
+;;; lvar is the exit node's LVAR.
+(defstruct (exit (:include valued-node)
+ (:copier nil))
+ ;; the ENTRY node that this is an exit for. If null, this is a
;; degenerate exit. A degenerate exit is used to "fill" an empty
;; block (which isn't allowed in IR1.) In a degenerate exit, Value
;; is always also null.
(entry nil :type (or entry null))
- ;; The continuation yeilding the value we are to exit with. If NIL,
- ;; then no value is desired (as in GO).
- (value nil :type (or continuation null)))
-(defprinter (exit)
+ ;; the lvar yielding the value we are to exit with. If NIL, then no
+ ;; value is desired (as in GO).
+ (value nil :type (or lvar null)))
+(defprinter (exit :identity t)
+ #!+sb-show id
(entry :test entry)
(value :test value))
\f
#-no-ansi-print-object
(:print-object (lambda (x s)
(print-unreadable-object (x s :type t)
- (prin1 (undefined-warning-name x) s)))))
- ;; The name of the unknown thing.
+ (prin1 (undefined-warning-name x) s))))
+ (:copier nil))
+ ;; the name of the unknown thing
(name nil :type (or symbol list))
- ;; The kind of reference to Name.
- (kind (required-argument) :type (member :function :type :variable))
- ;; The number of times this thing was used.
+ ;; the kind of reference to NAME
+ (kind (missing-arg) :type (member :function :type :variable))
+ ;; the number of times this thing was used
(count 0 :type unsigned-byte)
- ;; A list of COMPILER-ERROR-CONTEXT structures describing places
+ ;; a list of COMPILER-ERROR-CONTEXT structures describing places
;; where this thing was used. Note that we only record the first
;; *UNDEFINED-WARNING-LIMIT* calls.
(warnings () :type list))
\f
+;;; a helper for the POLICY macro, defined late here so that the
+;;; various type tests can be inlined
+(declaim (ftype (function ((or list lexenv node functional)) list)
+ %coerce-to-policy))
+(defun %coerce-to-policy (thing)
+ (let ((result (etypecase thing
+ (list thing)
+ (lexenv (lexenv-policy thing))
+ (node (lexenv-policy (node-lexenv thing)))
+ (functional (lexenv-policy (functional-lexenv thing))))))
+ ;; Test the first element of the list as a rudimentary sanity
+ ;; that it really does look like a valid policy.
+ (aver (or (null result) (policy-quality-name-p (caar result))))
+ ;; Voila.
+ result))
+\f
;;;; Freeze some structure types to speed type testing.
#!-sb-fluid
-(declaim (freeze-type node leaf lexenv continuation cblock component cleanup
- environment tail-set nlx-info))
+(declaim (freeze-type node leaf lexenv ctran lvar cblock component cleanup
+ physenv tail-set nlx-info))