* for this instruction in the SIGILL handler and if we see it, we
* advance the EIP by two bytes to skip over ud2 instruction and
* call sigtrap_handler. */
-#if defined(LISP_FEATURE_DARWIN)
+#if defined(LISP_FEATURE_UD2_BREAKPOINTS)
#define END()
#define TRAP ud2
#else
fstp %st(0)
fstp %st(0)
- cld # clear out DF: Darwin, Solaris and Win32 at
- # least need this, and it should not hurt others
-
call *%eax # normal callout using Lisp stack
movl %eax,%ecx # remember integer return value
/* Check for a return FP value. */
fxam
- fnstsw %eax
+ fnstsw %ax
andl $0x4500,%eax
cmpl $0x4100,%eax
jne Lfp_rtn_value
.globl GNAME(call_into_lisp_first_time)
TYPE(GNAME(call_into_lisp_first_time))
-/* The *ALIEN-STACK* pointer is set up on the first call_into_lisp when
- * the stack changes. We don't worry too much about saving registers
+/* We don't worry too much about saving registers
* here, because we never expect to return from the initial call to lisp
* anyway */
pushl %ebp # Save old frame pointer.
movl %esp,%ebp # Establish new frame.
#ifndef LISP_FEATURE_WIN32
- movl %esp,ALIEN_STACK + SYMBOL_VALUE_OFFSET
movl GNAME(all_threads),%eax
- movl THREAD_CONTROL_STACK_START_OFFSET(%eax) ,%esp
- /* don't think too hard about what happens if we get interrupted
- * here */
- addl $(THREAD_CONTROL_STACK_SIZE),%esp
+ /* pthread machinery takes care of this for other threads */
+ movl THREAD_CONTROL_STACK_END_OFFSET(%eax) ,%esp
#else
/* Win32 -really- doesn't like you switching stacks out from under it. */
movl GNAME(all_threads),%eax
#endif
/* Alloc new frame. */
- mov %esp,%ebx # The current sp marks start of new frame.
- push %ebp # fp in save location S0
- sub $8,%esp # Ensure 3 slots are allocated, one above.
- mov %ebx,%ebp # Switch to new frame.
+ push %ebp # Dummy for return address
+ push %ebp # fp in save location S1
+ mov %esp,%ebp # The current sp marks start of new frame.
+ sub $4,%esp # Ensure 3 slots are allocated, two above.
call *CLOSURE_FUN_OFFSET(%eax)
* the undefined-function trampoline
*/
.text
- .align align_4byte,0x90
+ .align align_16byte,0x90
.globl GNAME(undefined_tramp)
TYPE(GNAME(undefined_tramp))
.byte 0, 0, 0, SIMPLE_FUN_HEADER_WIDETAG
GNAME(undefined_tramp):
+ pop 4(%ebp) # Save return PC for backtrace.
TRAP
.byte trap_Error
.byte 2
* the closure trampoline
*/
.text
- .align align_4byte,0x90
+ .align align_16byte,0x90
.globl GNAME(closure_tramp)
TYPE(GNAME(closure_tramp))
.byte 0, 0, 0, SIMPLE_FUN_HEADER_WIDETAG
SIZE(GNAME(closure_tramp))
.text
- .align align_4byte,0x90
+ .align align_16byte,0x90
.globl GNAME(funcallable_instance_tramp)
TYPE(GNAME(funcallable_instance_tramp))
GNAME(funcallable_instance_tramp):
*/
.text
.globl GNAME(fun_end_breakpoint_guts)
- .align align_4byte
+ .align align_16byte
GNAME(fun_end_breakpoint_guts):
/* Multiple Value return */
jc multiple_value_return
\f
.globl GNAME(do_pending_interrupt)
TYPE(GNAME(do_pending_interrupt))
- .align align_4byte,0x90
+ .align align_16byte,0x90
GNAME(do_pending_interrupt):
TRAP
.byte trap_PendingInterrupt
#define ALLOC(size) \
pushl %ebp; /* Save EBP */ \
movl %esp,%ebp; /* Save ESP to EBP */ \
- andl $0xfffffff0,%esp; /* Align stack */ \
- pushl $0; /* Padding */ \
- pushl size; /* Argument to alloc */ \
- cld; /* Clear DF */ \
+ pushl $0; /* Reserve space for arg */ \
+ andl $0xfffffff0,%esp; /* Align stack to 16bytes */ \
+ movl size, (%esp); /* Argument to alloc */ \
call GNAME(alloc); \
movl %ebp,%esp; /* Restore ESP from EBP */ \
popl %ebp; /* Restore EBP */
#else
#define ALLOC(size) \
pushl size; /* Argument to alloc */ \
- cld; /* Clear DF */ \
call GNAME(alloc); \
addl $4,%esp; /* Pop argument */
#endif
#define DEFINE_ALLOC_TO_EAX(name,size) \
.globl GNAME(name); \
TYPE(GNAME(name)); \
- .align align_4byte,0x90; \
+ .align align_16byte,0x90; \
GNAME(name): \
pushl %ecx; /* Save ECX and EDX */ \
pushl %edx; \
#define DEFINE_ALLOC_TO_ECX(name,size) \
.globl GNAME(name); \
TYPE(GNAME(name)); \
- .align align_4byte,0x90; \
+ .align align_16byte,0x90; \
GNAME(name): \
pushl %eax; /* Save EAX and EDX */ \
pushl %edx; \
#define DEFINE_ALLOC_TO_EDX(name,size) \
.globl GNAME(name); \
TYPE(GNAME(name)); \
- .align align_4byte,0x90; \
+ .align align_16byte,0x90; \
GNAME(name): \
pushl %eax; /* Save EAX and ECX */ \
pushl %ecx; \
#define DEFINE_ALLOC_TO_REG(name,reg,size) \
.globl GNAME(name); \
TYPE(GNAME(name)); \
- .align align_4byte,0x90; \
+ .align align_16byte,0x90; \
GNAME(name): \
pushl %eax; /* Save EAX, ECX, and EDX */ \
pushl %ecx; \
/* This routine handles an overflow with eax=crfp+size. So the
size=eax-crfp. */
- .align align_4byte
+ .align align_16byte
.globl GNAME(alloc_overflow_eax)
TYPE(GNAME(alloc_overflow_eax))
GNAME(alloc_overflow_eax):
ret
SIZE(GNAME(alloc_overflow_eax))
- .align align_4byte
+ .align align_16byte
.globl GNAME(alloc_overflow_ecx)
TYPE(GNAME(alloc_overflow_ecx))
GNAME(alloc_overflow_ecx):
ret
SIZE(GNAME(alloc_overflow_ecx))
- .align align_4byte
+ .align align_16byte
.globl GNAME(alloc_overflow_edx)
TYPE(GNAME(alloc_overflow_edx))
GNAME(alloc_overflow_edx):
/* This routine handles an overflow with ebx=crfp+size. So the
size=ebx-crfp. */
- .align align_4byte
+ .align align_16byte
.globl GNAME(alloc_overflow_ebx)
TYPE(GNAME(alloc_overflow_ebx))
GNAME(alloc_overflow_ebx):
/* This routine handles an overflow with esi=crfp+size. So the
size=esi-crfp. */
- .align align_4byte
+ .align align_16byte
.globl GNAME(alloc_overflow_esi)
TYPE(GNAME(alloc_overflow_esi))
GNAME(alloc_overflow_esi):
ret
SIZE(GNAME(alloc_overflow_esi))
- .align align_4byte
+ .align align_16byte
.globl GNAME(alloc_overflow_edi)
TYPE(GNAME(alloc_overflow_edi))
GNAME(alloc_overflow_edi):
* and EIP from the exception context and use it to fake
* up a stack frame which will skip over the system SEH
* code. */
- .align align_4byte
+ .align align_16byte
.globl GNAME(exception_handler_wrapper)
TYPE(GNAME(exception_handler_wrapper))
GNAME(exception_handler_wrapper):
#endif
#ifdef LISP_FEATURE_DARWIN
- .align align_4byte
+ .align align_16byte
.globl GNAME(call_into_lisp_tramp)
TYPE(GNAME(call_into_lisp_tramp))
GNAME(call_into_lisp_tramp):
SIZE(call_into_lisp_tramp)
#endif
- .align align_4byte,0x90
+ .align align_16byte,0x90
.globl GNAME(post_signal_tramp)
TYPE(GNAME(post_signal_tramp))
GNAME(post_signal_tramp):
\f
.globl GNAME(fast_bzero_pointer)
.data
- .align align_4byte
+ .align align_16byte
GNAME(fast_bzero_pointer):
/* Variable containing a pointer to the bzero function to use.
* Initially points to a basic function. Change this variable
.long GNAME(fast_bzero_base)
\f
.text
- .align align_8byte,0x90
+ .align align_16byte,0x90
.globl GNAME(fast_bzero)
TYPE(GNAME(fast_bzero))
GNAME(fast_bzero):
\f
.text
- .align align_8byte,0x90
+ .align align_16byte,0x90
.globl GNAME(fast_bzero_detect)
TYPE(GNAME(fast_bzero_detect))
GNAME(fast_bzero_detect):
\f
.text
- .align align_8byte,0x90
+ .align align_16byte,0x90
.globl GNAME(fast_bzero_sse)
TYPE(GNAME(fast_bzero_sse))
\f
.text
- .align align_8byte,0x90
+ .align align_16byte,0x90
.globl GNAME(fast_bzero_base)
TYPE(GNAME(fast_bzero_base))
xor %eax, %eax /* Zero EAX */
shr $2, %ecx /* Amount of 4-byte blocks to copy */
jz Lend_base
- cld /* Set direction of STOSL to increment */
rep
stosl /* Store EAX to *EDI, ECX times, incrementing
\f
END()
-
\ No newline at end of file
projects / sbcl.git / blobdiff